Download or read book Sliding Mode Control of Switching Power Converters written by Siew-Chong Tan and published by CRC Press. This book was released on 2018-09-03 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sliding Mode Control of Switching Power Converters: Techniques and Implementation is perhaps the first in-depth account of how sliding mode controllers can be practically engineered to optimize control of power converters. A complete understanding of this process is timely and necessary, as the electronics industry moves toward the use of renewable energy sources and widely varying loads that can be adequately supported only by power converters using nonlinear controllers. Of the various advanced control methods used to handle the complex requirements of power conversion systems, sliding mode control (SMC) has been most widely investigated and proved to be a more feasible alternative than fuzzy and adaptive control for existing and future power converters. Bridging the gap between power electronics and control theory, this book employs a top-down instructional approach to discuss traditional and modern SMC techniques. Covering everything from equations to analog implantation, it: Provides a comprehensive general overview of SMC principles and methods Offers advanced readers a systematic exposition of the mathematical machineries and design principles relevant to construction of SMC, then introduces newer approaches Demonstrates the practical implementation and supporting design rules of SMC, based on analog circuits Promotes an appreciation of general nonlinear control by presenting it from a practical perspective and using familiar engineering terminology With specialized coverage of modeling and implementation that is useful to students and professionals in electrical and electronic engineering, this book clarifies SMC principles and their application to power converters. Making the material equally accessible to all readers, whether their background is in analog circuit design, power electronics, or control engineering, the authors—experienced researchers in their own right—elegantly and practically relate theory, application, and mathematical concepts and models to corresponding industrial targets.

Download or read book Design and Control of Power Converters 2019 written by Manuel Arias and published by MDPI. This book was released on 2021-07-02 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, 20 papers focused on different fields of power electronics are gathered. Approximately half of the papers are focused on different control issues and techniques, ranging from the computer-aided design of digital compensators to more specific approaches such as fuzzy or sliding control techniques. The rest of the papers are focused on the design of novel topologies. The fields in which these controls and topologies are applied are varied: MMCs, photovoltaic systems, supercapacitors and traction systems, LEDs, wireless power transfer, etc.

Download or read book Advanced Control of Power Converters written by Hasan Komurcugil and published by John Wiley & Sons. This book was released on 2023-07-11 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Control of Power Converters Unique resource presenting advanced nonlinear control methods for power converters, plus simulation, controller design, analyses, and case studies Advanced Control of Power Converters equips readers with the latest knowledge of three control methods developed for power converters: nonlinear control methods such as sliding mode control, Lyapunov-function-based control, and model predictive control. Readers will learn about the design of each control method, and simulation case studies and results will be presented and discussed to point out the behavior of each control method in different applications. In this way, readers wishing to learn these control methods can gain insight on how to design and simulate each control method easily. The book is organized into three clear sections: introduction of classical and advanced control methods, design of advanced control methods, and case studies. Each control method is supported by simulation examples along with Simulink models which are provided on a separate website. Contributed to by five highly qualified authors, Advanced Control of Power Converters covers sample topics such as: Mathematical modeling of single- and three-phase grid-connected inverter with LCL filter, three-phase dynamic voltage restorer, design of sliding mode control and switching frequency computation under single- and double-band hysteresis modulations Modeling of single-phase UPS inverter and three-phase rectifier and their Lyapunov-function-based control design for global stability assurance Design of model predictive control for single-phase T-type rectifier, three-phase shunt active power filter, three-phase quasi-Z-source inverter, three-phase rectifier, distributed generation inverters in islanded ac microgrids How to realize the Simulink models in sliding mode control, Lyapunov-function-based control and model predictive control How to build and run a real-time model as well as rapid prototyping of power converter by using OPAL-RT simulator Advanced Control of Power Converters is an ideal resource on the subject for researchers, engineering professionals, and undergraduate/graduate students in electrical engineering and mechatronics; as an advanced level book, and it is expected that readers will have prior knowledge of power converters and control systems.

Download or read book Sliding Mode Control of Power Converters in Renewable Energy Systems written by Luis Martinez-Salamero and published by . This book was released on 2020-06-24 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Renewable energies are becoming a must to counteract the consequences of the global warming. More efficient devices and better control strategies are required in the generation, transport, and conversion of electricity. Energy is processed by power converters that are currently the key building blocks in modern power distribution systems. The associated electrical architecture is based on buses for energy distribution and uses a great number of converters for interfacing both input and output energy. This book shows that sliding-mode control is contributing to improve the performances of power converters by means of accurate theoretical analyses that result in efficient implementations. The sliding-mode control of power converters for renewable energy applications offers a panoramic view of the most recent uses of this regulation technique in practical cases. By presenting examples that range from dozens of kilowatts to only a few watts, the book covers control solutions for AC-DC and DC-AC generation, power factor correction, multilevel converters, constant-power load supply, wind energy systems, efficient lighting, digital control implementation, multiphase converters, and energy harvesting. The selected examples developed by recognized specialists are illustrated by means of detailed simulations and experiments to help the reader to understand the theoretical approach in each case considered in the book.

Download or read book Control Circuits in Power Electronics written by Miguel Castilla and published by IET. This book was released on 2016-05-16 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control circuits are a key element in the operation and performance of power electronics converters. This book describes practical issues related to the design and implementation of these control circuits, and is divided into three parts - analogue control circuits, digital control circuits, and new trends in control circuits.

Download or read book Control of Power Electronic Converters with Microgrid Applications written by Arindam Ghosh and published by John Wiley & Sons. This book was released on 2022-09-16 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Power Electronic Converters with Microgrid Applications Discover a systematic approach to design controllers for power electronic converters and circuits In Control of Power Electronic Converters with Microgrid Applications, distinguished academics and authors Drs. Arindam Ghosh and Firuz Zare deliver a systematic exploration of design controllers for power electronic converters and circuits. The book offers readers the knowledge necessary to effectively design intelligent control mechanisms. It covers the theoretical requirements, like advanced control theories and the analysis and conditioning of AC signals as well as controller development and control. The authors provide readers with discussions of custom power devices, as well as both DC and AC microgrids. They also discuss the harmonic issues that are crucial in this area, as well as harmonic standardization. The book addresses a widespread lack of understanding in the control philosophy that can lead to a stable operation of converters, with a focus on the application of power electronics to power distribution systems. Readers will also benefit from the inclusion of: A thorough introduction to controller design for different power electronic converter configurations in microgrid systems (both AC and DC) A presentation of emerging technology in power distribution systems to integrate different renewable energy sources Chapters on DC-DC converters and DC microgrids, as well as DC-AC converter modulation techniques and custom power devices, predictive control, and AC microgrids Perfect for manufacturers of power converters, microgrid developers and installers, as well as consultants who work in this area, Control of Power Electronic Converters with Microgrid Applications is also an indispensable reference for graduate students, senior undergraduate students, and researchers seeking a one-stop resource for the design of controllers for power electronic converters and circuits.

Download or read book Control of Power Electronic Converters and Systems written by Frede Blaabjerg and published by Academic Press. This book was released on 2021-04-01 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Power Electronic Converters and Systems, Volume 3, explores emerging topics in the control of power electronics and converters, including the theory behind control, and the practical operation, modeling, and control of basic power system models. This book introduces the most important controller design methods, including both analog and digital procedures. This reference explains the dynamic characterization of terminal behavior for converters, as well as preserving the stability and power quality of modern power systems. Useful for engineers in emerging applications of power electronic converters and those combining control design methods into different applications in power electronics technology. Addressing controller interactions - in light of increasing renewable energy integration and related challenges with stability and power quality - is becoming more frequent in power converters and passive components. - Discusses different applications and their control in integrated renewable energy systems - Introduces the most important controller design methods, both in analog and digital - Describes different important applications to be used in future industrial products - Explains the dynamic characterization of terminal behavior for converters

Download or read book Sliding Mode Control in Electro Mechanical Systems written by Vadim Utkin and published by CRC Press. This book was released on 2017-12-19 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Apply Sliding Mode Theory to Solve Control Problems Interest in SMC has grown rapidly since the first edition of this book was published. This second edition includes new results that have been achieved in SMC throughout the past decade relating to both control design methodology and applications. In that time, Sliding Mode Control (SMC) has continued to gain increasing importance as a universal design tool for the robust control of linear and nonlinear electro-mechanical systems. Its strengths result from its simple, flexible, and highly cost-effective approach to design and implementation. Most importantly, SMC promotes inherent order reduction and allows for the direct incorporation of robustness against system uncertainties and disturbances. These qualities lead to dramatic improvements in stability and help enable the design of high-performance control systems at low cost. Written by three of the most respected experts in the field, including one of its originators, this updated edition of Sliding Mode Control in Electro-Mechanical Systems reflects developments in the field over the past decade. It builds on the solid fundamentals presented in the first edition to promote a deeper understanding of the conventional SMC methodology, and it examines new design principles in order to broaden the application potential of SMC. SMC is particularly useful for the design of electromechanical systems because of its discontinuous structure. In fact, where the hardware of many electromechanical systems (such as electric motors) prescribes discontinuous inputs, SMC becomes the natural choice for direct implementation. This book provides a unique combination of theory, implementation issues, and examples of real-life applications reflective of the authors’ own industry-leading work in the development of robotics, automobiles, and other technological breakthroughs.

Download or read book Sliding Mode Control written by Andrzej Bartoszewicz and published by BoD – Books on Demand. This book was released on 2011-04-11 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of this monograph is to present a broad range of well worked out, recent application studies as well as theoretical contributions in the field of sliding mode control system analysis and design. The contributions presented here include new theoretical developments as well as successful applications of variable structure controllers primarily in the field of power electronics, electric drives and motion steering systems. They enrich the current state of the art, and motivate and encourage new ideas and solutions in the sliding mode control area.

Download or read book Power Electronics Handbook written by Muhammad H. Rashid and published by Elsevier. This book was released on 2011-01-13 with total page 1409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power electronics, which is a rapidly growing area in terms of research and applications, uses modern electronics technology to convert electric power from one form to another, such as ac-dc, dc-dc, dc-ac, and ac-ac with a variable output magnitude and frequency. It has many applications in our every day life such as air-conditioners, electric cars, sub-way trains, motor drives, renewable energy sources and power supplies for computers. This book covers all aspects of switching devices, converter circuit topologies, control techniques, analytical methods and some examples of their applications. Designed to appeal to a new generation of engineering professionals, Power Electronics Handbook, 3rd Edition features four new chapters covering renewable energy, energy transmission, energy storage, as well as an introduction to Distributed and Cogeneration (DCG) technology, including gas turbines, gensets, microturbines, wind turbines, variable speed generators, photovoltaics and fuel cells, has been gaining momentum for quite some time now.smart grid technology. With this book readers should be able to provide technical design leadership on assigned power electronics design projects and lead the design from the concept to production involving significant scope and complexity. - Contains 45 chapters covering all aspects of power electronics and its applications - Three new chapters now including coverage Energy Sources, Energy Storage and Electric Power Transmission - Contributions from more than fifty leading experts spanning twelve different countries

Download or read book Event Triggered Sliding Mode Control written by Bijnan Bandyopadhyay and published by Springer. This book was released on 2018-02-20 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited monograph provides a comprehensive and in-depth analysis of sliding mode control, focusing on event-triggered implementation. The technique allows to prefix the steady-state bounds of the system, and this is independent of any boundary disturbances. The idea of event-triggered SMC is developed for both single input / single output and multi-input / multi-output linear systems. Moreover, the reader learns how to apply this method to nonlinear systems. The book primarily addresses research experts in the field of sliding mode control, but the book may also be beneficial for graduate students.

Download or read book Hybrid Technologies for Power Generation written by Massimiliano Lo Faro and published by Academic Press. This book was released on 2021-10-30 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid Technologies for Power Generation addresses the topics related to hybrid technologies by coupling conventional thermal engines with novel technologies, including fuel cells, batteries, thermal storage and electrolysis, and reporting on the most recent advances concerning transport and stationary applications. Potential operating schemes of hybrid power generation systems are covered, highlighting possible combinations of technology and guideline selection according to the energy demands of end-users. Going beyond state-of-the-art technological developments for processes, devices and systems, this book discusses the environmental impact and existing hurdles of moving from a single device to new approaches for efficient energy generation, transfer, conversion, high-density storage and consumption. By describing the practical viability of novel devices coupled to conventional thermal devices, this book has a decisive impact in energy system research, supporting those in the energy research and engineering communities. - Covers detailed thermodynamic requirements for multiple smart technologies included in hybrid systems (i.e., FC, electrolysers, supercapacitors, batteries, thermal storage, etc.) - Features fundamental analysis and modeling to optimize the combination of smart technologies with traditional engines - Details protocols for the analysis, operation and requirements of large-scale production

Download or read book Power Electronics Converters and their Control for Renewable Energy Applications written by Arezki Fekik and published by Elsevier. This book was released on 2023-06-21 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronics Converters and their Control for Renewable Energy Applications provides information that helps to solve common challenges with power electronics converters, including loss by switching, heating of power switches, management of switching time, improvement of the quality of the signals delivered by power converters, and improvement of the quality of energy produced by renewable energy sources. This book is of interest to academics, researchers, and engineers in renewable energy, power systems, electrical engineering, electronics, and mechanical engineering. - Includes important visual illustrations and imagery of concise circuit schematics and renewable energy applications - Features a templated approach for step-by-step implementation of the new MPPT algorithm based on recent and intelligent techniques - Provides methods for optimal harnessing of energy from renewable energy sources and converter topology synthesis

Download or read book Integrated Power Electronic Converters and Digital Control written by Ali Emadi and published by CRC Press. This book was released on 2017-12-19 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of the demand for higher efficiencies, smaller output ripple, and smaller converter size for modern power electronic systems, integrated power electronic converters could soon replace conventional switched-mode power supplies. Synthesized integrated converters and related digital control techniques address problems related to cost, space, flexibility, energy efficiency, and voltage regulation—the key factors in digital power management and implementation. Meeting the needs of professionals working in power electronics, as well as advanced engineering students, Integrated Power Electronic Converters and Digital Control explores the many benefits associated with integrated converters. This informative text details boost type, buck type, and buck-boost type integrated topologies, as well as other integrated structures. It discusses concepts behind their operation as well specific applications. Topics discussed include: Isolated DC-DC converters such as flyback, forward, push-pull, full-bridge, and half-bridge Power factor correction and its application Definition of the integrated switched-mode power supplies Steady-state analysis of the boost integrated flyback rectifier energy storage converter Dynamic analysis of the buck integrated forward converter Digital control based on the use of digital signal processors (DSPs) With innovations in digital control becoming ever more pervasive, system designers continue to introduce products that integrate digital power management and control integrated circuit solutions, both hybrid and pure digital. This detailed assessment of the latest advances in the field will help anyone working in power electronics and related industries stay ahead of the curve.

Download or read book Smart Sensors Measurements and Instrumentation written by Santhosh K V and published by Springer Nature. This book was released on 2021-05-10 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of Control Instrumentation and System Conference, (CISCON 2020) held at Manipal Institute of Technology, MAHE, Manipal. It examines a wide spectrum covering the latest trends in the fields of instrumentation, sensors and systems, and industrial automation and control. The topics covered include image and signal processing, robotics, renewable energy, power systems and power drives, performance attributes of MEMS, multi-sensor data fusion, machine learning, optimization techniques, process control, safety monitoring, safety critical control, supervisory control, system modeling and virtual instrumentation. The book is a valuable reference for researchers and professionals interested in sensors, adaptive control, automation and control and allied fields.

Download or read book Modern Control of DC Based Power Systems written by Marco Cupelli and published by Academic Press. This book was released on 2018-06-08 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Control of DC-Based Power Systems: A Problem-Based Approach addresses the future challenges of DC Grids in a problem-based context for practicing power engineers who are challenged with integrating DC grids in their existing architecture. This reference uses control theory to address the main concerns affecting these systems, things like generation capacity, limited maximum load demands and low installed inertia which are all set to increase as we move towards a full renewable model. Offering a new approach for a problem-based, practical approach, the book provides a coordinated view of the topic with MATLAB®, Simulink® files and additional ancillary material provided. - Includes Simulink® Files (of examples and for lab training classes) and MATLAB® files - Presents video slides to support the problem-based approach to understanding DC Power System control and application - Provides stability analysis of DC networks and examples of common stability problems

Download or read book Selected Papers from IEEE ICKII 2018 written by TeenHang Meen and published by MDPI. This book was released on 2019-08-02 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue Selected Papers from IEEE ICKII 2018 that was published in Sensors