Download or read book Fatigue of Micro Molded Materials Aluminum Bronze and Yttria Stabilized Zirconia written by Kennerknecht, Tobias and published by KIT Scientific Publishing. This book was released on 2014-12-04 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Custom built setups were developed to investigate micro samples during quasistatic and cyclic testing in tension, compression and bending. Micro molded CuAl10Ni5Fe4-samples showed similar fatigue behavior compared to macroscopic samples due to both the sample size and microstructure being scaled down with the manufacturing process. Results from cyclic three-point bending tests on micro molded 3Y-TZP suggested that a minimum crack extension is necessary to develop cyclically degradable shielding.

Download or read book Fatigue of Micro Molded Materials Aluminum Bronze and Yttria Stabilized Zirconia written by Tobias Kennerknecht and published by . This book was released on 2020-10-09 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Custom built setups were developed to investigate micro samples during quasistatic and cyclic testing in tension, compression and bending. Micro molded CuAl10Ni5Fe4-samples showed similar fatigue behavior compared to macroscopic samples due to both the sample size and microstructure being scaled down with the manufacturing process. Results from cyclic three-point bending tests on micro molded 3Y-TZP suggested that a minimum crack extension is necessary to develop cyclically degradable shielding. This work was published by Saint Philip Street Press pursuant to a Creative Commons license permitting commercial use. All rights not granted by the work's license are retained by the author or authors.

Download or read book Fatigue of Micro Molded Materials Aluminum Bronze and Yttria Stabilized Zirconia written by and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis deals with the nonlinear aspects of superconducting quantum interference devices (SQUIDs) as magnetic meta-atoms. Such meta-atoms are usually resonant structures that constitute the basic building blocks of a metamaterial with the purpose of giving the material unconventional magnetic properties. Due to their intrinsic nonlinearity, SQUIDs exhibit a number of phenomena such as frequency tunability and multi-stability that make them attractive as controllable meta-atoms.

Download or read book A novel micro mechanical model for prediction of multiaxial high cycle fatigue at small scales written by Eslami, Reza and published by KIT Scientific Publishing. This book was released on 2017-05-03 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: The grain microstructure and damage mechanisms at the grain level are the key factors that influence fatigue of metals at small scales. This is addressed in this work by establishing a new micro-mechanical model for prediction of multiaxial high cycle fatigue (HCF) at a length scale of 5-100?m. The HCF model considers elasto-plastic behavior of metals at the grain level and microstructural parameters, specifically the grain size and the grain orientation.

Download or read book Experimental Investigation of Crack Initiation in Face Centered Cubic Materials in the High and Very High Cycle Fatigue Regime written by Straub, Thomas and published by KIT Scientific Publishing. This book was released on 2016 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book investigates the fatigue mechanisms and crack initiation of Ni, Al and Cu on a small-scale in the Very High Cycle Fatigue regime by means of innovative fatigue experimentation. A novel custom-built resonant fatigue setup showed that the sample resonant frequency changes with increasing cycle number due to fatigue damage. Mechanisms such as slip band formation have been observed. Cyclic hardening, vacancy and oxidation formation may be considered as early fatigue mechanisms.

Download or read book Phase field modeling of microstructural pattern formation in alloys and geological veins written by Ankit, Kumar and published by KIT Scientific Publishing. This book was released on 2016-05-31 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the advent of high performance computing, the application areas of the phase-field method, traditionally used to numerically model the phase transformation in metals and alloys, have now spanned into geoscience. A systematic investigation of the two distinct scientific problems in consideration suggest a strong influence of interfacial energy on the natural and induced pattern formation in diffusion-controlled regime.

Download or read book Micromechanical study on the deformation behaviour of directionally solidified NiAl Cr eutectic composites written by Kumar, Amritesh and published by KIT Scientific Publishing. This book was released on 2017-11-06 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microplasticity of idealized single crystalline Ag cantilevers characterized with methods of high resolution written by Wobrock, Mark and published by KIT Scientific Publishing. This book was released on 2017-11-22 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Single crystalline, μm-sized cantilevers are fabricated out of epitaxially grown Ag thin films by a lithography-based procedure and are deflected by a nanoindenter system. The microstructure of the plastically deformed cantile-vers is investigated using transmission Kikuchi diffraction (TKD) on the cantilever cross section. 3D discrete dislocation dynamics simulations (DDD) are performed for further analysis. A mechanism to explain the formation of dislocation networks upon loading is suggested.

Download or read book Characterisation and Modelling of Continuous Discontinuous Sheet Moulding Compound Composites for Structural Applications written by Trauth, Anna and published by KIT Scientific Publishing. This book was released on 2020-12-11 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of this work is to significantly deepen the understanding of the material and the structural behaviour of continuous-discontinuous SMC composites, following a holistic approach to investigate microscopic aspects, macroscopic mechanical behaviour as well as failure evolution at the coupon, structure and component level. In addition, criteria to evaluate the effect of hybridisation are introduced and modelling approaches are presented and discussed.

Download or read book The Effects of Internal Stress and Lithium Transport on Fracture in Storage Materials in Lithium Ion Batteries written by Klinsmann, Markus and published by KIT Scientific Publishing. This book was released on 2016-03-08 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture of storage particles is considered to be one of the major reasons for capacity fade and increasing power loss in Li-ion batteries. In this work, we tackle the problem by merging a coupled model of mechanical stress and diffusion of Li-ions with a phase field description of an evolving crack. The novel approach allows us to study the evolution of the Li concentration together with the initiation and growth of a crack in an arbitrary geometry and without presuming a specific crack path.

Download or read book Structure evolution in tribological interfaces studied by multilayer model alloys written by Cihan, Ebru and published by KIT Scientific Publishing. This book was released on 2020-10-21 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent studies of deformation mechanisms of metals and alloys pioneer the better investigation of the friction and wear behavior of materials with well-defined initial microstructures. Within this scope, in this work, the effect of sub-surface deformations on the resulting friction and wear behavior has been searched by means of a systematic experimental study on Au-Ni metallic multilayer model alloy system.

Download or read book Influence of strain on the functionality of ink jet printed thin films and devices on flexible substrates written by Mishra, Nilesha and published by KIT Scientific Publishing. This book was released on 2019-02-15 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Impact of Recycling on the Fibre and the Composite Properties of Carbon Fibre Reinforced Plastics written by Hüther, Jonas Johannes and published by KIT Scientific Publishing. This book was released on 2020-06-19 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Consequences of hydroxyl generation by the silica water reaction Part II Global and local Swelling Part III Damage and Young s Modulus written by Fett, Theo and published by KIT Scientific Publishing. This book was released on 2022-07-11 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water diffusing into silica surfaces gives rise for several effects on diffusion behaviour and mechanical properties. In a preceding booklet, we focused on diffusion and fiber strengths and deformations which were obtained by water soaking under external loading. In the present booklet we deal with results and interpretations of strength increase in the absence of applied stresses.

Download or read book Consequences of hydroxyl generation by the silica water reaction Part I Diffusion and Swelling written by Fett, Theo and published by KIT Scientific Publishing. This book was released on 2022-07-11 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water diffusing into silica surfaces gives rise for several effectson diffusion behaviour and mechanical properties. Water added to silica glass increases its specific volume so that the silica expands near the surface. Mechanical boundary conditions give rise for compressive “swelling stresses”. This fact provides a tool for the interpretation of many experimental observations from literature.

Download or read book Phase field Modeling of Phase Changes and Mechanical Stresses in Electrode Particles of Secondary Batteries written by Zhang, Tao and published by KIT Scientific Publishing. This book was released on 2021-09-27 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most storage materials exhibit phase changes, which cause stresses and, thus, lead to damage of the electrode particles. In this work, a phase-field model for the cathode material NaxFePO4 of Na-ion batteries is studied to understand phase changes and stress evolution. Furthermore, we study the particle size and SOC dependent miscibility gap of the nanoscale insertion materials. Finally, we introduce the nonlocal species concentration theory, and show how the nonlocality influences the results.

Download or read book Characterization and Modeling of the Ratcheting Behavior of the Ferritic Martensitic Steel P91 written by Zhang, Kuo and published by KIT Scientific Publishing. This book was released on 2017-07-12 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this work, the ratcheting-behavior of 9%Cr-1%Mo ferritic-martensitic steel is studied with uniaxial cyclic loading. To describe the ratcheting-behavior of this steel, a visco-plastic constitutive model with consideration of cyclic softening of Reduced Activation Ferritic Martensitic steels is further modified, based on the analysis of back stress.