Download or read book Fitness for Service Fracture Assessment of Structures Containing Cracks written by Uwe Zerbst and published by Academic Press. This book was released on 2013-10-22 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of Fitness-for-Service Fracture Assessment of Structures Containing Cracks is to facilitate the use of fracture mechanics based failure assessment procedures for the evaluation and design of structures and components. All practical structures contain flaws and the optimum combination of cost efficiency and safety whilst achieving the required capability, can only be realised by using state of the art methods such as that represented by the European flaw assessment method SINTAP/FITNET to analyse the safety risk. This book is written by practitioners with extensive experience in both the development and use of integrity assessment methods and provides comprehensive information on the basic principles and use of analytical flaw assessment. It provides an introduction to the method, its background, how it can be applied, its potential and, importantly, its limitations. The explanations are complimented by using a large number of worked examples and validation exercises which illustrate all aspects of the procedure. In addition, for students and engineers who are new to the subject, a comprehensive glossary of basic terms used in fracture mechanics based integrity evaluations is included. The topics addressed include: Crack driving force (CDF) and failure assessment diagram (FAD) type analyses Preparation of the input parameters (crack dimensions, stress-strain properties, fracture toughness, statistical aspects) Determination of the model parameters, (stress intensity factor and yield load solutions) Treatment of combined primary and secondary loading, together with residual stress effects Analysis of the effect of constraint effects (treatment of small defects and section size effects) Treatment of mixed mode loading Consideration of the influences of strength mismatch Reliability aspects Comprehensive description of the use of structural integrity methods to optimise cost effectiveness and safety Detailed description of how to evaluate the integrity of structures containing cracks Valuable background information for understanding the methods, their potential and limitations Large number of worked examples, which demonstrate all aspects of the methods Descriptive, readable writing style Applicable to a wide range of interests, from the student (university or self study) to the expert who requires a 'state of the art' document

Download or read book Fitness for Service Fracture Assessment of Structures Containing Cracks written by Uwe Zerbst and published by Academic Press. This book was released on 2007-10-17 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: This up-to-date work has a major reputation and will be the definitive handbook explaining the many complex techniques to complete a structural integrity analysis. It will be an invaluable tool to any engineering researchers and practicing engineers involved with all aspects of structural integrity. In view of the outstanding relevance of SINTAP, an introduction of the procedure is needed which combines this experience with a basic outline of the procedure, guidance on how to use it for various applications, and background information which is necessary to avoid errors in application. This boo.

Download or read book Fracture and Fatigue of Welded Joints and Structures written by K Macdonald and published by Elsevier. This book was released on 2011-04-19 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: The failure of any welded joint is at best inconvenient and at worst can lead to catastrophic accidents. Fracture and fatigue of welded joints and structures analyses the processes and causes of fracture and fatigue, focusing on how the failure of welded joints and structures can be predicted and minimised in the design process. Part one concentrates on analysing fracture of welded joints and structures, with chapters on constraint-based fracture mechanics for predicting joint failure, fracture assessment methods and the use of fracture mechanics in the fatigue analysis of welded joints. In part two, the emphasis shifts to fatigue, and chapters focus on a variety of aspects of fatigue analysis including assessment of local stresses in welded joints, fatigue design rules for welded structures, k-nodes for offshore structures and modelling residual stresses in predicting the service life of structures. With its distinguished editor and international team of contributors, Fracture and fatigue of welded joints and structures is an essential reference for mechanical, structural and welding engineers, as well as those in the academic sector with a research interest in the field. Analyses the processes and causes of fracture and fatigue, focusing predicting and minimising the failure of welded joints in the design process Assesses the fracture of welded joints and structure featuring constraint-based fracture mechanics for predicting joint failure Explores specific considerations in fatigue analysis including the assessment of local stresses in welded joints and fatigue design rules for welded structures

Download or read book Recent Trends in Fracture and Damage Mechanics written by Geralf Hütter and published by Springer. This book was released on 2015-09-01 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a wide range of topics in fracture and damage mechanics. It presents historical perspectives as well as recent innovative developments, presented by peer reviewed contributions from internationally acknowledged authors. The volume deals with the modeling of fracture and damage in smart materials, current industrial applications of fracture mechanics, and it explores advances in fracture testing methods. In addition, readers will discover trends in the field of local approach to fracture and approaches using analytical mechanics. Scholars in the fields of materials science, engineering and computational science will value this volume which is dedicated to Meinhard Kuna on the occasion of his 65th birthday in 2015. This book incorporates the proceedings of an international symposium that was organized to honor Meinhard Kuna’s contributions to the field of theoretical and applied fracture and damage mechanics.

Download or read book Weight Function Methods in Fracture Mechanics written by Xue-Ren Wu and published by Springer Nature. This book was released on 2022-07-04 with total page 665 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic and standardized approach based on the authors’ over 30 years of research experience with weight function methods, as well as the relevant literature. Fracture mechanics has become an indispensable tool for the design and safe operation of damage-tolerant structures in many important technical areas. The stress intensity factor—the characterizing parameter of the crack tip field—is the foundation of fracture mechanics analysis. The weight function method is a powerful technique for determining stress intensity factors and crack opening displacements for complex load conditions, with remarkable computational efficiency and high accuracy. The book presents the theoretical background of the weight function methods, together with a wealth of analytical weight functions and stress intensity factors for two- and three-dimensional crack geometries; many of these have been incorporated into national, international standards and industrial codes of practice. The accuracy of the results is rigorously verified, and various sample applications are provided. Accordingly, the book offers an ideal reference source for graduate students, researchers, and engineers whose work involves fracture and fatigue of materials and structures, who need not only stress intensity factors themselves but also efficient and reliable tools for obtaining them.

Download or read book Tubular Structures XIII written by Ben Young and published by CRC Press. This book was released on 2010-11-12 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tubular Structures XIII contains the latest scientific and engineering developments in the field of tubular steel structures, as presented at the 13th International Symposium on Tubular Structures (ISTS13), Hong Kong, 15 - 17 December 2010. The International Symposium on Tubular Structures (ISTS) has a longstanding reputation for being the pri

Download or read book Fatigue and Fracture of Weldments written by Uwe Zerbst and published by Springer. This book was released on 2018-12-11 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive and thorough guide to those readers who are lost in the often-confusing context of weld fatigue. It presents straightforward information on the fracture mechanics and material background of weld fatigue, starting with fatigue crack initiation and short cracks, before moving on to long cracks, crack closure, crack growth and threshold, residual stress, stress concentration, the stress intensity factor, J-integral, multiple cracks, weld geometries and defects, microstructural parameters including HAZ, and cyclic stress-strain behavior. The book treats all of these essential and mutually interacting parameters using a unique form of analysis.

Download or read book Proceedings of First IJFatigue FFEMS Joint Workshop written by and published by Gruppo Italiano Frattura. This book was released on with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Plasticity and Fracture written by Wolfgang Brocks and published by Springer. This book was released on 2017-08-16 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on 40 years of research and teaching in the fields of fracture mechanics and plasticity. It will bring students and engineers from various disciplines up to date on key concepts that have become increasingly important in the design of safety-relevant engineering structures in general and in modern lightweight structures in the transportation industry in particular. Primarily intended for graduate students in the engineering sciences and practicing structural engineers, it employs a multidisciplinary approach that comprises theoretical concepts, numerical methods, and experimental techniques. In addition, it includes a wealth of analytical and numerical examples, used to illustrate the applications of the concepts discussed.

Download or read book Residual Stress and Its Effects on Fatigue and Fracture written by Anastasius Youtsos and published by Springer Science & Business Media. This book was released on 2007-05-20 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contents of this book have been grouped into three topic areas covering theoretical /numerical and experimental analyses of residual stress and its effects on fatigue and fracture. It details recent advances on its title topics by leading European experts and contains theoretical/numerical studies of high value backed by sound experimental data. It also provides experimental studies based on novel and verifiable testing methods.

Download or read book Finite Elements in Fracture Mechanics written by Meinhard Kuna and published by Springer Science & Business Media. This book was released on 2013-07-19 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture mechanics has established itself as an important discipline of growing interest to those working to assess the safety, reliability and service life of engineering structures and materials. In order to calculate the loading situation at cracks and defects, nowadays numerical techniques like finite element method (FEM) have become indispensable tools for a broad range of applications. The present monograph provides an introduction to the essential concepts of fracture mechanics, its main goal being to procure the special techniques for FEM analysis of crack problems, which have to date only been mastered by experts. All kinds of static, dynamic and fatigue fracture problems are treated in two- and three-dimensional elastic and plastic structural components. The usage of the various solution techniques is demonstrated by means of sample problems selected from practical engineering case studies. The primary target group includes graduate students, researchers in academia and engineers in practice.

Download or read book Tubular Structures XIV written by Leroy Gardner and published by CRC Press. This book was released on 2012-08-24 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tubular Structures XIV contains the latest scientific and engineering developments in the field of tubular steel structures, as presented at the 14th International Symposium on Tubular Structures (ISTS14, Imperial College London, UK, 12-14 September 2012). The International Symposium on Tubular Structures (ISTS) has a long-standing reputation for b

Download or read book Atti del XXI Convegno Nazionale del Gruppo Italiano Frattura written by and published by Gruppo Italiano Frattura. This book was released on with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Lloyd s Register Technical Association 1997 1998 written by Lloyd's Register Foundation and published by Lloyd's Register . This book was released on 1997-01-01 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Lloyd’s Register Technical Association (LRTA) was established in 1920 with the primary objective of sharing technical expertise and knowledge within Lloyd’s Register. Publications have consistently been released on a yearly basis, with a brief interruption between 1938 and 1946. These publications serve as a key reference point for best practices and were initially reserved for internal use to maximise LR’s competitive advantage. Today, the LRTA takes a fresh approach, focusing on collaboration by combining professional expertise from across LRF & Group to ensure a frequent output of fresh perspectives and relevant content. The LRTA has evolved into a Group-wide initiative that identifies, captures, and shares knowledge spanning various business streams and functions. To support this modern approach, the LRTA has adopted a new structure featuring representatives and senior governance across the business streams and the LR Foundation. The Lloyd's Register Technical Association Papers should be seen as historical documents representing earlier viewpoints and are not reflective of current thinking and perspectives by the current LR Technical Association.

Download or read book Safety Reliability and Risks Associated with Water Oil and Gas Pipelines written by Guy Pluvinage and published by Springer Science & Business Media. This book was released on 2007-12-14 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Springer has here produced a major debut in English-language publications. It’s the first book to describe very recent methods for pipe defect assessment such as notch fracture mechanics and critical gross strain. Pipelines remain the least expensive transcontinental mean of transport compared to the rail-bound or terrestrial transport. It has become increasingly paramount to ensure the safe utilization of such plant in order to prevent economical, social and ecological losses. This book adds much to the body of knowledge in this area.

Download or read book Structural Integrity Assessment written by P. Stanley and published by CRC Press. This book was released on 1992-03-10 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: The assessment of structural integrity is a vitally important consideration in many fields of engineering, which has an influence on the full range of professional activities from conception, design and analysis, through operation to residual life evaluation and possible life extension. In devising satisfactory procedures for this purpose there is

Download or read book Fatigue and Fracture Mechanics written by Walter G. Reuter and published by ASTM International. This book was released on 2002-12-31 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the whole of Asia and the Pacific region, this text provides both an analytic overview and specific data for each of the 60 countries. Introductory chapters cover regional issues, including: a regional review with the year's trends, developments and key events' analysis of the threat of terrorism in the region; the effects of deflation on the economy; the water crisis and its impact on the poor; and the successes and failures of micro-credit in the region.