Download or read book Multiaxial Fatigue written by Darrell Socie and published by SAE International. This book was released on 1999-12-15 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides practicing engineers, researchers, and students with a working knowledge of the fatigue design process and models under multiaxial states of stress and strain. Readers are introduced to the important considerations of multiaxial fatigue that differentiate it from uniaxial fatigue.

Download or read book Fatigue Performance of Additively Manufactured Ti 6Al 4V written by Carter Brooks Keough and published by . This book was released on 2020 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metal Fatigue Effects of Small Defects and Nonmetallic Inclusions written by Yukitaka Murakami and published by Elsevier. This book was released on 2002-04-29 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal fatigue is an essential consideration for engineers and researchers who are looking at factors that cause metals to fail through stress, corrosion, etc. This is an English translation of a book originally published in Japan in 1993, with an additional two chapters on the fatigue failure of steels and the effect of surface roughness on fatigue strength. The methodology is based on important and reliable results and may be usefully applied to other fatigue problems not directly treated in this book.

Download or read book Fatigue Performance of Laser Additive Manufactured Ti 6al 4V in Very High Cycle Fatigue Regime Up to 1E9 Cycles written by Eric Wycisk and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing technologies are in the process of establishing themselves as an alternative production technology to conventional manufacturing, such as casting or milling. Especially laser additive manufacturing (LAM) enables the production of metallic parts with mechanical properties comparable to conventionally manufactured components. Due to the high geometrical freedom in LAM, the technology enables the production of ultra-light weight designs, and therefore gains increasing importance in aircraft and space industry. The high quality standards of these industries demand predictability of material properties for static and dynamic load cases. However, fatigue properties especially in the very high cycle fatigue (VHCF) regime until 109 cycles have not been sufficiently determined yet. Therefore, this paper presents an analysis of fatigue properties of laser additive manufactured Ti-6Al-4V under cyclic tension-tension until 107 cycles and tension-compression load until 109 cycles. For the analysis of laser additive manufactured titanium alloy Ti-6Al-4V, Woehler fatigue tests under tension-tension and tension-compression were carried out in the high cycle and VHCF regime. Specimens in stress-relieved as well as hot-isostatic-pressed conditions were analyzed regarding crack initiation site, mean stress sensitivity, and overall fatigue performance. The determined fatigue properties show values in the range of conventionally manufactured Ti-6Al-4V with particularly good performance for hot-isostatic-pressed additive-manufactured material. For all conditions, the results show no conventional fatigue limit but a constant increase in fatigue life with decreasing loads. No effects of test frequency on life span could be determined. However, independently of testing principle, a shift of crack initiation from surface to internal initiation could be observed with increasing cycles to failure.

Download or read book Titanium Alloys written by Jan Sieniawski and published by BoD – Books on Demand. This book was released on 2013-05-15 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains six chapters and covers topics dealing with biomedical applications of titanium alloys, surface treatment, relationships between microstructure and mechanical and technological properties, and the effect of radiation on the structure of the titanium alloys.

Download or read book Illuminating the Mechanisms that Control the Fatigue Performance of Additively Manufactured Ti 6Al 4V written by Peipei Li and published by . This book was released on 2018 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This dissertation composes three papers detailing work intended to examine the mechanisms that control the failure of additively manufactured (AM) metallic materials. All studies aim at developing models to predict the fatigue performance of AM Ti-6Al-4V utilizing computational tools, and ultimately to realize a predictive process-structure-performance modeling framework. First, a thorough literature review was conducted to catalog and analyze the published fatigue performance data of AM Ti-6Al-4V. Comparing to traditionally manufactured Ti-6Al-4V, the key features that control fatigue performance of AM parts are the same as the ones governing traditional cast and wrought, i.e. surface finish, residual stress, build defects and microstructure. Second, possible mechanisms by which hot isostatic pressing (HIP) improves the high cycle fatigue performance of powder bed fused (PBF) Ti-6Al-4V were examined. The results suggest that HIP may act most significantly by decreasing the fraction of the defect population that can initiate fatigue cracks, both by decreasing defect sizes below a threshold and by changing the microstructure around defects, the latter of which is confirmed by an electron backscatter diffraction (EBSD) study. The gained understanding is used to provide initial guidance on the choice of optimum HIP parameter via a continuum mechanics model. Third, to understand the role of geometry on the fatigue performance of as-built laser PBF Ti-6Al-4V, two sets of specimens only differing in gage surface area were fabricated. A significant difference in fatigue performance was observed between these two geometries. Possible origins of the observed difference, such as surface roughness, microstructure, build defects, and mechanical interactions between fatigue cracks and the specimen geometry, were investigated. A weakest link approach with X-ray CT measurements of build defects in the two geometries was able to capture the geometric effect on the fatigue performance, consistent with the experimental data. To attempt to link the defect populations with the thermal histories resulting from the different geometries, a linear heat conduction thermal model was performed. Lastly, a predictive model framework that links the material properties from the witness coupon data with the fatigue performance of structural components was developed to facilitate the qualification and certification of PBF technique in safety critical loading bearing applications. Focusing on a PBF aircraft link component, a simple deterministic model was first developed. A probabilistic fatigue model was then constructed to predict both the median trend and variability of the fatigue life of the link component, taking both the populations of fatigue crack initiation sites and the full stress field from finite element (FE) simulations as inputs. Both models under-predicted the median fatigue life of the link component, which we hypothesize to be due to the overestimation of the multiaxial fatigue indicator. The predicted variability of the fatigue life of the probabilistic model showed good agreement with the experiments. In addition, the effect of crack initiation site density on the fatigue performance of the link component was also examined with the probabilistic model.

Download or read book Titanium written by Matthew J. Donachie and published by ASM International. This book was released on 2000 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to support the need of engineering, management, and other professionals for information on titanium by providing an overview of the major topics, this book provides a concise summary of the most useful information required to understand titanium and its alloys. The author provides a review of the significant features of the metallurgy and application of titanium and its alloys. All technical aspects of the use of titanium are covered, with sufficient metals property data for most users. Because of its unique density, corrosion resistance, and relative strength advantages over competing materials such as aluminum, steels, and superalloys, titanium has found a niche in many industries. Much of this use has occurred through military research, and subsequent applications in aircraft, of gas turbine engines, although more recent use features replacement joints, golf clubs, and bicycles.Contents include: A primer on titanium and its alloys, Introduction to selection of titanium alloys, Understanding titanium's metallurgy and mill products, Forging and forming, Castings, Powder metallurgy, Heat treating, Joining technology and practice, Machining, Cleaning and finishing, Structure/processing/property relationships, Corrosion resistance, Advanced alloys and future directions, Appendices: Summary table of titanium alloys, Titanium alloy datasheets, Cross-reference to titanium alloys, Listing of selected specification and standardization organizations, Selected manufacturers, suppliers, services, Corrosion data, Machining data.

Download or read book Fatigue of Structures and Materials written by J. Schijve and published by Springer Science & Business Media. This book was released on 2008-12-16 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue of structures and materials covers a wide scope of different topics. The purpose of the present book is to explain these topics, to indicate how they can be analyzed, and how this can contribute to the designing of fatigue resistant structures and to prevent structural fatigue problems in service. Chapter 1 gives a general survey of the topic with brief comments on the signi?cance of the aspects involved. This serves as a kind of a program for the following chapters. The central issues in this book are predictions of fatigue properties and designing against fatigue. These objectives cannot be realized without a physical and mechanical understanding of all relevant conditions. In Chapter 2 the book starts with basic concepts of what happens in the material of a structure under cyclic loads. It illustrates the large number of variables which can affect fatigue properties and it provides the essential background knowledge for subsequent chapters. Different subjects are presented in the following main parts: • Basic chapters on fatigue properties and predictions (Chapters 2–8) • Load spectra and fatigue under variable-amplitude loading (Chapters 9–11) • Fatigue tests and scatter (Chapters 12 and 13) • Special fatigue conditions (Chapters 14–17) • Fatigue of joints and structures (Chapters 18–20) • Fiber-metal laminates (Chapter 21) Each chapter presents a discussion of a speci?c subject.

Download or read book Additive Manufacturing for the Aerospace Industry written by Francis H. Froes and published by Elsevier. This book was released on 2019-02-15 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing for the Aerospace Industry explores the design, processing, metallurgy and applications of additive manufacturing (AM) within the aerospace industry. The book's editors have assembled an international team of experts who discuss recent developments and the future prospects of additive manufacturing. The work includes a review of the advantages of AM over conventionally subtractive fabrication, including cost considerations. Microstructures and mechanical properties are also presented, along with examples of components fabricated by AM. Readers will find information on a broad range of materials and processes used in additive manufacturing. It is ideal reading for those in academia, government labs, component fabricators, and research institutes, but will also appeal to all sectors of the aerospace industry. - Provides information on a broad range of materials and processes used in additive manufacturing - Presents recent developments in the design and applications of additive manufacturing specific to the aerospace industry - Covers a wide array of materials for use in the additive manufacturing of aerospace parts - Discusses current standards in the area of aerospace AM parts

Download or read book Additive Manufacturing of Titanium Alloys written by Bhaskar Dutta and published by Butterworth-Heinemann. This book was released on 2016-06-17 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing of Titanium Alloys: State of the Art, Challenges and Opportunities provides alternative methods to the conventional approach for the fabrication of the majority of titanium components produced via the cast and wrought technique, a process which involves a considerable amount of expensive machining. In contrast, the Additive Manufacturing (AM) approach allows very close to final part configuration to be directly fabricated minimizing machining cost, while achieving mechanical properties at least at cast and wrought levels. In addition, the book offers the benefit of significant savings through better material utilization for parts with high buy-to-fly ratios (ratio of initial stock mass to final part mass before and after manufacturing). As titanium additive manufacturing has attracted considerable attention from both academicians and technologists, and has already led to many applications in aerospace and terrestrial systems, as well as in the medical industry, this book explores the unique shape making capabilities and attractive mechanical properties which make titanium an ideal material for the additive manufacturing industry. - Includes coverage of the fundamentals of microstructural evolution in titanium alloys - Introduces readers to the various Additive Manufacturing Technologies, such as Powder Bed Fusion (PBF) and Directed Energy Deposition (DED) - Looks at the future of Titanium Additive Manufacturing - Provides a complete review of the science, technology, and applications of Titanium Additive Manufacturing (AM)

Download or read book Titanium and Titanium Alloys written by Christoph Leyens and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an excellent reference for materials scientists and engineers needing to gain more knowledge about these engineering materials. Following introductory chapters on the fundamental materials properties of titanium, readers will find comprehensive descriptions of the development, processing and properties of modern titanium alloys. There then follows detailed discussion of the applications of titanium and its alloys in aerospace, medicine, energy and automotive technology.

Download or read book Tribology in Materials and Manufacturing written by Amar Patnaik and published by BoD – Books on Demand. This book was released on 2021-02-03 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology in Materials and Manufacturing - Wear, Friction and Lubrication brings an interdisciplinary perspective to accomplish a more detailed understanding of tribological assessments, friction, lubrication, and wear in advanced manufacturing. Chapters cover such topics as ionic liquids, non-textured and textured surfaces, green tribology, lubricants, tribolayers, and simulation of wear.

Download or read book Laser Additive Manufacturing of High Performance Materials written by Dongdong Gu and published by Springer. This book was released on 2015-04-21 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book entitled “Laser Additive Manufacturing of High-Performance Materials” covers the specific aspects of laser additive manufacturing of high-performance new materials components based on an unconventional materials incremental manufacturing philosophy, in terms of materials design and preparation, process control and optimization and theories of physical and chemical metallurgy. This book describes the capabilities and characteristics of the development of new metallic materials components by laser additive manufacturing process, including nanostructured materials, in situ composite materials, particle reinforced metal matrix composites, etc. The topics presented in this book, similar as laser additive manufacturing technology itself, show a significant interdisciplinary feature, integrating laser technology, materials science, metallurgical engineering and mechanical engineering. This is a book for researchers, students, practicing engineers and manufacturing industry professionals interested in laser additive manufacturing and laser materials processing. Dongdong Gu is a Professor at College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics (NUAA), PR China.

Download or read book ICAF 2019 Structural Integrity in the Age of Additive Manufacturing written by Antoni Niepokolczycki and published by Springer. This book was released on 2019-07-03 with total page 1164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers papers presented at the 36th conference and 30th Symposium of the International Committee on Aeronautical Fatigue and Structural integrity. Focusing on the main theme of “Structural Integrity in the Age of Additive Manufacturing”, the chapters cover different aspects concerning research, developments and challenges in this field, offering a timely reference guide to designers, regulators, manufacturer, and both researchers and professionals of the broad aerospace community.

Download or read book Fatigue in Additive Manufactured Metals written by Filippo Berto and published by Elsevier. This book was released on 2023-09-20 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue in Additive Manufactured Metals provides a brief overview of the fundamental mechanics involved in metal fatigue and fracture, assesses the unique properties of additive manufactured metals, and provides an in-depth exploration of how and why fatigue occurs in additive manufactured metals. Additional sections cover solutions for preventing it, best-practice design methods, and more. The book recommends cutting-edge evidence-based approaches for designing longer lasting additive manufactured metals, discusses the latest trends in the field and the various aspects of low cycle fatigue, and looks at both post-treatment and manufacturing process-based solutions. By providing international standards and testing procedures of additive manufactured metal parts and discussing the environmental impacts of additive manufacturing of metals and outlining simulation and modeling scenarios, this book is an ideal resource for users in industry. - Discusses the underlying mechanisms controlling the fatigue behavior of additive manufactured metal components as well as how to improve the fatigue life of these components via both manufacturing processes and post-processing - Studies the variability of properties in additive manufactured metals, the effects of different process conditions on mechanical reliability, probabilistic versus deterministic aspects, and more - Outlines nondestructive failure analysis techniques and highlights the effects of unique microstructural characteristics on fatigue in additive manufactured metals

Download or read book Proceedings of the International Conference on Industrial and Manufacturing Systems CIMS 2020 written by Ravi Pratap Singh and published by Springer Nature. This book was released on 2021-07-24 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to deal with the societal challenges novel technology plays an important role. For the advancement of technology, Department of Industrial and Production Engineering under the aegis of NIT Jalandhar is organizing an “International Conference on Industrial and Manufacturing Systems” (CIMS-2020) from 26th -28th June, 2020. The present conference aims at providing a leading forum for sharing original research contributions and real-world developments in the field of Industrial and Manufacturing Systems so as to contribute its share for technological advancements. This volume encloses various manuscripts having its roots in the core of industrial and production engineering. Globalization provides all around development and this development is impossible without technological contributions. CIMS-2020, gathered the spirits of various academicians, researchers, scientists and practitioners, answering the vivid issues related to optimisation in the various problems of industrial and manufacturing systems.

Download or read book State of the Art and Future Trends in Material Modeling written by Holm Altenbach and published by Springer Nature. This book was released on 2019-10-23 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special anniversary book celebrates the success of this Springer book series highlighting materials modeling as the key to developing new engineering products and applications. In this 100th volume of “Advanced Structured Materials”, international experts showcase the current state of the art and future trends in materials modeling, which is essential in order to fulfill the demanding requirements of next-generation engineering tasks.