Download or read book Low Cycle Fatigue written by Harvey D. Solomon and published by ASTM International. This book was released on 1988 with total page 1289 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials Data for Cyclic Loading written by Chr. Boller and published by Elsevier. This book was released on 2013-10-22 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Data for Cyclic Loading, Part E: Cast and Welded Metals discusses the various criteria for the efficient selection of cast and welded metals. The book provides the comparison of various data to indicate strength of materials under variable amplitude loading. The presented data in the text include the chemical composition, monotonic properties, cyclic properties, and failure criterion. The book also provides the monotonic and cyclic test results of the materials. The date sheet also illustrates the diagram for strain-stress curves and strain life curve along with the stress- and strain-controlled constant amplitude tests. The text will be useful to researchers and practitioners of engineering, metallurgy, and physics.
Download or read book Fundamentals of Metal Fatigue Analysis written by Julie A. Bannantine and published by Pearson. This book was released on 1990 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book to present current methods and techniques of fatigue analysis, with a focus on developing basic skills for selecting appropriate analytical techniques. Contains numerous worked examples, chapter summaries, and problems. (vs. Fuchs/Stevens).
Download or read book Multiaxial Notch Fatigue written by Luca Susmel and published by Elsevier. This book was released on 2009-03-20 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal and composite components used in structural engineering not only contain geometrical features resulting in stress concentration phenomena, but they are also subjected to in-service multiaxial fatigue loading. To address the problem, structural engineers need reliable methodologies which allow for an adequate margin of safety. The book summarises methods devised by the author to design real components against multiaxial fatigue by taking full advantage not only of nominal but also of local stress-strain quantities.The book begins by reviewing definitions suitable for calculating the stress-strain quantities commonly used to perform fatigue assessment. The Modified Wöhler Curve Method is then explained in detail, by focusing attention on both the high- and the medium-cycle fatigue regime. The existing links between the multiaxial fatigue criterion and physical properties are also discussed. A procedure suitable for employing the method developed by the author to estimate fatigue damage both in notched and in welded components is explained. The Modified Manson-Coffin Curve method is investigated in depth, by reviewing those concepts playing a fundamental role in the so-called strain based approach. Lastly, the problem of performing the fatigue assessment of composite materials is addressed by considering design parameters influencing composite behaviour under complex cyclic loading paths and those criteria suitable for designing real components against multiaxial fatigue. The book also contains two appendices summarising experimental data from the technical literature. These appendices provide a unique and highly valuable resource for engineers. The appendices summarise around 100 values of the material characteristic length L, experimentally determined by testing specimens made of different engineering materials and about 4500 experimental fatigue results generated by testing plain, notched and welded specimens under constant-amplitude proportional and non-proportional multiaxial fatigue loading are listed. - Summarises methods devised by the author to design real components against multiaxial fatigue - Reviews definitions suitable for calculating the stress-strain quantities commonly used to perform fatigue assessment - Includes an in-depth explanation of both the Modified Wöhler Curve and Modified Manson-Coffin Curve Method
Download or read book ASM Specialty Handbook written by Joseph R. Davis and published by ASM International. This book was released on 1996-01-01 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cast iron offers the design engineer a low-cost, high-strength material that can be easily cast into a wide variety of useful, and sometimes complex, shapes. This handbook from ASM covers the entire spectrum of one of the most widely used and versatile of all metals.
Download or read book Fatigue of Structures and Materials written by Jaap Schijve and published by Springer Science & Business Media. This book was released on 2006-03-16 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is primarily a textbook. It is written for engineers, students and teachers, and it should also be useful for people working on various topics related to fatigue of structures and materials. The book can be used for graduate and undergraduate courses and for short courses for people already working in the industry, laboratories, or research institutes. Furthermore, the book offers various comments which can be useful to research-workers in order to consider the practical relevance of laboratory investigations and to plan future research. An important theme of the book is the understanding of what happens in the material of a structure in service if the structure is subjected to a spectrum of cyclic loads. Knowledge of the fatigue mechanism in the material and how it can be affected by a large variety of practical conditions is essential for dealing with fatigue problems. The designer of a dynamically loaded structure must “design against fatigue”. This includes not only the overall concept of the structure with related safety and economic aspects, but also questions on detail design, joints, production and material surface quality. At the same time, the designer must try to predict the fatigue performance of the structure. This requires a knowledge of the various influencing factors, also because predictions on fatigue have their limitations and shortcomings. Similar considerations arise if fatigue problems occur after a long period in service when decisions must be made on remedial actions.
Download or read book Material Data for Cyclic Loading written by Chr Boller and published by . This book was released on 1987 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multiaxial Notch Fracture and Fatigue written by Xiangqiao Yan and published by CRC Press. This book was released on 2023-02-28 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the unified fatigue life prediction equation for low/medium/high cycle fatigue of metallic materials relevant to plain materials and notched components. The unified fatigue life prediction equation is the Wöhler equation, in which the "stress-based intensity parameter" is calculated based on the linear-elastic analysis. A local approach for the static fracture analysis for notched components is presented based on the notch linear-elastic stress field. In the local approach, a stress intensity parameter is taken as a stress-based intensity parameter. Experimental verifications show that the local approach is also suited for the static fracture analysis for notched components made of ductile materials. The book is also concerned with a material failure problem under the multiaxial stress states. A concept of the material intensity parameter is introduced in this book. It is a material property parameter that depends on both Mode-I fracture toughness and Mode-II (or Mode-III) fracture toughness and the multiaxial parameter to characterize the variation of the material failure resistance (notch fracture toughness) with the multiaxial stresses states. The failure condition to assess mixed-mode fracture of notched (or cracked) components is stated as the stress-based intensity parameter being equal to the material intensity parameter. With respect to the traditional S-N equation, a similar S-N equation is presented and verified to have high accuracy. This book will be of interest to professionals in the field of fatigue and fracture for both brittle and ductile materials.
Download or read book Biaxial Multiaxial Fatigue and Fracture written by Andrea Carpinteri and published by Elsevier. This book was released on 2003-03-19 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European Structural Integrity Society (ESIS) Technical Commitee on Fatigue of Engineering Materials and Structures (TC3) decided to compile a Special Technical Publication (ESIS STP) based on the 115 papers presented at the 6th International Conference on Biaxial/Multiaxial Fatigue and Fracture. The 25 papers included in the STP have been extended and revised by the authors. The conference was held in Lisbon, Portugal, on 25-28 June 2001, and was chaired by Manual De Freitas, Instituto Superior Tecnico, Lisbon. The meeting, organised by the Instituto Superior Tecnico and sponsored by the Portuguese Minesterio da Cienca e da Tecnologia and by the European Structural Integrity Society, was attended by 151 delegates from 20 countries. The papers in the present book deal with the theoretical, numerical and experimental aspects of the Multiaxial fatigue and fracture of engineering materials and structures. They are divided in to the following six sections; Multiaxial Fatigue of Welded Structures; High cycle Multiaxial fatigue; Non proportional and Variable-Amplitude loading; Defects, Notches, Crack Growth; Low Cycle Multiaxial Fatigue; Applications and Testing Methods. As is well-known, most engineering components and structures in the mechanical, aerospace, power generation, and other industries are subjected to multiaxial loading during their service life. One of the most difficult tasks in design against fatigue and fracture is to translate the information gathered from uniaxial fatigue and fracture tests on engineering materials into applications involving complex states of cyclic stress-strain conditions. This book is the result of co-operation between many researchers from different laboratories, universities and industries in a number of countries.
Download or read book The Behavior in Tension Torsion and Flexure of Members Made of Brittle Materials written by James W. Baldwin (Jr.) and published by . This book was released on 1960 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Documents Center Index written by University of Illinois at Urbana-Champaign. Engineering Documents Center and published by . This book was released on 1986 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transactions of the American Foundrymen s Society written by American Foundrymen's Society and published by . This book was released on 1982 with total page 946 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ASM Handbook written by and published by . This book was released on 1990 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Notch Effects in Fatigue and Fracture written by G. Pluvinage and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: As Directors of this NATO Workshop, we welcome this opportunity to record formally our thanks to the NATO Scientific Affairs Division for making our meeting possible through generous financial support and encouragement. This meeting has two purposes: the first obvious one because we have collected scientists from East, far East and west to discuss new development in the field of fracture mechanics: the notch fracture mechanics. The second is less obvious but perhaps in longer term more important that is the building of bridges between scientists in the frame of a network called Without Walls Institute on Notch Effects in Fatigue and Fracture". Physical perception of notch effects is not so easy to understand as the presence of a geometrical discontinuity as a worst effect than the simple reduction of cross section. Notch effects in fatigue and fracture is characterised by the following fundamental fact: it is not the maximum local stress or stress which governs the phenomena of fatigue and fracture. The physic shows that a process volume is needed probably to store the necessary energy for starting and propagating the phenomenon. This is a rupture of the traditional "strength of material" school which always give the prior importance of the local maximum stress. This concept of process volume was strongly affirmed during this workshop.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1968 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Engineering Design SI Edition written by Ansel C. Ugural and published by CRC Press. This book was released on 2022-04-26 with total page 990 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Engineering Design, Third Edition, SI Version strikes a balance between theory and application, and prepares students for more advanced study or professional practice. Updated throughout, it outlines basic concepts and provides the necessary theory to gain insight into mechanics with numerical methods in design. Divided into three sections, the text presents background topics, addresses failure prevention across a variety of machine elements, and covers the design of machine components as well as entire machines. Optional sections treating special and advanced topics are also included. Features: Places a strong emphasis on the fundamentals of mechanics of materials as they relate to the study of mechanical design Furnishes material selection charts and tables as an aid for specific utilizations Includes numerous practical case studies of various components and machines Covers applied finite element analysis in design, offering this useful tool for computer-oriented examples Addresses the ABET design criteria in a systematic manner Presents independent chapters that can be studied in any order Mechanical Engineering Design, Third Edition, SI Version allows students to gain a grasp of the fundamentals of machine design and the ability to apply these fundamentals to various new engineering problems.
Download or read book Advanced Applications of Hydrogen and Engineering Systems in the Automotive Industry written by Luigi Cocco and published by BoD – Books on Demand. This book was released on 2021-04-28 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automobile industry is tremendously peculiar due to several strict requirements regarding functional reliability, safety standards, comfort level, high-volume production, and environmental limits. In addition, the industry is experiencing a disruptive evolution of modern vehicle research and design: electrification, connectivity, and autonomous driving. This book provides a robust overview of automotive engineering, including new proposals and the latest trends in road vehicle systems and sub-systems. Each chapter presents a rigorous analysis or a new solution in a clear and concise manner, such that professional and academic readers will appreciate both the theory dissertation and the industrial application.
