Download or read book RF Superconductivity for Accelerators written by Hasan Padamsee and published by John Wiley & Sons. This book was released on 2008-02-26 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces some of the key ideas of this exciting field, using a pedagogic approach, and presents a comprehensive overview of the field. It is divided into four parts. The first part introduces the basic concepts of microwave cavities for particle acceleration. The second part is devoted to the observed behavior of superconducting cavities. In the third part,general issues connected with beam-cavity interaction and the related issues for the critical components are covered. The final part discusses applications of superconducting cavities to frontier accelerators of the future, drawing heavily on the examples that are in their most advanced stage. Each part of the book ends in a Problems section to illustrate and amplify text material as well as draw on example applications of superconducting cavities to existing and future accelerators.
Download or read book High Luminosity Large Hadron Collider HL LHC written by G.. Apollinari and published by . This book was released on 2017 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book LHC Design Report written by and published by . This book was released on 2004 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Beam Acceleration In Crystals And Nanostructures Proceedings Of The Workshop written by Gerard Mourou and published by . This book was released on 2020 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Recent advancements in generation of intense X-ray laser ultrashort pulses open opportunities for particle acceleration in solid-state plasmas. Wakefield acceleration in crystals or carbon nanotubes shows promise of unmatched ultra-high accelerating gradients and possibility to shape the future of high energy physics colliders. This book summarizes the discussions of the "Workshop on Beam Acceleration in Crystals and Nanostructures" (Fermilab, June 24-25, 2019), presents next steps in theory and modeling and outlines major physics and technology challenges toward proof-of-principle demonstration experiments"--Publisher's website.
Download or read book The Large Hadron Collider written by Lyndon R. Evans and published by EPFL Press. This book was released on 2009-01-01 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the technology and engineering of the Large Hadron collider (LHC), one of the greatest scientific marvels of this young 21st century. This book traces the feat of its construction, written by the head scientists involved, placed into the context of the scientific goals and principles.
Download or read book Physics Division Annual Report written by Argonne National Laboratory. Physics Division and published by . This book was released on 1998 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Semiconductor Device Reliability written by A. Christou and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication is a compilation of papers presented at the Semiconductor Device Reliabi lity Workshop sponsored by the NATO International Scientific Exchange Program. The Workshop was held in Crete, Greece from June 4 to June 9, 1989. The objective of the Workshop was to review and to further explore advances in the field of semiconductor reliability through invited paper presentations and discussions. The technical emphasis was on quality assurance and reliability of optoelectronic and high speed semiconductor devices. The primary support for the meeting was provided by the Scientific Affairs Division of NATO. We are indebted to NATO for their support and to Dr. Craig Sinclair, who admin isters this program. The chapters of this book follow the format and order of the sessions of the meeting. Thirty-six papers were presented and discussed during the five-day Workshop. In addi tion, two panel sessions were held, with audience participation, where the particularly controversial topics of bum-in and reliability modeling and prediction methods were dis cussed. A brief review of these sessions is presented in this book.
Download or read book Fermilab Report written by and published by . This book was released on 1984 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Superconductivity written by R.G. Sharma and published by Springer. This book was released on 2015-02-26 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the basics and applications of superconducting magnets. It explains the phenomenon of superconductivity, theories of superconductivity, type II superconductors and high-temperature cuprate superconductors. The main focus of the book is on the application to superconducting magnets to accelerators and fusion reactors and other applications of superconducting magnets. The thermal and electromagnetic stability criteria of the conductors and the present status of the fabrication techniques for future magnet applications are addressed. The book is based on the long experience of the author in studying superconducting materials, building magnets and numerous lectures delivered to scholars. A researcher and graduate student will enjoy reading the book to learn various aspects of magnet applications of superconductivity. The book provides the knowledge in the field of applied superconductivity in a comprehensive way.
Download or read book The Large Hadron Collider written by Lyndon Evans and published by . This book was released on 2018 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book RF Superconductivity written by Hasan Padamsee and published by John Wiley & Sons. This book was released on 2009-03-30 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second book to RF Superconducting, written by one of the leading experts. The book provides fast and up-to-date access to the latest advances in the key technology for future accelerators. Experts as well as newcomers to the field will benefit from the discussion of progress in the basic science, technology as well as recent and forthcoming applications. Researchers in accelerator physics will also find much that is relevant to their discipline.
Download or read book Superconducting Accelerator Magnets written by K.-H. Mess and published by World Scientific. This book was released on 1996 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main topic of the book are the superconducting dipole and quadrupole magnets needed in high-energy accelerators and storage rings for protons, antiprotons or heavy ions. The basic principles of low-temperature superconductivity are outlined with special emphasis on the effects which are relevant for accelerator magnets. Properties and fabrication methods of practical superconductors are described. Analytical methods for field calculation and multipole expansion are presented for coils without and with iron yoke. The effect of yoke saturation and geometric distortions on field quality is studied. Persistent magnetization currents in the superconductor and eddy currents the copper part of the cable are analyzed in detail and their influence on field quality and magnet performance is investigated. Superconductor stability, quench origins and propagation and magnet protection are addressed. Some important concepts of accelerator physics are introduced which are needed to appreciate the demanding requirements on field quality in large storage rings. The operational experience with the superconducting HERA collider serves as an illustration. Finally superconducting correction coils and practical construction and fabrication methods of accelerator magnets are discussed. The physical and technical principles described in the book are substantiated with a wealth of experimental data on multipoles, persistent- and eddy-current effects, quench performance and much more.
Download or read book Cryostat Design written by J.G. Weisend II and published by Springer. This book was released on 2016-08-12 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book enables the reader to learn the fundamental and applied aspects of practical cryostat design by examining previous design choices and resulting cryostat performance. Through a series of extended case studies the book presents an overview of existing cryostat design covering a wide range of cryostat types and applications, including the magnet cryostats that comprise the majority of the Large Hadron Collider at CERN, space-borne cryostats containing sensors operating below 1 K, and large cryogenic liquid storage vessels. It starts with an introductory section on the principles of cryostat design including practical data and equations. This section is followed by a series of case studies on existing cryostats, describing the specific requirements of the cryostat, the challenges involved and the design choices made along with the resulting performance of the cryostat. The cryostat examples used in the studies are chosen to cover a broad range of cryostat applications and the authors of each case are leading experts in the field, most of whom participated in the design of the cryostats being described. The concluding chapter offers an overview of lessons learned and summarises some key hints and tips for practical cryostat design. The book will help the reader to expand their knowledge of many disciplines required for good cryostat design, including the cryogenic properties of materials, heat transfer and thermal insulation, instrumentation, safety, structures and seals.
Download or read book Elementary Particles Accelerators and Colliders written by Ugo Amaldi and published by Springer. This book was released on 2013-03-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: After a historical consideration of the types and evolution of accelerators the physics of particle beams is provided in detail. Topics dealt with comprise linear and nonlinear beam dynamics, collective phenomena in beams, and interactions of beams with the surroundings. The design and principles of synchrotrons, circular and linear colliders, and of linear accelerators are discussed next. Also technological aspects of accelerators (magnets, RF cavities, cryogenics, power supply, vacuum, beam instrumentation, injection and extraction) are reviewed, as well as accelerator operation (parameter control, beam feedback system, orbit correction, luminosity optimization). After introducing the largest accelerators and colliders of their times the application of accelerators and storage rings in industry, medicine, basic science, and energy research is discussed, including also synchrotron radiation sources and spallation sources. Finally, cosmic accelerators and an outlook for the future are given.
Download or read book Electrostatic Accelerators written by Ragnar Hellborg and published by Springer Science & Business Media. This book was released on 2005-04-21 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrostatic accelerators are an important and widespread subgroup within the broad spectrum of modern, large particle acceleration devices. They are specifically designed for applications that require high-quality ion beams in terms of energy stability and emittance at comparatively low energies (a few MeV). Their ability to accelerate virtually any kind of ion over a continuously tunable range of energies makes them a highly versatile tool for investigations in many research fields including, but not limited to, atomic and nuclear spectroscopy, heavy ion reactions, accelerator mass spectroscopy as well as ion-beam analysis and modification. The book is divided into three parts. The first part concisely introduces the field of accelerator technology and techniques that emphasize their major modern applications. The second part treats the electrostatic accelerator per se: its construction and operational principles as well as its maintenance. The third part covers all relevant applications in which electrostatic accelerators are the preferred tool for accelerator-based investigations. Since some topics are common to all types of accelerators, Electrostatic Accelerators will also be of value for those more familiar with other types of accelerators.
Download or read book Proceedings of the 1999 Particle Accelerator Conference written by Alfredo U. Luccio and published by . This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physics at Fermilab in the 1990 s August 15 24 1989 Breckenridge Colorado written by Dan Green and published by World Scientific Publishing Company. This book was released on 1990 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference celebrates the 40th anniversary of the first Rochester Conference and honours Prof. Susumu Okubo on his 60th birthday. The original Rochester Conference brought a small group of leading physicists to discuss current results and trends in both theory and experiment. The present conference has also adhered to this format -- covering the developments in particle physics over the last forty years and presenting the latest theoretical and experimental results in the field.
