Download or read book Finite Element Analysis of Glass Fibre Reinforced Thermoplastic Composites Fore Structural Automotive Components written by and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis describes the investigation and development of damage modelling techniques for woven long glass fibre reinforced polypropylene matrix composites. The objective of the work was to develop and validate predictive models for the intralaminar damage behaviour of these materials, with the aim of applying the results to an industrial demonstrator component. Two damage modelling methods were investigated. The first, based on ply-level failure criteria and implemented in an implicit finite element code, was developed and validated using a range of coupon tests for a balanced weave 60% weight fraction commingled glass/polypropylene composite. The second method utilised a model previously implemented in the commercial explicit finite element code, PAMCRASH. This model was calibrated and validated using the same coupon tests as the first model. The models were subsequently used to simulate an industrial demonstrator component, during a two-phase design and development programme. The demonstrator, an automotive side intrusion beam, was designed and predictively modelled using the two damage modelling techniques investigated. Finally, the composite component was compared to a steel side intrusion beam, using a quasi-static vehicle test to a current legislative standard. This test showed comparable performance in terms of strength and stiffness for the two beams. It was concluded that the implicit finite element damage modelling technique can account for the damage and failure modes observed in a woven glass fibre reinforced polypropylene composite, but is limited when considering high levels of material nonlinearity and damage development, due to the stability of the implicit finite element method. It was also concluded that the explicit finite element technique was more suited to the simulation of damage development in thermoplastic matrix composite components, although the research showed that the model investigated was limited when considering shear damaging behaviour in a woven fibre reinforced composite.
Download or read book Finite Element Analysis of Glass Fibre Reinforced Thermoplastic Composites for Structural Automotive Components written by Martin J. Wilson and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Composite Materials for Automotive Applications written by Ahmed Elmarakbi and published by John Wiley & Sons. This book was released on 2013-10-09 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry faces many challenges, including increased global competition, the need for higher-performance vehicles, a reduction in costs and tighter environmental and safety requirements. The materials used in automotive engineering play key roles in overcoming these issues: ultimately lighter materials mean lighter vehicles and lower emissions. Composites are being used increasingly in the automotive industry due to their strength, quality and light weight. Advanced Composite Materials for Automotive Applications: Structural Integrity and Crashworthiness provides a comprehensive explanation of how advanced composite materials, including FRPs, reinforced thermoplastics, carbon-based composites and many others, are designed, processed and utilized in vehicles. It includes technical explanations of composite materials in vehicle design and analysis and covers all phases of composite design, modelling, testing and failure analysis. It also sheds light on the performance of existing materials including carbon composites and future developments in automotive material technology which work towards reducing the weight of the vehicle structure. Key features: Chapters written by world-renowned authors and experts in their own fields Includes detailed case studies and examples covering all aspects of composite materials and their application in the automotive industries Unique topic integration between the impact, crash, failure, damage, analysis and modelling of composites Presents the state of the art in composite materials and their application in the automotive industry Integrates theory and practice in the fields of composite materials and automotive engineering Considers energy efficiency and environmental implications Advanced Composite Materials for Automotive Applications: Structural Integrity and Crashworthiness is a comprehensive reference for those working with composite materials in both academia and industry, and is also a useful source of information for those considering using composites in automotive applications in the future.
Download or read book Design and Manufacture of Textile Composites written by A C Long and published by CRC Press. This book was released on 2006-01-05 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Textile composites encompass a rather narrow range of materials, based on three-dimensional reinforcements produced using specialist equipment. This book describes the design, manufacture and applications of textile composites. The intention is to describe the broad range of polymer composite materials with textile reinforcements, from woven and non-crimp commodity fabrics to 3-D textiles and their applications. The book gives particular attention to the modelling of textile structures, composites manufacturing methods, and subsequent component performance. This practical book is an invaluable guide for manufacturers of polymer composite components, end-users and designers, structural materials researchers, and textile manufacturers involved in the development of new products with textile composites.
Download or read book Design and Modeling of Mechanical Systems IV written by Nizar Aifaoui and published by Springer Nature. This book was released on 2020-02-26 with total page 961 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a collection of original peer-reviewed contributions presented at the 8th International Congress on Design and Modeling of Mechanical Systems (CMSM’2019), held in Hammamet, Tunisia, from the 18th to the 20th of March 2019. It reports on research, innovative industrial applications and case studies concerning mechanical systems and related to modeling and analysis of materials and structures, multiphysics methods, nonlinear dynamics, fluid structure interaction and vibroacoustics, design and manufacturing engineering. Continuing on the tradition of the previous editions, these proceedings offers a broad overview of the state-of-the art in the field and a useful resource for academic and industry specialists active in the field of design and modeling of mechanical systems. CMSM’2019 was jointly organized by two leading Tunisian research laboratories: the Mechanical Engineering Laboratory of the National Engineering School of Monastir, University of Monastir and the Mechanical, Modeling and Manufacturing Laboratory of the National Engineering School of Sfax, University of Sfax.
Download or read book Design of Automotive Composites written by Charles Lu and published by SAE International. This book was released on 2014-08-04 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of Automotive Composites reports that successful designs of automotive composites occurred recently in this arena. The chapters consist of eleven technical papers selected from the Automotive Composites and other relevant sessions that the editors have been organizing for the SAE International World Congress over the past five years. The book is divided into four sections: o Body Structures o Powertrain Components o Suspension Components o Electrical and Alternative Vehicle Components The composite design examples presented in Design of Automotive Composites come from the major OEMs and top-tier suppliers and are most relevant to the automotive materials challenges currently faced by the industry. Many of the innovative ideas have already been implemented on existing or new model vehicles, although a great deal of innovation is still in the works. With the advantage of supporting lightweighting and faster time to market, there is little doubt that composite materials can provide many tangible benefits and will become, over time, the material of choice for automakers.
Download or read book FRC 2000 Composites for the Millennium written by A G Gibson and published by Elsevier. This book was released on 2000-09-11 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceeding of the 8th in this successful series of conferences organised by the Centre for Composite Materials Engineering of the University of Newcastle upon Tyne and sponsored by the Institute of Mechanical Engineers (ImechE) and The Institute of Materials (IoM).The papers presented show how FRCs are being used in a steadily increasing range of technologies and how their properties make them appropriate choices for designers and processors interested in exploiting the potential of these highly versatile materials.Composites applications now extend well beyond their established uses in aerospace, marine and land transport and, although exciting developments are still taking place in these fields, it is the rapidly expanding range of civil engineering and infrastructure applications which offers the greatest potential for novel uses. FRC's high strength, light weight and durability make them appropriate for large scale structures and, as these proceedings demonstrate, they are increasingly being specified as an advantageous alternative to more traditional materials.
Download or read book Finite Element Modelling of Composite Materials and Structures written by F L Matthews and published by Elsevier. This book was released on 2000-10-27 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finite element modelling of composite materials and structures provides an introduction to a technique which is increasingly being used as an analytical tool for composite materials.The text is presented in four parts: Part one sets the scene and reviews the fundamentals of composite materials together with the basic nature of FRP and its constituents. Two-dimensional stress-strain is covered, as is laminated plated theory and its limitations. Part two reviews the basic principles of FE analysis, starting with underlying theoretical issues and going on to show how elements are derived, a model is generated and results are processed. Part three builds on the basics of FE analysis and considers the particular issues that arise in applying finite elements to composites, especially to the layered nature of the material. Part four deals with the application of FE to FRP composites, presenting analytical models alongside FE representations. Specific issues addressed include interlaminar stresses, fracture delamination, joints and fatigue. This book is invaluable for students of materials science and engineering, and for engineers and others wishing to expand their knowledge of structural analysis. Covers important work on finite element analysis of composite material performance Based on material developed for an MSc course at Imperial College, London, UK Covers particular problems such as holes, free edges with FE results compared with experimental data and classical analysis
Download or read book Publications of the National Institute of Standards and Technology Catalog written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1980 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NBS Special Publication written by and published by . This book was released on 1968 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Applied Research on Textile and Materials IX written by Slah Msahli and published by Springer Nature. This book was released on 2022-08-22 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of CIRATM-9. The papers present the latest scientific concepts and technological developments in textile and materials of worldwide researchers and practitioners. The conference promotes sharing ideas and emerging technologies and fosters research and development collaborations amongst academia, research institutions and relevant industries. CIRATM is the first international conference applied on textiles in Tunisia and all Maghreb. It is a regular conference organized every two year since 2004. It focuses on all textile and materials fields. It joints together all actors of textile field and share research with many international collaborators. This edition is organized with the collaboration of 4 Tunisian partners and 6 international associates and institutions · Laboratory of Textile Engineering (LGTex, Tunisia), · Monastir university (Tunisia) · Tunisian Association of Textile Researchers (ATCTex, Tunisia) · Le pôle de compétitivité Monastir-El Fejja (mfcpole, Tunisia) · Association of the universities for textiles (AUTEX, International) · Balkan Society of textile engineering (BASTE) · National research & development institute for textile and leather (INCDTP, Bucharest- Romania) · Yazid University (Iran) · Centre d'Essais Textile (Cetelor, Lorraine - France) · Center of Textile Science and Technology (2C2T – University of Minho, Portugal)
Download or read book Finite Element Analysis of Composite Materials Using ANSYS written by Ever J. Barbero and published by CRC Press. This book was released on 2013-12-11 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing structures using composite materials poses unique challenges, especially due to the need for concurrent design of both material and structure. Students are faced with two options: textbooks that teach the theory of advanced mechanics of composites, but lack computational examples of advanced analysis, and books on finite element analysis
Download or read book Publications written by United States. National Bureau of Standards and published by . This book was released on 1980 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Investigation Into Finite Element Structural Analysis of Designs with Randomly Oriented Continuous Fiber Reinforced Thermoplastic Composite Sheet written by Raymond F. Kolberg and published by . This book was released on 1987 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Finite Element Analysis of Polymers and Composites written by Sathish Kumar Palaniappan and published by Elsevier. This book was released on 2024-09-06 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finite Element Analysis of Polymers and its Composites offers up-to-date and significant findings on the finite element analysis of polymers and its composite materials. It is important to point out that to date there are no books that have been published on this concept. Thus, academicians, researchers, scientists, engineers, and students in the similar field will benefit from this highly applications-oriented book that summarizes the experimental, mathematical, and numerical analysis of polymers and composite materials through the finite element method. The book provides detailed and comprehensive information on mechanical properties, fatigue and creep behavior, thermal behavior, vibrational analysis, testing methods, and their modeling techniques. In addition, the book lists the main industrial sectors in which polymers and composite materials simulation is used, and their gains from it, including aeronautics, medical, aerospace, automotive, naval, energy, civil, sports, manufacturing, and even electronics.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book International Journal of Materials Product Technology written by and published by . This book was released on 1988 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt:
