Download or read book Feedback from Remanufacturing written by Louise Lindkvist Haziri and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Company interest and research in the circular economy and remanufacturing have increased as a means of reducing negative environmental impacts. Remanufacturing is an industrial process whereby used products are returned to a state of like-new. However, few products are designed for remanufacturing, and further research and industrial efforts are needed to facilitate more widespread use of design for remanufacturing. One crucial factor facilitating design for remanufacturing is the integration of feedback in the product design process. Thus, the objective of this paper is to analyse feedback flows from remanufacturing to product design. Hence, a literature study and multiple case studies (with three companies named Cases A-C) were conducted at three companies that design, manufacture and remanufacture different kinds of products. The cross-case analysis revealed the five barriers of the lack of internal awareness, lack of knowledge, lack of incentives, lack of feedback channels and non-supportive organisational structures, and the five enablers of business opportunities, integrated design processes, customers' demand, laws, regulations and standards, and new technologies. To establish improved feedback from remanufacturing to product design, the barriers need to be addressed and the enablers explored. Thus, improved feedback from remanufacturing to product design will improve the design of future products suited for a more circular economy. This extended abstract is an excerpt of an already published journal article by the authors.

Download or read book Remanufacturing and Remanufacturability Assessment for the Circular Economy written by Yang Shanshan and published by CRC Press. This book was released on 2022-12-02 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents decision support tools that can be used in the early design stage to analyze the feasibility of a product and its components for remanufacturing. It also covers how to design a product specifically for remanufacturing and offers supporting case studies. This is a comprehensive solutions guide for remanufacturing decision-making. The book illustrates an approach that can be used at the product End-of-Life (EOL) stage to generate optimized recovery plans for the returned products. Opportunities for Industry 4.0 to support remanufacturing along with case studies are included to showcase the decision-making tools. Remanufacturing and Remanufacturability Assessment for the Circular Economy: A Solutions Guide will be of interest to practitioners, business professionals, and researchers that work in the industrial and manufacturing sectors. Those involved with supply chain management and advanced technologies associated with Industry 4.0, sustainability, and integrated techniques of circular supply chains will also find this book very useful.

Download or read book Remanufacturing Initiation for Original Equipment Manufacturers written by Johan Vogt Duberg and published by Linköping University Electronic Press. This book was released on 2024-04-29 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: Remanufacturing is an industrial process in which a core – a used, discarded, or broken product – is transformed into a product with a like-new specification and condition. However, to this date, remanufacturing activities on the market are few compared to manufacturing. There are several types of remanufacturers; the least common type is the original equipment remanufacturer, an original equipment manufacturer that not only manufactures new products but also remanufactures cores of its own products. Remanufacturing is potentially becoming a more widely used industrial process for original equipment manufacturers, and increased remanufacturing activities can positively contribute to the environment. The contribution comes from a reduction of raw material and energy consumption compared to manufacturing. Therefore, remanufacturing has the potential to decouple environmental impact from economic growth, thus contributing to more sustainable societies. However, assessing the benefits of remanufacturing does not directly correlate to growth within the remanufacturing industry. To encapsulate the environmental, social, and economic benefits of remanufacturing, manufacturers need to be aware of how remanufacturing can be initiated and implemented in practice. Therefore, the objective of this dissertation is to develop support measures for original equipment manufacturers to initiate profitable remanufacturing. This research takes a stand in case study and transdisciplinary research where the initiation of profitable remanufacturing is studied at two original equipment manufacturers. The research study developed knowledge of how remanufacturing could be incorporated into existing operations at original equipment manufacturers. In parallel, financial assessments based on cost-benefit analysis were built to measure how well the case companies could perform remanufacturing. For the case study research, seven remanufacturing scenarios were developed, ranging from centralised remanufacturing performed by the original equipment manufacturer to decentralised performed at multiple locations using a retail network. Which scenario is preferable depends on, for example, risk-consciousness, cooperation between actors, and volume targets. However, given ideal circumstances, remanufacturing in-house in a centralised scenario was shown to be the most beneficial for the investigated original equipment manufacturer since the fewer middle hands and economies of scale also potentially enable lower costs. For the transdisciplinary research, the remanufacturing initiation was business model-centric, meaning that the remanufacturing system was a consequence of a decision for a specific business model. Here, a scenario-based analysis was developed to understand under which circumstances the business model with remanufacturing was more lucrative for the provider – the original equipment manufacturer – and less costly for the users – the customers. For this, a systematic assessment approach was developed consisting of three steps: (1) provide a cost overview for each business model, (2) create scenarios by modifying the cost drivers, and (3) combine scenarios to reach synergetic effects. Based on the case study, two sets of four prerequisites for initiating remanufacturing were derived. These are divided into essential and supporting prerequisites and illustrated through a framework called the Remanufacturing Rocket. The essential prerequisites highlight fundamental requirements to perform remanufacturing. Should one of these four factors be missing, remanufacturing cannot be successfully initiated. The supporting prerequisites are valuable to enhance the effectiveness and efficiency of the process, such as through streamlined operations, organisational change, or information exchange. Hence, to reach the fullest potential of remanufacturing, both the essential and the supporting prerequisites are needed. Furthermore, the area of financial assessments was explored in a systematic literature review to identify insights for developing such assessments tailored for individual original equipment manufacturers in initiating remanufacturing. For this, six perspectives for framing financial assessments are proposed. These cover the system boundaries for the assessments as well as the individual needs and visions of original equipment manufacturers. Additionally, a framework was developed to select financial assessment models for remanufacturing initiations based on ease of use and capability to handle complex datasets. Conclusively, it is proposed to apply the prerequisites for initiating remanufacturing together with a financial assessment in an iterative manner to investigate the profitability for original equipment manufacturers to initiate remanufacturing. The essential prerequisites influence the first iteration of the financial assessment, which then contributes to refinements of how the essential prerequisites should be aligned in an economically preferable way. Once satisfactory, another iterative process could be initiated between the supporting prerequisites and the financial assessment. By using the proposed approach, the prospects of profitable remanufacturing could be thoroughly investigated before attempting to initiate a process in practice, thus reducing the number of resources spent in vain. Additionally, the iterative process was integrated into a 5-step Approach For Initiating Remanufacturing (5AFIR) to guide original equipment manufacturers towards initiating profitable remanufacturing. Refabrikation (oder Wiederaufbereitung, engl. Remanufacturing) ist ein industrieller Prozess, bei dem ein Altteil – ein gebrauchtes, ausrangiertes, verschlissenes oder defektes Produkt – gemäß den Herstellerspezifikationen in einen neuwertigen Zustand gebracht wird. Heutzutage macht Refabrikation allerdings nur einen kleinen Teil der Fertigungsindustrie aus. Verschiedene Arten von Unternehmen betreiben Refabrikation, wobei Originalgerätehersteller, sogenannte OEMs (engl. für Original Equipment Manufacturer), am seltensten sind. Solche OEMs betreiben neben Produktion auch eine Wiederaufbereitung ihrer eigenen Produkte. Refabrikation kann sowohl ökologische als auch ökonomische Vorteile bringen und hat somit grundsätzlich hohes Marktpotential. Der geringere Rohstoff- und Energieverbrauch von Refabrikation im Vergleich zu Neuproduktion ist ein Beispiel für ökologischen Vorteil. Refabrikation ermöglicht außerdem, negative Umweltauswirkungen durch Produktion und Wirtschaftswachstum voneinander unabhängig zu machen und trägt somit zu nachhaltigem Wachstum bei. Allerdings hängt der Nutzen von Refabrikation nicht direkt mit dem Wachstum innerhalb der Refabrikationsbranche zusammen. Um die ökologischen, sozialen und ökonomischen Vorteile nutzen zu können, müssen Hersteller Kompetenz zur praktischen Umsetzung von Refabrikation aufbauen. Ziel dieser Dissertation ist daher die Entwicklung von Unterstützungsmaßnahmen und -konzepten für OEMs, die zu profitabler Refabrikation führen. Diese Arbeit basiert auf einer Fallstudie und auf transdisziplinärer Forschung, bei der die Einführung von profitabler Refabrikation bei zwei OEMs untersucht wurde. Die Fallstudie lieferte Erkenntnisse darüber, wie Refabrikation in bestehende Abläufe bei OEMs integriert werden kann. Außerdem wurden finanzielle Bewertungskriterien auf der Grundlage einer Kosten-Nutzen-Analyse erstellt, um messen zu können, wie erfolgreich die untersuchten Unternehmen Refabrikation implementieren könnten. Für die Fallstudie wurden sieben Refabrikationsszenarien entwickelt, die von zentraler Refabrikation durch das OEM bis zu dezentraler Refabrikation an mehreren Standorten durch ein Netzwerk von Niederlassungen reichen. Welches der Szenarien vorzuziehen ist, hängt beispielsweise vom Risikobewusstsein, der Zusammenarbeit der Akteure und den angestrebten Stückzahlen ab. Unter idealen Umständen erwies sich die unternehmensinterne Refabrikation mit zentralisierter Struktur als das vorteilhafteste Szenario. Für die untersuchten OEMs führten weniger Zwischenhändler und Größenvorteile zu geringeren Kosten. In der transdisziplinären Forschung dieser Dissertation wurde davon ausgegangen, dass das Refabrikationssystem aus der Entscheidung für ein bestimmtes Geschäftsmodell folgt. Basierend auf verschiedenen Szenarien wurde analysiert, unter welchen Umständen das Geschäftsmodell inklusive Refabrikation für den Anbieter (OEM) lukrativer und für die Anwender (Kunden) kostengünstiger war. Hierzu wurde ein systematisches Bewertungsschema entwickelt, das aus drei Schritten besteht: (1) Bereitstellung einer Kostenübersicht für jedes Geschäftsmodell, (2) Erstellung von Szenarien durch Modifikation der Kostentreiber und (3) Kombination von Szenarien, um Synergieeffekte zu erzielen. Anforderungen für die Einführung von Refabrikation wurden auf Basis der Fallstudie abgeleitet. Diese sind in vier essentielle und vier unterstützende Anforderungen eingeteilt und werden durch ein Modell namens Refabrikationsrakete veranschaulicht. Die essentiellen Anforderungen sind grundlegend für die Durchführung von Refabrikation. Ist eine dieser vier Anforderungen nicht erfüllt, kann Refabrikation nicht erfolgreich umgesetzt werden. Die unterstützenden Anforderungen steigern die Effektivität und Effizienz des Einführungsprozesses, beispielsweise durch optimierte Abläufe, organisatorische Änderungen oder Informationsaustausch. Um das volle Potenzial von Refabrikation auszuschöpfen, müssen sowohl die essentiellen als auch die unterstützenden Anforderungen erfüllt werden. Wirtschaftliche Bewertungskriterien wurden im Rahmen einer systematischen Literaturrecherche betrachtet. Ziel der Recherche war es, Erkenntnisse für die Entwicklung solcher Bewertungskriterien zu erlangen. Die Kriterien sollen dabei auf einzelne OEMs und die Einführung von Refabrikation zugeschnitten sein. In dieser Arbeit werden sechs Ansätze für die Entwicklung wirtschaftlicher Bewertungskriterien vorgeschlagen. Diese Ansätze behandeln sowohl Systemgrenzen für die Bewertungskriterien als auch individuelle Bedürfnisse und Ziele der OEM. Darüber hinaus wurde ein Rahmenwerk entwickelt, um wirtschaftliche Bewertungskriterien auf Basis ihrer Benutzerfreundlichkeit und ihrer Fähigkeit zur Bewältigung komplexer Datenmengen auszuwählen. Abschließend wird vorgeschlagen, die Anforderungen für die Einführung von Refabrikation zusammen mit einer wirtschaftlichen Bewertung iterativ zu prüfen, um die Rentabilität von Refabrikation für OEMs zu analysieren. Die essentiellen Anforderungen beeinflussen die erste Iterationsschleife der wirtschaftlichen Bewertung. In dieser ersten Schleife wird verfeinert, wie die Grundanforderungen wirtschaftlich sinnvoll kombiniert werden können. Es folgt eine zweite Iterationsschleife zwischen den unterstützenden Anforderungen und der finanziellen Bewertung. Mit diesem Vorgehen kann das Potential einer rentablen Refabrikation gründlich untersucht werden bevor mit der Realisierung begonnen wird. Dadurch können eventuell erfolglose Einführungsversuche vermieden und vergeblich aufgewendete Ressourcen reduziert werden. Der iterative Prozess wurde in einen 5-stufigen Modell zur Einführung von Refabrikation (5AFIR) zusammengefasst. Återtillverkning är en industriell process där en stomme – en använd, uttjänt eller trasig produkt – omformas till en produkt vars specifikation och kvalitet motsvarar nyskick. Idag utgör återtillverkning endast en liten del av den totala tillverkningsindustrin. Det finns flera typer av återtillverkare; den ovanligaste är originaltillverkande återtillverkare, det vill säga, ett tillverkande företag som även återtillverkar sina egna produkter. Genom den låga grad av återtillverkning bland originaltillverkare idag finns det utrymme för att verka för en ökning. En sådan ökning kan bidra till miljömässiga fördelar genom att mängden råmaterial och energi reduceras jämfört med nytillverkning. Det finns därför en möjlighet för återtillverkning att bidra till en frikoppling av miljömässig påverkan från ekonomisk tillväxt, vilket i sin tur bidrar till ett mer hållbart samhälle. Fast att endast värdera nyttan av återtillverkning leder inte direkt till en tillväxt inom återtillverkningsindustrin. För att omfamna de miljömässiga, sociala och ekonomiska nyttor som återtillverkning kan bidra med måste originaltillverkare vara medvetna om hur återtillverkning kan initieras och implementeras i praktiken på ett ekonomiskt lönsamt sätt. Denna doktorsavhandlings syfte är därför att utveckla stöd för originaltillverkare att initiera lönsam återtillverkning. Forskningen utgår från en fallstudie och transdisciplinär forskningsmetodik där initieringen av lönsam återtillverkning studeras vid två originaltillverkare. Den utförda forskningen utvecklade kunskap om hur återtillverkning kan integrerats i en originaltillverkares befintliga verksamhet. Parallellt med detta utvecklades ekonomiska utvärderingsmetoder för att tillhandahålla ett mått på hur väl fallföretagen skulle kunna utföra återtillverkning. För fallstudien utvecklades det sju återtillverkningsscenarion som sträcker sig från centraliserad återtillverkning, som utförs av originaltillverkaren, till decentraliserad, som utförs vid flertalet platser inom ett återförsäljarnätverk. Vilket scenario som var mest fördelaktigt berodde exempelvis på riskmedvetenhet, samarbete mellan aktörer, och tillverkningsvolym. Men givet ideala förhållanden visades det att centraliserad återtillverkning vore potentiellt mest fördelaktigt för fallföretaget, eftersom färre mellanhänder och stordriftsfördelar möjliggör lägre kostnader. För det andra fallföretagets initieringen av återtillverkning vid tillämpning av den transdisciplinära forskningsmetodiken var det ett affärsmodellsfokus, vilket innebar att återtillverkningssystemet var en konsekvens av ett beslut för en viss affärsmodell. I denna del av forskningen utvecklades en scenariobaserad analysmetod för att förstå under vilka förhållanden som affärsmodellen tillsammans med återtillverkning vore mer lukrativt för företaget – originaltillverkaren – och mindre kostsamt för användaren – kunden. För detta utvecklades en systematisk ansats för ekonomiska utvärderingar bestående av tre steg: (1) tillhandahåll en kostnadsöverblick för varje affärsmodell, (2) skapa scenarion genom att modifiera kostnadsdrivarna, och (3) kombinera scenarion för att uppnå synergieffekter. Med utgångspunkt i fallstudien utvecklades även faktorer för att forma krav för hur originaltillverkare kan initiera återtillverkning. Dessa faktorer delas upp i grundläggande och stödjande kravställningar, och de bygger tillsammans upp ett ramverk benämnt Återtillverkningsraketen. De grundläggande kravställningarna lyfter fram elementära krav vid utförandet av återtillverkning och om en av de fyra skulle saknas kan återtillverkning inte utföras på ett framgångsrikt sätt. De stödjande kravställningarna är av värde för att förbättra återtillverkningseffektiviteten genom exempelvis bekymmersfritt utförande av processer, organisationsförändringar, eller informationsutbyten. Därigenom, för att nå den fulla potentialen av återtillverkning, behövs både de grundläggande och de stödjande kravställningarna. Dessutom utforskades området för ekonomiska utvärderingsmetoder i en systematisk litteraturgenomgång för att identifiera insikter för att utveckla sådana metoder skräddarsydda för individuella originaltillverkare som initierar återtillverkning. För ändamålet föreslås sex perspektiv för att forma ekonomiska utvärderingsmetoder. Dessa täcker såväl systemgränserna för utvärderingarna som individuella behov och visioner hos originaltillverkare. För att vidare stödja företagen utvecklades ett ramverk för att välja ekonomiska utvärderingsmetoder för initieringar av återtillverkning baserat på användarvänlighet och förmåga att hantera komplexa datamängder. Slutligen föreslås det att tillämpa de framtagna kravställningarna tillsammans med ekonomisk utvärdering genom att iterativt undersöka möjligheterna för hur återtillverkning kan initieras för originaltillverkare. De grundläggande kravställningarna influerar upplägget för den första iterationen av den ekonomiska utvärderingen, vilken i sin tur nyttjas för att förfina hur de grundläggande kravställningarna kan läggas samman på ett ekonomiskt fördelaktigt sätt. När en godtagbar nivå uppnåtts kan ytterligare en iterativ process utföras mellan de stödjande kravställningarna och den ekonomiska värderingen. Genom att tillämpa det föreslagna tillvägagångssättet kan möjligheterna för återtillverkning undersökas på en detaljerad nivå innan initieringsförsök i praktiken, och såldes kan mängden slösade resurser minskas. Utöver detta integrerades det iterativa tillvägagångssättet med en 5-stegsansats för initiering av återtillverkning (5AFIR).

Download or read book Sustainable Manufacturing and Remanufacturing Management written by Weidong Li and published by Springer. This book was released on 2018-06-29 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on the latest research and applications in the fields of sustainable manufacturing and remanufacturing, as well as process planning and optimization technologies. It introduces innovative algorithms, methodologies, industrial case studies and applications. It focuses on two topics: sustainable manufacturing for machining technologies and remanufacturing of waste electronic equipment, and various methods are covered for each one, including macro process planning, dynamic scheduling, selective disassembly planning and cloud-based disassembly planning. The experimental analysis provided for every method explains the benefits, as well as how they are sustainable for various real-world applications. Further, a theoretical analysis and algorithm design is presented for each, accompanied by the contributors’ relevant research, including: • step-by-step guides; • application scenarios; • relevant literature surveys; • implementation details and case studies; and • critical reviews on the relevant technologies. This book is a valuable resource for researchers in sustainable manufacturing, remanufacturing and product lifecycle management communities, as well as practicing engineers and decision-makers in industry and all those interested in sustainable product development. It is also useful reading material for postgraduates and academics wanting to conduct relevant research, and a reference resource for manufacturing engineers developing innovative tools and methodologies.

Download or read book Handbook of Sustainable Engineering written by Joanne Kauffman and published by Springer. This book was released on 2013-04-30 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The efficient utilization of energy, sustainable use of natural resources, and large-scale adoption of sustainable technologies is the key to a sustainable future. The Handbook of Sustainable Engineering provides tools that will help us achieve these goals". Nobel Prize Winner Dr. R.K. Pachauri, Chairman, UN Intergovernmental Panel on Climate Change As global society confronts the challenges of diminishing resources, ecological degradation, and climate change, engineers play a crucial role designing and building technologies and products that fulfil our needs for utility and sustainability. The Handbook of Sustainable Engineering equips readers with the context and the best practices derived from both academic research and practical examples of successful implementations of sustainable technical solutions. The handbook’s content revolves around the two themes, new ways of thinking and new business models, including sustainable production, products, service systems and consumption while addressing key assets based on new materials, optimized resource management, and new energy sources. Contributions reflect a focus on state-of-the art insights into employing smart materials, recycling e-waste, water utilization, solar cells, product lifecycles, transportation and reverse manufacturing. Supportive of this, underlying issues such as engineering education, consumer behaviour and the regulatory climate complete the handbook’s comprehensive treatment of the problems and most promising solutions.

Download or read book Reverse Logistics written by Rommert Dekker and published by Springer Science & Business Media. This book was released on 2013-06-05 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses decision making in reverse logistics, which concerns the integration of used and obsolete products back into the supply chain as valuable resources. It covers a wide range of aspects, related to distribution, production and inventory management, and supply chain management. For each topic, it highlights key managerial issues in real-life examples and explains which quantitative models are available for addressing them. By treating a broad range of issues in a unified way, the book offers the reader a comprehensive view on the field of reverse logistics.

Download or read book Remanufacturing written by Rolf Steinhilper and published by . This book was released on 1998 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Closed Loop Supply Chains written by Mark E. Ferguson and published by CRC Press. This book was released on 2010-04-21 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: Closed-loop supply chain activities such as remanufacturing, recycling, dismantling for spare parts, and reverse logistics have helped many companies tap into new revenue streams by finding secondary markets for their products, all while reducing their overall carbon footprint. Written by academic experts, in language that is accessible to practitioners, this authoritative resource examines recent research and case studies of companies running profitable reuse/remanufacture operations in various industries. It illustrates profitable practices in returned and recovered products, clearly explaining how to: design a reverse logistics network, conduct production planning, implement effective marketing strategies, and apply closed-loop supply chain strategies in industries besides manufacturing. From product development to materials to assembly and profitability, this complete resource explores the impact of these processes across all aspects of the supply chain.

Download or read book Advances in Remanufacturing written by Marcello Fera and published by Springer Nature. This book was released on with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Responsible Manufacturing written by Ammar Y. Alqahtani and published by CRC Press. This book was released on 2019-02-25 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Responsible Manufacturing has become an obligation to the environment and to society itself, enforced primarily by customer perspective and governmental regulations on environmental issues. This is mainly driven by the escalating deterioration of the environment, such as diminishing raw material resources, overflowing waste sites, and increasing levels of pollution. Responsible Manufacturing related issues have found a large following in industry and academia, which aim to find solutions to the problems that arise in this newly emerged research area. Problems are widespread, including the ones related to the lifecycle of products, disassembly, material recovery, remanufacturing, and pollution prevention. Organized into sixteen chapters, this book provides a foundation for academicians and practitioners, and addresses several important issues faced by strategic, tactical, and operation planners of Responsible Manufacturing. Using efficient models in a variety of decision-making situations, it provides easy-to-use mathematical and/or simulation modeling-based solution methodologies for the majority of the issues. Features Addresses a variety of state-of-the-art issues in Responsible Manufacturing Highlights how popular industrial engineering and operations research techniques can be effectively exploited to find the most effective solutions to problems Presents how a specific issue can be approached or modeled in a given decision-making situation Covers strategic, tactical, and operational systems issues Provides a foundation for academicians and practitioners interested in building bodies of knowledge in this new and fast-growing area

Download or read book Towards Lean Remanufacturing written by Jelena Kurilova-Pališaitien? and published by Linköping University Electronic Press. This book was released on 2015-05-25 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Remanufacturing is an environmentally sound material recovery option which is essential to compete for sustainable manufacturing. The aim with remanufacturing at a majority of companies is to prolong physical product performance by delivering the same or betterthan-original product quality. In general, remanufacturing is an industrial process that brings used products back to useful life by requiring less effort than is demanded by the initial production process. Consequently, from a product life-cycle perspective, remanufacturing generates great product value. Remanufacturers lag behind manufacturers since they often face complex and unpredictable material and information flows. Based on a review of remanufacturing research, remanufacturing challenges in material and information flows can be classified into three groups: insufficient product quality, long and unstable process lead times, and an unpredictable level of inventory. While some remanufacturing researchers state that manufacturing and remanufacturing are significantly different, they have more in common than many other processes operations. Therefore, to sustain competitive remanufacturing, companies investigate an opportunity for improvement through the employment of lean production that generates significant benefits for manufacturers. In order to investigate the potential to address remanufacturing challenges by lean production, a Minimum time for material and information flow analysis (MiniMifa) method was developed. This method originates from the value stream mapping (VSM) method, broadly practiced to bring lean to manufacturing companies. The focus of MiniMifa was to collect empirical data on the identified groups of remanufacturing challenges from the remanufacturing perspective, and to provide a basis for the development of improvements originating from lean principles. Lean production was selected for this research due to its system perspective on material and information flows. Among the defined lean principles in remanufacturing, a pull principle was investigated at the case companies. The suggested principle demonstrated a reduction in lead time, followed by improvements in inventory level and product quality. However, in order to become lean, remanufacturers have to overcome three levels of lean remanufacturing challenges: external and internal challenges as well as lean wastes. Finally, this research reduces the gap between academia and industry by contributing with a possible solution to the identified remanufacturing challenges in material and information flows.

Download or read book Remanufacturing written by Robert T. Lund and published by . This book was released on 1984 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sustainability in Remanufacturing Operations written by Paulina Golinska-Dawson and published by Springer. This book was released on 2017-07-14 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present customers’ consumption models result in an increasing number of used products that need to be collected and reused or disposed. Remanufacturing is a favourable scenario in order to recover the end-of-use products. It allows to capture substantial part of the resources which were used in the primary production at lower cost, providing economic, environmental and social benefits. The book presents the methods, models, case studies for improvement of sustainability in remanufacturing facilities. The focus is on small- and medium-sized enterprises and their challenges to meet resource-efficiency goal.

Download or read book Handbook of Manufacturing Engineering and Technology written by Andrew Y. C. Nee and published by Springer. This book was released on 2014-10-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Springer Reference Work Handbook of Manufacturing Engineering and Technology provides overviews and in-depth and authoritative analyses on the basic and cutting-edge manufacturing technologies and sciences across a broad spectrum of areas. These topics are commonly encountered in industries as well as in academia. Manufacturing engineering curricula across universities are now essential topics covered in major universities worldwide.

Download or read book Design for Innovative Value Towards a Sustainable Society written by Mitsutaka Matsumoto and published by Springer Science & Business Media. This book was released on 2012-04-03 with total page 1152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first EcoDesign International Symposium held in 1999, this symposium has led the research and practices of environmentally conscious design of products, services, manufacturing systems, supply chain, consumption, as well as economics and society. EcoDesign 2011 - the 7th International Symposium on Environmentally Conscious Design and Inverse Manufacturing - was successfully held in the Japanese old capital city of Kyoto, on November 30th – December 2nd, 2011. The subtitle of EcoDesign 2011 is to “design for value innovation towards sustainable society.” During this event, presenters discussed the way to achieve both drastic environmental consciousness and value innovation in order to realise a sustainable society.

Download or read book Waste to Wealth written by Peter Lacy and published by Springer. This book was released on 2016-04-30 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waste to Wealth proves that 'green' and 'growth' need not be binary alternatives. The book examines five new business models that provide circular growth from deploying sustainable resources to the sharing economy before setting out what business leaders need to do to implement the models successfully.

Download or read book Environment Conscious Manufacturing written by Surendra M. Gupta and published by CRC Press. This book was released on 2007-12-19 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hotter temperatures, less arctic ice, loss of habitat-every other day, it seems, global warming and environmental issues make headlines. Consumer-driven environmental awareness combined with stricter recycling regulations have put the pressure on companies to produce and dispose of products in an environmentally responsible manner. Redefining indus