Download or read book Fly Cutting Technology for Ultra precision Machining written by and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fly Cutting Technology for Ultra precision Machining written by Suet To and published by Springer Nature. This book was released on 2023-09-24 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook covers the fly cutting technique, an ultra-precision mechanical machining technology which is regarded as the fastest and most reliable low-cost machining method to generate high quality complex surfaces. The ultra-precision raster milling provides more flexibility and suitability for freeform and structural surfaces with a uniform quality with sub-micrometric form error and nanometric surface roughness. These surfaces are widely applied into optics, medicine, biotechnology, electronics, and communications. The fundamental and latest advancing knowledge of fly-cutting technology is important for the future development and applications in ultra-precision mechanical machining technology. This book provides a good reference for fly-cutting technology in ultra-precision machining for undergraduate and postgraduate students, researchers, engineers, and postdoctoral fellow in advanced manufacturing area. It gives the audience an overview of the working principles, process mechanism, salient features, applications, and research directions of ultra-precision fly-cutting technology.
Download or read book Ultra precision High Performance Cutting written by Ekkard Brinksmeier and published by Springer Nature. This book was released on 2021-09-20 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the research report of the DFG Research Unit FOR 1845 (2014-2020) of the Universities of Bremen and Hannover. The thematic focus lies on speeding up ultra-precision machining technology by following a holistic approach to high-performance cutting. This includes ultra-precision milling at high spindle speeds (>10000 rpm), precision tool setting mechanisms for multi-cutting-edge diamond milling tools, magnetic levitation technology for high velocity feed axes, and dedicated control strategies for error identification and compensation at high speeds. Furthermore, automation and measurement aspects of the machine setup process especially for precision balancing of the spindle rotors are presented. Finally, it is demonstrated that how the developed technologies may be integrated into a common machine tool setup. The target audience primarily comprises research experts and practitioners in production engineering, but the book may also be of interest to graduate students alike.
Download or read book Simulation and Experiments of Material Oriented Ultra Precision Machining written by Junjie Zhang and published by Springer. This book was released on 2018-12-31 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultra-precision machining is a promising solution for achieving excellent machined surface quality and sophisticated micro/nano-structures that influence the applications of components and devices. Further, given the ultrathin layer of material removed, it is a highly coupled process between cutting tool and material. In this book, scientists in the fields of mechanical engineering and materials science from China, Ukraine, Japan, Singapore present their latest research findings regarding the simulation and experiment of material-oriented ultra-precision machining. Covering various machining methods (cutting, grinding, polishing, ion beam and laser machining) and materials (metal, semiconductor and hard-brittle ceramics), it mainly focuses on the evaluation of the fundamental mechanisms and their implementation in processing optimization for different materials. It is of significant theoretical and practical value for guiding the fabrication of ultra-smooth and functional surfaces using ultra-precision machining.
Download or read book Advanced Machining Processes written by Angelos P. Markopoulos and published by CRC Press. This book was released on 2017-11-23 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling and machining are two terms closely related. The benefits of the application of modeling on machining are well known. The advances in technology call for the use of more sophisticated machining methods for the production of high-end components. In turn, more complex, more suitable, and reliable modeling methods are required. This book pertains to machining and modeling, but focuses on the special aspects of both. Many researchers in academia and industry, who are looking for ways to refine their work, make it more detailed, increase their accuracy and reliability, or implement new features, will gain access to knowledge in this book that is very scare to find elsewhere.
Download or read book Proceedings of the 2nd International Conference on Mechanical System Dynamics written by Xiaoting Rui and published by Springer Nature. This book was released on with total page 4383 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Emerging Technology in Precision Engineering XIV written by Tojiro Aoyama and published by Trans Tech Publications Ltd. This book was released on 2012-11-12 with total page 1140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). These 189 conference papers cover a wide variety of topical areas, including: high-precision machining, non-conventional machining, CAD/CAM technology, machine tools and control, MEMS/NEMS, precision/medical devices, mechatronics, mechanical design and tribology, metrology, green manufacturing, advanced molding and forming and other related technologies. This work will certainly stimulate further research and development in the field of precision engineering.
Download or read book Engineered Technologies in Materials Science Geotechnics Environment and Mechanical Engineering written by J.C. Wang and published by Trans Tech Publications Ltd. This book was released on 2013-02-27 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: The collection covers selected, peer reviewed papers from the 2012 International Conference on Engineering Materials, Geotechnical Engineering and Environmental Engineering (EMGEEE 2012), October 26-28, 2012, Shijiazhuang, Hebei, China. The papers are grouped as follows: Chapter 1: Advanced Technologies in Materials Science and Chemical Engineering; Chapter 2: Biochemistry and Microbiology; Chapter 3: Geotechnical Engineering; Chapter 4: Applied Mechanics and Advances in Mechanical Engineering; Chapter 5: Power Engineering; Chapter 6: Technologies of Control and Measurement. Industrial Electronics; Chapter 7: Networks and Information Technologies. Applied Methods of Computing; Chapter 8: Engineering Management and Environmental Engineering.
Download or read book Precision Assembly Technologies for Mini and Micro Products written by Svetan Ratchev and published by Springer. This book was released on 2006-08-17 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: These contributions to the 3rd IPAS'2006 seminar are grouped in 6 sections. Part 1 reviews new techniques for handling and feeding micro parts. Micro-robotics and robot applications for micro assembly are discussed in Part 2. An overview of different design and planning applications for microassembly is provided in Part 3. Part 4 covers reconfigurable and modular micro assembly systems and control applications. The economic aspects of microassembly including new business models are discussed in Part 5 while Part 6 presents specific technical solutions and microassembly applications.
Download or read book Micro Cutting written by Dehong Huo and published by John Wiley & Sons. This book was released on 2013-07-30 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-Cutting: Fundamentals and Applications comprehensively covers the state of the art research and engineering practice in micro/nano cutting: an area which is becoming increasingly important, especially in modern micro-manufacturing, ultraprecision manufacturing and high value manufacturing. This book provides basic theory, design and analysis of micro-toolings and machines, modelling methods and techniques, and integrated approaches for micro-cutting. The fundamental characteristics, modelling, simulation and optimization of micro/nano cutting processes are emphasized with particular reference to the predictabilty, producibility, repeatability and productivity of manufacturing at micro and nano scales. The fundamentals of micro/nano cutting are applied to a variety of machining processes including diamond turning, micromilling, micro/nano grinding/polishing, ultraprecision machining, and the design and implementation of micro/nano cutting process chains and micromachining systems. Key features • Contains contributions from leading global experts • Covers the fundamental theory of micro-cutting • Presents applications in a variety of machining processes • Includes examples of how to implement and apply micro-cutting for precision and micro-manufacturing Micro-Cutting: Fundamentals and Applications is an ideal reference for manufacturing engineers, production supervisors, tooling engineers, planning and application engineers, as well as machine tool designers. It is also a suitable textbook for postgraduate students in the areas of micro-manufacturing, micro-engineering and advanced manufacturing methods.
Download or read book Materials Characterisation and Mechanism of Micro Cutting in Ultra Precision Diamond Turning written by Sandy Suet To and published by Springer. This book was released on 2017-05-23 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an in-depth study and elucidation on the mechanisms of the micro-cutting process, with particular emphasis and a novel viewpoint on materials characterization and its influences on ultra-precision machining. Ultra-precision single point diamond turning is a key technology in the manufacture of mechanical, optical and opto-electronics components with a surface roughness of a few nanometers and form accuracy in the sub-micrometric range. In the context of subtractive manufacturing, ultra-precision diamond turning is based on the pillars of materials science, machine tools, modeling and simulation technologies, etc., making the study of such machining processes intrinsically interdisciplinary. However, in contrast to the substantial advances that have been achieved in machine design, laser metrology and control systems, relatively little research has been conducted on the material behavior and its effects on surface finish, such as the material anisotropy of crystalline materials. The feature of the significantly reduced depth of cut on the order of a few micrometers or less, which is much smaller than the average grain size of work-piece materials, unavoidably means that conventional metal cutting theories can only be of limited value in the investigation of the mechanisms at work in micro-cutting processes in ultra-precision diamond turning.
Download or read book Large and Middle scale Aperture Aspheric Surfaces written by Shengyi Li and published by John Wiley & Sons. This book was released on 2017-01-18 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete all-in-one reference to aspheric fabricationand testing for optical applications This book provides a detailed introduction to the manufacturingand measurement technologies in aspheric fabrication. For eachtechnology, both basic theory and practical applications areintroduced. The book consists of two parts. In the first part, the basicprinciples of manufacturing technology for aspheric surfaces andkey theory for deterministic subaperture polishing of asphericsurfaces are discussed. Then key techniques for high precisionfiguring such as CCOS with small polishing pad, IBF and MRF, areintroduced, including the basic principles, theories andapplications, mathematical modeling methods, machine design andprocess parameter selection. It also includes engineeringpractices and experimental results, based on the three kinds ofpolishing tools (CCOS, IBF and MRF) developed by the author’s research team. In the second part, basic principles of measurement and sometypical examples for large and middle-scale aspheric surfaces arediscussed. Then, according to the demands of low cost, highaccuracy and in-situ measurement methods in the manufacturingprocess, three kinds of technologies are introduced, such as theCartesian and swing-arm polar coordinate profilometer, thesub-aperture stitching interferometer and the phase retrievalmethod based on diffraction principle. Some key techniques are alsodiscussed, including the basic principles, mathematical modelingmethods, machine design and process parameter selection, as well asengineering practices and experimental results. Finally, theteam’s research results about subsurface quality measurementand guarantee methods are also described. This book can be used as a reference for scientists andtechnologists working in optical manufacturing, ultra-precisionmachining, precision instruments and measurement, and otherprecision engineering fields. A complete all-in-one reference to aspheric fabrication andtesting for optical applications Presents the latest research findings from the author’sinternationally recognized leading team who are at the cutting edgeof the technology Brings together surface processing and measurement in onecomplete volume, discussing problems and solutions Guides the reader from an introductory overview through to moreadvanced and sophisticated techniques of metrology andmanufacturing, suitable for the student and the industryprofessional
Download or read book Machinery Electronics and Control Engineering III written by Jian Feng Li and published by Trans Tech Publications Ltd. This book was released on 2013-12-04 with total page 1140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 2013 3rd International Conference on Machinery Electronics and Control Engineering (ICMECE 2013), November 29-30, 2013, Jinan, Shandong, China. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 241 papers are grouped as follows: Chapter 1: Development and Processing of Innovative Materials; Chapter 2: Electronic and Semiconductor Devices; Chapter 3: Power Systems and Applied Electronics; Chapter 4: Measurement and Monitoring of Systems; Chapter 5: Modelling, Simulation and Optimization; Chapter 6: Analysis and Design of Structures and Machines; Chapter 7: Data and Signal Processing; Chapter 8: Neural Network and Applied Algorithms; Chapter 9: Control Systems; Chapter 10: Communication Systems, Network and Information Technologies; Chapter 11: Technologies in Manufacture and Engineering Management.
Download or read book 4M 2005 First International Conference on Multi Material Micro Manufacture written by Stefan Dimov and published by Elsevier. This book was released on 2005-12-07 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: 4M 2005 - First International Conference on Multi-Material Micro Manufacture
Download or read book CIRP Annals written by International Institution for Production Engineering Research and published by . This book was released on 1993 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 3rd Annual International Conference on Material Machines and Methods for Sustainable Development MMMS2022 written by Banh Tien Long and published by Springer Nature. This book was released on 2023-08-29 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected, peer-reviewed proceedings of the 3rd International Conference on Material, Machines and Methods for Sustainable Development (MMMS2022), held in the city of Can Tho, Vietnam, from 10 to 13 November 2022. The purpose of the conference is to explore and ensure an understanding of the critical aspects contributing to sustainable development with a focus on advanced mechanical engineering, automation, materials, machines and methods. The contributions published in this book come from authors representing universities, research institutes and industrial companies and reflect the results of a very broad spectrum of research, from micro- and nanoscale materials design and processing, to mechanical engineering technology in industry. Many of the contributions selected for these proceedings focus on materials modeling, eco-material processes and mechanical manufacturing. Volume 1 of this book focuses on topics dedicated to advanced materials and manufacturing technologies, ranging from synthesis of new materials to sustainable development manufacturing technology.
Download or read book Microfabrication and Nanomanufacturing written by Mark J. Jackson and published by CRC Press. This book was released on 2005-11-10 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology, seen as the next leap forward in the industrial revolution, requires that manufacturers develop processes that revolutionize the way small products are made. Microfabrication and Nanomanufacturing focuses on the technology of fabrication and manufacturing of engineering materials at these levels. The book provides an overview of techniques used in the semiconductor industry. It also discusses scaling and manufacturing processes operating at the nanoscale for non-semiconductor applications; the construction of nanoscale components using established lithographic techniques; bulk and surface micromachining techniques used for etching, machining, and molding procedures; and manufacturing techniques such as injection molding and hot embossing. This authoritative compilation describes non-traditional micro and nanoscale processing that uses a newly developed technique called pulsed water jet machining as well as the efficient removal of materials using optical energy. Additional chapters focus on the development of nanoscale processes for producing products other than semiconductors; the use of abrasive particles embedded in porous tools; and the deposition and application of nanocrystalline diamond. Economic factors are also presented and concern the promotion and commercialization of micro and nanoscale products and how demand will eventually drive the market.
