Download or read book Solid liquid Separation written by and published by . This book was released on 1991 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solid Liquid Filtration and Separation Technology written by Albert Rushton and published by John Wiley & Sons. This book was released on 2008-07-11 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: A valuable presentation of theoretical and practical information in the area of liquid-solid filtration. The development of theoretical models is highlighted with practical design data and problem-related examples. Modern trends, e.g., membrane systems, are reported together with the fundamental aspects of particulate technology. The increasing interest in pollution control and environmental protection provides an expansive market for this book. Chemical engineers, chemists, physicists, water treatment/sewage engineers, civil engineers and all those concerned with filtration and pollution will find this book of tremendous value and practical use.
Download or read book Solid Liquid Separation Equipment Selection and Process Design written by Steve Tarleton and published by Elsevier. This book was released on 2006-12-07 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this volume, the third in a set specifically written for the industrial process and chemical engineer, the authors provide the detailed information on filtration equipment and media which allows the reader to then consider the pre-treatment of suspensions, selection of the most appropriate equipment for the task, data analysis and the subsequent design of the processes involved for particular separations. The result is a comprehensive book which is designed to be used frequently and referred to regularly in order to achieve better industrial separations.Successful industrial-scale separation of solids from liquids requires not only a thorough understanding of the principles involved, but also an appreciation of which equipment to use for best effect, and a start-to-finish plan for the various processes involved in the operation. If these factors are all correct, then successful separations should result. - Part of 3-volume set - Unique approach to industrial separations - Internationally-known authors
Download or read book Solid Liquid Separation written by Stephen Tarleton and published by Elsevier. This book was released on 2005-09-26 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid/fluid separation is a major element in the processes performed in pharmaceutical, food, beverage, water, pulp and paper industries. Several books now exist on the more esoteric aspects of the techniques, but accounts of the fundemental principles involved are few. Written by two well-known chemical engineers, this book reviews the scientific and engineering bases for solid/fluid separation processes in an approachable style. Coverage focuses on fluid dynamics, gravity, centrifugal and membrane separations, filter cake formation, de-liquoring and washing. Complete with an extensive bibliography to allow readers to pursue topics in greater depth. - Help readers to understand how filtration processes work - Facilitate the application of knowledge to start-up and existing processes, helping readers to improve process performance - Help ensure your equipment is appropriate for its purpose and is working optimally, saving time and money
Download or read book Filters and Filtration Handbook written by Kenneth S Sutherland and published by Elsevier. This book was released on 2011-04-18 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filters are used in most industries, especially the water, sewage, oil, gas, food and beverage, and pharmaceutical industries. The new edition of this established title is an all-encompassing practical account of standard filtration equipment and its applications. Completely revised and rewritten, it is an essential book for the engineer working in a plant situation-who requires guidance and information on what's available and whether it's suitable for the job. Co-published with the Institution of Chemical Engineers. Co-published with the Institution of Chemical Engineers. - The leading practical engineering guide to filtration techniques, systems and their applications - Meets the needs of all key sectors where filtration is a critical process, including chemical processing and manufacture, food, oil and gas, air-conditioning and water - A comprehensive sourcebook and reference for plant engineers, process engineers, plant designers, filter media and filtration specialists and equipment specifiers
Download or read book Solids and Liquids Separation written by Louise Ferrante and published by CRC Press. This book was released on 1995-05-24 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Separations operations are pervasive in industry today, as well as in many public utilities. The technology and equipment are extensive and diverse. This guide and reference by a leading authority provides a detailed survey of separations technology and equipment in use today. Covered in detail are separation methods and principles, equipment functions and features, and applications. The text is organized for easy reference and well illustrated with diagrammatic representations of equipment design and function. Extensive engineering reference data is provided in tables.
Download or read book Solid liquid Separation written by J. B. Poole and published by . This book was released on 1968 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solid Liquid Filtration written by Barry A. Perlmutter and published by Butterworth-Heinemann. This book was released on 2015-02-06 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Guides in Chemical Engineering are a cluster of short texts that each provides a focused introductory view on a single subject. The full library spans the main topics in the chemical process industries that engineering professionals require a basic understanding of. They are 'pocket publications' that the professional engineer can easily carry with them or access electronically while working. Each text is highly practical and applied, and presents first principles for engineers who need to get up to speed in a new area fast. The focused facts provided in each guide will help you converse with experts in the field, attempt your own initial troubleshooting, check calculations, and solve rudimentary problems. Solid-Liquid Filtration covers the basic principles and mechanisms of filtration, filtration testing including filter aids and filter media, types of filtration systems, selection of filtration systems and typical operating and troubleshooting approaches. This guide also discusses general applications and tips for process filtration and can be utilized by process engineers as a framework for "idea-generation when analyzing filtration for an operating bottleneck issue or a new process development problem. - Practical, short, concise information on the basics will help you get an answer or teach yourself a new topic quickly - Supported by industry examples to help you solve a real world problem - Single subject volumes provide key facts for professionals
Download or read book Liquid Filtration written by Nicholas P Cheremisinoff and published by Butterworth-Heinemann. This book was released on 1998-07-14 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: This state-of-the-art review looks at liquid filtration in the chemical process and allied industries. Interpretations of the phenomenological observations of the hydrodynamics are given, and specific design and selection criteria reviewed.
Download or read book Filters and Filtration Handbook written by T. Christopher Dickenson and published by . This book was released on 1992 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a reference manual for the selection and application of filtration and separation products. The new edition is extended and updated to incorporate all the latest developments in filtration and separation technology supplied by both manufacturers and users. operators, consultants, as well as staff with responsibility for purchasing, planning, sales and marketing. It is directly relevant to numerous industries including water, fluid power, chemicals, pharmaceutical, food and beverages, processing, general engineering, electronics and manufacturing.
Download or read book Sludge Treatment and Disposal written by Cleverson Vitorio Andreoli and published by IWA Publishing. This book was released on 2007-03-30 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sludge Treatment and Disposal is the sixth volume in the series Biological Wastewater Treatment. The book covers in a clear and informative way the sludge characteristics, production, treatment (thickening, dewatering, stabilisation, pathogens removal) and disposal (land application for agricultural purposes, sanitary landfills, landfarming and other methods). Environmental and public health issues are also fully described. About the series: The series is based on a highly acclaimed set of best selling textbooks. This international version is comprised by six textbooks giving a state-of-the-art presentation of the science and technology of biological wastewater treatment. Other titles in the series are: Volume 1: Waste Stabilisation Ponds; Volume 2: Basic Principles of Wastewater Treatment; Volume 3: Waste Stabilization Ponds; Volume 4: Anaerobic Reactors; Volume 5: Activated Sludge and Aerobic Biofilm Reactors
Download or read book Solid Liquid Separation written by Ladislav Svarovsky and published by Elsevier. This book was released on 2000-10-31 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid Liquid Separation includes important industrial processes used for recovery and processing of solids or purification of liquids. Most of the process industries in which particulate slurries are handled use some form of solid-liquid separation and yet the subject is not adequately covered in most higher education courses. This book is designed to bring the readers up-to-date on the principles and industrial practices of solid-liquid separation and washing technology. Particular attention is given to hardware and to its evaluation, application and selection. Whilst not exclusively concerned with filtration and sedimentation, these operations will be dealt with in depth. Important variations in the available equipment will be discussed throughout the book with emphasis on basic engineering concepts, equipment selection and evaluation, solids washing, methods of pre-treatment, filter aids and other practical aspects of mechanical separation. This book is intended for engineers and scientists of graduate status who are engaged in design, production for research and development. This book is designed to bring the readers up-to-date on the principles and industrial practices of solid-liquid separation and washing technology. Particular attention is given to hardware and to its evaluation, application and selection. Whilst not exclusively concerned with filtration and sedimentation, these operations are dealt with in depth. Important variations in the available equipment are discussed throughout the book with emphasis on basic engineering concepts, equipment selection and evaluation, solids washing, methods of pre-treatment, filter aids and other practical aspects of mechanical separation. This book is intended for engineers and scientists of graduate status who are engaged in design, production for research and development. - Author is the top of his field, and knows well all the latest advances in his subject area - Fourth edition of a title which is respected and admired in the world of Chemical Engineering - Updated and revised to match the developments in the industry
Download or read book Progress in Filtration and Separation written by and published by Academic Press. This book was released on 2014-10-14 with total page 703 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in Filtration and Separation contains reference content on fundamentals, core principles, technologies, processes, and applications. It gives detailed coverage of the latest technologies and research, models, applications and standards, practical implementations, case studies, best practice, and process selection. Extensive worked examples are included that cover basic calculations through to process design, including the effects of key variables. Techniques and topics covered include pervaporation, electrodialysis, ion exchange, magnetic (LIMS, HIMS, HGMS), ultrasonic, and more. - Solves the needs of university based researchers and R&D engineers in industry for high-level overviews of sub-topics within the solid-liquid separation field - Provides insight and understanding of new technologies and methods - Combines the expertise of several separations experts
Download or read book Filters and Filtration Handbook written by T. Christopher Dickenson and published by Elsevier. This book was released on 1997 with total page 1084 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following over 3,000 sales of the third edition, the fourth edition of Filters & Filtration Handbook is again destined to become the leading reference manual for filtration and separation products.The handbook is an essential reference tool for engineers, designers technicians, plant operators and consultants as well as staff with responsibility for purchasing, planning, sales and marketing. It is directly relevant to numerous industries including water, fluid power, chemicals, pharmaceutical, food and beverages, processing, general engineering, electronics and manufacturing.
Download or read book Unit Operations in Food Processing written by R. L. Earle and published by Elsevier. This book was released on 2013-10-22 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This long awaited second edition of a popular textbook has a simple and direct approach to the diversity and complexity of food processing. It explains the principles of operations and illustrates them by individual processes. The new edition has been enlarged to include sections on freezing, drying, psychrometry, and a completely new section on mechanical refrigeration. All the units have been converted to SI measure. Each chapter contains unworked examples to help the student gain a grasp of the subject, and although primarily intended for the student food technologist or process engineer, this book will also be useful to technical workers in the food industry
Download or read book Challenges in Fine Coal Processing Dewatering and Disposal written by Mark S. Klima and published by SME. This book was released on 2012 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal mining and preparation have had a long history in the United States and the world, serving as the engine of growth for many industries. Today, new sources of energy, increased environmental awareness, and more stringent regulations from the U.S. Environmental Protection Agency and other organizations are changing the way coal is found, extracted, and used. As a result, fine coal cleaning, dewatering, and refuse disposal are now at a major crossroads. The increased level of fines, and near-density material in the inferior seams being mined today, necessitates the development of more efficient fine coal cleaning devices. This in turn requires improvements in traditional dewatering techniques to address the need for acceptable moisture levels in plant products. Moreover, the larger volume of fine refuse being generated, coupled with harsher disposal regulations, requires upgraded treatment options. This book is a compilation of information presented at the 2012 Fine Coal Symposium, sponsored by the Coal Preparation Society of America; the Pittsburgh Section of the Society for Mining, Metallurgy, and Exploration, Inc.; and the Pittsburgh Coal Mining Institute of America. Provided by international coal companies, major research organizations, technology developers, and industry leaders, the information includes both general knowledge and in-depth discussion on the current challenges facing the industry, techniques for designing more efficient plants, and new cleaning and dewatering technologies. The book is a practical yet cutting-edge resource for plant designers, engineers, and other practitioners, and for university students and faculty.
Download or read book Handbook of Batch Process Design written by P.N. Sharratt and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: Batch processes are used to manufacture many fine organic chemicals, and as such they can be considered to underpin much of the modern chemical industry. Despite widespread use and a consequent huge contribution to wealth creation, batch processes have attracted limited attention outside the user industries. Batch chemicals processing uses a number of core techniques and technologies, such as scheduling and sequence control, agitation and batch filtration. The combination of these technologies with often complex chemistry, the multi-purpose nature of much of this type of plant, the distinctive safety and environmental issues, and a fast moving commercial environment makes the development of a successful batch process a considerable challenge for the chemist or engineer. The literature on the topics covered in this book is fragmented and often not easily accessible, so this handbook has been written to address this problem and to bring together design and process analysis methods in the core areas of batch process design. By combining the science and pragmatism required in the development of successful batch processes this new book provides answers to real problems in an accessible and concise way. Written by an international team of authors drawn from industry, consulting and academe, this book is an essential part of the library of any chemist, technologist or engineer working on the development of new or existing batch processes.
