Download or read book Fluid Flow Phenomena In Metals Processing written by Julian Szekely and published by Elsevier. This book was released on 2012-12-02 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid Flow Phenomena in Metals Processing outlines the fundamentals of fluid flow theory, emphasizing the potential applications of fluid flow concepts that are illustrated by actual problems drawn from the metallurgical literature. This book is divided into 10 chapters. Chapters 1 to 4 are devoted to the fundamentals of fluid flow, while Chapters 5 to 9 are concerned with the application of basic concepts to specific systems, such as electromagnetically driven flows, surface tension and natural convection driven flows, multiparticle systems, gas bubbles, and impinging jets. The discussion on flow measurements and introduction to physical modeling are provided in the last chapter. This publication is suitable for a one semester graduate level course for metallurgy and chemical engineering students.

Download or read book Rate Phenomena in Process Metallurgy written by Julian Szekely and published by New York : Wiley-Interscience. This book was released on 1971 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Transport Phenomena in Materials Processing written by David R. Poirier and published by Springer. This book was released on 2016-12-06 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides a teachable and readable approach to transport phenomena (momentum, heat, and mass transport) by providing numerous examples and applications, which are particularly important to metallurgical, ceramic, and materials engineers. Because the authors feel that it is important for students and practicing engineers to visualize the physical situations, they have attempted to lead the reader through the development and solution of the relevant differential equations by applying the familiar principles of conservation to numerous situations and by including many worked examples in each chapter. The book is organized in a manner characteristic of other texts in transport phenomena. Section I deals with the properties and mechanics of fluid motion; Section II with thermal properties and heat transfer; and Section III with diffusion and mass transfer. The authors depart from tradition by building on a presumed understanding of the relationships between the structure and properties of matter, particularly in the chapters devoted to the transport properties (viscosity, thermal conductivity, and the diffusion coefficients). In addition, generous portions of the text, numerous examples, and many problems at the ends of the chapters apply transport phenomena to materials processing.

Download or read book Transport Phenomena in Materials Processing written by E.J. Poirer and published by Springer. This book was released on 2017-08-18 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Mathematical and Physical Modeling of Primary Metals Processing Operations written by Julian Szekely and published by Wiley-Interscience. This book was released on 1988 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: A book that provides the mathematical and physical modelling techniques developed for representing metals processing operations such as extraction, refining and solidification. Often referred to as transport phenomena, these techniques are specific to primary metals and used for process optimization and process development now becoming essential as industry moves to on-line computer control of metal processing. This subject matter covers the components of models based on fluid flow; heat and mass transfer; obtaining measurements (data acquisition); optimization of the process; and numerical solutions. Covers the basic principles of numerical solution of differential equations, both finite differences and finite elements. Examples included.

Download or read book Basic Transport Phenomena in Materials Engineering written by Manabu Iguchi and published by Springer Science & Business Media. This book was released on 2013-09-12 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the basic theory and experimental techniques of transport phenomena in materials processing operations. Such fundamental knowledge is highly useful for researchers and engineers in the field to improve the efficiency of conventional processes or develop novel technology. Divided into four parts, the book comprises 11 chapters describing the principles of momentum transfer, heat transfer, and mass transfer in single phase and multiphase systems. Each chapter includes examples with solutions and exercises to facilitate students’ learning. Diagnostic problems are also provided at the end of each part to assess students’ comprehension of the material. The book is aimed primarily at students in materials science and engineering. However, it can also serve as a useful reference text in chemical engineering as well as an introductory transport phenomena text in mechanical engineering. In addition, researchers and engineers engaged in materials processing operations will find the material useful for the design of experiments and mathematical models in transport phenomena. This volume contains unique features not usually found in traditional transport phenomena texts. It integrates experimental techniques and theory, both of which are required to adequately solve the inherently complex problems in materials processing operations. It takes a holistic approach by considering both single and multiphase systems, augmented with specific practical examples. There is a discussion of flow and heat transfer in microscale systems, which is relevant to the design of modern processes such as fuel cells and compact heat exchangers. Also described are auxiliary relationships including turbulence modeling, interfacial phenomena, rheology, and particulate systems, which are critical to many materials processing operations.

Download or read book Foundry Processes written by Seymour Katz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a number of years it has been a General Motors Research Laboratories custom to hold a symposium on a subject which is new and emerging, and to invite the best people in the world in that subject to come together to talk to each other. Initially, I had some difficulty in regarding foundry processes as a new and emerging subject. Copper alloys have been in foundry practice for about six thousand years. Foundrymen working with those alloys have been recognized, as such, for nearly all that time. Iron has a much shorter history, probably only three or four thousand years. So what's new? What is new is that a subject which has always been so complex and so difficult that it could only be a craft skill, with bits and pieces of knowledge and bits and pieces of insight, has begun to yield to new abilities to solve very complex problems. We do this now because we can handle great amounts of data by computational means, using new and more complicated theoretical treatments than we could deal with before. In fact, we have a new technology with which we can attack these terribly difficult problems. Thus, foundry processing is becoming a new subject because new things can be done with it.

Download or read book EPD Congress 2016 written by Antoine Allanore and published by Springer. This book was released on 2016-12-15 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: EPD Congress is an annual collection that addresses extraction and processing metallurgy. The papers in this book are drawn from symposia held at the 2016 Annual Meeting of The Minerals, Metals & Materials Society. The 2016 edition includes papers from the following symposia: •Materials Processing Fundamentals •Advanced Characterization Techniques for Quantifying and Modeling Deformation

Download or read book Advances in Friction Stir Welding and Processing written by M.-K. Besharati-Givi and published by Elsevier. This book was released on 2014-12-08 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction-stir welding (FSW) is a solid-state joining process primarily used on aluminum, and is also widely used for joining dissimilar metals such as aluminum, magnesium, copper and ferrous alloys. Recently, a friction-stir processing (FSP) technique based on FSW has been used for microstructural modifications, the homogenized and refined microstructure along with the reduced porosity resulting in improved mechanical properties. Advances in friction-stir welding and processing deals with the processes involved in different metals and polymers, including their microstructural and mechanical properties, wear and corrosion behavior, heat flow, and simulation. The book is structured into ten chapters, covering applications of the technology; tool and welding design; material and heat flow; microstructural evolution; mechanical properties; corrosion behavior and wear properties. Later chapters cover mechanical alloying and FSP as a welding and casting repair technique; optimization and simulation of artificial neural networks; and FSW and FSP of polymers. Provides studies of the microstructural, mechanical, corrosion and wear properties of friction-stir welded and processed materials Considers heat generation, heat flow and material flow Covers simulation of FSW/FSP and use of artificial neural network in FSW/FSP

Download or read book Computational Fluid Dynamics with Moving Boundaries written by Wei Shyy and published by Courier Corporation. This book was released on 2012-08-21 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text describes several computational techniques that can be applied to a variety of problems in thermo-fluid physics, multi-phase flow, and applied mechanics involving moving flow boundaries. Step-by-step discussions of numerical procedures include multiple examples that employ algorithms in problem-solving. In addition to its survey of contemporary numerical techniques, this volume discusses formulation and computation strategies as well as applications in many fields. Researchers and professionals in aerospace, chemical, mechanical, and materials engineering will find it a valuable resource. It is also an appropriate textbook for advanced courses in fluid dynamics, computation fluid dynamics, heat transfer, and numerical methods.

Download or read book Treatise on Process Metallurgy Volume 2 Process Phenomena written by and published by Newnes. This book was released on 2013-11-22 with total page 889 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process metallurgy provides academics with the fundamentals of the manufacturing of metallic materials, from raw materials into finished parts or products. Coverage is divided into three volumes, entitled Process Fundamentals, encompassing process fundamentals, extractive and refining processes, and metallurgical process phenomena; Processing Phenomena, encompassing ferrous processing; non-ferrous processing; and refractory, reactive and aqueous processing of metals; and Industrial Processes, encompassing process modeling and computational tools, energy optimization, environmental aspects and industrial design. The work distils 400+ years combined academic experience from the principal editor and multidisciplinary 14-member editorial advisory board, providing the 2,608-page work with a seal of quality. The volumes will function as the process counterpart to Robert Cahn and Peter Haasen’s famous reference family, Physical Metallurgy (1996)--which excluded process metallurgy from consideration and which is currently undergoing a major revision under the editorship of David Laughlin and Kazuhiro Hono (publishing 2014). Nevertheless, process and extractive metallurgy are fields within their own right, and this work will be of interest to libraries supporting courses in the process area. Synthesizes the most pertinent contemporary developments within process metallurgy so scientists have authoritative information at their fingertips Replaces existing articles and monographs with a single complete solution, saving time for busy scientists Helps metallurgists to predict changes and consequences and create or modify whatever process is deployed

Download or read book Rapid Solidification Technology written by T.S. Sudarshan and published by CRC Press. This book was released on 1993-12-20 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid solidification processing results in increased strength, and fracture and fatigue resistance of alloys, with concurrent improvements in mechanical, physical and chemical properties. This volume provides a systematic examination of this technology, including metallurgical aspects, processing methods, alloy design, and applications. Each chapter was prepared by a specialist for this volume. The text is well illustrated with more than 400 micrographs and schematics. More than 75 tables provide important reference data.

Download or read book Modeling for Casting and Solidification Processing written by Kuang-Oscar Yu and published by CRC Press. This book was released on 2001-10-16 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text seeks to provide a comprehensive technical foundation and practical examples for casting process modelling technology. It highlights fundamental theory for solidification and useful applications for industrial production. It also details shape and ingot castings, semi-solid metalworking, and spray forming.

Download or read book Applied Computational Fluid Dynamics written by Vijay K. Garg and published by CRC Press. This book was released on 1998-05-08 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Describes the latest techniques and real-life applications of computational fluid dynamics (CFD) and heat transfer in aeronautics, materials processing and manufacturing, electronic cooling, and environmental control. Includes new material from experienced researchers in the field. Complete with detailed equations for fluid flow and heat transfer."

Download or read book Mathematical and Physical Modeling of Materials Processing Operations written by Olusegun Johnso Ilegbusi and published by CRC Press. This book was released on 1999-07-29 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past few decades have brought significant advances in the computational methods and in the experimental techniques used to study transport phenomena in materials processing operations. However, the advances have been made independently and with competition between the two approaches. Mathematical models are easier and less costly to implement, but experiments are essential for verifying theoretical models. In Mathematical and Physical Modeling of Materials Processing Operations, the authors bridge the gap between mathematical modelers and experimentalists. They combine mathematical and physical modeling principles for materials processing operations simulation and use numerous examples to compare theoretical and experimental results. The modeling of transport processes is multi-disciplinary, involving concepts and principles not all of which can be associated with just one field of study. Therefore, the authors have taken care to ensure that the text is self-sustaining through the variety and breadth of topics covered. Beyond the usual topics associated with transport phenomena, the authors also include detailed discussion of numerical methods and implementation of process models, software and hardware selection and application, and representation of auxiliary relationships, including turbulence modeling, chemical kinetics, magnetohydrodynamics, and multi-phase flow. They also provide several correlations for representing the boundary conditions of fluid flow, heat transfer, and mass transfer phenomena. Mathematical and Physical Modeling of Materials Processing Operations is ideal for introducing these tools to materials engineers and researchers. Although the book emphasizes materials, some of the topics will prove interesting and useful to researchers in other fields of chemical and mechanical engineering.

Download or read book Production and Electrolysis of Light Metals written by B. Closset and published by Elsevier. This book was released on 2013-10-22 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production and electrolysis of light metals - smelter operations, aluminum casting, aluminum melt treatment and control, electrolysis of light metals: magnesium and aluminum. Electrolysis of light metals: lithium, titanium and gallium. Reduction and production of light metals.

Download or read book Celebrating the Megascale written by Phillip Mackey and published by Springer. This book was released on 2016-12-02 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume contains more than 70 papers covering the important topics and issues in metallurgy today including papers as follows: keynote papers covering a tribute to David Robertson, workforce skills needed in the profession going forward, copper smelting, ladle metallurgy, process metallurgy and resource efficiency, new flash iron making technology, ferro-alloy electric furnace smelting and on the role of bubbles in metallurgical processing operations. Topics covered in detail in this volume include ferro-alloys, non-ferrous metallurgy, iron and steel, modeling, education, and fundamentals.