Download or read book Fault Tree Handbook U S Nuclear Regulatory Commission Nureg 0492 written by and published by . This book was released on 1998* with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fault Tree Handbook written by U S Nuclear Regulatory Commission and published by www.Militarybookshop.CompanyUK. This book was released on 2012-11 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since 1975, a short course entitled "System Safety and Reliability Analysis" has been presented to over 200 NRC personnel and contractors. The course has been taught jointly by David F. Haasl, Institute of System Sciences, Professor Norman H. Roberts, University of Washington, and 'members of the Probabilistic Analysis Staff, NRC, as part of a risk assessment training program sponsored by the Probabilistic Analysis Staff. This handbook has been developed not only to serve as text for the System Safety and Reliability Course, but also to make available to others a set of otherwise undocumented material on fault tree construction and evaluation. The publication of this handbook is in accordance with the recommendations of the Risk Assessment Review Group Report (NUREG/CR-0400) in which it was stated that the fault/event tree methodology both can and should be used more widely by the NRC. It is hoped that this document will help to codify and systematize the fault tree approach to systems analysis.
Download or read book Fault Tree Handbook written by and published by . This book was released on 1981 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fault Tree Handbook written by W. E. Vesely and published by . This book was released on 1981 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Reliability Engineering written by Hoang Pham and published by Springer Science & Business Media. This book was released on 2006-04-12 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: An effective reliability programme is an essential component of every product's design, testing and efficient production. From the failure analysis of a microelectronic device to software fault tolerance and from the accelerated life testing of mechanical components to hardware verification, a common underlying philosophy of reliability applies. Defining both fundamental and applied work across the entire systems reliability arena, this state-of-the-art reference presents methodologies for quality, maintainability and dependability. Featuring: Contributions from 60 leading reliability experts in academia and industry giving comprehensive and authoritative coverage. A distinguished international Editorial Board ensuring clarity and precision throughout. Extensive references to the theoretical foundations, recent research and future directions described in each chapter. Comprehensive subject index providing maximum utility to the reader. Applications and examples across all branches of engineering including IT, power, automotive and aerospace sectors. The handbook's cross-disciplinary scope will ensure that it serves as an indispensable tool for researchers in industrial, electrical, electronics, computer, civil, mechanical and systems engineering. It will also aid professional engineers to find creative reliability solutions and management to evaluate systems reliability and to improve processes. For student research projects it will be the ideal starting point whether addressing basic questions in communications and electronics or learning advanced applications in micro-electro-mechanical systems (MEMS), manufacturing and high-assurance engineering systems.
Download or read book Proceedings of the U S Nuclear Regulatory Commission Water Reactor Safety Research Information Meeting written by and published by . This book was released on 1981 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fault Tree Analysis written by and published by . This book was released on 2000 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains references to documents in the NASA Scientific and Technical Information (STI) Database.
Download or read book Nuclear Energy written by Raymond L. Murray and published by Butterworth-Heinemann. This book was released on 2001 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy -- Atoms and nuclei -- Radioactivity -- Nuclear processes -- Radiation and materials -- Fission -- Fusion -- Particle accelerators -- Isotope separators -- Radiation detectors -- Neutron chain reactions -- Nuclear heat energy -- Breeder reactors -- Fusion reactors -- The history of nuclear energy -- Biological effects of radiation -- Information from isotopes -- Useful radiation effects -- Reactor safety -- Nuclear propulsion -- Radiation protection -- Radioactive waste disposal -- Laws, regulations, and organizations -- Energy economics -- International nuclear power -- Nuclear explosions -- The future.
Download or read book Design for Maintainability written by Louis J. Gullo and published by John Wiley & Sons. This book was released on 2021-03-26 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: How to design for optimum maintenance capabilities and minimize the repair time Design for Maintainability offers engineers a wide range of tools and techniques for incorporating maintainability into the design process for complex systems. With contributions from noted experts on the topic, the book explains how to design for optimum maintenance capabilities while simultaneously minimizing the time to repair equipment. The book contains a wealth of examples and the most up-to-date maintainability design practices that have proven to result in better system readiness, shorter downtimes, and substantial cost savings over the entire system life cycle, thereby, decreasing the Total Cost of Ownership. Design for Maintainability offers a wealth of design practices not covered in typical engineering books, thus allowing readers to think outside the box when developing maintainability design requirements. The book's principles and practices can help engineers to dramatically improve their ability to compete in global markets and gain widespread customer satisfaction. This important book: Offers a complete overview of maintainability engineering as a system engineering discipline Includes contributions from authors who are recognized leaders in the field Contains real-life design examples, both good and bad, from various industries Presents realistic illustrations of good maintainability design principles Provides discussion of the interrelationships between maintainability with other related disciplines Explores trending topics in technologies Written for design and logistics engineers and managers, Design for Maintainability is a comprehensive resource containing the most reliable and innovative techniques for improving maintainability when designing a system or product.
Download or read book System Reliability Theory written by Marvin Rausand and published by John Wiley & Sons. This book was released on 2020-10-20 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook and reference for industrial statisticians and system reliability engineers System Reliability Theory: Models, Statistical Methods, and Applications, Third Edition presents an updated and revised look at system reliability theory, modeling, and analytical methods. The new edition is based on feedback to the second edition from numerous students, professors, researchers, and industries around the world. New sections and chapters are added together with new real-world industry examples, and standards and problems are revised and updated. System Reliability Theory covers a broad and deep array of system reliability topics, including: · In depth discussion of failures and failure modes · The main system reliability assessment methods · Common-cause failure modeling · Deterioration modeling · Maintenance modeling and assessment using Python code · Bayesian probability and methods · Life data analysis using R Perfect for undergraduate and graduate students taking courses in reliability engineering, this book also serves as a reference and resource for practicing statisticians and engineers. Throughout, the book has a practical focus, incorporating industry feedback and real-world industry problems and examples.
Download or read book Chemical Engineering and Chemical Process Technology Volume IV written by Ryzhard Pohorecki and published by EOLSS Publications. This book was released on 2010-11-30 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering and Chemical Process Technology is a theme component of Encyclopedia of Chemical Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty Encyclopedias. Chemical engineering is a branch of engineering, dealing with processes in which materials undergo changes in their physical or chemical state. These changes may concern size, energy content, composition and/or other application properties. Chemical engineering deals with many processes belonging to chemical industry or related industries (petrochemical, metallurgical, food, pharmaceutical, fine chemicals, coatings and colors, renewable raw materials, biotechnological, etc.), and finds application in manufacturing of such products as acids, alkalis, salts, fuels, fertilizers, crop protection agents, ceramics, glass, paper, colors, dyestuffs, plastics, cosmetics, vitamins and many others. It also plays significant role in environmental protection, biotechnology, nanotechnology, energy production and sustainable economical development. The Theme on Chemical Engineering and Chemical Process Technology deals, in five volumes and covers several topics such as: Fundamentals of Chemical Engineering; Unit Operations – Fluids; Unit Operations – Solids; Chemical Reaction Engineering; Process Development, Modeling, Optimization and Control; Process Management; The Future of Chemical Engineering; Chemical Engineering Education; Main Products, which are then expanded into multiple subtopics, each as a chapter. These five volumes are aimed at the following five major target audiences: University and College students Educators, Professional practitioners, Research personnel and Policy analysts, managers, and decision makers and NGOs.
Download or read book Design and Safety Assessment of Critical Systems written by Marco Bozzano and published by CRC Press. This book was released on 2010-11-12 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety-critical systems, by definition those systems whose failure can cause catastrophic results for people, the environment, and the economy, are becoming increasingly complex both in their functionality and their interactions with the environment. Unfortunately, safety assessments are still largely done manually, a time-consuming and error-prone
Download or read book Reliability Engineering written by Mangey Ram and published by CRC Press. This book was released on 2019-10-14 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last 50 years, the theory and the methods of reliability analysis have developed significantly. Therefore, it is very important to the reliability specialist to be informed of each reliability measure. This book will provide historical developments, current advancements, applications, numerous examples, and many case studies to bring the reader up-to-date with the advancements in this area. It covers reliability engineering in different branches, includes applications to reliability engineering practice, provides numerous examples to illustrate the theoretical results, and offers case studies along with real-world examples. This book is useful to engineering students, research scientist, and practitioners working in the field of reliability.
Download or read book Risk Assessment written by Marvin Rausand and published by John Wiley & Sons. This book was released on 2020-03-31 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces risk assessment with key theories, proven methods, and state-of-the-art applications Risk Assessment: Theory, Methods, and Applications remains one of the few textbooks to address current risk analysis and risk assessment with an emphasis on the possibility of sudden, major accidents across various areas of practice—from machinery and manufacturing processes to nuclear power plants and transportation systems. Updated to align with ISO 31000 and other amended standards, this all-new 2nd Edition discusses the main ideas and techniques for assessing risk today. The book begins with an introduction of risk analysis, assessment, and management, and includes a new section on the history of risk analysis. It covers hazards and threats, how to measure and evaluate risk, and risk management. It also adds new sections on risk governance and risk-informed decision making; combining accident theories and criteria for evaluating data sources; and subjective probabilities. The risk assessment process is covered, as are how to establish context; planning and preparing; and identification, analysis, and evaluation of risk. Risk Assessment also offers new coverage of safe job analysis and semi-quantitative methods, and it discusses barrier management and HRA methods for offshore application. Finally, it looks at dynamic risk analysis, security and life-cycle use of risk. Serves as a practical and modern guide to the current applications of risk analysis and assessment, supports key standards, and supplements legislation related to risk analysis Updated and revised to align with ISO 31000 Risk Management and other new standards and includes new chapters on security, dynamic risk analysis, as well as life-cycle use of risk analysis Provides in-depth coverage on hazard identification, methodologically outlining the steps for use of checklists, conducting preliminary hazard analysis, and job safety analysis Presents new coverage on the history of risk analysis, criteria for evaluating data sources, risk-informed decision making, subjective probabilities, semi-quantitative methods, and barrier management Contains more applications and examples, new and revised problems throughout, and detailed appendices that outline key terms and acronyms Supplemented with a book companion website containing Solutions to problems, presentation material and an Instructor Manual Risk Assessment: Theory, Methods, and Applications, Second Edition is ideal for courses on risk analysis/risk assessment and systems engineering at the upper-undergraduate and graduate levels. It is also an excellent reference and resource for engineers, researchers, consultants, and practitioners who carry out risk assessment techniques in their everyday work.
Download or read book Radiation Safety written by Haydee Domenech and published by Springer. This book was released on 2016-08-27 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses important fundamentals of radiation safety with specific details on dose units, calculations, measuring, and biological effects of ionizing radiation. The author covers different exposure situations and their requirements, and relevant legislation and regulations governing radiation safety. The book also examines radioactive waste management, the transport of radioactive materials, emergency planning and preparedness and various examples of radiation protection programs for industrial, medical, and academic applications.
Download or read book System Safety Engineering and Risk Assessment written by Nicholas J. Bahr and published by CRC Press. This book was released on 2018-10-08 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: We all know that safety should be an integral part of the systems that we build and operate. The public demands that they are protected from accidents, yet industry and government do not always know how to reach this common goal. This book gives engineers and managers working in companies and governments around the world a pragmatic and reasonable approach to system safety and risk assessment techniques. It explains in easy-to-understand language how to design workable safety management systems and implement tested solutions immediately. The book is intended for working engineers who know that they need to build safe systems, but aren’t sure where to start. To make it easy to get started quickly, it includes numerous real-life engineering examples. The book’s many practical tips and best practices explain not only how to prevent accidents, but also how to build safety into systems at a sensible price. The book also includes numerous case studies from real disasters that describe what went wrong and the lessons learned. See What’s New in the Second Edition: New chapter on developing government safety oversight programs and regulations, including designing and setting up a new safety regulatory body, developing safety regulatory oversight functions and governance, developing safety regulations, and how to avoid common mistakes in government oversight Significantly expanded chapter on safety management systems, with many practical applications from around the world and information about designing and building robust safety management systems, auditing them, gaining internal support, and creating a safety culture New and expanded case studies and "Notes from Nick’s Files" (examples of practical applications from the author’s extensive experience) Increased international focus on world-leading practices from multiple industries with practical examples, common mistakes to avoid, and new thinking about how to build sustainable safety management systems New material on safety culture, developing leading safety performance indicators, safety maturity model, auditing safety management systems, and setting up a safety knowledge management system
Download or read book Handbook of Performability Engineering written by Krishna B. Misra and published by Springer Science & Business Media. This book was released on 2008-08-24 with total page 1331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dependability and cost effectiveness are primarily seen as instruments for conducting international trade in the free market environment. These factors cannot be considered in isolation of each other. This handbook considers all aspects of performability engineering. The book provides a holistic view of the entire life cycle of activities of the product, along with the associated cost of environmental preservation at each stage, while maximizing the performance.
