Download or read book Fiber Laser Front Ends for High Energy Short Pulse Lasers written by and published by . This book was released on 2007 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: We are developing a fiber laser system for short pulse (1-10ps), high energy (≈1kJ) glass laser systems. Fiber lasers are ideal for these systems as they are highly reliable and enable long term stable operation.

Download or read book High Energy and Short Pulse Lasers written by Richard Viskup and published by BoD – Books on Demand. This book was released on 2016-09-07 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives the readers an introduction to experimental and theoretical knowledge acquired by large-scale laser laboratories that are dealing with extra-high peak power and ultrashort laser pulses for research of terawatt (TW), petawatt (PW), or near-future exawatt (EW) laser interactions, for soft X-ray sources, for acceleration of particles, or for generation of hot dense thermal plasma for the laser fusion. The other part of this book is dealing with the small-scale laser laboratories that are using for its research on commercial sources of laser radiation, nanosecond (ns), picosecond (ps), or femtosecond (fs) laser pulses, either for basic research or for more advanced applications. This book is divided into six main sections dealing with short and ultrashort laser pulses, laser-produced soft X-ray sources, large-scale high-power laser systems, free-electron lasers, fiber-based sources of short optical pulse, and applications of short pulse lasers. In each chapter readers can find fascinating topics related to the high energy and/or short pulse laser technique. Individual chapters should serve the broad spectrum of readers of different expertise, layman, undergraduate and postgraduate students, scientists, and engineers, who may in this book find easily explained fundamentals as well as advanced principles of particular subjects related to these phenomena.

Download or read book High Average Power High Energy Short Pulse Fiber Laser System written by and published by . This book was released on 2007 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently continuous wave fiber laser systems with output powers in excess of 500W with good beam quality have been demonstrated [1]. High energy, ultrafast, chirped pulsed fiber laser systems have achieved record output energies of 1mJ [2]. However, these high-energy systems have not been scaled beyond a few watts of average output power. Fiber laser systems are attractive for many applications because they offer the promise of high efficiency, compact, robust systems that are turn key. Applications such as cutting, drilling and materials processing, front end systems for high energy pulsed lasers (such as petawatts) and laser based sources of high spatial coherence, high flux x-rays all require high energy short pulses and two of the three of these applications also require high average power. The challenge in creating a high energy chirped pulse fiber laser system is to find a way to scale the output energy while avoiding nonlinear effects and maintaining good beam quality in the amplifier fiber. To this end, our 3-year LDRD program sought to demonstrate a high energy, high average power fiber laser system. This work included exploring designs of large mode area optical fiber amplifiers for high energy systems as well as understanding the issues associated chirped pulse amplification in optical fiber amplifier systems.

Download or read book Ultrashort Pulse Laser Technology written by Stefan Nolte and published by Springer. This book was released on 2015-10-19 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrashort laser pulses with durations in the femtosecond range up to a few picoseconds provide a unique method for precise materials processing or medical applications. Paired with the recent developments in ultrashort pulse lasers, this technology is finding its way into various application fields. The book gives a comprehensive overview of the principles and applications of ultrashort pulse lasers, especially applied to medicine and production technology. Recent advances in laser technology are discussed in detail. This covers the development of reliable and cheap low power laser sources as well as high average power ultrashort pulse lasers for large scale manufacturing. The fundamentals of laser-matter-interaction as well as processing strategies and the required system technology are discussed for these laser sources with respect to precise materials processing. Finally, different applications within medicine, measurement technology or materials processing are highlighted.

Download or read book Fiber Laser Front End for High Energy Petawatt Laser Systems written by J. W. Dawson and published by . This book was released on 2006 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: We are developing a fiber laser front end suitable for high energy petawatt laser systems on large glass lasers such as NIF. The front end includes generation of the pulses in a fiber mode-locked oscillator, amplification and pulse cleaning, stretching of the pulses to>3ns, dispersion trimming, timing, fiber transport of the pulses to the main laser bay and amplification of the pulses to an injection energy of 150 {micro}J. We will discuss current status of our work including data from packaged components. Design detail such as how the system addresses pulse contrast, dispersion trimming and pulse width adjustment and impact of B-integral on the pulse amplification will be discussed. A schematic of the fiber laser system we are constructing is shown in figure 1 below. A 40MHz packaged mode-locked fiber oscillator produces {approx}1nJ pulses which are phase locked to a 10MHz reference clock. These pulses are down selected to 100kHz and then amplified while still compressed. The amplified compressed pulses are sent through a non-linear polarization rotation based pulse cleaner to remove background amplified spontaneous emission (ASE). The pulses are then stretched by a chirped fiber Bragg grating (CFBG) and then sent through a splitter. The splitter splits the signal into two beams. (From this point we follow only one beam as the other follows an identical path.) The pulses are sent through a pulse tweaker that trims dispersion imbalances between the final large optics compressor and the CFBG. The pulse tweaker also permits the dispersion of the system to be adjusted for the purpose of controlling the final pulse width. Fine scale timing between the two beam lines can also be adjusted in the tweaker. A large mode area photonic crystal single polarization fiber is used to transport the pulses from the master oscillator room to the main laser bay. The pulses are then amplified a two stage fiber amplifier to 150mJ. These pulses are then launched into the main amplifier chain. We are currently constructing a packaged prototype of this system, which will ultimately be deployed on the National Ignition Facility (NIF). In our talk we will discuss the packaged components as well as the numerous technical challenges that needed to be overcome in order to make this system possible. Of particular interest was the quality of recompressed pulses that could be achieved with a CFBG. We will show background free auto-correlation data from pulses with a dynamic range noise limited to six orders of magnitude that were stretched with a CFBG and then recompressed in a standard compressor (figure 2). We will also discuss in detail the impact of B-integral accumulation on the recompressed pulses. Our current system is projected to run at an accumulated B-integral of 7. However, because our injected system bandwidth is much wider than the NIF system bandwidth our system can tolerate this high B-integral.

Download or read book Ultra Fast Fiber Lasers written by Le Nguyen Binh and published by CRC Press. This book was released on 2018-09-03 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrashort pulses in mode-locked lasers are receiving focused attention from researchers looking to apply them in a variety of fields, from optical clock technology to measurements of the fundamental constants of nature and ultrahigh-speed optical communications. Ultrashort pulses are especially important for the next generation of ultrahigh-speed optical systems and networks operating at 100 Gbps per carrier. Ultra Fast Fiber Lasers: Principles and Applications with MATLAB® Models is a self-contained reference for engineers and others in the fields of applied photonics and optical communications. Covering both fundamentals and advanced research, this book includes both theoretical and experimental results. MATLAB files are included to provide a basic grounding in the simulation of the generation of short pulses and the propagation or circulation around nonlinear fiber rings. With its unique and extensive content, this volume— Covers fundamental principles involved in the generation of ultrashort pulses employing fiber ring lasers, particularly those that incorporate active optical modulators of amplitude or phase types Presents experimental techniques for the generation, detection, and characterization of ultrashort pulse sequences derived from several current schemes Describes the multiplication of ultrashort pulse sequences using the Talbot diffraction effects in the time domain via the use of highly dispersive media Discusses developments of multiple short pulses in the form of solitons binding together by phase states Elucidates the generation of short pulse sequences and multiple wavelength channels from a single fiber laser The most practical short pulse sources are always found in the form of guided wave photonic structures. This minimizes problems with alignment and eases coupling into fiber transmission systems. In meeting these requirements, fiber ring lasers operating in active mode serve well as suitable ultrashort pulse sources. It is only a matter of time before scientists building on this research develop the practical and easy-to-use applications that will make ultrahigh-speed optical systems universally available.

Download or read book Fiber Lasers written by Oleg G. Okhotnikov and published by John Wiley & Sons. This book was released on 2012-06-26 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive account of the latest developments and applications in this rapidly developing field, covering a wide range of topics, such as power scaling and short pulse generation, dispersion management and modeling, broadband supercontinuum generation and wavelength tailoring. The book brings together contributions from the world's leading experts at major collaborative research centers throughout Europe, Australia, Russia and the USA. Each chapter presents a tutorial style introduction to the selected topic suitable for scientists, researchers and experts, as well as graduate and postgraduate students with a basic background in optics.

Download or read book Fiber Lasers written by Liang Dong and published by CRC Press. This book was released on 2016-09-19 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fiber laser, with its humble beginning in the late 1980s, has undergone tremendous development in the past decade or so, transforming itself from a research curiosity to a major force in modern manufacturing. Today, it is revolutionizing our economy by fundamentally changing the way we mark, machine, and process materials on an industrial scale. The recent development of high-power fiber lasers is also fundamentally shaping a wide range of other areas from physical sciences and medicine to geology and space exploration. In the past few years, the tactical deployment of direct energy weapons based on fiber lasers has become a reality. The development of fiber lasers is rooted in a number of technical areas including optical materials, optical waveguide design, nonlinear optics, optical fiber fabrication, and optical characterization, in addition to optical fiber components, and fiber laser design and architecture. No comprehensive in-depth coverage of such diverse topical areas has appeared in a single book. Many important developments have taken place in the past decade in both academia and industry. This book comprehensively covers the basics, technology and applications of fiber lasers including up-to-date developments in both academia and industry and is aimed to serve as both an introduction and research aid for graduate students, engineers, and scientists who are new to this field and also for veterans in the field

Download or read book Integrated Microsystems written by Krzysztof Iniewski and published by CRC Press. This book was released on 2017-12-19 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: As rapid technological developments occur in electronics, photonics, mechanics, chemistry, and biology, the demand for portable, lightweight integrated microsystems is relentless. These devices are getting exponentially smaller, increasingly used in everything from video games, hearing aids, and pacemakers to more intricate biomedical engineering and military applications. Edited by Kris Iniewski, a revolutionary in the field of advanced semiconductor materials, Integrated Microsystems: Electronics, Photonics, and Biotechnology focuses on techniques for optimized design and fabrication of these intelligent miniaturized devices and systems. Composed of contributions from experts in academia and industry around the world, this reference covers processes compatible with CMOS integrated circuits, which combine computation, communications, sensing, and actuation capabilities. Light on math and physics, with a greater emphasis on microsystem design and configuration and electrical engineering, this book is organized in three sections—Microelectronics and Biosystems, Photonics and Imaging, and Biotechnology and MEMs. It addresses key topics, including physical and chemical sensing, imaging, smart actuation, and data fusion and management. Using tables, figures, and equations to help illustrate concepts, contributors examine and explain the potential of emerging applications for areas including biology, nanotechnology, micro-electromechanical systems (MEMS), microfluidics, and photonics.

Download or read book Urolithiasis written by Jamsheer J. Talati and published by Springer Science & Business Media. This book was released on 2012-12-22 with total page 955 pages. Available in PDF, EPUB and Kindle. Book excerpt: Urolithiasis: Basic Science and Clinical Practice is a comprehensive text that assists urologists in defining the best choice of treatment for each case through a balanced presentation of underlying science, diagnostic methods and practical tips, with additional discussions on educational issues, costs and management of resources. This user-friendly practical resource is replete with full-color illustrations and radiographs, covering all aspects of stone disease, and offering perspectives from Europe, the Americas, China, South Asia, Africa, and Australia. Topics include the biochemical and physiological basis of stone formation, treatment options, complications, assessment of techniques and technologies available, and guidelines on the prevention of stone recurrence. Urolithiasis: Basic Science and Clinical Practice is the definitive text on stone disease and is a must read for young consultants starting a new practice, and urologists in residence and training.

Download or read book Chemometrics and Numerical Methods in LIBS written by Vincenzo Palleschi and published by John Wiley & Sons. This book was released on 2022-10-06 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemometrics and Numerical Methods in LIBS A practical guide to the application of chemometric methods to solve qualitative and quantitative problems in LIBS analyses Chemometrics and Numerical Methods in LIBS, delivers an authoritative and practical exploration of the use of advanced chemometric methods to laser-induced breakdown spectroscopy (LIBS) cases. The book discusses the fundamentals of chemometrics before moving on to solutions that can be applied to data analysis methods. It is a concise guide designed to help readers at all levels of knowledge solve commonly encountered problems in the field. The book includes three sections: LIBS information simplification, LIBS classification, and quantitative analysis by LIBS. Each section of the book is divided into a description of relevant techniques and practical examples of its applications. Contributors to this edited volume are the most recognized international experts on the chemometric techniques relevant to LIBS analysis. Chemometrics and Numerical Methods in LIBS also includes: A thorough introduction to the simplification of LIBS information, including principal component analysis, independent component analysis, and parallel factor analysis Comprehensive explorations of classification by LIBS, including spectral angle mapping, linear discriminant analysis, graph clustering, self-organizing maps, and artifical neural networks Practical discussions of linear methods for quantitative analysis by LIBS, including calibration curves, partial least squares regression, and limit of detection In-depth examinations of multivariate analysis and non-linear methods, including calibration-free LIBS, the non-linear Kalman filter, artificial and convolutional neural networks for quantification Relevant for researchers and PhD students seeking practical information on the application of advanced statistical methods to the analysis of LIBS spectra, Chemometrics and Numerical Methods in LIBS will also earn a place in the libraries of students taking courses involving LIBS spectro-analytical techniques

Download or read book Handbook of Biological Confocal Microscopy written by James Pawley and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 639 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition of a classic text in biological microscopy includes detailed descriptions and in-depth comparisons of parts of the microscope itself, digital aspects of data acquisition and properties of fluorescent dyes, the techniques of 3D specimen preparation and the fundamental limitations, and practical complexities of quantitative confocal fluorescence imaging. Coverage includes practical multiphoton, photodamage and phototoxicity, 3D FRET, 3D microscopy correlated with micro-MNR, CARS, second and third harmonic signals, ion imaging in 3D, scanning RAMAN, plant specimens, practical 3D microscopy and correlated optical tomography.

Download or read book Laser Systems for Applications written by Krzysztof Jakubczak and published by BoD – Books on Demand. This book was released on 2011-12-14 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses topics related to various laser systems intended for the applications in science and various industries. Some of them are very recent achievements in laser physics (e.g. laser pulse cleaning), while others face their renaissance in industrial applications (e.g. CO2 lasers). This book has been divided into four different sections: (1) Laser and terahertz sources, (2) Laser beam manipulation, (3) Intense pulse propagation phenomena, and (4) Metrology. The book addresses such topics like: Q-switching, mode-locking, various laser systems, terahertz source driven by lasers, micro-lasers, fiber lasers, pulse and beam shaping techniques, pulse contrast metrology, and improvement techniques. This book is a great starting point for newcomers to laser physics.

Download or read book Minimally Invasive Urological Surgery written by Robert G. Moore and published by CRC Press. This book was released on 2005-01-25 with total page 1521 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical and easy to use, this superbly illustrated text will provide the trainee with diagnostic and surgical guidance, tips and tricks, and a good solid background to the use of minimally invasive urological surgery techniques. The editors, all experts in urological laparoscopy, have chosen an elite team, mainly from the USA and Germany,

Download or read book Advances in Manufacturing for Aerospace Alloys written by Selim Gürgen and published by Springer Nature. This book was released on with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fiber Lasers written by Liang Dong and published by CRC Press. This book was released on 2016-09-19 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fiber laser, with its humble beginning in the late 1980s, has undergone tremendous development in the past decade or so, transforming itself from a research curiosity to a major force in modern manufacturing. Today, it is revolutionizing our economy by fundamentally changing the way we mark, machine, and process materials on an industrial scale. The recent development of high-power fiber lasers is also fundamentally shaping a wide range of other areas from physical sciences and medicine to geology and space exploration. In the past few years, the tactical deployment of direct energy weapons based on fiber lasers has become a reality. The development of fiber lasers is rooted in a number of technical areas including optical materials, optical waveguide design, nonlinear optics, optical fiber fabrication, and optical characterization, in addition to optical fiber components, and fiber laser design and architecture. No comprehensive in-depth coverage of such diverse topical areas has appeared in a single book. Many important developments have taken place in the past decade in both academia and industry. This book comprehensively covers the basics, technology and applications of fiber lasers including up-to-date developments in both academia and industry and is aimed to serve as both an introduction and research aid for graduate students, engineers, and scientists who are new to this field and also for veterans in the field

Download or read book High Energy Short Pulse Fiber Injection Lasers at Lawrence Livermore National Laboratory written by and published by . This book was released on 2008 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: A short pulse fiber injection laser for the Advanced Radiographic Capability (ARC) on the National Ignition Facility (NIF) has been developed at Lawrence Livermore National Laboratory (LLNL). This system produces 100 [mu]J pulses with 5 nm of bandwidth centered at 1053 nm. The pulses are stretched to 2.5 ns and have been recompressed to sub-ps pulse widths. A key feature of the system is that the pre-pulse power contrast ratio exceeds 80 dB. The system can also precisely adjust the final recompressed pulse width and timing and has been designed for reliable, hands free operation. The key challenges in constructing this system were control of the signal to noise ratio, dispersion management and managing the impact of self phase modulation on the chirped pulse.