Download or read book Filamentary A15 Superconductors written by Masaki Suenaga and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compound superconductors with the Al5 structure carry the promise of the second generation in practical superconductivity. They will provide higher operating magnetic fields at higher tem peratures than the preceding alloy superconductors. To fulfill this promise, their brittle nature must be accommodated in a fila mentary structure. Achieving this has been no simple task and imaginative research and clever production techniques have led to many usable conductor configurations. In addition, several new and exciting possibilities are being proposed; for example, in situ processing promises easier production with improved strain toler ance. It is timely, therefore, to take measure of what we have achieved and to assess our understanding so that we may choose, with some confidence, paths for future research and potential ap plications. To meet these needs, the International Cryogenic Materials Conference Board has sponsored this special topic conference on Filamentary Al5 Superconductors bringing together superconductiv ity researchers, superconducting wire producers, and high field magnet users to discuss current research problems. That the in formation exchange was intensive and successful is evidenced by the excellent papers in this volume. In order to capture some of the synergistic wisdom generated in discussions at the conference several people were asked to assemble and interpret the comments and concerns of the fusion, high energy physics, solid state phys ics, and metallurgy groups.

Download or read book Filamentary A15 Superconductors written by Masaki Suenaga and published by . This book was released on 1966-01-01 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Filamentary A15 Superconductors written by Masaki Suenaga and published by Springer. This book was released on 1980-12-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compound superconductors with the Al5 structure carry the promise of the second generation in practical superconductivity. They will provide higher operating magnetic fields at higher tem peratures than the preceding alloy superconductors. To fulfill this promise, their brittle nature must be accommodated in a fila mentary structure. Achieving this has been no simple task and imaginative research and clever production techniques have led to many usable conductor configurations. In addition, several new and exciting possibilities are being proposed; for example, in situ processing promises easier production with improved strain toler ance. It is timely, therefore, to take measure of what we have achieved and to assess our understanding so that we may choose, with some confidence, paths for future research and potential ap plications. To meet these needs, the International Cryogenic Materials Conference Board has sponsored this special topic conference on Filamentary Al5 Superconductors bringing together superconductiv ity researchers, superconducting wire producers, and high field magnet users to discuss current research problems. That the in formation exchange was intensive and successful is evidenced by the excellent papers in this volume. In order to capture some of the synergistic wisdom generated in discussions at the conference several people were asked to assemble and interpret the comments and concerns of the fusion, high energy physics, solid state phys ics, and metallurgy groups.

Download or read book Metallurgy of Continuous Filamentary A15 Superconductors written by and published by . This book was released on 1980 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The early history of the bronze process is recapitulated and modifications to the process which have since followed are described. The metallurgical principles, which are involved in the process, are described including the kinetics of the compound growth, the effects of additives on the growth, etc. The superconducting properties of these compounds are also discussed. The influence of metallurgical variables on the superconducting properties is discussed in detail. In discussing the superconducting current densities in these compounds, limits in applicability of existing magnetic-flux-pinning models are also treated as well as methods for determining critical magnetic fields.

Download or read book A15 Multifilamentary Superconductors by the Infiltration Process written by and published by . This book was released on 1980 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The inherent brittleness of the A15 compounds, and the requirement for a filamentary morphology, led to a heavy reliance on a powder approach for the preparation of superconducting tapes and wires. The quench-age technique, a non-powder process, was employed for the niobium-aluminum system, following the special features of the equilibrium phase diagram. The powder approach proved particularly effective for binaries, such as Nb-Sn, and for the ternaries Nb(Al, Ge) and Nb(Al, Si). Two variations of the powder process were assessed. One involved the use of precompounded powder of the desired stoichiometry but required simultaneous application of heat and pressure. The second variation was the infiltration process. This process involves the preparation of a ductile niobium matrix containing a controlled network of interconnected pores which are subsequently infiltrated with liquid metals (Sn) or low melting-point eutectics (e.g., Al-Ge, Al-Si). The composite is then subjected to a thermomechanical treatment to form a multiply connected array of A15 filaments in a niobium matrix. Multifilamentary conductors, based on Nb3Sn, Nb3Al, Nb3 (Al, Ge) and Nb3 (Al, Si), were readily obtained. Nb3Sn conductors made by the infiltration process exhibit a critical temperature (Tc) of 18.1 K and a critical current carrying capacity (I/sub c/) of 8 x 104 amp.cm−2 at 12 Tesla.

Download or read book Handbook of Superconducting Materials written by David A. Cardwell and published by CRC Press. This book was released on 2003 with total page 1120 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the advent of High Temperature Superconductivity and the increasing reliability of fabrication techniques, superconductor technology has moved firmly into the mainstream of academic and industrial research. There is currently no single source of practical information giving guidance on which technique to use for any particular category of superconductor. An increasing number of materials scientists and electrical engineers require easy access to practical information, sensible advice and guidance on 'best-practice' and reliable, proven fabrication and characterisation techniques.The Handbook will be the definitive collection of material describing techniques for the fabrication and analysis of superconducting materials. In addition to the descriptions of techniques, authoritative discussions written by leading researchers will give guidance on the most appropriate technique for a particular situation.Characterisation and measurement techniques will form an important part of the Handbook, providing researchers with a standard reference for experimental techniques. The tutorial style description of these techniques makes the Handbook particularly suitable for use by graduate students.The Handbook will be supported by a comprehensive web site which will be updated with new data as it emerges.The Handbook has six main sections: -- Fundamentals of Superconductivity - characteristic properties, elementary theory, critical current of type II superconductors-- Processing - bulk materials, wires and tapes, thick and think films, contact techniques-- Characterisation Techniques - structure/microstructure, measurement and interpretation of electromagnetic properties,measurement of physics properties-- Materials - characteristic properties of low and high Tc materials-- Applications - high current applications, trapped flux devices, high frequency devices, josephson junction devic

Download or read book Design and Fabrication of Conventional and Unconventional Superconductors written by E. W. Collings and published by William Andrew. This book was released on 1984 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Studies of the Strain dependent Properties of A15 Filamentary Conductors at Brookhaven National Laboratory written by and published by . This book was released on 1980 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Work at BNL pertaining to the strain response of filamentary bronze-processed superconductors is reviewed. This work includes the intrinsic strain dependence of the critical properties of A15 structure compounds, the nature of the initial internal strain state of composite conductors, and the interplay between these residual strains and applied strains which governs the response of the conductor to external strain. Some factors which can enhance the strain tolerances of filamentary conductors are briefly discussed. (GHT).

Download or read book Superconductor Materials Science Metallurgy Fabrication and Applications written by Simon Foner and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 989 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book encompasses the science, measurement, fabrica tion, and use of superconducting materials in large scale and small scale technologies. The present book is in some sense a continuation and completion of a series of two earlier books based on NA TO Advanced Study Institutes held over the last decade. The first book in the series entitled Superconducting Machines ~nd Devices: Large Systems Appli cations edited by S. Foner and B. B. Schwartz (1974) represented a compilation of all the applications of superconducting technology. The second book entitled Superconductor Applications: Squids and Machines, edited by B. B. Schwartz and S. Foner (1977) reviewed small scale applications and up-dated the large scale applications of superconductiv ity at that time. These two books are both introductions and advanced reference volumes for almost all aspects of the applications of super conductivity. The growth of applied superconductivity has mushroomed in the decade of the 1970's. Technologies which were discussed in the beginning of the 1970's are now beyond the prototype stage. Materials development and performance in operating systems is the basis of the continued applications and economic viability of super conducting technology. In this book, a complete review of all materials technology is presented by leading authorities who were instrumental in the development of superconducting materials technology. The present book is based on the NATO Advanced Study vi PREFACE Institute entitled Superconducting Materials: Science and Technology which was held from August 20 to August 30, 1980 in Sintra, Portugal.

Download or read book Composite Superconductors written by K. Osamura and published by Routledge. This book was released on 2018-02-19 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference examines the tremendous benefits produced by the use of superconductivity, including the realization of a commercial fusion reactor for the generation of electricity. Providing a comprehensive coverage of superconductivity and magnet design - incorporating background information for beginners as well as research advances for specialists - this work: discusses the historical development of superconductivity and its engineering applications; explains the mechanical properties of the metal matrix composite; describes the important electromagnetic factors for the design of composite superconductors; analyzes the fabrication and optimization of various composite superconductors; and assesses the future development of high Tc oxide superconductors for engineering applicaitons.;This title is intended for: physicists; metallurgists; materials scientists; materials, electrical, mechanical, cryogenic and medical engineers; and graduate students in these disciplines.

Download or read book Advances in Cryogenic Engineering Materials written by R.W. Fast and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 904 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fourth International Cryogenic Materials Conference (ICMC) was held in San Diego, California in conjunction with the Cryogenic Engineer ing Conference (CEC) on August 10-l4, 1981. The synergism produced by conducting the two conferences together remains very strong. In the ap pl1cation of cryogenic technology, materials continue to be a demanding challenge, and sometimes, an obstacle. The association of materials and cryogenic engineers increases their awareness of recent research in each other's fields and influences the course of future research. Many contributed to the success of the 1981 conference. J. W. Morris of the University of California--Berkeley was ICMC Conference Chairman. E. N. C. Dalder of Lawrence Livermore Laboratories was ICMC Structural Program Chairman; D. C. Larbalestier of the University of Wisconsin- Madison, and D. K. Finnemore of Iowa State University were Superconducting Materials Program Chairmen. Local arrangments were expertly coordinated by R. E. Tatro of General Dynamics--San Diego. The CEC Board, especia11y their conference chairman, T. M. Flynn, of the National Bureau of Stan dards, Boulder, contributed very substantia1ly to conference planning and implementation. All of their efforts provided the foundation of the largest CEC/ICMC ever. We thank the Office of Naval Research and the Office of Fusion Energy and Basic Energy Sciences of the Department of Energy for providing needed financial support for the conference. Fina11y, we especially thank M. Stieg, who prepared the papers for the new procedures and format used in this volume.

Download or read book Experimental Techniques for Low Temperature Measurements written by Jack Ekin and published by Oxford University Press. This book was released on 2006-10-12 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher description

Download or read book Applied Superconductivity written by Paul Seidel and published by John Wiley & Sons. This book was released on 2015-01-22 with total page 1336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This wide-ranging presentation of applied superconductivity, from fundamentals and materials right up to the details of many applications, is an essential reference for physicists and engineers in academic research as well as in industry. Readers looking for a comprehensive overview on basic effects related to superconductivity and superconducting materials will expand their knowledge and understanding of both low and high Tc superconductors with respect to their application. Technology, preparation and characterization are covered for bulk, single crystals, thins fi lms as well as electronic devices, wires and tapes. The main benefit of this work lies in its broad coverage of significant applications in magnets, power engineering, electronics, sensors and quantum metrology. The reader will find information on superconducting magnets for diverse applications like particle physics, fusion research, medicine, and biomagnetism as well as materials processing. SQUIDs and their usage in medicine or geophysics are thoroughly covered, as are superconducting radiation and particle detectors, aspects on superconductor digital electronics, leading readers to quantum computing and new devices.

Download or read book Advances in Cryogenic Engineering Materials written by A. F. Clark and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Third International Cryogenic Materials Conference (ICMC) was held in Madison, Wisconsin, in conjunction with the Cryogenic Engineering Conference (CEC) in August 1979. The University of Wisconsin hosted the two conferences in an excellent manner and deserves special recognition and praise. The synergism produced by conducting the two conferences simultaneously continues to be strong. Materials remain a demanding challenge and, in some cases, an obstacle to effective application of cryogenic technology. The association of materials specialists and cryogenic engineers every other year centers their attention on the most needed areas of research. The present ICMC Board met during the conference and elected two new members, E. W. Collings (U. S.) and D. Evans (England). The board voted to conduct two smaller, special-topic conferences in 1980. These are Filamentary A15 Superconductors, which was held at Brookhaven National Laboratories, Upton, New York in May 1980, and Fundamentals of Nonmetallics and Composites at Low Temperatures, held in Geneva, Switzerland in August 1980. The 1981 CEC/ICMC will be held August 10 through 14 in San Diego, California.

Download or read book Composite Materials written by Krishan K. Cha and published by Springer Science & Business Media. This book was released on 2013-05-03 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of Krishan Chawla's widely used textbook, Composite Materials, offers integrated and completely up-to-date coverage of composite materials. The book focuses on the triad of processing, structure, and properties, while providing a well-balanced treatment of the materials science and mechanics of composites. In this edition of Composite Materials, revised and updated throughout, increasing use of composites in industry (especially aerospace and energy) and new developments in the field are highlighted. There is a new chapter on non-conventional composites, which covers polymer, metal and ceramic matrix nanocomposites, self-healing composites, self-reinforced composites, biocomposites and laminates made of metals and polymer matrix composites. The third edition, featuring all figures in color, also includes new solved examples and problems as well as increased coverage of: Carbon/carbon brakes. Composites for civilian aircraft and jet engines. Second generation high-temperature superconducting composites. Composites for use in windmill blades. WC/metal particulate composites. Examples of practical applications in various fields are given throughout the book, and extensive references to the literature are provided. The book is intended for use in graduate and upper-division undergraduate courses, and as a reference for the practicing engineers and researchers in industry and academia.

Download or read book Composite Materials written by Krishan K. Chawla and published by Springer Nature. This book was released on 2019-12-17 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fourth edition of Krishan Chawla's widely used textbook, Composite Materials, offers integrated and completely up-to-date coverage of composite materials. The book focuses on the triad of processing, structure, and properties, while providing a well-balanced treatment of the materials science and mechanics of composites. In this edition of Composite Materials, revised and updated throughout, increasing use of composites in industry (especially aerospace and energy) and new developments in the field are highlighted. New material on the advances in non-conventional composites (which covers polymer, metal and ceramic matrix nanocomposites), self-healing composites, self-reinforced composites, biocomposites and laminates made of metals and polymer matrix composites is included. Examples of practical applications in various fields are provided throughout the book, with extensive references to the literature. The book is intended for use in graduate and upper-division undergraduate courses and as a reference for the practicing engineers and researchers in industry and academia.

Download or read book European Training On Technologies And Industrial Applications Of Superconductivity Proceedings Of The Ettias 1st School written by Antonio Morini and published by World Scientific. This book was released on 1992-09-25 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Our understanding of the physical world was revolutionized in the twentieth century — the era of “modern physics”. The book Introduction to Modern Physics: Theoretical Foundations, aimed at the very best students, presents the foundations and frontiers of today's physics. Typically, students have to wade through several courses to see many of these topics. The goal is to give them some idea of where they are going, and how things fit together, as they go along. The book focuses on the following topics: quantum mechanics; applications in atomic, nuclear, particle, and condensed-matter physics; special relativity; relativistic quantum mechanics, including the Dirac equation and Feynman diagrams; quantum fields; and general relativity. The aim is to cover these topics in sufficient depth that things “make sense” to students, and they achieve an elementary working knowledge of them. The book assumes a one-year, calculus-based freshman physics course, along with a one-year course in calculus. Several appendices bring the reader up to speed on any additional required mathematics. Many problems are included, a great number of which take dedicated readers just as far as they want to go in modern physics. The present book provides solutions to the over 175 problems in Introduction to Modern Physics: Theoretical Foundations in what we believe to be a clear and concise fashion.