Download or read book FIDIC A Guide for Practitioners written by Axel-Volkmar Jaeger and published by Springer Science & Business Media. This book was released on 2009-11-11 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1999, a suite of three new conditions of contract was published by FIDIC, following the basic structure and wording harmonised and updated around the previous FIDIC Design-Build and Turnkey Contract (the 1992 ‘‘Orange Book’’). These conditions, known as the ‘‘FIDIC rainbow, were the Conditions of C- tract for: l Construction, the so-called Red Book, for works designed by the Employer l Plant and Design-Build, the so-called Yellow Book, for works designed by the Contractor l EPC/Turnkey Projects, the so-called Silver Book, for works designed by the Contractor The ?rst is intended for construction works where the Employer is responsible for the design, as for per the previous so-called Red Book 4th Edition (1987), with an important role for the Engineer. The other two conditions of contract are intended for situations when the Contractor is responsible for the design. The Plant and Design-Build Contract has the traditional Engineer while the EPC/Turnkey Contract has a two-party arran- ment, generally with an Employer’s Representative as one of the parties.
Download or read book Understanding FIDIC written by Kelvin Hughes and published by Routledge. This book was released on 2020-12-20 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding FIDIC explains in simple and practical terms what is often seen as a very complex range of international engineering and construction contracts. Covering the FIDIC 2017 Red, Yellow and Silver Books (referred to as "The Rainbow Suite"), the book gives an overview of all three contracts, including coverage of changes between the 1999 contracts and the present 2017 suite. FIDIC contracts are widely used as far afield as Europe, the Middle East, Asia and Australia, and this book provides a practical yet thorough guide to the key elements that practitioners preparing and administering these contracts would need to be aware of. In his approachable and readable style, Kelvin Hughes covers: The obligations and responsibilities of the Employer, the Employer’s Representative, the Engineer and the Contractor Quality and Defects Liability Design Responsibility and Liability Variations, Measurement and Payment Procedures Progress, Delays, Extensions of Time and Completion Suspension and Termination Insurances Employer’s and Contractor’s Claims The Dispute Avoidance/Adjudication Board and the Resolution of Disputes Tendering Anyone working with FIDIC contracts whether as the Employer, Employer’s Representative, Engineer or Contractor will benefit greatly from this easy-to-read guide to the Rainbow Suite. Students on professional courses or researching the contracts for project work will also find this book extremely useful.
Download or read book International Construction Contract Law written by Lukas Klee and published by John Wiley & Sons. This book was released on 2015-01-07 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Aimed at a global market so not oriented to any particular legal system, the book is useful to readers throughout the world"--
Download or read book An Employer s and Engineer s Guide to the FIDIC Conditions of Contract written by Michael D. Robinson and published by John Wiley & Sons. This book was released on 2013-04-22 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: When all parties involved in the construction process fully understand their roles and are able to anticipate potential points of conflict, disputes and delays will be minimised. The Employer’s and Engineer’s Guide to the FIDIC Conditions of Contract sets out the essential administrative requirements of a FIDIC based contract by reference to the FIDIC 1999 Red Book. The obligations and duties of the Employer and the Engineer are identified and discussed. Potential pitfalls are highlighted and likely consequences pointed out. The importance of the Employer’s role in the preparation of tenders, which fully reflect his requirements and duties and obligations arising in the execution of the works, is emphasised. The key role of the Engineer in the effective administration of contracts after award is examined and commentary provided. Included in the guide are a number of appendices, including model letters which will be of value to less experienced staff (particularly those whose mother-tongue is not the English language). Engineers, quantity surveyors and project managers engaged in the contractual administration of international projects using FIDIC forms of contract will find the concise guidance in simple and jargon-free language provided here invaluable. This, together with the author’s earlier book, Contractor’s Guide to the FIDIC Conditions of Contract - which describes the duties, rights and responsibilities of the Contractor – represents the totality of supervision, design and execution of construction projects executed under the FIDIC Conditions of Contract. This book’s companion website offers invaluable resources to freely download, adapt and use: Model letters for use by the Employer Model letters for use by the Contractor Sample Interim Payment Certificate Model Form for Submissions to the Engineer Model Form of Engineer’s Order for Varied Works Model Form of Daywork/Daily Record Sheets
Download or read book The FIDIC Forms of Contract written by Nael G. Bunni and published by John Wiley & Sons. This book was released on 2013-02-05 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt: In September 1999, FIDIC introduced its new Suite of Contracts, which included a “new” Red, Yellow, Silver and Green forms of contract. The “new” Red Book was intended to replace the 1992 fourth edition of the Red Book, with the ambition that its use would cease with time. This ambition has not materialised and is unlikely to do so in the future. Despite the importance of the 1999 Forms, there has been very little published on the new concepts adopted in them and how they interact with the previous forms. This important work considers these aspects together with the many developments affecting the fourth edition of the Red Book that have taken place since 1997, when the second edition of this book was published, and relates them to key contracting issues. It is written by a chartered engineer, conciliator and international arbitrator with wide experience in the use of the FIDIC Forms and in the various dispute resolution mechanisms specified in them. Important features of this book include: · background and concepts of the various forms of contract; · a detailed comparison of the wording of the1999 three main forms, which although similar in nature; it nevertheless significantly differs in certain areas where the three forms diverge due to their intended purpose; · analysis of the rights and obligations of the parties involved in the contract and the allocation of risks concerned; · a range of ‘decision tree’ charts, analysing the main features of the 1992 Red Book, including risks, indemnities and insurances, claims and counterclaims, variations, procedure for claims, programme and delay, suspension, payments and certificates, dispute resolution mechanisms, and dispute boards; · a much enlarged discussion of the meaning of “claim” and “dispute” and the types of claim with a discussion of the Notice provision in the 1999 forms of contract for the submittal of claims by a contractor and by an employer; · the FIDIC scheme of indemnities and insurance requirements; and the methods of dispute resolution provided by the various forms of contract; and · five new chapters in this third edition, the first four chapters deal with each of the 1999 forms and the fifth chapter is confined to the topic of Dispute Boards.
Download or read book The Law of Construction Disputes written by Cyril Chern and published by Taylor & Francis. This book was released on 2019-09-17 with total page 1081 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in a fully updated third edition, The Law of Construction Disputes is a leading source of authoritative and detailed information on the whole area of construction law including contracts and their performance, third parties, pursuing claims and dispute resolution. It covers the construction dispute process by analysing the main areas from which disputes arise, up to date case law, and how to effectively deal with construction project disputes once they have arisen. Now including references to the new FIDIC contracts, which were released in 2017, this edition expands on advanced practitioner issues, as well as the emerging law of construction disputes on an international basis and gives the practitioner all the case law needed in one concise volume. The book examines the methods and methodology of construction law, not only for a common law context, but also under other legal systems. Readers will be guided through the various international contract formats governing construction, alongside applicable case law. Additionally, they will be shown the correct contract provisions and forms used to prevent disputes from escalating in order to reach successful conclusions without litigation. Including expert advice and many relevant reference materials, this book is an extremely helpful guide to legal practitioners and construction professionals.
Download or read book FIDIC Contracts Law and Practice written by Ellis Baker and published by CRC Press. This book was released on 2013-07-31 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt: FIDIC Contracts: Law and Practice is sure to become the leading industry standard guide to using the FIDIC forms, and is the only book to date which deals with the whole suites of contracts, including the new gold book for Design, Build and Operate projects. The White & Case work is outstanding in its detailed consideration and treatment of the legal aspects of the interpretation and application of the Conditions, touching on many points that most people would not have encountered. Humphrey LLoyd, International Construction Law Review [2010] ICLR 386
Download or read book FIDIC Plant and Design Build Form of Contract Illustrated written by Raveed Khanlari and published by John Wiley & Sons. This book was released on 2017-05-05 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Conditions of Contract prepared by FIDIC are used extensively as the standard contract of choice in international construction and civil engineering projects. Engineers working on these projects need to be aware of these contracts, but as the forms are complex it can be difficult to draw together all the sub-clauses relating to a particular issue. The FIDIC Plant and Design-Build Forms of Contract Illustrated crystallizes the requirements of the FIDIC P&DB contract into a range of simple to follow flow charts, providing a clear and concise way to rapidly assimilate the requirements of each clause. The relationship between the various clauses in the contract, the concepts, process methods and actors involved in each sub-clause are all easily seen, and key issues around each topic (such as periods allowed, notices, etc) are all documented. In addition, related sub-clauses and/or important additional documents are linked so that the reader has a full understanding of the wider implications of each clause.
Download or read book The FIDIC Contracts written by Andy Hewitt and published by John Wiley & Sons. This book was released on 2014-04-25 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is vital to ensure that your company complies with its contractual obligations. It is also vital to check whether the other parties are complying with theirs. This book was written to help those involved in the management of busy construction projects to find answers to contractual issues arising from the FIDIC forms of contract. The book is organised in such a way that you can find answers in a fraction of the time it would take to study the full conditions of contract. This book sets out the contractual obligations of the Employer, the Contractor, the Engineer and the DAB in a simple tabular form, together with the time-frames in which they should be performed and the consequences of non-compliance. This means that you will have all the information at your fingertips without having to study lengthy contractual clauses. For those using the FIDIC forms for the first time, or perhaps not using them too often, this book is a must, whilst experienced users will find it provides a valuable checklist. Whichever category you fall into, using this book should improve both knowledge and efficiency. The book is ideal for engineers, quantity surveyors, contract managers and any person whose job it is to understand the workings of a FIDIC contract. Roger Knowles had this to say: "The most important part of any contract is the obligations of the parties, the time frames in which the parties must perform these obligations, and the consequences of failing to meet them. Failure to carry out obligations correctly is a serious risk and common source of contention or claims. This practical ready-reference on the contractual obligations of the various parties for a FIDIC construction contract promotes efficient administration of construction projects, prevents contention and aids an easier understanding of their obligations." The FIDIC Contracts: Obligations of the Parties is presented in an easily-referenced, tabular format. The Red, Pink, Red Book Subcontract, Yellow, Silver, Gold, Pink, Green and White Books are all included and for ease of reference, each contract is separated into sections relating to the Employer, the Contractor, the Engineer (or the equivalent) and the DAB. This guide's accessible style will enable all parties and personnel involved in the project to quickly check that their company is performing the required obligations correctly - and also to ensure that other parties are doing the same.
Download or read book Construction Contracts written by John Murdoch and published by Routledge. This book was released on 2002-01-04 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the legal principles involved in construction contracts and their management and administration are an aspect of general contract law, the practical and commercial complexities of the construction industry have increasingly made this a specialist field. Recognizing this, Construction Contracts is a fully revised edition of the UK’s leading textbook on the law governing this area. Brought up to date with recent cases and developments in the law as it stands at July 2000, this new edition: takes full account of the effects of the Housing Grants, Construction and Regeneration Act 1996, the Arbitration Act 1996, the Contracts (Rights of Third Parties) Act 1999 and the changes in the legal system brought about by the Woolf reforms includes extended coverage of financial protection, construction insurance and tendering controls, as well as the Construction (Design and Management) Regulations has been revised to take account of changes to the common standard-form contracts, particularly the New Engineering Contract and the GC/Works family of contracts. Retaining the same basic approach as its successful predecessors, this important text introduces the general principles that underlie contracts in construction, illustrating them by reference to the most important standard forms currently in use.
Download or read book The 2017 FIDIC Contracts written by William Godwin and published by John Wiley & Sons. This book was released on 2020-02-19 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a clear and comprehensive guide to the 2017 FIDIC contracts—written by a member of the FIDIC Updates Task Group FIDIC contracts are the most widely used engineering standard form contracts internationally but until 2017 the three main forms (the Red, Yellow and Silver Books) had not been amended or updated for nearly two decades, since the first editions were published in 1999. Written by a specialist lawyer who was member of the FIDIC Updates Task Group responsible for writing the new contracts, this book examines in detail the many substantial changes they have introduced. After providing an overview the contracts are examined clause by clause with the aim of showing how each compares and contrasts with the others and how the second editions compare and contrast with the first. The first chapter describes how the Red, Yellow and Silver Books evolved from earlier contract forms and the distinctive characteristics of each, before providing an overview of the updates, including new potential risks for both Employer and Contractor, and then examining, in the second chapter, key general provisions such as the new rules on notices and limitation of liability. Chapter 3 examines the enhanced role of the Engineer in the Red and Yellow Books/Employer’s Representative’s function in the Silver including the new procedure for determinations as well as the Employer’s obligations and contract administration. The Contractor’s obligations are considered in chapter 4 while chapter 5 examines his responsibility for design in the Yellow and Silver Books. Chapters 6 to 14 deal respectively with plant, materials and workmanship and staff and labour; time-related provisions in the three contracts including extensions of time, and the Employer’s right to suspend the works; testing on and after completion and the Employer’s taking over of the works; defects after taking over, acceptance of the works and unfulfilled obligations; measurement (in the Red Book), the Contract Price and payment; the new variations regime and adjustments to the Price; termination and suspension; care of the works and indemnities and Exceptional Events (previously, Force Majeure). An important feature of the new contracts is their increased emphasis on clarity in the claims process and on dispute avoidance. These topics are examined in the final two chapters, 15 and 16, which deal respectively with the new claims and dispute resolution provisions of the 2017 forms. FIDIC contracts are the most widely used standard forms of contract for international engineering and construction projects Provides a clear and comprehensive guide to the 2017 FIDIC Red, Yellow and Silver Books Written by a senior specialist lawyer and member of the FIDIC 2017 Updates Task Group responsible for writing the new contracts Accessible to those with little or no familiarity with FIDIC contracts The 2017 FIDIC Contracts is an important guide for anyone engaged in international projects, including employers, contractors, engineers, lawyers, suppliers and project financiers/sponsors.
Download or read book FIDIC Users Guide written by Brian W. Totterdill and published by Thomas Telford. This book was released on 2006 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: The FIDIC Conditions of Contract for Construction and the Conditions of Contract for Plant and Design-Build (known as the 1999 Red Book and the 1999 Yellow Book) were first published in 1999 and have been used for a large number of contracts around the world. During 2005, FIDIC and the multilateral development banks cooperated to publish the MDB Harmonised Conditions of Contract for Construction. This book is a revised and extended edition of the authors earlier guides.
Download or read book Understanding and Negotiating Turnkey and EPC Contracts written by Joseph A. Huse and published by Sweet & Maxwell. This book was released on 2002 with total page 1000 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work aims to keep criminal lawyers up to date with the latest cases and legislation, and includes longer articles analyzing current trends and important changes in the law. Drawing all aspects of the law together in one regular publication, it allows quick and easy reference
Download or read book FIDIC Users Guide written by Brian Barr and published by ICE Publishing. This book was released on 2013-10-29 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition builds on Brian Totterdill's legacy and will ensure that all users are brought up-to-date with the most recent FIDIC developments and its expansion into a more international arena.
Download or read book Construction Contract Variations written by Michael Sergeant and published by CRC Press. This book was released on 2014-05-23 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Changes to the work on construction projects are a common cause of dispute. Such variations lead to thousands of claims in the UK every year and many more internationally. Liability for variations is not only relevant to claims for sums due for extra work but this is also an important underlying factor in many other construction disputes, such as delay, disruption, defects and project termination. This is the first book to deal exclusively with variations in construction contracts and provide the detailed and comprehensive coverage that it demands. Construction Contract Variations analyses the issues that arise in determining whether certain work is a variation, the contractor’s obligation to undertake such work as well as its right to be paid. It deals with the employer’s power to vary and the extent of its duties to approve changes. The book also analyses the role of the consultant in the process and the valuation of variations. It reviews these topics by reference to a range of construction contracts. This is an essential guide for practitioners and industry professionals who advise on these issues and have a role in managing, directing and compensating change. Participants in the construction industry will find this book an invaluable guide, as will specialists and students of construction law, project management and quantity surveying.
Download or read book Construction Risk Management Decision Making written by Alex C. Arthur and published by John Wiley & Sons. This book was released on 2021-12-13 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: CONSTRUCTION RISK MANAGEMENT DECISION MAKING Explores the relevance of systems thinking and behavioral science in construction risk management Effective risk management is a vital component of all successful construction projects. Although quantitative tools for evaluating data and minimizing risk are readily available, construction managers commonly adopt a more innate, experience-based approach. In Construction Risk Management Decision Making, project manager and senior consultant Alex C. Arthur provides step-by-step advice on assessing and prioritizing risk using qualitative decision-making systems in the construction industry. Incorporating key theories and concepts from systems thinking and behavioral science, this highly practical guide focuses on the behavior patterns of real people in the industry, rather than complex quantitative techniques and data. Concise, easy-to-understand chapters highlight the current practices of construction risk management while helping readers view risk and decision making from a broader perspective. Throughout the book, the author presents invaluable insights into the ways construction professionals think and behave in the real world. Addresses the actual risk management practices of construction professionals Applies human behavioral theories to the study of construction risk management decision making Illustrates the highly intuitive approaches prevalent in various construction projects Features real-life case studies and practical examples throughout Construction Risk Management Decision Making is an excellent textbook for advanced students in project management, engineering, construction, and surveying courses, and a must-have guide for practitioners of construction management, surveying, and architecture.
Download or read book The FIDIC Conditions written by John G. Sawyer and published by Thomas Telford. This book was released on 1985 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume outlines the contractual relationships and responsibilities under the third edition of the FIDIC conditions.
