Download or read book Formalisms for Reuse and Systems Integration written by Thouraya Bouabana-Tebibel and published by Springer. This book was released on 2015-03-27 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reuse and integration are defined as synergistic concepts, where reuse addresses how to minimize redundancy in the creation of components; while, integration focuses on component composition. Integration supports reuse and vice versa. These related concepts support the design of software and systems for maximizing performance while minimizing cost. Knowledge, like data, is subject to reuse; and, each can be interpreted as the other. This means that inherent complexity, a measure of the potential utility of a system, is directly proportional to the extent to which it maximizes reuse and integration. Formal methods can provide an appropriate context for the rigorous handling of these synergistic concepts. Furthermore, formal languages allow for non ambiguous model specification; and, formal verification techniques provide support for insuring the validity of reuse and integration mechanisms. This edited book includes 12 high quality research papers written by experts in formal aspects of reuse and integration to cover the most recent advances in the field. These papers are extended versions of some of the best papers, which were presented at the IEEE International Conference on Information Reuse and Integration and the IEEE International Workshop on Formal Methods Integration - both of which were held in San Francisco in August 2014.
Download or read book Formal Techniques for Safety Critical Systems written by Osman Hasan and published by Springer Nature. This book was released on 2020-04-25 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 7th International Workshop on Formal Techniques for Safety-Critical Systems, FTSCS 2019, held in Shenzhen, China, in November 2019. The 6 revised full papers presented were carefully reviewed and selected from 17 submissions. Additionally, the volume presents 1 invited paper, 1 tool paper, and 1 work in progrerss. The papers are focused on the topics of the use of formal methods for analyzing safety-critical systems; methods, techniques and tools to support automated analysis, certication, debugging, etc., of complex safety/QoS-critical systems; analysis methods that address the limitations of formal methods in industry (usability, scalability, etc.); formal analysis support for modeling languages used in industry; code generation from validated models.
Download or read book Integrated Formal Methods written by Erika Ábrahám and published by Springer. This book was released on 2016-05-23 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 12th International Conference on Integrated Formal Methods, IFM 2016, held in Reykjavik, Iceland, in June 2016. The 33 papers presented in this volume were carefully reviewed and selected from 99 submissions. They were organized in topical sections named: invited contributions; program verification; probabilistic systems; concurrency; safety and liveness; model learning; SAT and SMT solving; testing; theorem proving and constraint satisfaction; case studies.
Download or read book IFM 99 written by Keijiro Araki and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Formal methods have been established as the rigorous engineering methodology for the system development. Applying formal methods to a large and complex system development often requires the modelling of different aspects of such a system. For instance, complex systems (such as integrated avionics systems, engine control software) can involve functional and timing requirements that must be eventually implemented as executing code on a communicating distributed topology. This book contains the papers presented at the First International Workshop on Integrated Formal Methods, held at the University of York in June 1999. The conference provided a forum for the discussion of theoretical aspects of combing behavioural and state-based formalisms and practical solutions to the industrial problems of this approach.
Download or read book Information Reuse and Integration in Academia and Industry written by Tansel Özyer and published by Springer Science & Business Media. This book was released on 2013-11-08 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present work covers the latest developments and discoveries related to information reuse and integration in academia and industrial settings. The need for dealing with the large volumes of data being produced and stored in the last decades and the numerous systems developed to deal with these is increasingly necessary. Not all these developments could have been achieved without the investing large amounts of resources. Over time, new data sources evolve and data integration continues to be an essential and vital requirement. Furthermore, systems and products need to be revised to adapt new technologies and needs. Instead of building these from scratch, researchers in the academia and industry have realized the benefits of reusing existing components that have been well tested. While this trend avoids reinventing the wheel, it comes at the cost of finding the optimum set of existing components to be utilized and how they should be integrated together and with the new non-existing components which are to be developed. These nontrivial tasks have led to challenging research problems in the academia and industry. These issues are addressed in this book, which is intended to be a unique resource for researchers, developers and practitioners.
Download or read book Integration of Reusable Systems written by Thouraya Bouabana-Tebibel and published by Springer Science & Business Media. This book was released on 2014-02-17 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software reuse and integration has been described as the process of creating software systems from existing software rather than building software systems from scratch. Whereas reuse solely deals with the artifacts creation, integration focuses on how reusable artifacts interact with the already existing parts of the specified transformation. Currently, most reuse research focuses on creating and integrating adaptable components at development or at compile time. However, with the emergence of ubiquitous computing, reuse technologies that can support adaptation and reconfiguration of architectures and components at runtime are in demand. This edited book includes 15 high quality research papers written by experts in information reuse and integration to cover the most recent advances in the field. These papers are extended versions of the best papers which were presented at IEEE International Conference on Information Reuse and Integration and IEEE International Workshop on Formal Methods Integration, which was held in San Francisco in August 2013.
Download or read book Balancing Agility and Formalism in Software Engineering written by Bertrand Meyer and published by Springer Science & Business Media. This book was released on 2008-08-13 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-conference proceedings of the Second IFIP TC 2 Central and East Conference on Software Engineering Techniques, CEE-SET 2007, held in Poznan, Poland, in October 2007. The 21 revised full papers presented together with 2 keynote addresses were carefully reviewed and selected from 73 initial submissions. The papers are organized in topical sections on measurement, processes, UML, experiments, tools, and change.
Download or read book Validated Designs for Object oriented Systems written by John Fitzgerald and published by Springer Science & Business Media. This book was released on 2005-02-03 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to practical formal modelling techniques in the context of object-oriented system design. It is aimed at both practising software engineers with some prior experience of object-oriented design/programming and at intermediate or advanced students studying object-oriented design or modelling in a short course. The following features make this book particularly attractive to potential instructors: § The relationship with UML and object-oriented programming makes it easy to integrate with the mainstream computing curriculum. Although the book is about formal methods, it does not have to be treated as a specialist topic. § The use of tools and an accessible modelling language improves student motivation. § The industry-based examples and case studies add to the credibility of the approach. § The light touch approach means that the material appeals to students with a wider range of abilities than is the case in a conventional formal methods text. § Support materials as listed above.
Download or read book Integrated Formal Methods written by Elvira Albert and published by Springer. This book was released on 2014-08-29 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 11th International Conference on Integrated Formal Methods, IFM 2014, held in Bertinoro, Italy, in September 2014. The 21 revised full papers presented together with 2 invited papers were carefully reviewed and selected from 43 submissions. The papers have been organized in the following topical sections: tool integration; model verification; program development; security analysis; analysis and transformation; and concurrency and control.
Download or read book Fundamental Approaches to Software Engineering written by Ralf-Detlef Kutsche and published by Springer. This book was released on 2003-08-01 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: ETAPS 2002 was the ?fth instance of the European Joint Conferences on Theory and Practice of Software. ETAPS is an annual federated conference that was established in 1998by combining a number of existing and new conferences. This year it comprised 5 conferences (FOSSACS, FASE, ESOP, CC, TACAS), 13 satellite workshops (ACL2, AGT, CMCS, COCV, DCC, INT, LDTA, SC, SFEDL, SLAP, SPIN, TPTS, and VISS), 8invited lectures (not including those speci?c to the satellite events), and several tutorials. The events that comprise ETAPS address various aspects of the system - velopment process, including speci?cation, design, implementation, analysis, and improvement. The languages, methodologies, and tools which support these - tivities are all well within its scope. Di?erent blends of theory and practice are represented, with an inclination towards theory with a practical motivation on one hand and soundly-based practice on the other. Many of the issues involved in software design apply to systems in general, including hardware systems, and the emphasis on software is not intended to be exclusive.
Download or read book Quantitative Assessments of Distributed Systems written by Dario Bruneo and published by John Wiley & Sons. This book was released on 2015-04-13 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distributed systems employed in critical infrastructures must fulfill dependability, timeliness, and performance specifications. Since these systems most often operate in an unpredictable environment, their design and maintenance require quantitative evaluation of deterministic and probabilistic timed models. This need gave birth to an abundant literature devoted to formal modeling languages combined with analytical and simulative solution techniques The aim of the book is to provide an overview of techniques and methodologies dealing with such specific issues in the context of distributed systems and covering aspects such as performance evaluation, reliability/availability, energy efficiency, scalability, and sustainability. Specifically, techniques for checking and verifying if and how a distributed system satisfies the requirements, as well as how to properly evaluate non-functional aspects, or how to optimize the overall behavior of the system, are all discussed in the book. The scope has been selected to provide a thorough coverage on issues, models. and techniques relating to validation, evaluation and optimization of distributed systems. The key objective of this book is to help to bridge the gaps between modeling theory and the practice in distributed systems through specific examples.
Download or read book Quality Software Through Reuse and Integration written by Stuart H. Rubin and published by Springer. This book was released on 2017-08-15 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents 13 high-quality research articles that provide long sought-after answers to questions concerning various aspects of reuse and integration. Its contents lead to the inescapable conclusion that software, hardware, and design productivity – including quality attributes – is not bounded. It combines the best of theory and practice and contains recipes for increasing the output of our productivity sectors. The idea of improving software quality through reuse is not new. After all, if software works and is needed, why not simply reuse it? What is new and evolving, however, is the idea of relative validation through testing and reuse, and the abstraction of code into frameworks for instantiation and reuse. Literal code can be abstracted. These abstractions can in turn yield similar codes, which serve to verify their patterns. There is a taxonomy of representations from the lowest-level literal codes to their highest-level natural language descriptions. As a result, product quality is improved in proportion to the degree of reuse at all levels of abstraction. Any software that is, in theory, complex enough to allow for self-reference, cannot be certified as being absolutely valid. The best that can be attained is a relative validity, which is based on testing. Axiomatic, denotational, and other program semantics are more difficult to verify than the codes, which they represent! But, are there any limits to testing? And how can we maximize the reliability of software or hardware products through testing? These are essential questions that need to be addressed; and, will be addressed herein.
Download or read book Formal Methods in Systems Biology written by Jasmin Fisher and published by Springer Science & Business Media. This book was released on 2008-05-26 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thisvolumecontainstheproceedingsofthe?rstinternationalmeetingonFormal Methods in Systems Biology, held at Microsoft Research, Cambridge, UK, June 4–5, 2008. While there are several venues that cover computational methods in systems biology,there is to date no single conference that brings together the application of the range of formal methods in biology. Therefore, convening such a meeting could prove extremely productive. The purpose of this meeting was to identify techniques for the speci?cation, development and veri?cation of biological m- els.Italsofocusedonthedesignoftoolstoexecuteandanalyzebiologicalmodels in ways that can signi?cantly advance our understanding of biological systems. As a forum for this discussion we invited key scientists in the area of formal methods to this unique meeting. Although this was a one-o? meeting, we are exploring the possibility of this forming the ?rst of what might become an annual conference. Presentations at the meeting were by invitation only; future meetings are expected to operate on a submission and review basis. The Steering Committee and additional referees reviewed the invited papers. Each submission was evaluated by at least two referees. The volume includes nine invited contributions. Formal Methods in Systems Biology 2008 was made possible by the cont- bution and dedication ofmany people. First of all,we wouldlike to thank allthe authors who submitted papers. Secondly, we would like to thank our additional invited speakers and participants. We would also like to thank the members of the Steering Committee for their valuable comments. Finally, we ackno- edge the help of the administrative and technical sta? at the MicrosoftResearch Cambridge lab.
Download or read book Formal Methods in Circuit Design written by Victoria Stavridou and published by Cambridge University Press. This book was released on 1993-07-22 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graduate level account of hardware verification and algebraic specification.
Download or read book Theory of Modeling and Simulation written by Bernard P. Zeigler and published by Academic Press. This book was released on 2018-08-14 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory of Modeling and Simulation: Discrete Event & Iterative System Computational Foundations, Third Edition, continues the legacy of this authoritative and complete theoretical work. It is ideal for graduate and PhD students and working engineers interested in posing and solving problems using the tools of logico-mathematical modeling and computer simulation. Continuing its emphasis on the integration of discrete event and continuous modeling approaches, the work focuses light on DEVS and its potential to support the co-existence and interoperation of multiple formalisms in model components. New sections in this updated edition include discussions on important new extensions to theory, including chapter-length coverage of iterative system specification and DEVS and their fundamental importance, closure under coupling for iteratively specified systems, existence, uniqueness, non-deterministic conditions, and temporal progressiveness (legitimacy). - Presents a 40% revised and expanded new edition of this classic book with many important post-2000 extensions to core theory - Provides a streamlined introduction to Discrete Event System Specification (DEVS) formalism for modeling and simulation - Packages all the "need-to-know" information on DEVS formalism in one place - Expanded to include an online ancillary package, including numerous examples of theory and implementation in DEVS-based software, student solutions and instructors manual
Download or read book Application and Theory of Petri Nets and Concurrency written by Lars Michael Kristensen and published by Springer Nature. This book was released on with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Trends in Software Methodologies Tools and Techniques written by Hamido Fujita and published by IOS Press. This book was released on 2002 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation. The Lyee International Workshop (Lyee-W02) is a means for presenting the results of the Lyee International research project, oriented for new software generation techniques based on Lyee technologies. Lyee-W02 will help to build a forum for exchanging ideas and experiences in the field of new directions on software development methodologies and its tools and techniques. Lyee methodology captures the essence of the innovations, controversies, challenges, and possible solutions of the software industry. This theory is born from experience and it is the time to stimulate the academic research on software science initiated from experience to theory through this workshop and its coming series.
