Download or read book Flow Based Optimization of Products or Devices written by Nils Tångefjord Basse and published by MDPI. This book was released on 2020-11-13 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flow-based optimization of products and devices is an immature field compared to the corresponding topology optimization based on solid mechanics. However, it is an essential part of component development with both internal and/or external flow. The aim of this book is two-fold: (i) to provide state-of-the-art examples of flow-based optimization and (ii) to present a review of topology optimization for fluid-based problems.

Download or read book Flow Based Optimization of Products Or Devices written by Nils Tångefjord Basse and published by . This book was released on 2020 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flow-based optimization of products and devices is an immature field compared to the corresponding topology optimization based on solid mechanics. However, it is an essential part of component development with both internal and/or external flow. The aim of this book is two-fold: (i) to provide state-of-the-art examples of flow-based optimization and (ii) to present a review of topology optimization for fluid-based problems.

Download or read book Hardware Software Co Design and Optimization for Cyberphysical Integration in Digital Microfluidic Biochips written by Yan Luo and published by Springer. This book was released on 2014-08-06 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a comprehensive framework for hardware/software co-design, optimization, and use of robust, low-cost, and cyberphysical digital microfluidic systems. Readers with a background in electronic design automation will find this book to be a valuable reference for leveraging conventional VLSI CAD techniques for emerging technologies, e.g., biochips or bioMEMS. Readers from the circuit/system design community will benefit from methods presented to extend design and testing techniques from microelectronics to mixed-technology microsystems. For readers from the microfluidics domain, this book presents a new design and development strategy for cyberphysical microfluidics-based biochips suitable for large-scale bioassay applications. • Takes a transformative, “cyberphysical” approach towards achieving closed-loop and sensor feedback-driven biochip operation under program control; • Presents a “physically-aware” system reconfiguration technique that uses sensor data at intermediate checkpoints to dynamically reconfigure biochips; • Enables readers to simplify the structure of biochips, while facilitating the “general-purpose” use of digital microfluidic biochips for a wider range of applications.

Download or read book Optimization of Trustworthy Biomolecular Quantitative Analysis Using Cyber Physical Microfluidic Platforms written by Mohamed Ibrahim and published by CRC Press. This book was released on 2020-05-31 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: A microfluidic biochip is an engineered fluidic device that controls the flow of analytes, thereby enabling a variety of useful applications. According to recent studies, the fields that are best set to benefit from the microfluidics technology, also known as lab-on-chip technology, include forensic identification, clinical chemistry, point-of-care (PoC) diagnostics, and drug discovery. The growth in such fields has significantly amplified the impact of microfluidics technology, whose market value is forecast to grow from $4 billion in 2017 to $13.2 billion by 2023. The rapid evolution of lab-on-chip technologies opens up opportunities for new biological or chemical science areas that can be directly facilitated by sensor-based microfluidics control. For example, the digital microfluidics-based ePlex system from GenMarkDx enables automated disease diagnosis and can bring syndromic testing near patients everywhere. However, as the applications of molecular biology grow, the adoption of microfluidics in many applications has not grown at the same pace, despite the concerted effort of microfluidic systems engineers. Recent studies suggest that state-of-the-art design techniques for microfluidics have two major drawbacks that need to be addressed appropriately: (1) current lab-on-chip systems were only optimized as auxiliary components and are only suitable for sample-limited analyses; therefore, their capabilities may not cope with the requirements of contemporary molecular biology applications; (2) the integrity of these automated lab-on-chip systems and their biochemical operations are still an open question since no protection schemes were developed against adversarial contamination or result-manipulation attacks. Optimization of Trustworthy Biomolecular Quantitative Analysis Using Cyber-Physical Microfluidic Platforms provides solutions to these challenges by introducing a new design flow based on the realistic modeling of contemporary molecular biology protocols. It also presents a microfluidic security flow that provides a high-level of confidence in the integrity of such protocols. In summary, this book creates a new research field as it bridges the technical skills gap between microfluidic systems and molecular biology protocols but it is viewed from the perspective of an electronic/systems engineer.

Download or read book Manufacturing Engineering Principles For Optimization written by Daniel T. Koenig and published by CRC Press. This book was released on 1994-08-01 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers instruction in manufacturing engineering management strategies to help the student optimize future manufacturing processes and procedures. This edition includes innovations that have changed management's approach toward the uses of manufacturing engineering within the business continuum.

Download or read book Exergy Energy System Analysis and Optimization Volume II written by Christos A. Frangopoulos and published by EOLSS Publications. This book was released on 2009-05-13 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exergy, Energy System Analysis, and Optimization theme is a component of the Encyclopedia of Energy Sciences, Engineering and Technology Resources which is part of the global Encyclopedia of Life Support Systems (EOLSS), an integrated compendium of twenty one Encyclopedias. These three volumes are organized into five different topics which represent the main scientific areas of the theme: 1. Exergy and Thermodynamic Analysis; 2. Thermoeconomic Analysis; 3. Modeling, Simulation and Optimization in Energy Systems; 4. Artificial Intelligence and Expert Systems in Energy Systems Analysis; 5. Sustainability Considerations in the Modeling of Energy Systems. Fundamentals and applications of characteristic methods are presented in these volumes. These three volumes are aimed at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.

Download or read book Petroleum Refining Design and Applications Handbook Volume 5 written by A. Kayode Coker and published by John Wiley & Sons. This book was released on 2023-06-22 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt: PETROLEUM REFINING With no new refineries having been built in decades, companies continue to build onto or reverse engineer and re-tool existing refineries. With so many changes in the last few years alone, books like this are very much in need. There is truly a renaissance for chemical and process engineering going on right now across multiple industries. This fifth and final volume in the “Petroleum Refining Design and Applications Handbook” set, this book continues the most up-to-date and comprehensive coverage of the most significant and recent changes to petroleum refining, presenting the state-of-the-art to the engineer, scientist, or student. Besides the list below, this groundbreaking new volume describes blending of products from the refinery, applying the ternary diagrams and classifications of crude oils, flash point blending, pour point blending, aniline point blending, smoke point and viscosity blending, cetane and diesel indices. The volume further reviews refinery operational cost, cost allocation of actual usage, project and economic evaluation involving cost estimation, cash flow involving return on investment, net present values, discounted cash flow rate of return, net present values, payback period, inflation and sensitivity analysis, and so on. It reviews global effects on the refining economy, carbon tax, carbon foot print, global warming potential, carbon dioxide equivalent, carbon credit, carbon offset, carbon price, and so on. It reviews sustainability in petroleum refining and alternative fuels (biofuels and so on), impact of the overall greenhouse effects, carbon capture and storage in refineries, process intensification in biodiesel, biofuel from green diesel, acid-gas removal and emerging technologies, carbon capture and storage, gas heated reformer unit, pressure swing adsorption process, steam methane reforming for fuel cells, grey, blue and green hydrogen production, new technologies for carbon capture and storage, carbon clean process design, refinery of the future, refining and petrochemical industry characteristics. The text is packed with Excel spreadsheet calculations and Honeywell UniSim Design software in some examples, and it includes an invaluable glossary of petroleum and petrochemical technical terminologies. Useful as a textbook, this is also an excellent, handy go-to reference for the veteran engineer, a volume no chemical or process engineering library should be without. Written by one of the world’s foremost authorities, this book sets the standard for the industry and is an integral part of the petroleum refining renaissance. It is truly a must-have for any practicing engineer or student in this area.

Download or read book Computer Supported Cooperative Work and Social Computing written by Yuqing Sun and published by Springer Nature. This book was released on 2019-11-13 with total page 791 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 14th CCF Conference on Computer Supported Cooperative Work and Social Computing, ChineseCSCW 2019, held in Kunming, China, in August 2019. The 52 revised full papers and 10 short papers were carefully reviewed and selected from 169 submissions. The papers of this volume are organized in topical sections on: collaborative models, approaches, algorithms, and systems; social computing (online communities, crowdsourcing, recommendation, sentiment analysis, etc.); AI for CSCW and social computing.

Download or read book Simulation Methods for ESD Protection Development written by Harald Gossner and published by Elsevier. This book was released on 2003-10-16 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulation Methods for ESD Protection Development looks at the integration of new techniques into a comprehensive development flow, which is now available due advances made in the field during the recent years. These findings allow for an early, stable ESD concept at a very early stage of the technology development, which is essential now development cycles have been reduced. The book also offers ways of increasing the optimization and control of the technology concerning performance, thus making the process more cost effective and increasingly efficient. This title provides a guide through the latest research and technology presenting the ESD protection development methodology. This is based on a combination of process, device and circuit stimulation, and addresses the optimization of the industry critical issue, reduced development cycles.Written to address the needs of the ESD engineer, this text is required reading by all industry practitioners and researchers and students within this field. The FIRST Extensive overview on the subject of ESD simulation Addresses the industry critical issue of reduced development cycles, and provides solutions Presents the latest research in the field with high practical relevance and its results

Download or read book Advances in Condition Monitoring Optimization and Control for Complex Industrial Processes written by Zhiwei Gao and published by MDPI. This book was released on 2021-09-01 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book documents 25 papers collected from the Special Issue “Advances in Condition Monitoring, Optimization and Control for Complex Industrial Processes”, highlighting recent research trends in complex industrial processes. The book aims to stimulate the research field and be of benefit to readers from both academic institutes and industrial sectors.

Download or read book Manufacturing Science and Technology ICMST2011 written by Wu Fan and published by Trans Tech Publications Ltd. This book was released on 2011-11-22 with total page 8340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). The objective of ICMST 2011 was to provide a platform where researchers, engineers, academics and industrial professionals from all over the world could present their research results and discuss developments in Manufacturing Science and Technology. This conference provided opportunities for delegates to exchange new ideas and applications face-to-face, to establish business or research contacts and to find global partners for future collaboration.

Download or read book Model Based Optimization for Petroleum Refinery Configuration Design written by Cheng Seong Khor and published by John Wiley & Sons. This book was released on 2024-03-25 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: An accessible, easy-to-read introduction to the methods of mixed-integer optimization, with practical applications, real-world operational data, and case studies Interest in model-based approaches for optimizing the design of petroleum refineries has increased throughout the industry in recent years. Mathematical optimization based on mixed-integer programming has brought about the superstructure optimization method for synthesizing petroleum refinery configurations from multiple topological alternatives. Model-Based Optimization for Petroleum Refinery Configuration Design presents a detailed introduction to the use of mathematical optimization to solve both linear and nonlinear problems in the refining industry. The book opens with an overview of petroleum refining processes, basic concepts in mathematical programming, and applications of mathematical programming for refinery optimization. Subsequent chapters address superstructure representations of topological alternatives, mathematical formulation, solution strategies, and various modeling frameworks. Practical case studies demonstrate refinery configuration design, refinery retrofitting, and real-world issues and considerations. Presents linear, nonlinear, and mixed-integer programming approaches applicable to both new and existing petroleum refineries Highlights the benefits of model-based solutions to refinery configuration design problems Features detailed case studies of the development and implementation of optimization models Discusses economic considerations of heavy oil processing, including cash flow analysis of refinery costs and return on capital Includes numerical examples based on real-world operational data and various commercial technologies Model-Based Optimization for Petroleum Refinery Configuration Design is an invaluable resource for researchers, chemical engineers, process and energy engineers, other refining professionals, and advanced chemical engineering students.

Download or read book Computational Intelligence and Optimization Methods for Control Engineering written by Maude Josée Blondin and published by Springer Nature. This book was released on 2019-09-20 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents some recent and principal developments related to computational intelligence and optimization methods in control. Theoretical aspects and practical applications of control engineering are covered by 14 self-contained contributions. Additional gems include the discussion of future directions and research perspectives designed to add to the reader’s understanding of both the challenges faced in control engineering and the insights into the developing of new techniques. With the knowledge obtained, readers are encouraged to determine the appropriate control method for specific applications.

Download or read book Energy Efficiency in Process Technology written by P.A. Pilavachi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since 1975 the Commission has been stimulating R & D work aimed at energy saving. The conference objective was to provide an international forum for the presentation and discussion of recent R & D relevant to energy efficiency, taking into account environmental aspects, in the energy intensive process industries.

Download or read book Quantitative Analysis and Optimal Control of Energy Efficiency in Discrete Manufacturing System written by Yan Wang and published by Springer Nature. This book was released on 2020-06-01 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides energy efficiency quantitative analysis and optimal methods for discrete manufacturing systems from the perspective of global optimization. In order to analyze and optimize energy efficiency for discrete manufacturing systems, it uses real-time access to energy consumption information and models of the energy consumption, and constructs an energy efficiency quantitative index system. Based on the rough set and analytic hierarchy process, it also proposes a principal component quantitative analysis and a combined energy efficiency quantitative analysis. In turn, the book addresses the design and development of quantitative analysis systems. To save energy consumption on the basis of energy efficiency analysis, it presents several optimal control strategies, including one for single-machine equipment, an integrated approach based on RWA-MOPSO, and one for production energy efficiency based on a teaching and learning optimal algorithm. Given its scope, the book offers a valuable guide for students, teachers, engineers and researchers in the field of discrete manufacturing systems.

Download or read book Handbook of Research on Modern Optimization Algorithms and Applications in Engineering and Economics written by Vasant, Pandian and published by IGI Global. This book was released on 2016-03-08 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern optimization approaches have attracted many research scientists, decision makers and practicing researchers in recent years as powerful intelligent computational techniques for solving several complex real-world problems. The Handbook of Research on Modern Optimization Algorithms and Applications in Engineering and Economics highlights the latest research innovations and applications of algorithms designed for optimization applications within the fields of engineering, IT, and economics. Focusing on a variety of methods and systems as well as practical examples, this book is a significant resource for graduate-level students, decision makers, and researchers in both public and private sectors who are seeking research-based methods for modeling uncertain real-world problems. .

Download or read book Digital Manufacturing Automation III written by Yong Hong Tan and published by Trans Tech Publications Ltd. This book was released on 2012-07-26 with total page 1550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). Digital manufacturing and automation technology plays a more and more important role in advancing industry. These peer-reviewed papers report up-to-the-minute innovations and developments, and summarize state-of-the-art ideas for the benefit of domestic and foreign scholars and experts from areas such as mechatronics, digital manufacturing, deep-sea mining control technology and equipment automation, intelligent control and detection technology.