Download or read book Fault Tolerant Real Time Scheduling for Multiprocessor Systems written by Rakesh K Bansal and published by LAP Lambert Academic Publishing. This book was released on 2011-01 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Owing to advances in VLSI and other related technologies, real-time systems have come to an age where their presence is being felt in almost every facet of human life.There is a steady rising trend in the fraction of all processors, manufactured worldwide, that find their way to real-time applications. Most of these time and mission critical applications demand reliable processing environment to guarantee error free execution and completion within the respective time deadlines. Scheduling algorithms can provide low-cost solutions to fault-tolerance and graceful performance degradation by exploiting tradeoffs between space or time redundancy, timing accuracy, and quality of service. The intricacies of Primary- Backup fault-tolerance approach that works fine for independent task scheduling are explored for DAG structured applications through examples. This work contributes toward understanding and analyzing fault-tolerance issue for precedence-constrained real-time applications, on homogeneous and heterogeneous multiprocessing platforms, and developing a new 100% 1-fault-tolerant algorithm in this much desirable and critical research area.

Download or read book Fault Tolerant Scheduling for Multiprocessor Systems written by Gangadhar Mahanthi and published by . This book was released on 1992 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Resource Management in Real time Systems and Networks written by C. Siva Ram Murthy and published by MIT Press. This book was released on 2001 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the concepts and state-of-the-art research developments of resource management in real-time systems and networks. Real-time systems and networks are of increasing importance in many applications, including automated factories, telecommunication systems, defense systems, and space systems. This book introduces the concepts and state-of-the-art research developments of resource management in real-time systems and networks. Unlike other texts in the field, it covers the entire spectrum of issues in resource management, including task scheduling in uniprocessor real-time systems; task scheduling, fault-tolerant task scheduling, and resource reclaiming in multiprocessor real-time systems; conventional task scheduling and object-based task scheduling in distributed real-time systems; message scheduling; QoS routing; dependable communication; multicast communication; and medium access protocols in real-time networks. It provides algorithmic treatments for all of the issues addressed, highlighting the intuition behind each algorithm and giving examples. The book also includes two chapters of case studies.

Download or read book Fault tolerant Scheduling of Real time Multiple Processor Systems written by Mohamad Rooholamini and published by . This book was released on 1997 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Fault Tolerance Distributed Real Time System Design and Implementation written by Amira Sallow and published by GRIN Verlag. This book was released on 2014-03-11 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: Doctoral Thesis / Dissertation from the year 2013 in the subject Computer Science - General, grade: 90, University of Mosul (College of Computer Sciences And Mathematics), language: English, abstract: Now a day completed real-time systems are distributed. One of the working area of real-time scheduling is distributed scheduling. Task scheduling in distributed systems is dealt with two levels: on the level of each processor (local scheduling), and on the level of the allocation of tasks to processors (global scheduling). In this thesis, a distributed real-time system with fault tolerance has been designed and called Fault Tolerance Distributed Real Time System FTDRTS. The system consists of heterogeneous processors act as servers and clients connected together via LAN communication network. This system has two types of scheduling schemes: (1) global model scheduling, (2) independent model scheduling for scheduling tasks in real time distributed manner. The time utility function TUF has been developed and called the DTUF (Developed TUF) function. This function gives another dimension and used to priorities’ tasks, based on whether they are Urgent or Important, or both, or neither. A fault tolerance protocol called DRT-FTIP (Distributed Real Time – Fault Tolerance Integrity Protocol) has been developed. This protocol increases the integrity of the scheduling in distributed real time systems. The proposed Distributed Real-Time system with its scheduling algorithms and integrity protocol have been designed using the Java Remote Method Invocation (RMI) and use the Flight Reservation System as a case study. The simulation results of this proposed distributed realtime system using global scheduling algorithm gives Deadline Satisfaction Ratio (DSR) equal 95%. While Accrued Utility Ratio (AUR) equal 0.7286.

Download or read book Formal Analysis of Fault Tolerant Real Time Multiprocessor Allocation and Scheduling Protocols written by Nikhil Kumar Varma and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Multiprocessor Scheduling for Real Time Systems written by Sanjoy Baruah and published by Springer. This book was released on 2015-01-02 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of both theoretical and pragmatic aspects of resource-allocation and scheduling in multiprocessor and multicore hard-real-time systems. The authors derive new, abstract models of real-time tasks that capture accurately the salient features of real application systems that are to be implemented on multiprocessor platforms, and identify rules for mapping application systems onto the most appropriate models. New run-time multiprocessor scheduling algorithms are presented, which are demonstrably better than those currently used, both in terms of run-time efficiency and tractability of off-line analysis. Readers will benefit from a new design and analysis framework for multiprocessor real-time systems, which will translate into a significantly enhanced ability to provide formally verified, safety-critical real-time systems at a significantly lower cost.

Download or read book Fault tolerant Real time Multiprocessor Scheduling written by Anand Srinivasan and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fault Tolerant Real Time Heterogeneous Distributed System written by Aser Avinash Ekka and published by LAP Lambert Academic Publishing. This book was released on 2011-12 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault-tolerance becomes an important key to establish dependability in Real Time Distributed Systems (RTDS). In fault-tolerant Real Time Distributed systems, detection of fault and its recovery should be executed in timely manner so that in spite of fault occurrences the intended output of real-time computations always take place on time. Hardware and software redundancy are well-known effective methods for fault tolerance, where extra hard ware (e.g., processors, communication links) and software (e.g., tasks, messages) are added into the system to deal with faults. Performances of RTDS are mostly guided by efficiency of scheduling algorithm and schedulability analyses are performed on the system to ensure the timing constrains. Fault tolerance can be achieved by scheduling additional ghost copies in addition to the primary copy of the task. The method proposed here extends the traditional distributed recovery block (DRB) based fault tolerant scheduling approach for real time tasks. Our algorithms are mostly based on software redundancy, and ensures that the parallel updating of backup task works better in case of transient overload and handles permanent, transient and timing fau

Download or read book Fault tolerant Task Scheduling in Multiprocessor Systems written by Alan A. Bertossi and published by . This book was released on 1991 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulation studies are used to reveal interesting trade-offs associated with the scheduling algorithm.

Download or read book Fault Tolerance and Scheduling Issues in Multiprocessor Systems written by Theodora A. Varvarigou and published by . This book was released on 1991 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy efficient Fault Tolerance in Multiprocessor Real time Systems written by Yifeng Guo and published by . This book was released on 2013 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recent progress in the multiprocessor/multicore systems has important implications for real-time system design and operation. From vehicle navigation to space applications as well as industrial control systems, the trend is to deploy multiple processors in real-time systems: systems with 4 -- 8 processors are common, and it is expected that many-core systems with dozens of processing cores will be available in near future. For such systems, in addition to general temporal requirement common for all real-time systems, two additional operational objectives are seen as critical: energy efficiency and fault tolerance. An intriguing dimension of the problem is that energy efficiency and fault tolerance are typically conflicting objectives, due to the fact that tolerating faults (e.g., permanent/transient) often requires extra resources with high energy consumption potential. In this dissertation, various techniques for energy-efficient fault tolerance in multiprocessor real-time systems have been investigated. First, the Reliability-Aware Power Management (RAPM) framework, which can preserve the system reliability with respect to transient faults when Dynamic Voltage Scaling (DVS) is applied for energy savings, is extended to support parallel real-time applications with precedence constraints. Next, the traditional Standby-Sparing (SS) technique for dual processor systems, which takes both transient and permanent faults into consideration while saving energy, is generalized to support multiprocessor systems with arbitrary number of identical processors. Observing the inefficient usage of slack time in the SS technique, a Preference-Oriented Scheduling Framework is designed to address the problem where tasks are given preferences for being executed as soon as possible (ASAP) or as late as possible (ALAP). A preference-oriented earliest deadline (POED) scheduler is proposed and its application in multiprocessor systems for energy-efficient fault tolerance is investigated, where tasks' main copies are executed ASAP while backup copies ALAP to reduce the overlapped execution of main and backup copies of the same task and thus reduce energy consumption. All proposed techniques are evaluated through extensive simulations and compared with other state-of-the-art approaches. The simulation results confirm that the proposed schemes can preserve the system reliability while still achieving substantial energy savings. Finally, for both SS and POED based Energy-Efficient Fault-Tolerant (EEFT) schemes, a series of recovery strategies are designed when more than one (transient and permanent) faults need to be tolerated.

Download or read book A Generic Fault Tolerant Architecture for Real Time Dependable Systems written by David Powell and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of computer systems to be embedded in critical real-time applications is a complex task. Such systems must not only guarantee to meet hard real-time deadlines imposed by their physical environment, they must guarantee to do so dependably, despite both physical faults (in hardware) and design faults (in hardware or software). A fault-tolerance approach is mandatory for these guarantees to be commensurate with the safety and reliability requirements of many life- and mission-critical applications. This book explains the motivations and the results of a collaborative project', whose objective was to significantly decrease the lifecycle costs of such fault tolerant systems. The end-user companies participating in this project already deploy fault-tolerant systems in critical railway, space and nuclear-propulsion applications. However, these are proprietary systems whose architectures have been tailored to meet domain-specific requirements. This has led to very costly, inflexible, and often hardware-intensive solutions that, by the time they are developed, validated and certified for use in the field, can already be out-of-date in terms of their underlying hardware and software technology.

Download or read book An Evolutionary based Approach for Real time Fault tolerant Multiprocessor Scheduling written by Yohitsugu Hashimoto and published by . This book was released on 2004 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Selectively Fault tolerant Hard Real time Multiprocessor Scheduling written by Nicole Marie Sabine and published by . This book was released on 1995 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sixth International Conferencew on Information Technology written by and published by Allied Publishers. This book was released on with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scheduling Algorithms for Fault tolerant Real time Systems written by Risat Mahmud Pathan and published by . This book was released on 2010 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: