Download or read book Fault Detection and Flight Data Measurement written by Ihab Samy and published by Springer. This book was released on 2012-02-02 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book considers two popular topics: fault detection and isolation (FDI) and flight data estimation using flush air data sensing (FADS) systems. Literature surveys, comparison tests, simulations and wind tunnel tests are performed. In both cases, a UAV platform is considered for demonstration purposes. In the first part of the book, FDI is considered for sensor faults where a neural network approach is implemented. FDI is applied both in academia and industry resulting in many publications over the past 50 years or so. However few publications consider neural networks in comparison to traditional techniques such as observer based, parameter estimations and parity space approaches. The second part of this book focuses on how to estimate flight data (angle of attack, airspeed) using a matrix of pressure sensors and a neural network model. In conclusion this book can serve as an introduction to FDI and FADS systems, a literature survey, and a case study for UAV applications.
Download or read book Fault Detection and Flight Data Measurement written by Ihab Samy and published by Springer Science & Business Media. This book was released on 2011-10-15 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book considers two popular topics: fault detection and isolation (FDI) and flight data estimation using flush air data sensing (FADS) systems. Literature surveys, comparison tests, simulations and wind tunnel tests are performed. In both cases, a UAV platform is considered for demonstration purposes. In the first part of the book, FDI is considered for sensor faults where a neural network approach is implemented. FDI is applied both in academia and industry resulting in many publications over the past 50 years or so. However few publications consider neural networks in comparison to traditional techniques such as observer based, parameter estimations and parity space approaches. The second part of this book focuses on how to estimate flight data (angle of attack, airspeed) using a matrix of pressure sensors and a neural network model. In conclusion this book can serve as an introduction to FDI and FADS systems, a literature survey, and a case study for UAV applications.
Download or read book A fault detection method for FADS system based on interval valued neutrosophic sets belief rule base and D S evidence reasoning written by Qianlei Jia and published by Infinite Study. This book was released on with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault detection, with the characteristics of strong uncertainty and randomness, has always been one of the research hotspots in the field of aerospace. Considering that devices will inevitably encounter various unknown interference in the process of use, which greatly limits the performance of many traditional fault detection methods. Therefore, the main aim of this paper is to address this problem from the perspective of uncertainty and randomness of measurement signal. In information engineering, interval-valued neutrosophic sets (IVNSs), belief rule base (BRB), and Dempster-Shafer (D-S) evidence reasoning are always characterized by the strong ability in revealing uncertainty, but each has its drawbacks. As a result, the three theories are firstly combined in this paper to form a powerful fault detection algorithm. Besides, a series of innovations are proposed to improve the method, including a new score function based on p-norm for IVNSs and a new approach of calculating the similarity between IVNSs, which are both proved by authoritative prerequisites. To illustrate the effectiveness of the proposed method, flush air data sensing (FADS), a technologically advanced airborne sensor, is adopted in this paper. The aerodynamic model of FADS is analyzed in detail using knowledge of aerodynamics under subsonic and supersonic conditions, meanwhile, the high-precision model is established based on the aerodynamic database obtained from CFD software.
Download or read book Time Series Analysis Methods and Applications for Flight Data written by Jianye Zhang and published by Springer. This book was released on 2016-12-22 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on different facets of flight data analysis, including the basic goals, methods, and implementation techniques. As mass flight data possesses the typical characteristics of time series, the time series analysis methods and their application for flight data have been illustrated from several aspects, such as data filtering, data extension, feature optimization, similarity search, trend monitoring, fault diagnosis, and parameter prediction, etc. An intelligent information-processing platform for flight data has been established to assist in aircraft condition monitoring, training evaluation and scientific maintenance. The book will serve as a reference resource for people working in aviation management and maintenance, as well as researchers and engineers in the fields of data analysis and data mining.
Download or read book Fault tolerant Flight Control and Guidance Systems written by Guillaume J. J. Ducard and published by Springer Science & Business Media. This book was released on 2009-05-14 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a complete overview of fault-tolerant flight control techniques. Discussion covers the necessary equations for the modeling of small UAVs, a complete system based on extended Kalman filters, and a nonlinear flight control and guidance system.
Download or read book Failure Detection and Fault Management Techniques for a Pneumatic High angle of attack Flush Airdata Sensing HI FADS System written by Stephen A. Whitmore and published by . This book was released on 1992 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theory Design and Applications of Unmanned Aerial Vehicles written by A. R. Jha Ph.D and published by CRC Press. This book was released on 2016-11-18 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a complete overview of the theory, design, and applications of unmanned aerial vehicles. It covers the basics, including definitions, attributes, manned vs. unmanned, design considerations, life cycle costs, architecture, components, air vehicle, payload, communications, data link, and ground control stations. Chapters cover types and civilian roles, sensors and characteristics, alternative power, communications and data links, conceptual design, human machine interface, sense and avoid systems, civil airspace issues and integration efforts, navigation, autonomous control, swarming, and future capabilities.
Download or read book Fault Diagnosis and Reconfiguration in Flight Control Systems written by C. Hajiyev and published by Springer Science & Business Media. This book was released on 2013-12-01 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problem of fault diagnosis and reconfigurable control is a new and actually developing field of science and engineering. The subject becomes more interesting since there is an increasing demand for the navigation and control systems of aerospace vehicles, automated actuators etc. to be more safe and reliable. Nowadays, the problems of fault detection and isolation and reconfigurable control attract the attention the scientists in the world. The subject is emphasized in the recent international congresses such as IF AC World Congresses (San Francisco-1996, Beijing-1999, and Barcelona-2002) and lMEKO World Congresses (Tampere-1997, Osaka-1999, Vienna-2000), and also in the international conferences on fault diagnosis such as SAFEPROCESS Conferences (Hull-1997, Budapest-2000). The presented methods in the book are based on linear and nonlinear dynamic mathematical models of the systems. Technical objects and systems stated by these models are very large, and include various control systems, actuators, sensors, computer systems, communication systems, and mechanical, hydraulic, pneumatic, electrical and electronic devices. The analytical fault diagnosis techniques of these objects have been developed for several decades. Many of those techniques are based on the use of the results of modem control theory. This is natural, because it is known that fault diagnosis process in control systems is considered as a part of general control process. xxii In organization of fault diagnosis of control systems, the use of the concepts and methods of modem control theory including concepts of state space, modeling, controllability, observability, estimation, identification, and filtering is very efficient.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Fault Detection Supervision and Safety for Technical Processes 1991 written by B. Freyermuth and published by Elsevier. This book was released on 2014-05-23 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: These Proceedings provide a general overview as well as detailed information on the developing field of reliability and safety of technical processes in automatically controlled processes. The plenary papers present the state-of-the-art and an overview in the areas of aircraft and nuclear power stations, because these safety-critical system domains possess the most highly developed fault management and supervision schemes. Additional plenary papers covered the recent developments in analytical redundancy. In total there are 95 papers presented in these Proceedings.
Download or read book Fault Diagnosis and Fault Tolerant Control and Guidance for Aerospace Vehicles written by Ali Zolghadri and published by Springer Science & Business Media. This book was released on 2013-10-07 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Diagnosis and Fault-Tolerant Control and Guidance for Aerospace demonstrates the attractive potential of recent developments in control for resolving such issues as flight performance, self protection and extended-life structures. Importantly, the text deals with a number of practically significant considerations: tuning, complexity of design, real-time capability, evaluation of worst-case performance, robustness in harsh environments, and extensibility when development or adaptation is required. Coverage of such issues helps to draw the advanced concepts arising from academic research back towards the technological concerns of industry. Initial coverage of basic definitions and ideas and a literature review gives way to a treatment of electrical flight control system failures: oscillatory failure, runaway, and jamming. Advanced fault detection and diagnosis for linear and linear-parameter-varying systems are described. Lastly recovery strategies appropriate to remaining actuator/sensor/communications resources are developed. The authors exploit experience gained in research collaboration with academic and major industrial partners to validate advanced fault diagnosis and fault-tolerant control techniques with realistic benchmarks or real-world aeronautical and space systems. Consequently, the results presented in Fault Diagnosis and Fault-Tolerant Control and Guidance for Aerospace, will be of interest in both academic and aerospatial-industrial milieux.
Download or read book Issues of Fault Diagnosis for Dynamic Systems written by Ron J. Patton and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the time our first book Fault Diagnosis in Dynamic Systems: The ory and Applications was published in 1989 by Prentice Hall, there has been a surge in interest in research and applications into reliable methods for diag nosing faults in complex systems. The first book sold more than 1,200 copies and has become the main text in fault diagnosis for dynamic systems. This book will follow on this excellent record by focusing on some of the advances in this subject, by introducing new concepts in research and new application topics. The work cannot provide an exhaustive discussion of all the recent research in fault diagnosis for dynamic systems, but nevertheless serves to sample some of the major issues. It has been valuable once again to have the co-operation of experts throughout the world working in industry, gov emment establishments and academic institutions in writing the individual chapters. Sometimes dynamical systems have associated numerical models available in state space or in frequency domain format. When model infor mation is available, the quantitative model-based approach to fault diagnosis can be taken, using the mathematical model to generate analytically redun dant alternatives to the measured signals. When this approach is used, it becomes important to try to understand the limitations of the mathematical models i. e. , the extent to which model parameter variations occur and the effect of changing the systems point of operation.
Download or read book Sensors Fault Diagnosis Trends and Applications written by Piotr Witczak and published by MDPI. This book was released on 2021-09-01 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault diagnosis has always been a concern for industry. In general, diagnosis in complex systems requires the acquisition of information from sensors and the processing and extracting of required features for the classification or identification of faults. Therefore, fault diagnosis of sensors is clearly important as faulty information from a sensor may lead to misleading conclusions about the whole system. As engineering systems grow in size and complexity, it becomes more and more important to diagnose faulty behavior before it can lead to total failure. In the light of above issues, this book is dedicated to trends and applications in modern-sensor fault diagnosis.
Download or read book Deep Learning and Parallel Computing Environment for Bioengineering Systems written by Arun Kumar Sangaiah and published by Academic Press. This book was released on 2019-07-26 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deep Learning and Parallel Computing Environment for Bioengineering Systems delivers a significant forum for the technical advancement of deep learning in parallel computing environment across bio-engineering diversified domains and its applications. Pursuing an interdisciplinary approach, it focuses on methods used to identify and acquire valid, potentially useful knowledge sources. Managing the gathered knowledge and applying it to multiple domains including health care, social networks, mining, recommendation systems, image processing, pattern recognition and predictions using deep learning paradigms is the major strength of this book. This book integrates the core ideas of deep learning and its applications in bio engineering application domains, to be accessible to all scholars and academicians. The proposed techniques and concepts in this book can be extended in future to accommodate changing business organizations' needs as well as practitioners' innovative ideas. - Presents novel, in-depth research contributions from a methodological/application perspective in understanding the fusion of deep machine learning paradigms and their capabilities in solving a diverse range of problems - Illustrates the state-of-the-art and recent developments in the new theories and applications of deep learning approaches applied to parallel computing environment in bioengineering systems - Provides concepts and technologies that are successfully used in the implementation of today's intelligent data-centric critical systems and multi-media Cloud-Big data
Download or read book Fault tolerant Control Systems written by Hassan Noura and published by Springer Science & Business Media. This book was released on 2009-07-30 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: The seriesAdvancesinIndustrialControl aims to report and encourage te- nologytransfer in controlengineering. The rapid development of controlte- nology has an impact on all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies. . . , new challenges. Much of this devel- ment work resides in industrial reports, feasibility study papers, and the - ports of advanced collaborative projects. The series o?ers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. Control system design and technology continues to develop in many d- ferent directions. One theme that the Advances in Industrial Control series is following is the application of nonlinear control design methods, and the series has some interesting new commissions in progress. However, another theme of interest is how to endow the industrial controller with the ability to overcome faults and process degradation. Fault detection and isolation is a broad ?eld with a research literature spanning several decades. This topic deals with three questions: • How is the presence of a fault detected? • What is the cause of the fault? • Where is it located? However, there has been less focus on the question of how to use the control system to accommodate and overcome the performance deterioration caused by the identi?ed sensor or actuator fault.
Download or read book Advances in Swarm Intelligence written by Ying Tan and published by Springer. This book was released on 2012-06-13 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book and its companion volume, LNCS vols. 7331 and 7332, constitute the Proceedings of the Third International conference on Swarm Intelligence, ICSI 2012, held in Shenzhen, China in June 2012. The 145 full papers presented were carefully reviewed and selected from 247 submissions. The papers are organized in 27 cohesive sections covering all major topics of swarm intelligence research and developments.
Download or read book NASA Technical Memorandum written by and published by . This book was released on 1992 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:
