Download or read book Fault Diagnosis and Fault Tolerance for Mechatronic Systems Recent Advances written by Fabrizio Caccavale and published by Springer. This book was released on 2003-09-05 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will play a central role in ensuring safe and reliable behaviour of intelligent and autonomous systems. It collects some of the most recent results in fault diagnosis and fault tolerant systems, with particular emphasis on mechatronic systems.

Download or read book Fault Diagnosis Systems written by Rolf Isermann and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: With increasing demands for efficiency and product quality plus progress in the integration of automatic control systems in high-cost mechatronic and safety-critical processes, the field of supervision (or monitoring), fault detection and fault diagnosis plays an important role. The book gives an introduction into advanced methods of fault detection and diagnosis (FDD). After definitions of important terms, it considers the reliability, availability, safety and systems integrity of technical processes. Then fault-detection methods for single signals without models such as limit and trend checking and with harmonic and stochastic models, such as Fourier analysis, correlation and wavelets are treated. This is followed by fault detection with process models using the relationships between signals such as parameter estimation, parity equations, observers and principal component analysis. The treated fault-diagnosis methods include classification methods from Bayes classification to neural networks with decision trees and inference methods from approximate reasoning with fuzzy logic to hybrid fuzzy-neuro systems. Several practical examples for fault detection and diagnosis of DC motor drives, a centrifugal pump, automotive suspension and tire demonstrate applications.

Download or read book Fault Diagnosis and Fault Tolerant Control and Guidance for Aerospace Vehicles written by Ali Zolghadri and published by Springer Science & Business Media. This book was released on 2013-10-07 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Diagnosis and Fault-Tolerant Control and Guidance for Aerospace demonstrates the attractive potential of recent developments in control for resolving such issues as flight performance, self protection and extended-life structures. Importantly, the text deals with a number of practically significant considerations: tuning, complexity of design, real-time capability, evaluation of worst-case performance, robustness in harsh environments, and extensibility when development or adaptation is required. Coverage of such issues helps to draw the advanced concepts arising from academic research back towards the technological concerns of industry. Initial coverage of basic definitions and ideas and a literature review gives way to a treatment of electrical flight control system failures: oscillatory failure, runaway, and jamming. Advanced fault detection and diagnosis for linear and linear-parameter-varying systems are described. Lastly recovery strategies appropriate to remaining actuator/sensor/communications resources are developed. The authors exploit experience gained in research collaboration with academic and major industrial partners to validate advanced fault diagnosis and fault-tolerant control techniques with realistic benchmarks or real-world aeronautical and space systems. Consequently, the results presented in Fault Diagnosis and Fault-Tolerant Control and Guidance for Aerospace, will be of interest in both academic and aerospatial-industrial milieux.

Download or read book Fault tolerant Control Systems written by Hassan Noura and published by Springer Science & Business Media. This book was released on 2009-07-30 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: The seriesAdvancesinIndustrialControl aims to report and encourage te- nologytransfer in controlengineering. The rapid development of controlte- nology has an impact on all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies. . . , new challenges. Much of this devel- ment work resides in industrial reports, feasibility study papers, and the - ports of advanced collaborative projects. The series o?ers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. Control system design and technology continues to develop in many d- ferent directions. One theme that the Advances in Industrial Control series is following is the application of nonlinear control design methods, and the series has some interesting new commissions in progress. However, another theme of interest is how to endow the industrial controller with the ability to overcome faults and process degradation. Fault detection and isolation is a broad ?eld with a research literature spanning several decades. This topic deals with three questions: • How is the presence of a fault detected? • What is the cause of the fault? • Where is it located? However, there has been less focus on the question of how to use the control system to accommodate and overcome the performance deterioration caused by the identi?ed sensor or actuator fault.

Download or read book Fault Detection and Fault Tolerant Control Using Sliding Modes written by Halim Alwi and published by Springer Science & Business Media. This book was released on 2011-06-07 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Detection and Fault-tolerant Control Using Sliding Modes is the first text dedicated to showing the latest developments in the use of sliding-mode concepts for fault detection and isolation (FDI) and fault-tolerant control in dynamical engineering systems. It begins with an introduction to the basic concepts of sliding modes to provide a background to the field. This is followed by chapters that describe the use and design of sliding-mode observers for FDI using robust fault reconstruction. The development of a class of sliding-mode observers is described from first principles through to the latest schemes that circumvent minimum-phase and relative-degree conditions. Recent developments have shown that the field of fault tolerant control is a natural application of the well-known robustness properties of sliding-mode control. A family of sliding-mode control designs incorporating control allocation, which can deal with actuator failures directly by exploiting redundancy, is presented. Various realistic case studies, specifically highlighting aircraft systems and including results from the implementation of these designs on a motion flight simulator, are described. A reference and guide for researchers in fault detection and fault-tolerant control, this book will also be of interest to graduate students working with nonlinear systems and with sliding modes in particular. Advances in Industrial Control aims to report and encourage the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.

Download or read book Advanced and Intelligent Computations in Diagnosis and Control written by Zdzisław Kowalczuk and published by Springer. This book was released on 2015-09-01 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to the demands of research and industrial centers for diagnostics, monitoring and decision making systems that result from the increasing complexity of automation and systems, the need to ensure the highest level of reliability and safety, and continuing research and the development of innovative approaches to fault diagnosis. The contributions combine domains of engineering knowledge for diagnosis, including detection, isolation, localization, identification, reconfiguration and fault-tolerant control. The book is divided into six parts: (I) Fault Detection and Isolation; (II) Estimation and Identification; (III) Robust and Fault Tolerant Control; (IV) Industrial and Medical Diagnostics; (V) Artificial Intelligence; (VI) Expert and Computer Systems.

Download or read book Artificial Intelligence and Data Science Based R D Interventions written by Ratnajit Bhattacharjee and published by Springer Nature. This book was released on with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fault Detection Supervision and Safety of Technical Processes 2006 written by Hong-Yue Zhang and published by Elsevier. This book was released on 2007-03-01 with total page 1576 pages. Available in PDF, EPUB and Kindle. Book excerpt: The safe and reliable operation of technical systems is of great significance for the protection of human life and health, the environment, and of the vested economic value. The correct functioning of those systems has a profound impact also on production cost and product quality. The early detection of faults is critical in avoiding performance degradation and damage to the machinery or human life. Accurate diagnosis then helps to make the right decisions on emergency actions and repairs. Fault detection and diagnosis (FDD) has developed into a major area of research, at the intersection of systems and control engineering, artificial intelligence, applied mathematics and statistics, and such application fields as chemical, electrical, mechanical and aerospace engineering. IFAC has recognized the significance of FDD by launching a triennial symposium series dedicated to the subject. The SAFEPROCESS Symposium is organized every three years since the first symposium held in Baden-Baden in 1991. SAFEPROCESS 2006, the 6th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes was held in Beijing, PR China. The program included three plenary papers, two semi-plenary papers, two industrial talks by internationally recognized experts and 258 regular papers, which have been selected out of a total of 387 regular and invited papers submitted. * Discusses the developments and future challenges in all aspects of fault diagnosis and fault tolerant control * 8 invited and 36 contributed sessions included with a special session on the demonstration of process monitoring and diagnostic software tools

Download or read book Automotive Air Conditioning written by Quansheng Zhang and published by Springer. This book was released on 2016-08-10 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents research advances in automotive AC systems using an interdisciplinary approach combining both thermal science, and automotive engineering. It covers a variety of topics, such as: control strategies, optimization algorithms, and diagnosis schemes developed for when automotive air condition systems interact with powertrain dynamics. In contrast to the rapid advances in the fields of building HVAC and automotive separately, an interdisciplinary examination of both areas has long been neglected. The content presented in this book not only reveals opportunities when interaction between on-board HVAC and powertrain is considered, but also provides new findings to achieve performance improvement using model-based methodologies.

Download or read book Artificial Intelligence for Knowledge Management written by Eunika Mercier-Laurent and published by Springer. This book was released on 2016-02-02 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features a selection of papers presented at the Second IFIP WG 12.6 International Workshop on Artificial Intelligence for Knowledge Management, AI4KM 2014, held in Wroclaw, Poland, in September 2014, in the framework of the Federated Conferences on Computer Science and Information Systems, FedCSIS 2014. The 9 revised and extended papers and one invited paper were carefully reviewed and selected for inclusion in this volume. They present new research and innovative aspects in the field of knowledge management and are organized in the following topical sections: tools and methods for knowledge acquisition; models and functioning of knowledge management; techniques of artificial intelligence supporting knowlege management; and components of knowledge flow.

Download or read book Handling Uncertainty and Networked Structure in Robot Control written by Lucian Bușoniu and published by Springer. This book was released on 2016-02-06 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on two challenges posed in robot control by the increasing adoption of robots in the everyday human environment: uncertainty and networked communication. Part I of the book describes learning control to address environmental uncertainty. Part II discusses state estimation, active sensing, and complex scenario perception to tackle sensing uncertainty. Part III completes the book with control of networked robots and multi-robot teams. Each chapter features in-depth technical coverage and case studies highlighting the applicability of the techniques, with real robots or in simulation. Platforms include mobile ground, aerial, and underwater robots, as well as humanoid robots and robot arms. Source code and experimental data are available at http://extras.springer.com. The text gathers contributions from academic and industry experts, and offers a valuable resource for researchers or graduate students in robot control and perception. It also benefits researchers in related areas, such as computer vision, nonlinear and learning control, and multi-agent systems.

Download or read book Sliding Modes after the first Decade of the 21st Century written by Leonid Fridman and published by Springer. This book was released on 2011-09-28 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the newest results of the major world research groups working in the area of Variable Structure Systems and Sliding Mode Control (VSS/SMC). The research activity of these groups is coordinated by the IEEE Technical Committee on Variable Structure Systems (VSS) and Sliding Modes (SM). The presented results include the reports of the research groups collaborating in a framework of the Unión European Union – México project of Fondo de Cooperación Internacional en Ciencia y Tecnología (FONCICyT) 93302 titled "Automatization and Monitoring of Energy Production Processes via Sliding Mode Control". The book starts with the overview of the sliding mode control concepts and algorithms that were developed and discussed in the last two decades The research papers are combined in three sections: Part I: VSS and SM Algorithms and their Analysis Part II: SMC Design Part III: Applications of VSS and SMC The book will be of interests of engineers, researchers and graduate students working in the area of the control systems design. Novel mathematical theories and engineering concepts of control systems are rigorously discussed and supported by numerous applications to practical tasks.

Download or read book Sliding Mode Control Methodology in the Applications of Industrial Power Systems written by Jianxing Liu and published by Springer Nature. This book was released on 2019-10-23 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent advanced techniques in sliding mode control and observer design for industrial power systems, focusing on their applications in polymer electrolyte membrane fuel cells and power converters. Readers will find not only valuable new fault detection and isolation techniques based on sliding mode control and observers, but also a number of robust control and estimation methodologies combined with fuzzy neural networks and extended state observer methods. The book also provides necessary experimental and simulation examples for proton exchange membrane fuel cell systems and power converter systems. Given its scope, it offers a valuable resource for undergraduate and graduate students, academics, scientists and engineers who are working in the field.

Download or read book Advances in Human Robot Interaction written by Erwin Prassler and published by Springer Science & Business Media. This book was released on 2004-10-27 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Advances in Human-Robot Interaction" provides a unique collection of recent research in human-robot interaction. It covers the basic important research areas ranging from multi-modal interfaces, interpretation, interaction, learning, or motion coordination to topics such as physical interaction, systems, and architectures. The book addresses key issues of human-robot interaction concerned with perception, modelling, control, planning and cognition, covering a wide spectrum of applications. This includes interaction and communication with robots in manufacturing environments and the collaboration and co-existence with assistive robots in domestic environments. Among the presented examples are a robotic bartender, a new programming paradigm for a cleaning robot, or an approach to interactive teaching of a robot assistant in manufacturing environment. This carefully edited book reports on contributions from leading German academic institutions and industrial companies brought together within MORPHA, a 4 year project on interaction and communication between humans and anthropomorphic robot assistants.

Download or read book Intelligent Marine Robotics Modelling Simulation and Applications written by Cheng Siong Chin and published by MDPI. This book was released on 2020-04-24 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: The biennial Congress of the Italian Society of Oral Pathology and Medicine (SIPMO) is an International meeting dedicated to the growing diagnostic challenges in the oral pathology and medicine field. The III International and XV National edition will be a chance to discuss clinical conditions which are unusual, rare, or difficult to define. Many consolidated national and international research groups will be involved in the debate and discussion through special guest lecturers, academic dissertations, single clinical case presentations, posters, and degree thesis discussions. The SIPMO Congress took place from the 17th to the 19th of October 2019 in Bari (Italy), and the enclosed copy of Proceedings is a non-exhaustive collection of abstracts from the SIPMO 2019 contributions.

Download or read book Advances in Artificial Intelligence Software and Systems Engineering written by Tareq Z. Ahram and published by Springer Nature. This book was released on 2021-07-07 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses emerging issues concerning the integration of artificial intelligence systems in our daily lives. It focuses on the cognitive, visual, social and analytical aspects of computing and intelligent technologies, and highlights ways to improve the acceptance, effectiveness, and efficiency of said technologies. Topics such as responsibility, integration and training are discussed throughout. The book also reports on the latest advances in systems engineering, with a focus on societal challenges and next-generation systems and applications for meeting them. Further, it covers some cutting-edge issues in energy, including intelligent control systems for power plant, and technology acceptance models. Based on the AHFE 2021 Conferences on Human Factors in Software and Systems Engineering, Artificial Intelligence and Social Computing, and Energy, held virtually on 25–29 July, 2021, from USA, this book provides readers with extensive information on current research and future challenges in these fields, together with practical insights into the development of innovative services for various purposes.

Download or read book Intelligent Mobile Robot Navigation written by Federico Cuesta and published by Springer Science & Business Media. This book was released on 2005-03-11 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intelligent Mobile Robot Navigation builds upon the application of fuzzy logic to the area of intelligent control of mobile robots. Reactive, planned, and teleoperated techniques are considered, leading to the development of novel fuzzy control systems for perception and navigation of nonholonomic autonomous vehicles. The unique feature of this monograph lies in its comprehensive treatment of the problem, from the theoretical development of the various schemes down to the real-time implementation of algorithms on mobile robot prototypes. As such, the book spans different domains ranging from mobile robots to intelligent transportation systems, from automatic control to artificial intelligence.