Download or read book Fundamentals of Geomorphology written by Richard John Huggett and published by Routledge. This book was released on 2011-03-15 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: This extensively revised, restructured, and updated edition continues to present an engaging and comprehensive introduction to the subject, exploring the world’s landforms from a broad systems perspective. It covers the basics of Earth surface forms and processes, while reflecting on the latest developments in the field. Fundamentals of Geomorphology begins with a consideration of the nature of geomorphology, process and form, history, and geomorphic systems, and moves on to discuss: structure: structural landforms associated with plate tectonics and those associated with volcanoes, impact craters, and folds, faults, and joints process and form: landforms resulting from, or influenced by, the exogenic agencies of weathering, running water, flowing ice and meltwater, ground ice and frost, the wind, and the sea; landforms developed on limestone; and landscape evolution, a discussion of ancient landforms, including palaeosurfaces, stagnant landscape features, and evolutionary aspects of landscape change. This third edition has been fully updated to include a clearer initial explanation of the nature of geomorphology, of land surface process and form, and of land-surface change over different timescales. The text has been restructured to incorporate information on geomorphic materials and processes at more suitable points in the book. Finally, historical geomorphology has been integrated throughout the text to reflect the importance of history in all aspects of geomorphology. Fundamentals of Geomorphology provides a stimulating and innovative perspective on the key topics and debates within the field of geomorphology. Written in an accessible and lively manner, it includes guides to further reading, chapter summaries, and an extensive glossary of key terms. The book is also illustrated throughout with over 200 informative diagrams and attractive photographs, all in colour.

Download or read book Impact Behaviour of Fibre Reinforced Composite Materials and Structures written by S. R. Reid and published by Elsevier. This book was released on 2000-10-12 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study covers impact response, damage tolerance and failure of fibre-reinforced composite materials and structures. Materials development, analysis and prediction of structural behaviour and cost-effective design all have a bearing on the impact response of composites and this book brings together for the first time the most comprehensive and up-to-date research work from leading international experts. - State of the art analysis of impact response, damage tolerance and failure of FRC materials - Distinguished contributors provide expert analysis of the most recent materials and structures - Valuable tool for R&D engineers, materials scientists and designers

Download or read book Materials and Processes written by Barrie D. Dunn and published by Springer. This book was released on 2015-12-29 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to assist scientists and engineers select the ideal material or manufacturing process for particular applications; these could cover a wide range of fields, from light-weight structures to electronic hardware. The book will help in problem solving as it also presents more than 100 case studies and failure investigations from the space sector that can, by analogy, be applied to other industries. Difficult-to-find material data is included for reference. The sciences of metallic (primarily) and organic materials presented throughout the book demonstrate how they can be applied as an integral part of spacecraft product assurance schemes, which involve quality, material and processes evaluations, and the selection of mechanical and component parts. In this successor edition, which has been revised and updated, engineering problems associated with critical spacecraft hardware and the space environment are highlighted by over 500 illustrations including micrographs and fractographs. Space hardware captured by astronauts and returned to Earth from long durations in space are examined. Information detailed in the Handbook is applicable to general terrestrial applications including consumer electronics as well as high reliability systems associated with aeronautics, medical equipment and ground transportation. This Handbook is also directed to those involved in maximizing the relia bility of new materials and processes for space technology and space engineering. It will be invaluable to engineers concerned with the construction of advanced structures or mechanical and electronic sub-systems.

Download or read book Adhesion Science and Engineering written by and published by Elsevier. This book was released on 2002-11-14 with total page 2020 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Mechanics of Adhesion shows that adhesion science and technology is inherently an interdisciplinary field, requiring fundamental understanding of mechanics, surfaces, and materials. This volume comprises 19 chapters. Starting with a background and introduction to stress transfer principles; fracture mechanics and singularities; and an energy approach to debonding, the volume continues with analysis of structural lap and butt joint configurations. It then continues with discussions of test methods for strength and constitutive properties; fracture; peel; coatings, the case of adhesion to a single substrate; elastomeric adhesives such as sealants. The role of mechanics in determining the locus of failure in bonded joints is discussed, followed by a chapter on rheology relevant to adhesives and sealants. Pressure sensitive adhesive performance; the principles of tack and tack measurements; and contact mechanics relevant to wetting and surface energy measurements are then covered. The volume concludes with sections on fibermatrix bonding and reinforcement; durability considerations for adhesive bonds; ultrasonic non-destructive evaluation of adhesive bonds; and design of adhesive bonds from a strength perspective. This book will be of interest to practitioners in the fields of engineering and to those with an interest in adhesion science.

Download or read book Direct and Large Eddy Simulation XII written by Manuel García-Villalba and published by Springer Nature. This book was released on 2020-05-09 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 12th instalment in the bi-annual Workshop series on Direct and Large Eddy Simulation (DLES), which began in 1994 and focuses on modern techniques used to simulate turbulent flows based on the partial or full resolution of the instantaneous turbulent flow structure. With the rapidly expanding capacities of modern computers, this approach has attracted more and more interest over the years and will undoubtedly be further enhanced and applied in the future. Hybrid modelling techniques based on a combination of LES and RANS approaches also fall into this category and are covered as well. The goal of the Workshop was to share the state of the art in DNS, LES and related techniques for the computation and modelling of turbulent and transitional flows. The respective papers highlight the latest advances in the prediction, understanding and control of turbulent flows in academic and industrial applications.

Download or read book Wound Care written by Carrie Sussman and published by Lippincott Williams & Wilkins. This book was released on 2007 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for health care professionals in multiple disciplines and clinical settings, this comprehensive, evidence-based wound care text provides basic and advanced information on wound healing and therapies and emphasizes clinical decision-making. The text integrates the latest scientific findings with principles of good wound care and provides a complete set of current, evidence-based practices. This edition features a new chapter on wound pain management and a chapter showing how to use negative pressure therapy on many types of hard-to-heal wounds. Technological advances covered include ultrasound for wound debridement, laser treatments, and a single-patient-use disposable device for delivering pulsed radio frequency.

Download or read book Airframe and Powerplant Mechanics Airframe Handbook written by United States. Flight Standards Service and published by . This book was released on 1976 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Jubb Kennedy Palmer s Pathology of Domestic Animals Volume 1 written by Grant Maxie and published by Elsevier Health Sciences. This book was released on 2015-08-16 with total page 1250 pages. Available in PDF, EPUB and Kindle. Book excerpt: With an emphasis on the disease conditions of dogs, cats, horses, swine, cattle and small ruminants, Jubb, Kennedy, and Palmer's Pathology of Domestic Animals, 6th Edition continues its long tradition of being the most comprehensive reference book on common domestic mammal pathology. Using a body systems approach, veterinary pathology experts provide overviews of general system characteristics, reactions to insult, and disease conditions that are broken down by type of infectious or toxic insult affecting the anatomical subdivisions of each body system. The sixth edition now boasts a new full-color design, including more than 2,000 high-resolution images of normal and abnormal organs, tissues, and cells. Updated content also includes evolved coverage of disease agents such as the Schmallenberg virus, porcine epidemic diarrhea virus, and the porcine deltacoronavirus; plus new information on molecular-based testing, including polymerase chain reaction (PCR) and in-situ hybridization, keep you abreast of the latest diagnostic capabilities. - Updated content includes new and evolving pathogens and diagnostic techniques. - Updated bibliographies give readers new entry points into the rapidly expanding literature on each subject. - NEW! High-resolution color images clearly depict the diagnostic features of hundreds of conditions. - NEW! Introduction to the Diagnostic Process chapter illustrates the whole animal perspective and details the approaches to systemic, multi-system, and polymicrobial disease. - NEW! Coverage of camelids is now included in the reference's widened scope of species. - NEW! Team of 30+ expert contributors offers the latest perspective on the continuum of issues in veterinary pathology. - NEW! Expanded resources on the companion website include a variety of helpful tools such as full reference lists with entries linked to abstracts in Pub Med and bonus web-only figures. - NEW! Full-color design improves the accessibility of the text.

Download or read book Failure Analysis of Heat Treated Steel Components written by Lauralice de Campos Franceschini Canale and published by ASM International. This book was released on 2008 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Coatings Technology Handbook written by Arthur A. Tracton and published by CRC Press. This book was released on 2005-07-28 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serving as an all-in-one guide to the entire field of coatings technology, this encyclopedic reference covers a diverse range of topics-including basic concepts, coating types, materials, processes, testing and applications-summarizing both the latest developments and standard coatings methods. Take advantage of the insights and experience of over

Download or read book Moon written by Viorel Badescu and published by Springer Science & Business Media. This book was released on 2012-03-22 with total page 771 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Earth has limited material and energy resources. Further development of the humanity will require going beyond our planet for mining and use of extraterrestrial mineral resources and search of power sources. The exploitation of the natural resources of the Moon is a first natural step on this direction. Lunar materials may contribute to the betterment of conditions of people on Earth but they also may be used to establish permanent settlements on the Moon. This will allow developing new technologies, systems and flight operation techniques to continue space exploration. In fact, a new branch of human civilization could be established permanently on Moon in the next century. But, meantime, an inventory and proper social assessment of Moon’s prospective energy and material resources is required. This book investigates the possibilities and limitations of various systems supplying manned bases on Moon with energy and other vital resources. The book collects together recent proposals and innovative options and solutions. It is a useful source of condensed information for specialists involved in current and impending Moon-related activities and a good starting point for young researchers.

Download or read book Design and Construction of RCRA CERCLA Final Covers written by United States. Environmental Protection Agency and published by . This book was released on 1991 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Conservation of the Last Judgment Mosaic St Vitus Cathedral Prague written by Francesca Piqué and published by Getty Publications. This book was released on 2004 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Illustrated in color throughout, this handsome volume presents selected papers from an international symposium held in June 2001 marking the completion of a ten-year project to conserve the Last Judgment mosaic, at St. Vitus Cathedral in Prague. The project was a partnership between the Office of the President of the Czech Republic, the Prague Castle Administration, and the Getty Conservation Institute. The goal of the symposium was to present the methodology, research, and results of the project, which involved conserving one of the finest examples of monumental medieval mosaic art in Europe. The volume's essays are divided into three parts, which cover the historical and art-historical context, conservation planning and methodology, and project implementation and maintenance. Topics addressed include the history, iconography, and visual documentation of the mosaic; the development and application of surface cleaning and protective coating techniques for the mosaic's glass tesserae; and post-treatment monitoring and maintenance.

Download or read book Additives for Coatings written by Johan Bieleman and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: No doubt: A perfect coating has to look brilliant! But other properties of coatings are also most important. Coatings have to be durable, tough and easily applicable. Additives are the key to success in achieving these characteristics, even though the amounts used in coating formulations are small. It is not trivial at all to select the best additives. In practice, many series of tests are often necessary, and the results do not explain, why a certain additive improves the quality of a coating and another one impairs the coating. This book is dedicated to developers and applicants of coatings working in research or production, and it is aimed at providing a manual for their daily work. It will answer the following questions: How do the most important groups of additives act? Which effects can be be achieved by their addition? Scientific theories are linked to practical applications. Emphasis is put on the optical aspects that are most important for the applications in practice. This book is a milestone in quality assurance in the complete field of coatings!

Download or read book The Glacier Theory written by James David Forbes and published by . This book was released on 1840 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Glossary of Periodontal Terms written by and published by . This book was released on 1992 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Manufacturing Processes written by H. N. Gupta and published by New Age International. This book was released on 2012-09 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective from 2008-09 session, U.P.T.U. has introduced the subject of manufacturing processes for first year engineering students of all streams. This textbook covers the entire course material in a distilled form.