Download or read book Fault Tolerant Design Concepts for Highly Integrated Flight Critical Guidance and Control Systems Syst mes Tol rants Aux Fautes Pour Les Phases Critiques Du Guidage Et Pilotage written by North Atlantic Treaty Organization. Advisory Group for Aerospace Research and Development. Guidance and Control Panel. Symposium and published by . This book was released on 1990 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wind tunnel Investigation of a Number of Total pressure Tubes at High Angles of Attack written by A. Gerald Rainey and published by . This book was released on 1957 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book AGARD Advisory Report written by North Atlantic Treaty Organization. Advisory Group for Aerospace Research and Development and published by . This book was released on 1998 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technical Evaluation Report on the Guidance and Control Panel 49th Symposium on Fault Tolerant Design Concepts for Highly Integrated Flight Critical Guidance and Control Systems forty Ninth written by North Atlantic Treaty Organization and published by . This book was released on 1989 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fault Tolerant Hardware software Architecture for Flight Critical Function written by North Atlantic Treaty Organization. Advisory Group for Aerospace Research and Development. Guidance and Control Panel and published by . This book was released on 1985 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fault Detection and Fault Tolerant Control Using Sliding Modes written by Halim Alwi and published by Springer Science & Business Media. This book was released on 2011-06-07 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Detection and Fault-tolerant Control Using Sliding Modes is the first text dedicated to showing the latest developments in the use of sliding-mode concepts for fault detection and isolation (FDI) and fault-tolerant control in dynamical engineering systems. It begins with an introduction to the basic concepts of sliding modes to provide a background to the field. This is followed by chapters that describe the use and design of sliding-mode observers for FDI using robust fault reconstruction. The development of a class of sliding-mode observers is described from first principles through to the latest schemes that circumvent minimum-phase and relative-degree conditions. Recent developments have shown that the field of fault tolerant control is a natural application of the well-known robustness properties of sliding-mode control. A family of sliding-mode control designs incorporating control allocation, which can deal with actuator failures directly by exploiting redundancy, is presented. Various realistic case studies, specifically highlighting aircraft systems and including results from the implementation of these designs on a motion flight simulator, are described. A reference and guide for researchers in fault detection and fault-tolerant control, this book will also be of interest to graduate students working with nonlinear systems and with sliding modes in particular. Advances in Industrial Control aims to report and encourage the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.
Download or read book Fault Tolerant Flight Control written by Christopher Edwards and published by Springer. This book was released on 2010-04-18 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by leading experts in the field, this book provides the state-of-the-art in terms of fault tolerant control applicable to civil aircraft. The book consists of five parts and includes online material.
Download or read book Fault Diagnosis and Reconfiguration in Flight Control Systems written by C. Hajiyev and published by Springer Science & Business Media. This book was released on 2013-12-01 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problem of fault diagnosis and reconfigurable control is a new and actually developing field of science and engineering. The subject becomes more interesting since there is an increasing demand for the navigation and control systems of aerospace vehicles, automated actuators etc. to be more safe and reliable. Nowadays, the problems of fault detection and isolation and reconfigurable control attract the attention the scientists in the world. The subject is emphasized in the recent international congresses such as IF AC World Congresses (San Francisco-1996, Beijing-1999, and Barcelona-2002) and lMEKO World Congresses (Tampere-1997, Osaka-1999, Vienna-2000), and also in the international conferences on fault diagnosis such as SAFEPROCESS Conferences (Hull-1997, Budapest-2000). The presented methods in the book are based on linear and nonlinear dynamic mathematical models of the systems. Technical objects and systems stated by these models are very large, and include various control systems, actuators, sensors, computer systems, communication systems, and mechanical, hydraulic, pneumatic, electrical and electronic devices. The analytical fault diagnosis techniques of these objects have been developed for several decades. Many of those techniques are based on the use of the results of modem control theory. This is natural, because it is known that fault diagnosis process in control systems is considered as a part of general control process. xxii In organization of fault diagnosis of control systems, the use of the concepts and methods of modem control theory including concepts of state space, modeling, controllability, observability, estimation, identification, and filtering is very efficient.
Download or read book Fault Diagnosis and Fault Tolerant Control and Guidance for Aerospace Vehicles written by Ali Zolghadri and published by Springer Science & Business Media. This book was released on 2013-10-07 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Diagnosis and Fault-Tolerant Control and Guidance for Aerospace demonstrates the attractive potential of recent developments in control for resolving such issues as flight performance, self protection and extended-life structures. Importantly, the text deals with a number of practically significant considerations: tuning, complexity of design, real-time capability, evaluation of worst-case performance, robustness in harsh environments, and extensibility when development or adaptation is required. Coverage of such issues helps to draw the advanced concepts arising from academic research back towards the technological concerns of industry. Initial coverage of basic definitions and ideas and a literature review gives way to a treatment of electrical flight control system failures: oscillatory failure, runaway, and jamming. Advanced fault detection and diagnosis for linear and linear-parameter-varying systems are described. Lastly recovery strategies appropriate to remaining actuator/sensor/communications resources are developed. The authors exploit experience gained in research collaboration with academic and major industrial partners to validate advanced fault diagnosis and fault-tolerant control techniques with realistic benchmarks or real-world aeronautical and space systems. Consequently, the results presented in Fault Diagnosis and Fault-Tolerant Control and Guidance for Aerospace, will be of interest in both academic and aerospatial-industrial milieux.
Download or read book Patterns for Fault Tolerant Software written by Robert S. Hanmer and published by John Wiley & Sons. This book was released on 2013-07-12 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software patterns have revolutionized the way developer’s and architects think about how software is designed, built and documented. This new title in Wiley’s prestigious Series in Software Design Patterns presents proven techniques to achieve patterns for fault tolerant software. This is a key reference for experts seeking to select a technique appropriate for a given system. Readers are guided from concepts and terminology, through common principles and methods, to advanced techniques and practices in the development of software systems. References will provide access points to the key literature, including descriptions of exemplar applications of each technique. Organized into a collection of software techniques, specific techniques can be easily found with sufficient detail to allow appropriate choices for the system being designed.
Download or read book Fault Tolerance written by Peter A. Lee and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: The production of a new version of any book is a daunting task, as many authors will recognise. In the field of computer science, the task is made even more daunting by the speed with which the subject and its supporting technology move forward. Since the publication of the first edition of this book in 1981 much research has been conducted, and many papers have been written, on the subject of fault tolerance. Our aim then was to present for the first time the principles of fault tolerance together with current practice to illustrate those principles. We believe that the principles have (so far) stood the test of time and are as appropriate today as they were in 1981. Much work on the practical applications of fault tolerance has been undertaken, and techniques have been developed for ever more complex situations, such as those required for distributed systems. Nevertheless, the basic principles remain the same.
Download or read book Fault Tolerant Design written by Elena Dubrova and published by Springer Science & Business Media. This book was released on 2013-03-15 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook serves as an introduction to fault-tolerance, intended for upper-division undergraduate students, graduate-level students and practicing engineers in need of an overview of the field. Readers will develop skills in modeling and evaluating fault-tolerant architectures in terms of reliability, availability and safety. They will gain a thorough understanding of fault tolerant computers, including both the theory of how to design and evaluate them and the practical knowledge of achieving fault-tolerance in electronic, communication and software systems. Coverage includes fault-tolerance techniques through hardware, software, information and time redundancy. The content is designed to be highly accessible, including numerous examples and exercises. Solutions and powerpoint slides are available for instructors.
Download or read book Methods Models and Tools for Fault Tolerance written by Michael Butler and published by Springer Science & Business Media. This book was released on 2009-03-26 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growing complexity of modern software systems makes it increasingly difficult to ensure the overall dependability of software-intensive systems. Mastering system complexity requires design techniques that support clear thinking and rigorous validation and verification. Formal design methods together with fault-tolerant design techniques help to achieve this. Therefore, there is a clear need for methods that enable rigorous modeling and the development of complex fault-tolerant systems. This book is an outcome of the workshop on Methods, Models and Tools for Fault Tolerance, MeMoT 2007, held in conjunction with the 6th international conference on Integrated Formal Methods, iFM 2007, in Oxford, UK, in July 2007. The authors of the best workshop papers were asked to enhance and expand their work, and a number of well-established researchers working in the area contributed invited chapters in addition. From the 15 refereed and revised papers presented, 12 are versions reworked from the workshop and 3 papers are invited. The articles are organized in four topical sections on: formal reasoning about fault-tolerant systems and protocols; fault tolerance: modelling in B; fault tolerance in system development process; and fault-tolerant applications.
Download or read book Data driven Design of Fault Diagnosis and Fault tolerant Control Systems written by Steven X. Ding and published by Springer Science & Business Media. This book was released on 2014-04-12 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Data-driven Design of Fault Diagnosis and Fault-tolerant Control Systems presents basic statistical process monitoring, fault diagnosis, and control methods and introduces advanced data-driven schemes for the design of fault diagnosis and fault-tolerant control systems catering to the needs of dynamic industrial processes. With ever increasing demands for reliability, availability and safety in technical processes and assets, process monitoring and fault-tolerance have become important issues surrounding the design of automatic control systems. This text shows the reader how, thanks to the rapid development of information technology, key techniques of data-driven and statistical process monitoring and control can now become widely used in industrial practice to address these issues. To allow for self-contained study and facilitate implementation in real applications, important mathematical and control theoretical knowledge and tools are included in this book. Major schemes are presented in algorithm form and demonstrated on industrial case systems. Data-driven Design of Fault Diagnosis and Fault-tolerant Control Systems will be of interest to process and control engineers, engineering students and researchers with a control engineering background.
Download or read book Software Fault Tolerance Techniques and Implementation written by Laura L. Pullum and published by Artech House. This book was released on 2001 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Look to this innovative resource for the most comprehensive coverage of software fault tolerance techniques available in a single volume. It offers you a thorough understanding of the operation of critical software fault tolerance techniques and guides you through their design, operation and performance. You get an in-depth discussion on the advantages and disadvantages of specific techniques, so you can decide which ones are best suited for your work. The book examines key programming techniques such as assertions, checkpointing, and atomic actions, and provides design tips and models to assist in the development of critical fault tolerant software that helps ensure dependable performance. From software reliability, recovery, and redundancy... to design and data diverse software fault tolerance techniques, this practical reference provides detailed insight into techniques that can improve the overall dependability of your software.
Download or read book Design and Analysis of Fault tolerant Digital Systems written by Barry W. Johnson and published by . This book was released on 1989 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fault Tolerant Control of Large Civil Aircraft written by Xingjian Wang and published by Springer Nature. This book was released on with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
