Download or read book Finite Element Approximation for Optimal Shape Material and Topology Design written by J. Haslinger and published by Wiley. This book was released on 1996-08-06 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the formulation, approximation and numerical solution of optimal shape design problems: from the continuous model through its discretization and approximation results, to sensitivity analysis and numerical realization. Shape optimization of structures is addressed in the first part, using variational inequalities of elliptic type. New results, such as contact shape optimization for bodies made of non-linear material, sensitivity analysis based on isoparametric technique, and analysis of cost functionals related to contact stress distribution are included. The second part presents new concepts of shape optimization based on a fictitious domain approach. Finally, the application of the shape optimization methodology in the material design is discussed. This second edition is a fully revised and up-dated version of Finite Element Method for Optimal Shape Design. Numerous numerical examples illustrate the theoretical results, and industrial applications are given.
Download or read book Finite Element Approximation for Optimal Shape Design written by J. Haslinger and published by . This book was released on 1988 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: A text devoted to the mathematical basis of optimal shape design, to finite element approximation and to numerical realization by applying optimization techniques. The aim is to computerize the design process, thus reducing the time needed to design or to improve an existing design.
Download or read book Introduction to Shape Optimization written by J. Haslinger and published by SIAM. This book was released on 2003-01-01 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: The efficiency and reliability of manufactured products depend on, among other things, geometrical aspects; it is therefore not surprising that optimal shape design problems have attracted the interest of applied mathematicians and engineers. This self-contained, elementary introduction to the mathematical and computational aspects of sizing and shape optimization enables readers to gain a firm understanding of the theoretical and practical aspects so they may confidently enter this field. Introduction to Shape Optimization: Theory, Approximation, and Computation treats sizing and shape optimization comprehensively, covering everything from mathematical theory (existence analysis, discretizations, and convergence analysis for discretized problems) through computational aspects (sensitivity analysis, numerical minimization methods) to industrial applications. Applications include contact stress minimization for elasto-plastic bodies, multidisciplinary optimization of an airfoil, and shape optimization of a dividing tube. By presenting sizing and shape optimization in an abstract way, the authors are able to use a unified approach in the mathematical analysis for a large class of optimization problems in various fields of physics. Audience: the book is written primarily for students of applied mathematics, scientific computing, and mechanics. Most of the material is directed toward graduate students, although a portion of it is suitable for senior undergraduate students. Readers are assumed to have some knowledge of partial differential equations and their numerical solution, as well as modern programming language such as C++ Fortran 90.
Download or read book Optimization of Structural Topology Shape and Material written by Martin P. Bendsoe and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past, the possibilities of structural optimization were restricted to an optimal choice of profiles and shape. Further improvement can be obtained by selecting appropriate advanced materials and by optimizing the topology, i.e. finding the best position and arrangement of structural elements within a construction. The optimization of structural topology permits the use of optimization algorithms at a very early stage of the design process. The method presented in this book has been developed by Martin Bendsoe in cooperation with other researchers and can be considered as one of the most effective approaches to the optimization of layout and material design.
Download or read book Shape Optimization Problems written by Hideyuki Azegami and published by Springer Nature. This book was released on 2020-09-30 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides theories on non-parametric shape optimization problems, systematically keeping in mind readers with an engineering background. Non-parametric shape optimization problems are defined as problems of finding the shapes of domains in which boundary value problems of partial differential equations are defined. In these problems, optimum shapes are obtained from an arbitrary form without any geometrical parameters previously assigned. In particular, problems in which the optimum shape is sought by making a hole in domain are called topology optimization problems. Moreover, a problem in which the optimum shape is obtained based on domain variation is referred to as a shape optimization problem of domain variation type, or a shape optimization problem in a limited sense. Software has been developed to solve these problems, and it is being used to seek practical optimum shapes. However, there are no books explaining such theories beginning with their foundations. The structure of the book is shown in the Preface. The theorems are built up using mathematical results. Therefore, a mathematical style is introduced, consisting of definitions and theorems to summarize the key points. This method of expression is advanced as provable facts are clearly shown. If something to be investigated is contained in the framework of mathematics, setting up a theory using theorems prepared by great mathematicians is thought to be an extremely effective approach. However, mathematics attempts to heighten the level of abstraction in order to understand many things in a unified fashion. This characteristic may baffle readers with an engineering background. Hence in this book, an attempt has been made to provide explanations in engineering terms, with examples from mechanics, after accurately denoting the provable facts using definitions and theorems.
Download or read book Computational Methods for Optimal Design and Control written by J. Borggaard and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the Second International Workshop on Optimal Design and Control, held in Arlington, Virginia, 30 September-3 Octo ber, 1997. The First Workshop was held in Blacksburg, Virginia in 1994. The proceedings of that meeting also appeared in the Birkhauser series on Progress in Systems and Control Theory and may be obtained through Birkhauser. These workshops were sponsored by the Air Force Office of Scientific Re search through the Center for Optimal Design and Control (CODAC) at Vrrginia Tech. The meetings provided a forum for the exchange of new ideas and were designed to bring together diverse viewpoints and to highlight new applications. The primary goal of the workshops was to assess the current status of research and to analyze future directions in optimization based design and control. The present volume contains the technical papers presented at the Second Workshop. More than 65 participants from 6 countries attended the meeting and contributed to its success. It has long been recognized that many modern optimal design problems are best viewed as variational and optimal control problems. Indeed, the famous problem of determining the body of revolution that produces a minimum drag nose shape in hypersonic How was first proposed by Newton in 1686. Optimal control approaches to design can provide theoretical and computational insight into these problems. This volume contains a number of papers which deal with computational aspects of optimal control.
Download or read book OPTIMIZATION AND OPERATIONS RESEARCH Volume III written by Ulrich Derigs and published by EOLSS Publications. This book was released on 2009-02-09 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimization and Operations Research is a component of Encyclopedia of Mathematical Sciences in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. The Theme on Optimization and Operations Research is organized into six different topics which represent the main scientific areas of the theme: 1. Fundamentals of Operations Research; 2. Advanced Deterministic Operations Research; 3. Optimization in Infinite Dimensions; 4. Game Theory; 5. Stochastic Operations Research; 6. Decision Analysis, which are then expanded into multiple subtopics, each as a chapter. These four volumes are aimed at the following five major target audiences: University and College students Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.
Download or read book Scientific Computing in Electrical Engineering written by Angelo Marcello Anile and published by Springer Science & Business Media. This book was released on 2007-01-10 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of papers presented at the last Scientific Computing in Electrical Engineering (SCEE) Conference, held in Sicily, in 2004. The series of SCEE conferences aims at addressing mathematical problems which have a relevancy to industry. The areas covered at SCEE-2004 were: Electromagnetism, Circuit Simulation, Coupled Problems and General mathematical and computational methods.
Download or read book From Convexity to Nonconvexity written by R.P. Gilbert and published by Springer Science & Business Media. This book was released on 2013-12-01 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of papers is dedicated to the memory of Gaetano Fichera, a great mathematician and also a good friend to the editors. Regrettably it took an unusual amount of time to bring this collection out. This was primarily due to the fact that the main editor who had collected all of the materials, for this volume, P. D. Panagiotopoulos, died unexpectedly during the period when we were editing the manuscript. The other two editors in appreciation of Panagiotopoulos' contribution to this field, believe it is therefore fitting that this collection be dedicated to his memory also. The theme of the collection is centered around the seminal research of G. Fichera on the Signorini problem. Variants on this idea enter in different ways. For example, by bringing in friction the problem is no longer self-adjoint and the minimization formulation is not valid. A large portion of this collection is devoted to survey papers concerning hemivariational methods, with a main point of its application to nonsmooth mechanics. Hemivariational inequali ties, which are a generalization of variational inequalities, were pioneered by Panagiotopoulos. There are many applications of this theory to the study of non convex energy functionals occurring in many branches of mechanics. An area of concentration concerns contact problems, in particular, quasistatic and dynamic contact problems with friction and damage. Nonsmooth optimization methods which may be divided into the main groups of subgradient methods and bundle methods are also discussed in this collection.
Download or read book Control and Boundary Analysis written by John Cagnol and published by CRC Press. This book was released on 2005-03-04 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises selected papers from the 21st Conference on System Modeling and Optimization in Sophia Antipolis, France. It covers over three decades of studies involving partial differential systems and equations. Topics include: the modeling of continuous mechanics involving fixed boundary, control theory, shape optimization and moving bou
Download or read book Shape and Layout Optimization of Structural Systems and Optimality Criteria Methods written by G.I.N. Rozvany and published by Springer. This book was released on 2014-05-04 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shape and layout optimization represent some of the most useful but also most difficult classes of problems in structural design, which have been investigated in detail only during the last few years. Shape optimization is concerned with the optimal shape of boundaries of continua or of interfaces between two materials in composites. Layout optimization deals with the simultaneous optimization of the topology, geometry and cross-sectional sizes of structural systems. In spite of its complextiy, layout optimization is a very rewarding task, because it results in much greater savings than the optimization of cross-sectional sizes only. Because of their important role in shape and layout optimization, the book also covers in detail new optimality criteria methods, which are capable of handling many thousand design variables and active design contraints. Shape and layout optimization is becoming an indispensable tool in the design of aeroplanes, space structures, cars, ships, building and civil engineering structures, power stations, chemical plants, artificial organs, sporting equipment, and all other solid systems where stresses and deformations play an important role.
Download or read book Introduction to Shape Optimization written by J. Haslinger and published by SIAM. This book was released on 2003-01-01 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Treats sizing and shape optimization in a comprehensive way, covering everything from mathematical theory through computational aspects to industrial applications.
Download or read book Topology Optimization written by Martin Philip Bendsoe and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topology optimization method solves the basic enginee- ring problem of distributing a limited amount of material in a design space. The first edition of this book has become the standard text on optimal design which is concerned with the optimization of structural topology, shape and material. This edition, has been substantially revised and updated to reflect progress made in modelling and computational procedures. It also encompasses a comprehensive and unified description of the state-of-the-art of the so-called material distribution method, based on the use of mathematical programming and finite elements. Applications treated include not only structures but also materials and MEMS.
Download or read book Mathematical Methods in Continuum Mechanics of Solids written by Martin Kružík and published by Springer. This book was released on 2019-03-02 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book primarily focuses on rigorous mathematical formulation and treatment of static problems arising in continuum mechanics of solids at large or small strains, as well as their various evolutionary variants, including thermodynamics. As such, the theory of boundary- or initial-boundary-value problems for linear or quasilinear elliptic, parabolic or hyperbolic partial differential equations is the main underlying mathematical tool, along with the calculus of variations. Modern concepts of these disciplines as weak solutions, polyconvexity, quasiconvexity, nonsimple materials, materials with various rheologies or with internal variables are exploited. This book is accompanied by exercises with solutions, and appendices briefly presenting the basic mathematical concepts and results needed. It serves as an advanced resource and introductory scientific monograph for undergraduate or PhD students in programs such as mathematical modeling, applied mathematics, computational continuum physics and engineering, as well as for professionals working in these fields.
Download or read book Finite Element Method for Hemivariational Inequalities written by J. Haslinger and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hemivariational inequalities represent an important class of problems in nonsmooth and nonconvex mechanics. By means of them, problems with nonmonotone, possibly multivalued, constitutive laws can be formulated, mathematically analyzed and finally numerically solved. The present book gives a rigorous analysis of finite element approximation for a class of hemivariational inequalities of elliptic and parabolic type. Finite element models are described and their convergence properties are established. Discretized models are numerically treated as nonconvex and nonsmooth optimization problems. The book includes a comprehensive description of typical representants of nonsmooth optimization methods. Basic knowledge of finite element mathematics, functional and nonsmooth analysis is needed. The book is self-contained, and all necessary results from these disciplines are summarized in the introductory chapter. Audience: Engineers and applied mathematicians at universities and working in industry. Also graduate-level students in advanced nonlinear computational mechanics, mathematics of finite elements and approximation theory. Chapter 1 includes the necessary prerequisite materials.
Download or read book A Variational Inequality Approach to free Boundary Problems with Applications in Mould Filling written by Jörg Steinbach and published by Birkhäuser. This book was released on 2012-12-06 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph studies an evolutionary variational inequality approach to a degenerate moving free boundary problem. It takes an intermediate position between elliptic and parabolic inequalities and comprises an elliptic differential operator, a memory term and time-dependent convex constraint sets. Finally, a description of injection and compression moulding is presented in terms of different mathematical models, a generalized Hele-Shaw flow, a distance concept and Navier-Stokes flow.
Download or read book Structural Optimization with Uncertainties written by N.V. Banichuk and published by Springer Science & Business Media. This book was released on 2009-12-01 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural optimization is currently attracting considerable attention. Interest in - search in optimal design has grown in connection with the rapid development of aeronautical and space technologies, shipbuilding, and design of precision mach- ery. A special ?eld in these investigations is devoted to structural optimization with incomplete information (incomplete data). The importance of these investigations is explained as follows. The conventional theory of optimal structural design - sumes precise knowledge of material parameters, including damage characteristics and loadings applied to the structure. In practice such precise knowledge is seldom available. Thus, it is important to be able to predict the sensitivity of a designed structure to random ?uctuations in the environment and to variations in the material properties. To design reliable structures it is necessary to apply the so-called gu- anteed approach, based on a “worst case scenario” or a more optimistic probabilistic approach, if we have additional statistical data. Problems of optimal design with incomplete information also have consid- able theoretical importance. The introduction and investigations into new types of mathematical problems are interesting in themselves. Note that some ga- theoretical optimization problems arise for which there are no systematic techniques of investigation. This monograph is devoted to the exposition of new ways of formulating and solving problems of structural optimization with incomplete information. We recall some research results concerning the optimum shape and structural properties of bodies subjected to external loadings.
