Download or read book Failure of Fibrous Composites written by P. W. R. Beaumont and published by . This book was released on 1981 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Failure of Fibrous Composites Part 1 Stress Concentrations Cracks and Notches Part 2 Toughness written by and published by . This book was released on 1981 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fibrous composite containing a notch or hole in monotonic loading exhibits premature cracking at stresses significantly lower than the ultimate strength; interfacial shear cracking, delamination or splitting, fibre fracture, matrix cracking and so forth. The formation of a damaged region is due to the concentration of localized tensile and shear stresses close to the noton front. The precise mode of failure depends upon the orientation of fibres and stacking geometry of the laminate; it is also sensitive to the properties of the matrix and fibre-matrix interface; and to the stress-state and environment. The article surveys the micromechanisms of crack extension in various classes of fibrous composites and includes models to account for the origins of toughness. (MM).

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Woven Fabric Composites written by Niranjan K. Naik and published by CRC Press. This book was released on 1993-11-27 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work is presented as an analytical methodology developed to study the thermo-elastic behavior of woven fabric composites. Also, experimental studies on the failure behavior of woven fabric composites are presented.

Download or read book Stress Concentrations in Laminated Composites written by Seng C. Tan and published by Routledge. This book was released on 2017-10-19 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the Author's PrefaceThe objective of this book is to provide a thorough and systematic study of the problem of laminated composites containing stress concentrations. Stress concentrations are introduced in laminated plates in the forms of circular holes, elliptical openings and straight cracks. These forms of cutouts have many practical applications, and are familiar to most engineers. Stress concentrations exist in all known structural components. Stress concentrations have great practical importance because they are normally the cause of failure. In addition to stress analyses of laminated composites, we need more fundamental understanding of the failure mode, the failure criterion, the effects on global laminate response, and the design of composites in the presence of stress concentrations. In this book, all the subjects studied are closely related to the problem of stress concentrations in laminated composites . . . . All the models are verified with many experimental results. The underlying objective of this comprehensive study is to give the readers an in-depth and thorough understanding of the problem of stress concentrations in composites. This book is the first to address the problem of laminated composites containing stress concentrations in a systematic way.

Download or read book Failure Analysis and Mechanisms of Failure of Fibrous Composite Structures written by and published by . This book was released on 1983 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Failure of Fibrous Composites written by Irene Jane Beyerlein and published by . This book was released on 1997 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fibrous Composites in Structural Design written by Edward M. Lenoe and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fourth Conference on Fibrous Composites in Structural Design was a successor to the First-to-Third Conferences on Fibrous Composites in Flight Vehicle Design sponsored by the Air Force (First and Second Conferences, September 1973 and May 1974) and by NASA (Third Conference, November 1975) which were aimed at focusing national attention on flight vehicle applications of a new class of fiber reinforced materials, the advanced com posites, which afforded weight savings and other advantages which had not been previously available. The Fourth Conference, held at San Diego, California, 14-17 November 1978, was the fi rst of these conferences to be jointly sponsored by the Army, Navy and Ai r Force together with NASA, as well as being the first to give attention to non-aerospace applications of fiber reinforced composites. While the design technology for aerospace applications has reached a state of relative maturity, other areas of application such as mi litary bridging, flywheel energy storage systems, ship and surface vessel components and ground vehicle components are in an early stage of development, and it was an important objective to pinpoint where careful attention to structural design was needed in such applications to achfeve maximum structural performance payoff together with a high level of reliability and attractive economics.

Download or read book Defects and Damage in Composite Materials and Structures written by Rikard Benton Heslehurst and published by CRC Press. This book was released on 2014-04-21 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advantages of composite materials include a high specific strength and stiffness, formability, and a comparative resistance to fatigue cracking and corrosion. However, not forsaking these advantages, composite materials are prone to a wide range of defects and damage that can significantly reduce the residual strength and stiffness of a structure or result in unfavorable load paths. Emphasizing defect identification and restitution, Defects and Damage in Composite Materials and Structures explains how defects and damage in composite materials and structures impact composite component performance. Providing ready access to an extensive, descriptive list of defects and damage types, this must-have reference: Examines defect criticality in composite structures Recommends repair actions to restore structural integrity Discusses failure modes and mechanisms of composites due to defects Reviews NDI processes for finding and identifying defects in composite materials Relating defect detection methods to defect type, the author merges his experience in the field of in-service activities for composite airframe maintenance and repair with indispensable reports and articles on defects and damage in advanced composite materials from the last 50 years.

Download or read book Fiber Matrix and Interface Properties written by Christopher J. Spragg and published by ASTM International. This book was released on 1996 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizing fiber-matrix adhesion and its characterization in composite materials, reports results from applying the most commonly used test methods, such as fragmentation, pull-out, and indentation, to high-performance composites and their constituents. The 13 papers were presented at a symposium i

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1967 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design Manufacturing and Applications of Composites Tenth Workshop 2014 written by Reza Vaziri and published by DEStech Publications, Inc. This book was released on 2015-03-04 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: New strategies on fillers, reinforcements, process modeling and SHM Discusses carbon fiber, ceramic, metal, and wood compositesApplications to wind turbines, aerospace, piping The tenth in an ongoing series, this large volume contains 44 papers published for the first time on the behavior, process modeling and testing of composites, written by well-known researchers from universities and research centers in Japan and Canada. Special attention is given to advances in reinforcements, manufacturing, and sensing methods for SHM of composite processes and damage. Key words include: braided composites, nanotube, graphene nanoplatelet, moisture effects, structural health, functionally graded shells, curvilinear composite, lignin, sensors, piezoelectric, and damage sensing.

Download or read book NASA Technical Memorandum written by and published by . This book was released on 1988 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Engine Structures written by and published by . This book was released on 1988 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metal Polymer Multi Material Structures and Manufacturing Techniques in Transportation written by Sergio T. Amancio-Filho and published by MDPI. This book was released on 2020-12-10 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reduction of greenhouse gas emissions—particularly from fossil fuel-powered vehicles and airplanes by means of weight savings and leaner fuel consumption, helps to restrain environmental impacts. In general, for a variety of industries, and specifically in the case of transport, where both weight savings and increased energy efficiency are pursued, the use of metal–polymer multi-material structures has been growing at an increasing and particularly fast pace in recent years. Several manufacturing techniques have been, or are being, developed, with the aim of being used for producing dissimilar materials in cost-efficient manners. This book presents recent developments in the state of the art of advanced additive manufacturing and the joining of metal–polymer multi-material structures in transportation. This publication mainly focuses on the correlations between microstructure, manufacturing process (i.e., AddJoining, adhesive bonding, friction riveting, friction-based staking and friction spot joining) properties, and the mechanical performance of metal–polymer multi-material structures.

Download or read book The Structural Integrity of Carbon Fiber Composites written by Peter W. R Beaumont and published by Springer. This book was released on 2016-11-26 with total page 954 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together a diverse compilation of inter-disciplinary chapters on fundamental aspects of carbon fiber composite materials and multi-functional composite structures: including synthesis, characterization, and evaluation from the nano-structure to structure meters in length. The content and focus of contributions under the umbrella of structural integrity of composite materials embraces topics at the forefront of composite materials science and technology, the disciplines of mechanics, and development of a new predictive design methodology of the safe operation of engineering structures from cradle to grave. Multi-authored papers on multi-scale modelling of problems in material design and predicting the safe performance of engineering structure illustrate the inter-disciplinary nature of the subject. The book examines topics such as Stochastic micro-mechanics theory and application for advanced composite systems Construction of the evaluation process for structural integrity of material and structure Nano- and meso-mechanics modelling of structure evolution during the accumulation of damage Statistical meso-mechanics of composite materials Hierarchical analysis including "age-aware," high-fidelity simulation and virtual mechanical testing of composite structures right up to the point of failure. The volume is ideal for scientists, engineers, and students interested in carbon fiber composite materials, and other composite material systems.

Download or read book The Theory of Critical Distances written by David Taylor and published by Elsevier. This book was released on 2010-07-07 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Critical distance methods are extremely useful for predicting fracture and fatigue in engineering components. They also represent an important development in the theory of fracture mechanics. Despite being in use for over fifty years in some fields, there has never been a book about these methods – until now. So why now? Because the increasing use of computer-aided stress analysis (by FEA and other techniques) has made these methods extremely easy to use in practical situations. This is turn has prompted researchers to re-examine the underlying theory with renewed interest. The Theory of Critical Distances begins with a general introduction to the phenomena of mechanical failure in materials: a basic understanding of solid mechanics and materials engineering is assumed, though appropriate introductory references are provided where necessary. After a simple explanation of how to use critical distance methods, and a more detailed exposition of the methods including their history and classification, the book continues by showing examples of how critical distance approaches can be applied to predict fracture and fatigue in different classes of materials. Subsequent chapters include some more complex theoretical areas, such as multiaxial loading and contact problems, and a range of practical examples using case studies of real engineering components taken from the author's own consultancy work. The Theory of Critical Distances will be of interest to a range of readers, from academic researchers concerned with the theoretical basis of the subject, to industrial engineers who wish to incorporate the method into modern computer-aided design and analysis. - Comprehensive collection of published data, plus new data from the author's own laboratories - A simple 'how-to-do-it' exposition of the method, plus examples and case studies - Detailed theoretical treatment - Covers all classes of materials: metals, polymers, ceramics and composites - Includes fracture, fatigue, fretting, size effects and multiaxial loading