Download or read book Fifty Years of Progress for Shell and Spatial Structures written by Ihsan Munghan and published by Anchor Books. This book was released on 2011 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of CEE 2023 written by Zinoviy Blikharskyy and published by Springer Nature. This book was released on 2023-10-25 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the latest advances, innovations, and applications in the field of effective methods of calculation, resource-saving technologies, and advanced materials in civil and environmental engineering, as presented by leading international researchers and engineers at the XVIII International Scientific Conference Current Issues of Civil and Environmental Engineering “Lviv- Košice – Rzeszów”, held in Rzeszów, Poland, on September 6–8, 2023. It covers highly diverse topics, including structural shaping and optimization; aspects of structural behavior and modeling; advanced analysis methods; experimental tests and numerical simulations; design codes, in particular Eurocodes and other national and regional limit state codes; and highway and bridges engineering. It also discusses modern architectural and structural solutions; innovative materials and products; durability and maintenance; fabrication and erection; sustainability in construction; renewable energy sources; heat, gas, and water supply; ventilation and air-conditioning; ecological and energy-saving technologies, modern water purification, and treatment technologies; and the protection of water ecosystems. This book, which was selected by means of a rigorous international peer-review process, highlights numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaborations.
Download or read book Sculpture on a Grand Scale written by Tyler Sprague and published by University of Washington Press. This book was released on 2019-07-22 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Kingdome, John (“Jack”) Christiansen’s best-known work, was the largest freestanding concrete dome in the world. Built amid public controversy, the multipurpose arena was designed to stand for a thousand years but was demolished in a great cloud of dust after less than a quarter century. Many know the fate of Seattle’s iconic dome, but fewer are familiar with its innovative structural engineer, Jack Christensen (1927–2017), and his significant contribution to Pacific Northwest and modernist architecture. Christiansen designed more than a hundred projects in the region: public schools and gymnasiums, sculptural church spaces, many of the Seattle Center’s 1962 World’s Fair buildings, and the Museum of Flight’s vast glass roof all reflect his expressive ideas. Inspired by Northwest topography and drawn to the region’s mountains and profound natural landscapes, Christiansen employed hyperbolic paraboloid forms, barrel-vault structures, and efficient modular construction to echo and complement the forms he loved in nature. Notably, he became an enthusiastic proponent of using thin shell concrete—the Kingdome being the most prominent example—to create inexpensive, utilitarian space on a large scale. Tyler Sprague places Christiansen within a global cohort of thin shell engineer-designers, exploring the use of a remarkable structural medium known for its minimal use of material, architectually expressive forms, and long-span capability. Examining Christiansen’s creative design and engineering work, Sprague, who interviewed Christiansen extensively, illuminates his legacy of graceful, distinctive concrete architectural forms, highlighting their lasting imprint on the region’s built environment. A Michael J. Repass Book
Download or read book Shell Structures for Architecture written by Sigrid Adriaenssens and published by Routledge. This book was released on 2014-03-21 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: *** Featuring a foreword by Pritzker Prize Winner Shigeru Ban *** Bringing together experts from research and practice, Shell Structures for Architecture: Form Finding and Optimization presents contemporary design methods for shell and gridshell structures, covering form-finding and structural optimization techniques. It introduces architecture and engineering practitioners and students to structural shells and provides computational techniques to develop complex curved structural surfaces, in the form of mathematics, computer algorithms, and design case studies. • Part I introduces the topic of shells, tracing the ancient relationship between structural form and forces, the basics of shell behaviour, and the evolution of form-finding and structural optimization techniques. • Part II familiarizes the reader with form-finding techniques to explore expressive structural geometries, covering the force density method, thrust network analysis, dynamic relaxation and particle-spring systems. • Part III focuses on shell shape and topology optimization, and provides a deeper understanding of gradient-based methods and meta-heuristic techniques. • Part IV contains precedent studies of realised shells and gridshells describing their innovative design and construction methods.
Download or read book Advances in Engineering Materials Structures and Systems Innovations Mechanics and Applications written by Alphose Zingoni and published by CRC Press. This book was released on 2019-08-21 with total page 2435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications comprises 411 papers that were presented at SEMC 2019, the Seventh International Conference on Structural Engineering, Mechanics and Computation, held in Cape Town, South Africa, from 2 to 4 September 2019. The subject matter reflects the broad scope of SEMC conferences, and covers a wide variety of engineering materials (both traditional and innovative) and many types of structures. The many topics featured in these Proceedings can be classified into six broad categories that deal with: (i) the mechanics of materials and fluids (elasticity, plasticity, flow through porous media, fluid dynamics, fracture, fatigue, damage, delamination, corrosion, bond, creep, shrinkage, etc); (ii) the mechanics of structures and systems (structural dynamics, vibration, seismic response, soil-structure interaction, fluid-structure interaction, response to blast and impact, response to fire, structural stability, buckling, collapse behaviour); (iii) the numerical modelling and experimental testing of materials and structures (numerical methods, simulation techniques, multi-scale modelling, computational modelling, laboratory testing, field testing, experimental measurements); (iv) innovations and special structures (nanostructures, adaptive structures, smart structures, composite structures, bio-inspired structures, shell structures, membranes, space structures, lightweight structures, long-span structures, tall buildings, wind turbines, etc); (v) design in traditional engineering materials (steel, concrete, steel-concrete composite, aluminium, masonry, timber, glass); (vi) the process of structural engineering (conceptualisation, planning, analysis, design, optimization, construction, assembly, manufacture, testing, maintenance, monitoring, assessment, repair, strengthening, retrofitting, decommissioning). The SEMC 2019 Proceedings will be of interest to civil, structural, mechanical, marine and aerospace engineers. Researchers, developers, practitioners and academics in these disciplines will find them useful. Two versions of the papers are available. Short versions, intended to be concise but self-contained summaries of the full papers, are in this printed book. The full versions of the papers are in the e-book.
Download or read book Reconstruction and Restoration of Architectural Heritage 2021 written by Sergey Sementsov and published by CRC Press. This book was released on 2021-07-27 with total page 811 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reconstruction and Restoration of Architectural Heritage 2021 presents contributions on various aspects of the study, protection and restoration of architectural monuments and on the reconstruction of major historical urban development sites. Moreover, various complex and problematic aspects of engineering reconstruction of monuments are discussed. A wide range of issues is considered in the process of preserving historical heritage, including: the historical formation of buildings, construction and territories; the conservation, reconstruction and restoration of buildings and constructions; the transformation of historical spaces and areas. parallels and features in the development of urban planning, architecture and construction art in Russia and Spain the fate and work of Augustine Augustinovich Betancourt This collection of papers combines contributions about the history and restoration of many of the largest nature reserves, estates, cities and monuments. It is intended for academics and professionals involved in the history and restoration of nature reserves, estates, cities and monuments.
Download or read book Responsive Architecture written by Dusan Katunsky and published by MDPI. This book was released on 2019-11-20 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of articles that have been published in the Special Issue “Responsive Architecture” of the MDPI journal Buildings. The eleven articles within cover various areas of sensitive architecture, including the design of packaging structures reacting to supporting components; structural efficiency of bent columns in indigenous houses; roof forms responsive to buildings depending on their resiliently transformed steel shell parts; creative design of building free shapes covered with transformed shells; artistic structural concepts of the architect and civil engineer; digitally designed airport terminal using wind analysis; rationalized shaping of sensitive curvilinear steel construction; interactive stories of responsive architecture; transformed shell roof constructions as the main determinant in the creative shaping of buildings without shapes that are sensitive to man-made and natural environments; thermally sensitive performances of a special shielding envelope on balconies; quantification of generality and adaptability of building layout using the SAGA method; and influence of initial conditions on the simulation of the transient temperature field inside a wall.
Download or read book 10 Years of Progress in Shell and Spatial Structures Shells written by and published by . This book was released on 1989 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Representation written by Andrea Giordano and published by Springer Nature. This book was released on with total page 951 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Developments in Anisotropic Heterogeneous Shell Theory written by Alexander Ya. Grigorenko and published by Springer. This book was released on 2015-12-30 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on the relevant general theory and presents some first applications, namely those based on classical shell theory. After a brief introduction, during which the history and state-of-the-art are discussed, the first chapter presents the mechanics of anisotropic heterogeneous shells, covering all relevant assumptions and the basic relations of 3D elasticity, classical and refined shell models. The second chapter examines the numerical techniques that are used, namely discrete orthogonalization, spline-collocation and Fourier series, while the third highlights applications based on classical theory, in particular, the stress-strain state of shallow shells, non-circular shells, shells of revolution, and free vibrations of conical shells. The book concludes with a summary and an outlook bridging the gap to the second volume.
Download or read book 10 Years of Progress in Shell and Spatial Structures Membranes written by and published by . This book was released on 1989 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Designing with the Wind written by Lenka Kabošová and published by Springer Nature. This book was released on 2023-03-23 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores wind-adaptive architectural design blending the parametric design with digital simulations and suggests a novel approach for specific, even extreme conditions, as the first step in creating architecture that can act in response to the nature around. The chapters propose an urban and architectural design that emerges from the specific wind microclimate of the design site and responds to the changes in the ambient wind conditions. The book looks closely at A) the interdisciplinary wind-driven design method for architects, engineers, and urbanists employing open-source software for CFD analysis and B) the tensegrity-membrane adaptive building façades. The main questions the authors try to answer are: How does the wind-driven methodology enhance the wind comfort around buildings? How can it contribute to the reduction of wind surface loads acting on buildings?
Download or read book Conceptual Design of Structures written by Pierluigi D'Acunto and published by Birkhäuser. This book was released on 2024-04-22 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most of the embodied energy can be saved in the load-bearing structure! Conceptual Design of Structures is working at the interface between structural engineering, architecture, and art. The book seeks to answer the complex question of what needs to be considered when conceiving a building structure. What influences the process of conceptual thinking? How do space and structure interact? In what ways do architects and engineers work together? The book thus sheds light on the topic of multidisciplinary interrelationships in design, showing numerous different perspectives. Renowned practitioners and researchers from architecture and engineering share their insights, as do artists and historians who cross the disciplinary boundaries. Furthermore, this book also provides an outlook on possible future developments and aspects of sustainable design and construction. Bridging practice, academic, and research Holistic perspectives through contributors from different disciplines Numerous essays, interviews and project reviews provide direct insights Selected works from engineering, architecture, and art
Download or read book The History of the Theory of Structures written by Karl-Eugen Kurrer and published by John Wiley & Sons. This book was released on 2018-06-19 with total page 1248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Zehn Jahre nach der 1. Auflage in englischer Sprache legt der Autor sein Buch The History of the Theory of Structures in wesentlich erweiterter Form vor, nunmehr mit dem Untertitel Searching for Equilibrium. Mit dem vorliegenden Buch lädt der Verfasser seine Leser zur Suche nach dem Gleichgewicht von Tragwerken auf Zeitreisen ein. Die Zeitreisen setzen mit der Entstehung der Statik und Festigkeitslehre eines Leonardo und Galilei ein und erreichen ihren ersten Höhepunkt mit den baustatischen Theorien über den Balken, Erddruck und das Gewölbe von Coulomb am Ende des 18. Jahrhunderts. Im folgenden Jahrhundert formiert sich die Baustatik mit Navier, Culmann, Maxwell, Rankine, Mohr, Castigliano und Müller-Breslau zu einer technikwissenschaftlichen Grundlagendisziplin, die im 20. Jahrhundert in Gestalt der modernen Strukturmechanik bei der Herausbildung der konstruktiven Sprache des Stahl-, Stahlbeton-, Flugzeug-, Automobil- und des Schiffbaus eine tragende Rolle spielt. Dabei setzt der Autor den inhaltlichen Schwerpunkt auf die Formierung und Entwicklung moderner numerischer Ingenieurmethoden wie der Finite-Elemente-Methode und beschreibt ihre disziplinäre Integration in der Computational Mechanics. Kurze, durch historische Skizzen unterstützte Einblicke in gängige Berechnungsverfahren erleichtern den Zugang zur Geschichte der Strukturmechanik und Erddrucktheorie vom heutigen Stand der Ingenieurpraxis und stellen einen auch einen wichtigen Beitrag zur Ingenieurpädagogik dar. Dem Autor gelingt es, die Unterschiedlichkeit der Akteure hinsichtlich ihres technisch-wissenschaftlichen Profils und ihrer Persönlichkeit plastisch zu schildern und das Verständnis für den gesellschaftlichen Kontext zu erzeugen. So werden in 260 Kurzbiografien die subjektive Dimension der Baustatik und der Strukturmechanik von der frühen Neuzeit bis heute entfaltet. Dabei werden die wesentlichen Beiträge der Protagonisten der Baustatik besprochen und in die nachfolgende Bibliografie integriert. Berücksichtigt wurden nicht nur Bauingenieure und Architekten, sondern auch Mathematiker, Physiker, Maschinenbauer sowie Flugzeug- und Schiffbauer. Neben den bekannten Persönlichkeiten der Baustatik, wie Coulomb, Culmann, Maxwell, Mohr, Müller-Breslau, Navier, Rankine, Saint-Venant, Timoshenko und Westergaard, wurden u. a. auch G. Green, A. N. Krylov, G. Li, A. J. S. Pippard, W. Prager, H. A. Schade, A. W. Skempton, C. A. Truesdell, J. A. L. Waddell und H. Wagner berücksichtigt. Den Wegbereitern der Moderne in der Baustatik J. H. Argyris, R. W. Clough, Th. v. Kármán, M. J. Turner und O. C. Zienkiewicz wurden umfangreiche Biografien gewidmet. Eine ca. 4500 Titel umfassende Bibliografie rundet das Werk ab. Neue Inhalte der 2. Auflage sind: Erddrucktheorie, Traglastverfahren, historische Lehrbuchanalyse, Stahlbrückenbau, Leichtbau, Platten- und Schalentheorie, Greensche Funktion, Computerstatik, FEM, Computergestützte Graphostatik und Historische Technikwissenschaft. Gegenüber der 1., englischen Ausgabe wurde der Seitenumfang um 50 % auf nunmehr etwas über 1200 Druckseiten gesteigert. Das vorliegende Buch ist die erste zusammenfassende historische Gesamtdarstellung der Baustatik vom 16. Jahrhundert bis heute. Über die Reihe edition Bautechnikgeschichte: Mit erstaunlicher Dynamik hat sich die Bautechnikgeschichte in den vergangenen Jahrzehnten zu einer höchst lebendigen, international vernetzten und viel beachteten eigenständigen Disziplin entwickelt. Auch wenn die nationalen Forschungszugänge unterschiedliche Akzente setzen, eint sie doch das Bewusstsein, dass gerade die inhaltliche und methodische Vielfalt und das damit verbundene synthetische Potenzial die Stärke des neuen Forschungsfeldes ausmachen. Bautechnikgeschichte erschließt neue Formen des Verstehens von Bauen zwischen Ingenieurwesen und Architektur, zwischen Bau- und Kunst-, Technik- und Wissenschaftsgeschichte. Mit der edition Bautechnikgeschichte erhält die neue Disziplin erstmals einen Ort für die Publikation wichtiger Arbeiten auf angemessenem Niveau in hochwertiger Gestaltung. Die Bücher erscheinen in deutscher oder englischer Sprache. Beide Hauptrichtungen der Bautechnikgeschichte, der eher konstruktionsgeschichtlich und der eher theoriegeschichtlich geleitete Zugang, finden Berücksichtigung; das Spektrum der Bände reicht von Überblickswerken über Monographien zu Einzelaspekten oder -bauten bis hin zu Biographien bedeutender Ingenieurpersönlichkeiten. Ein international besetzter Wissenschaftlicher Beirat unterstützt die Herausgeber in der Umsetzung des Konzepts.
Download or read book 10 Years of Progress in Shell and Spatial Structures Numerical methods written by and published by . This book was released on 1989 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Shell and Spatial Structures written by Stefano Gabriele and published by Springer Nature. This book was released on 2023-12-04 with total page 931 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume collects the latest advances, innovations, and applications in the field of shell and spatial structures, as presented by leading international researchers at the 2nd Italian Workshop on Shell and Spatial Structures (IWSS), held in Turin, Italy on June 26-28, 2023. The conference was meant to give an overview on experimental and theoretical studies, analysis methods and approaches for the design, computational form finding, structural optimization, manufacturing, testing and maintenance techniques and historical reviews of all types of shell and spatial structures. These include, but are not limited to, tension and membrane structures, framed and lattice structures, gridshells and active-bending structures, shell roofs, tensegrity structures, pneumatic and inflatable structures, active and deployable structures, concrete, metal, masonry, timber and bio-based, spatial structures. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.
Download or read book Everything Moves written by Susan Lowell de Solórzano and published by Jessica Kingsley Publishers. This book was released on 2020-10-09 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'What a multi-sensory pleasure in learning! I will be a better teacher and better clinician using what I am learning from this book.' Carol M Davis DPT, EdD, MS, FAPTA The emerging science of biotensegrity provides a fresh context for re-thinking our understanding of human movement, but its complexities can be formidable. Bodywork and movement professionals looking for an accessible and relevant guide to the concept and application of biotensegrity need look no further than Everything Moves: How biotensegrity informs human movement. In order to work with our own bodies and the bodies of our students, clients and teams most effectively, we need to understand the nature of our human structure. Everything Moves offers the enquiring bodyworker or movement professional, who wants to take their understanding of how to apply biotensegrity in their work to the next level, a practical and relatable guide to the biotensegral nature of our bodies, in which all of the parts are one, yet all are constantly changing. Throughout Everything Moves, concepts and ideas are presented with activities and exercises to make them tangible, accessible and applicable. The material presented is suitable for coaches and movement teachers new to biotensegrity, as well as those with more advanced levels of understanding. Whether your focus is performance, sports, Alexander Technique, Feldenkrais, yoga, Pilates, martial arts, or dance, any arena in which bodies move can be informed by Everything Moves!
