Download or read book Federal Motor Vehicle Safety Standards Rear Visibility Us National Highway Traffic Safety Administration Regulation Nhtsa 2018 Edition written by The Law The Law Library and published by Createspace Independent Publishing Platform. This book was released on 2018-11-14 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: Federal Motor Vehicle Safety Standards - Rear Visibility (US National Highway Traffic Safety Administration Regulation) (NHTSA) (2018 Edition) The Law Library presents the complete text of the Federal Motor Vehicle Safety Standards - Rear Visibility (US National Highway Traffic Safety Administration Regulation) (NHTSA) (2018 Edition). Updated as of May 29, 2018 To reduce the risk of devastating backover crashes involving vulnerable populations (including very young children) and to satisfy the mandate of the Cameron Gulbransen Kids Transportation Safety Act of 2007, NHTSA is issuing this final rule to expand the required field of view for all passenger cars, trucks, multipurpose passenger vehicles, buses, and low-speed vehicles with a gross vehicle weight of less than 10,000 pounds. The agency anticipates that today's final rule will significantly reduce backover crashes involving children, persons with disabilities, the elderly, and other pedestrians who currently have the highest risk associated with backover crashes. Specifically, today's final rule specifies an area behind the vehicle which must be visible to the driver when the vehicle is placed into reverse and other related performance requirements. The agency anticipates that, in the near term, vehicle manufacturers will use rearview video systems and in-vehicle visual displays to meet the requirements of this final rule. This book contains: - The complete text of the Federal Motor Vehicle Safety Standards - Rear Visibility (US National Highway Traffic Safety Administration Regulation) (NHTSA) (2018 Edition) - A table of contents with the page number of each section
Download or read book International Encyclopedia of Transportation written by and published by Elsevier. This book was released on 2021-05-13 with total page 4418 pages. Available in PDF, EPUB and Kindle. Book excerpt: In an increasingly globalised world, despite reductions in costs and time, transportation has become even more important as a facilitator of economic and human interaction; this is reflected in technical advances in transportation systems, increasing interest in how transportation interacts with society and the need to provide novel approaches to understanding its impacts. This has become particularly acute with the impact that Covid-19 has had on transportation across the world, at local, national and international levels. Encyclopedia of Transportation, Seven Volume Set - containing almost 600 articles - brings a cross-cutting and integrated approach to all aspects of transportation from a variety of interdisciplinary fields including engineering, operations research, economics, geography and sociology in order to understand the changes taking place. Emphasising the interaction between these different aspects of research, it offers new solutions to modern-day problems related to transportation. Each of its nine sections is based around familiar themes, but brings together the views of experts from different disciplinary perspectives. Each section is edited by a subject expert who has commissioned articles from a range of authors representing different disciplines, different parts of the world and different social perspectives. The nine sections are structured around the following themes: Transport Modes; Freight Transport and Logistics; Transport Safety and Security; Transport Economics; Traffic Management; Transport Modelling and Data Management; Transport Policy and Planning; Transport Psychology; Sustainability and Health Issues in Transportation. Some articles provide a technical introduction to a topic whilst others provide a bridge between topics or a more future-oriented view of new research areas or challenges. The end result is a reference work that offers researchers and practitioners new approaches, new ways of thinking and novel solutions to problems. All-encompassing and expertly authored, this outstanding reference work will be essential reading for all students and researchers interested in transportation and its global impact in what is a very uncertain world. Provides a forward looking and integrated approach to transportation Updated with future technological impacts, such as self-driving vehicles, cyber-physical systems and big data analytics Includes comprehensive coverage Presents a worldwide approach, including sets of comparative studies and applications
Download or read book Automated Driving Systems 2 0 written by U. S. Department Of Transportation and published by Createspace Independent Publishing Platform. This book was released on 2018-07-25 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: "A Vision for Safety replaces the Federal Automated Vehicle Policy released in 2016. This updated policy framework offers a path forward for the safe deployment of automated vehicles by: encouraging new entrants and ideas that deliver safer vehicles; making Department regulatory processes more nimble to help match the pace of private sector innovation; and supporting industry innovation and encouraging open communication with the public and with stakeholders."--Introductory message.
Download or read book National Agenda for Motorcycle Safety written by United States. National Highway Traffic Safety Administration and published by . This book was released on 2000 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Autonomous Vehicle Technology written by James M. Anderson and published by Rand Corporation. This book was released on 2014-01-10 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry appears close to substantial change engendered by “self-driving” technologies. This technology offers the possibility of significant benefits to social welfare—saving lives; reducing crashes, congestion, fuel consumption, and pollution; increasing mobility for the disabled; and ultimately improving land use. This report is intended as a guide for state and federal policymakers on the many issues that this technology raises.
Download or read book Cost Effectiveness and Deployment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2015-09-28 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: The light-duty vehicle fleet is expected to undergo substantial technological changes over the next several decades. New powertrain designs, alternative fuels, advanced materials and significant changes to the vehicle body are being driven by increasingly stringent fuel economy and greenhouse gas emission standards. By the end of the next decade, cars and light-duty trucks will be more fuel efficient, weigh less, emit less air pollutants, have more safety features, and will be more expensive to purchase relative to current vehicles. Though the gasoline-powered spark ignition engine will continue to be the dominant powertrain configuration even through 2030, such vehicles will be equipped with advanced technologies, materials, electronics and controls, and aerodynamics. And by 2030, the deployment of alternative methods to propel and fuel vehicles and alternative modes of transportation, including autonomous vehicles, will be well underway. What are these new technologies - how will they work, and will some technologies be more effective than others? Written to inform The United States Department of Transportation's National Highway Traffic Safety Administration (NHTSA) and Environmental Protection Agency (EPA) Corporate Average Fuel Economy (CAFE) and greenhouse gas (GHG) emission standards, this new report from the National Research Council is a technical evaluation of costs, benefits, and implementation issues of fuel reduction technologies for next-generation light-duty vehicles. Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles estimates the cost, potential efficiency improvements, and barriers to commercial deployment of technologies that might be employed from 2020 to 2030. This report describes these promising technologies and makes recommendations for their inclusion on the list of technologies applicable for the 2017-2025 CAFE standards.
Download or read book Effectiveness and Impact of Corporate Average Fuel Economy CAFE Standards written by National Research Council and published by National Academies Press. This book was released on 2002-01-29 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since CAFE standards were established 25 years ago, there have been significant changes in motor vehicle technology, globalization of the industry, the mix and characteristics of vehicle sales, production capacity, and other factors. This volume evaluates the implications of these changes as well as changes anticipated in the next few years, on the need for CAFE, as well as the stringency and/or structure of the CAFE program in future years.
Download or read book Measuring Automated Vehicle Safety written by Laura Fraade-Blanar and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a framework for measuring safety in automated vehicles (AVs): how to define safety for AVs, how to measure safety for AVs, and how to communicate what is learned or understood about AVs.
Download or read book Speed Management written by European Conference of Ministers of Transport and published by OECD Publishing. This book was released on 2006 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Report addresses the key issues surrounding traffic speed management and highlights the improvements in policy and operations needed to reduce the extent of speeding.
Download or read book Ten Thousand Commandments written by Clyde Wayne Crews and published by Cato Institute. This book was released on 2004 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Assessment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2011-06-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.
Download or read book Car Safety Wars written by Michael R. Lemov and published by Rowman & Littlefield. This book was released on 2015-03-19 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Car Safety Wars is a gripping history of the hundred-year struggle to improve the safety of American automobiles and save lives on the highways. Described as the “equivalent of war” by the Supreme Court, the battle involved the automobile industry, unsung and long-forgotten safety heroes, at least six US Presidents, a reluctant Congress, new auto technologies, and, most of all, the mindset of the American public: would they demand and be willing to pay for safer cars? The “Car Safety Wars” were at first won by consumers and safety advocates. The major victory was the enactment in 1966 of a ground breaking federal safety law. The safety act was pushed through Congress over the bitter objections of car manufacturers by a major scandal involving General Motors, its private detectives, Ralph Nader, and a gutty cigar-chomping old politician. The act is a success story for government safety regulation. It has cut highway death and injury rates by over seventy percent in the years since its enactment, saving more than two million lives and billions of taxpayer dollars. But the car safety wars have never ended. GM has recently been charged with covering up deadly defects resulting in multiple ignition switch shut offs. Toyota has been fined for not reporting fatal unintended acceleration in many models. Honda and other companies have—for years—sold cars incorporating defective air bags. These current events, suggesting a failure of safety regulation, may serve to warn us that safety laws and agencies created with good intentions can be corrupted and strangled over time. This book suggests ways to avoid this result, but shows that safer cars and highways are a hard road to travel. We are only part of the way home.
Download or read book A Smarter National Surveillance System for Occupational Safety and Health in the 21st Century written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2018-04-27 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: The workplace is where 156 million working adults in the United States spend many waking hours, and it has a profound influence on health and well-being. Although some occupations and work-related activities are more hazardous than others and face higher rates of injuries, illness, disease, and fatalities, workers in all occupations face some form of work-related safety and health concerns. Understanding those risks to prevent injury, illness, or even fatal incidents is an important function of society. Occupational safety and health (OSH) surveillance provides the data and analyses needed to understand the relationships between work and injuries and illnesses in order to improve worker safety and health and prevent work-related injuries and illnesses. Information about the circumstances in which workers are injured or made ill on the job and how these patterns change over time is essential to develop effective prevention programs and target future research. The nation needs a robust OSH surveillance system to provide this critical information for informing policy development, guiding educational and regulatory activities, developing safer technologies, and enabling research and prevention strategies that serves and protects all workers. A Smarter National Surveillance System for Occupational Safety and Health in the 21st Century provides a comprehensive assessment of the state of OSH surveillance. This report is intended to be useful to federal and state agencies that have an interest in occupational safety and health, but may also be of interest broadly to employers, labor unions and other worker advocacy organizations, the workers' compensation insurance industry, as well as state epidemiologists, academic researchers, and the broader public health community. The recommendations address the strengths and weaknesses of the envisioned system relative to the status quo and both short- and long-term actions and strategies needed to bring about a progressive evolution of the current system.
Download or read book Transportation Energy Data Book written by and published by . This book was released on 2005 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Greenhouse Gas Emissions Standards and Fuel Efficiency Standards for Medium and Heavy duty Engines and Vehicles written by and published by . This book was released on 2012 with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Importing Into the United States written by U. S. Customs and Border Protection and published by . This book was released on 2015-10-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explains process of importing goods into the U.S., including informed compliance, invoices, duty assessments, classification and value, marking requirements, etc.
Download or read book Automated Vehicles are Probably Legal in the United States written by Bryant Walker Smith and published by Createspace Independent Publishing Platform. This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Note: This is the original 2012 report. An updated 2014 law review article is available as 1 Tex. A&M. L. Rev. 411. This report provides the most comprehensive discussion to date of whether so-called automated, autonomous, self-driving, or driverless vehicles can be lawfully sold and used on public roads in the United States. The short answer is that the computer direction of a motor vehicle's steering, braking, and accelerating without real-time human input is probably legal. The long answer, contained in the report, provides a foundation for tailoring regulations and understanding liability issues related to these vehicles. The report's largely descriptive analysis, which begins with the principle that everything is permitted unless prohibited, covers three key legal regimes: the 1949 Geneva Convention on Road Traffic, regulations enacted by the National Highway Traffic Safety Administration (NHTSA), and the vehicle codes of all fifty US states. The Geneva Convention, to which the United States is a party, probably does not prohibit automated driving. The treaty promotes road safety by establishing uniform rules, one of which requires every vehicle or combination thereof to have a driver who is "at all times ... able to control" it. However, this requirement is likely satisfied if a human is able to intervene in the automated vehicle's operation. NHTSA's regulations, which include the Federal Motor Vehicle Safety Standards to which new vehicles must be certified, do not generally prohibit or uniquely burden automated vehicles, with the possible exception of one rule regarding emergency flashers. State vehicle codes probably do not prohibit-but may complicate-automated driving. These codes assume the presence of licensed human drivers who are able to exercise human judgment, and particular rules may functionally require that presence. New York somewhat uniquely directs a driver to keep one hand on the wheel at all times. In addition, far more common rules mandating reasonable, prudent, practicable, and safe driving have uncertain application to automated vehicles and their users. Following distance requirements may also restrict the lawful operation of tightly spaced vehicle platoons. Many of these issues arise even in the three states that expressly regulate automated vehicles. The primary purpose of this report is to assess the current legal status of automated vehicles. However, the report includes draft language for US states that wish to clarify this status. It also recommends five near-term measures that may help increase legal certainty without producing premature regulation. First, regulators and standards organizations should develop common vocabularies and definitions that are useful in the legal, technical, and public realms. Second, the United States should closely monitor efforts to amend or interpret the 1969 Vienna Convention, which contains language similar to the Geneva Convention but does not bind the United States. Third, NHTSA should indicate the likely scope and schedule of potential regulatory action. Fourth, US states should analyze how their vehicle codes would or should apply to automated vehicles, including those that have an identifiable human operator and those that do not. Finally, additional research on laws applicable to trucks, buses, taxis, low-speed vehicles, and other specialty vehicles may be useful. This is in addition to ongoing research into the other legal aspects of vehicle automation.