Download or read book Flexible AC Transmission Systems Modelling and Control written by Xiao-Ping Zhang and published by Springer Science & Business Media. This book was released on 2012-02-24 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: The extended and revised second edition of this successful monograph presents advanced modeling, analysis and control techniques of Flexible AC Transmission Systems (FACTS). The book covers comprehensively a range of power-system control problems: from steady-state voltage and power flow control, to voltage and reactive power control, to voltage stability control, to small signal stability control using FACTS controllers. In the six years since the first edition of the book has been published research on the FACTS has continued to flourish while renewable energy has developed into a mature and booming global green business. The second edition reflects the new developments in converter configuration, smart grid technologies, super power grid developments worldwide, new approaches for FACTS control design, new controllers for distribution system control, and power electronic controllers in wind generation operation and control. The latest trends of VSC-HVDC with multilevel architecture have been included and four completely new chapters have been added devoted to Multi-Agent Systems for Coordinated Control of FACTS-devices, Power System Stability Control using FACTS with Multiple Operating Points, Control of a Looping Device in a Distribution System, and Power Electronic Control for Wind Generation.
Download or read book Flexible AC Transmission Systems Modelling and Control written by Xiao-Ping Zhang and published by Springer Science & Business Media. This book was released on 2006-03-28 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents advanced modelling, analysis and control techniques of FACTS. These topics reflect the recent research and development of FACTS controllers, and anticipate the future applications of FACTS in power systems. The book covers comprehensively a range of power-system control problems: from steady-state voltage and power flow control, to voltage and reactive power control, to voltage stability control, to small signal stability control using FACTS controllers. The book presents the modelling of the latest FACTS controllers for power flow control, compensation and power quality (IPFC, GUPF, VSC HVDC and M-VSCHVDC, etc.) in power system analysis. The selection is evaluated by the actual and likely future practical relevance of each. The material is derived mainly from the research and industrial development in which the authors have been heavily involved. The book is timely and of great value to power engineering engineers and students of modelling, simulations and control design of FACTS for a broad practical range of power system operation, planning and control problems.
Download or read book Flexible Ac Transmission Systems FACTS written by Yong-Hua Song and published by IET. This book was released on 1999 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive guide to FACTS, covering all the major aspects in research and development of FACTS technology.
Download or read book Flexible AC Transmission Systems FACTS written by Suman Bhowmick and published by CRC Press. This book was released on 2018-09-03 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexible AC Transmission Systems (FACTS): Newton Power-Flow Modeling of Voltage-Sourced Converter-Based Controllers introduces different voltage-sourced converter (VSC)-based FACTS controllers and VSC-based high-voltage direct current (VSC-HVDC) systems and their working principles, explaining how FACTS controllers exchange real and reactive power with systems. Subsequently, the book: Describes the Newton–Raphson method and its application for solving the power-flow problem Presents the Newton power-flow modeling of the static synchronous series compensator (SSSC), unified power-flow controller (UPFC), interline power-flow controller (IPFC), generalized unified power-flow controller (GUPFC), and static synchronous compensator (STATCOM), accommodating the practical device constraint limits (because of the unique modeling strategy, the existing Newton power-flow codes can be reused) Develops a unified Newton power-flow model of AC systems incorporating multiterminal VSC-HVDC systems with pulse-width modulation (PWM) control schemes, directly yielding the VSC modulation indices from the power-flow solution Provides numerous case studies for validation of Newton power-flow models, elaborating on the occurrences and checking of unrealistic power-flow solutions in isolated cases Includes detailed derivations of all the difficult formulae as well as solved problems on typical VSC-based FACTS controllers Flexible AC Transmission Systems (FACTS): Newton Power-Flow Modeling of Voltage-Sourced Converter-Based Controllers assumes at least an undergraduate-level understanding of engineering mathematics, network analysis, electrical machines, electrical power systems, and power electronics. Thus, the book provides a valuable reference for practitioners as well as senior-undergraduate and graduate students in electrical engineering and electrical power systems.
Download or read book Understanding FACTS written by Narain G. Hingorani and published by Wiley-IEEE Press. This book was released on 2000 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Flexible AC Transmission System (FACTS)--a new technology based on power electronics--offers an opportunity to enhance controllability, stability, and power transfer capability of ac transmission systems. Two pioneers in the field provide in-depth discussions on power semiconductor devices, voltage-sourced and current-sourced converters, specific FACTS controllers, and major FACTS applications in the U.S.
Download or read book Power System Modeling Computation and Control written by Joe H. Chow and published by John Wiley & Sons. This book was released on 2020-01-21 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides students with an understanding of the modeling and practice in power system stability analysis and control design, as well as the computational tools used by commercial vendors Bringing together wind, FACTS, HVDC, and several other modern elements, this book gives readers everything they need to know about power systems. It makes learning complex power system concepts, models, and dynamics simpler and more efficient while providing modern viewpoints of power system analysis. Power System Modeling, Computation, and Control provides students with a new and detailed analysis of voltage stability; a simple example illustrating the BCU method of transient stability analysis; and one of only a few derivations of the transient synchronous machine model. It offers a discussion on reactive power consumption of induction motors during start-up to illustrate the low-voltage phenomenon observed in urban load centers. Damping controller designs using power system stabilizer, HVDC systems, static var compensator, and thyristor-controlled series compensation are also examined. In addition, there are chapters covering flexible AC transmission Systems (FACTS)—including both thyristor and voltage-sourced converter technology—and wind turbine generation and modeling. Simplifies the learning of complex power system concepts, models, and dynamics Provides chapters on power flow solution, voltage stability, simulation methods, transient stability, small signal stability, synchronous machine models (steady-state and dynamic models), excitation systems, and power system stabilizer design Includes advanced analysis of voltage stability, voltage recovery during motor starts, FACTS and their operation, damping control design using various control equipment, wind turbine models, and control Contains numerous examples, tables, figures of block diagrams, MATLAB plots, and problems involving real systems Written by experienced educators whose previous books and papers are used extensively by the international scientific community Power System Modeling, Computation, and Control is an ideal textbook for graduate students of the subject, as well as for power system engineers and control design professionals.
Download or read book Thyristor Based FACTS Controllers for Electrical Transmission Systems written by R. Mohan Mathur and published by John Wiley & Sons. This book was released on 2002-02-27 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theoretische Grundlagen und praktische Details werden in diesem Band gleichermaßen tiefgründig abgehandelt. Beispiele und Fallstudien zum Entwurf von Steuerungen und zur Messung der Leistungsfähigkeit runden den Text ab.
Download or read book Modelling Flexible AC Transmission Systems FACTS Devices on Weak Transmission Lines in the Nigerian Power Network written by Olalekan Olagunju and published by GRIN Verlag. This book was released on 2020-02-26 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research Paper (postgraduate) from the year 2019 in the subject Electrotechnology, , language: English, abstract: The aim of the study is to model FACTS devices on weak transmission line in the Nigeria power network and consider their effect on the bus voltages, reactive and active power using genetic algorithm(GA) approach for loss minimization. The Nigeria 330KV existing network to be considered consist of nine (9) generating stations, thirty(30)Buses and forty one (41) transmission lines which will be modelled and simulated using Matlab Version 7.10. The study is limited to Nigeria 330kV existing power network with the focus on the comparison of the Bus voltages and power flow on the transmission lines when FACTS devices are incorporated and when the FACTS devices are not incorporated. Research Questions: For the realization of the objectives mentioned above and the aim, the following research questions were set as a guide: 1. What is the significant effect of FACTS devices on weak transmission lines? 2. Can FACTS device be used with genetic algorithm for optimization of power loss and improvement of the bus voltages? 3. What is the limitation of using just genetic algorithm without FACTS device for the optimization of power loss and the improvement of the bus voltages? This research work is divided into five chapters with each chapter buttressing more on minimization of power loss. The scope of the work , the objective and aim of the research work to be achieved is addressed in chapter one (1). Chapter two(2) focus on the literature review of other researchers on FACTS device in the improvement of the power network, the concept of FACTS device and the choice of FACTS device to be used was also addressed in chapter two (2) of this research work. Chapter three focus on the methodology used for this study. The simulation of the 330kV Nigeria power network was done on MATLAB /SIMULINK 7.5. Also the chapter three focused on the use of power flow analysis toolbox which is a collection of a written codes of m files that has a compatible interface with MATLAB to generate the load flow of the power network instead of using ETAP. The genetic algorithm was also discussed as an optimization tool deployed to optimize the losses on the transmission line. Chapter four focus on the research findings with possible explanation as to some of the result obtained. Finally chapter five talks about the conclusion of this research work and highlight some areas to explore in the future.
Download or read book FACTS Controllers written by K. R PADIYAR and published by . This book was released on 2020-10 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Key Features:Concepts are explained with illustrative examples and case studies. Applications of SVC, TCSC, GCSC, SPST, STATCOM, SSSC, UPFC, IPFC and IPC for voltage/power control in transmission systems. Application of DSTATCOM, DVR and UPQC for improving power quality in distribution systems. Design of Power Oscillation Damping (POD) controllers. Mitigation of SSR using series FACTS Controllers. About the Book:The emerging technology of Flexible AC Transmission System (FACTS) enables planning and operation of power systems at minimum cost, without compromising security. This is based on modern high power electronic systems that provide fast controllability to ensure 'flexible' operation under changing system conditions. This book presents a comprehensive treatment of the subject by discussing the operating principles, mathematical models, control design and issues that affect the applications.
Download or read book Robust Control in Power Systems written by Bikash Pal and published by Springer Science & Business Media. This book was released on 2006-07-02 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robust Control in Power Systems deals with the applications of new techniques in linear system theory to control low frequency oscillations in power systems. The book specifically focuses on the analysis and damping of inter-area oscillations in the systems which are in the range of 0.2-1 Hz. The damping control action is injected through high power electronic devices known as flexible AC transmission system (FACTS) controllers. Three commonly used FACTS controllers: controllable series capacitors (CSCs) controllable phase shifters (CPSs) and static var compensators (SVCs) have been used in this book to control the inter-area oscillations. The overview of linear system theory from the perspective of power system control is explained through examples. The damping control design is formulated as norm optimization problem. The H_infinity, H2 norm of properly defined transfer functions are minimized in linear matrix inequalities (LMI) framework to obtain desired performance and stability robustness. Both centralized and decentralized control structures are used. Usually the transmission of feedback signal from a remote location encounters delays making it difficult to control the system. Smith predictor based approach has been successfully explored in this book as a solution to such a problem. Robust Control in Power Systems will be valuable to academicians in the areas of power, control and system theory, as well as professionals in the power industry.
Download or read book An Introduction to Modelling of Power System Components written by S Krishna and published by Springer Science & Business Media. This book was released on 2014-04-02 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: The brief provides a quick introduction to the dynamic modelling of power system components. It gives a rigorous derivation of the model of different components of the power system such as synchronous generator, transformer, transmission line, FACTS, DC transmission system, excitation system and speed governor. Models of load and prime movers are also discussed. The brief can be used as a reference for researchers working in the areas of power system dynamics, stability analysis and design of stability controllers. It can also serve as a text for a short course on power system modelling, or as a supplement for a senior undergraduate/graduate course on power system stability.
Download or read book Advanced Solutions in Power Systems written by Mircea Eremia and published by John Wiley & Sons. This book was released on 2016-09-27 with total page 1072 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides insight on both classical means and new trends in the application of power electronic and artificial intelligence techniques in power system operation and control This book presents advanced solutions for power system controllability improvement, transmission capability enhancement and operation planning. The book is organized into three parts. The first part describes the CSC-HVDC and VSC-HVDC technologies, the second part presents the FACTS devices, and the third part refers to the artificial intelligence techniques. All technologies and tools approached in this book are essential for power system development to comply with the smart grid requirements. Discusses detailed operating principles and diagrams, theory of modeling, control strategies and physical installations around the world of HVDC and FACTS systems Covers a wide range of Artificial Intelligence techniques that are successfully applied for many power system problems, from planning and monitoring to operation and control Each chapter is carefully edited, with drawings and illustrations that helps the reader to easily understand the principles of operation or application Advanced Solutions in Power Systems: HVDC, FACTS, and Artificial Intelligence is written for graduate students, researchers in transmission and distribution networks, and power system operation. This book also serves as a reference for professional software developers and practicing engineers.
Download or read book Modeling and Control of Sustainable Power Systems written by Lingfeng Wang and published by Springer Science & Business Media. This book was released on 2011-11-09 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concept of the smart grid promises the world an efficient and intelligent approach of managing energy production, transportation, and consumption by incorporating intelligence, efficiency, and optimality into the power grid. Both energy providers and consumers can take advantage of the convenience, reliability, and energy savings achieved by real-time and intelligent energy management. To this end, the current power grid is experiencing drastic changes and upgrades. For instance, more significant green energy resources such as wind power and solar power are being integrated into the power grid, and higher energy storage capacity is being installed in order to mitigate the intermittency issues brought about by the variable energy resources. At the same time, novel power electronics technologies and operating strategies are being invented and adopted. For instance, Flexible AC transmission systems and phasor measurement units are two promising technologies for improving the power system reliability and power quality. Demand side management will enable the customers to manage the power loads in an active fashion. As a result, modeling and control of modern power grids pose great challenges due to the adoption of new smart grid technologies. In this book, chapters regarding representative applications of smart grid technologies written by world-renowned experts are included, which explain in detail various innovative modeling and control methods.
Download or read book FACTS written by Enrique Acha and published by John Wiley & Sons. This book was released on 2004-10-22 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book to provide comprehensive coverage of FACTS power systems modeling and simulation. * Detailed coverage of the development of FACTS controllers and guidance on the selection of appropriate equipment * Computer modelling examples of the FACTS controllers for steady-state and transient stability systems * Numerous case studies and practical examples
Download or read book Simulation of Power System with Renewables written by Linash Kunjumuhammed and published by Academic Press. This book was released on 2019-10-02 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulation of Power System with Renewables provides details on the modelling and efficient implementation of MATLAB, particularly with a renewable energy driven power system. The book presents a step-by-step approach to modelling implementation, including all major components used in current power systems operation, giving the reader the opportunity to learn how to gather models for conventional generators, wind farms, solar plants and FACTS control devices. Users will find this to be a central resource for modelling, building and simulating renewable power systems, including discussions on its limitations, assumptions on the model, and the implementation and analysis of the system. Presents worked examples and equations in each chapter that address system limitations and flexibility Provides step-by-step guidance for building and simulating models with required data Contains case studies on a number of devices, including FACTS, and renewable generation
Download or read book Power Electronic Converters Modeling and Control written by Seddik Bacha and published by Springer Science & Business Media. This book was released on 2013-11-12 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern power electronic converters are involved in a very broad spectrum of applications: switched-mode power supplies, electrical-machine-motion-control, active power filters, distributed power generation, flexible AC transmission systems, renewable energy conversion systems and vehicular technology, among them. Power Electronics Converters Modeling and Control teaches the reader how to analyze and model the behavior of converters and so to improve their design and control. Dealing with a set of confirmed algorithms specifically developed for use with power converters, this text is in two parts: models and control methods. The first is a detailed exposition of the most usual power converter models: · switched and averaged models; · small/large-signal models; and · time/frequency models. The second focuses on three groups of control methods: · linear control approaches normally associated with power converters; · resonant controllers because of their significance in grid-connected applications; and · nonlinear control methods including feedback linearization, stabilizing, passivity-based, and variable-structure control. Extensive case-study illustration and end-of-chapter exercises reinforce the study material. Power Electronics Converters Modeling and Control addresses the needs of graduate students interested in power electronics, providing a balanced understanding of theoretical ideas coupled with pragmatic tools based on control engineering practice in the field. Academics teaching power electronics will find this an attractive course text and the practical points make the book useful for self tuition by engineers and other practitioners wishing to bring their knowledge up to date.
Download or read book Reactive Power Control in AC Power Systems written by Naser Mahdavi Tabatabaei and published by Springer. This book was released on 2017-04-05 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook explores reactive power control and voltage stability and explains how they relate to different forms of power generation and transmission. Bringing together international experts in this field, it includes chapters on electric power analysis, design and operational strategies. The book explains fundamental concepts before moving on to report on the latest theoretical findings in reactive power control, including case studies and advice on practical implementation students can use to design their own research projects. Featuring numerous worked-out examples, problems and solutions, as well as over 400 illustrations, Reactive Power Control in AC Power Systems offers an essential textbook for postgraduate students in electrical power engineering. It offers practical advice on implementing the methods discussed in the book using MATLAB and DIgSILENT, and the relevant program files are available at extras.springer.com.
