Download or read book Facility Effluent Monitoring Plan Determination for Waste Sampling and Characterization Facility WSCF written by and published by . This book was released on 2001 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents material required for the facility effluent monitoring plan (FEMP) determination for the Waste Sampling and Characterization Facility (WSCF) Analytical Laboratory. Information discussed in the first four sections of ''A Guide for Preparing Hanford Site Facility Effluent Monitoring Plans'' (WHC-EP-0438-1) is contained in this document and includes the following: (1) Introductory material--definitions of terms that might be used in the guidance material; regulations; standards; brief facility/process description; characterization of potential source terms; and description of effluent paths, or references from which the facility description or effluent information is obtained; (2) Regulations and standards applicable to effluent releases and monitoring; and (3) Information that was used in preparing the FEMP Determination Forms (Attachment 2).

Download or read book written by and published by . This book was released on 2001 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Statement of Work for Services Provided by the Waste Sampling and Characterization Facility for the Effluent and Environmental Monitoring Program Calendar Year 1999 written by and published by . This book was released on 1999 with total page 35 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document defines the services that the Waste Sampling and Characterization Facility (WSCF) shall provide the Environmental Compliance Program (ECP) throughout the calendar year for effluent and environmental monitoring (EEM) analysis. One of the purposes of EEM is to monitor liquid and gaseous effluents and the environment immediately around facilities that might contain radioactive and hazardous materials. Monitoring data are collected, evaluated, and reported to determine the degree of compliance with applicable federal and state regulations and permits.

Download or read book Statement of Work for Services Provided by the Waste Sampling and Characterization Facility for the Effluent and Environmental Monitoring Program During Calendar Year 1997 written by and published by . This book was released on 1997 with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document defines the services the Waste Sampling & Characterization Facility (WSCF) shall provide the Effluent and Environmental Monitoring Program (EEM) throughout the calendar year for analysis. The purpose of the EEM Program is to monitor liquid and gaseous effluents, and the environment immediately around the facilities which may contain radioactive and hazardous materials. Monitoring data are collected, evaluated, and reported to determine their degree of compliance with applicable federal and state regulations and permits. The Appendix identifies the samples EEM plans to submit for analysis in CY-1997. Analysis of effluent (liquid and air discharges) and environmental (air, liquid, animal, and vegetative) samples is required using standard laboratory procedures, in accordance with regulatory and control requirements cited in Quality Assurance Program Plan for Radionuclide Airborne Emissions Monitoring (especially Appendix G) (VTHC 1995a), Effluent Monitoring Quality Assurance Project Plan for Radionuclide Airborne Emissions Data (WHC 1995b), Operational Environmental Monitoring Program Quality Assurance Project Plan (WHC 1994b), and Hanford Analytical Services Quality Assurance Requirements Documents (DOE 1996). Should changes to this document be necessary, WSCF or the Air & Water Services (A & WS) Organization may amend it at any time with a jointly approved internal memo.

Download or read book Statement of Work for Services Provided by the Waste Sampling and Characterization Facility for the Effluent and Environmental Monitoring Program During Calendar Year 1998 written by and published by . This book was released on 1998 with total page 31 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document defines the services the Waste Sampling and Characterization Facility (WSCF) shall provide the Effluent and Environmental Monitoring Program (EEM) throughout the calendar year for analysis. The purpose of the EEM Program is to monitor liquid and gaseous effluents, and the environment immediately around the facilities which may contain radioactive and hazardous materials. Monitoring data are collected, evaluated, and reported to determine their degree of compliance with applicable federal and state regulations and permits. The Appendix identifies the samples EEM plans to submit for analysis in CY-1998. Analysis of effluent (liquid and air discharges) and environmental (air, liquid, animal, and vegetative) samples is required using standard laboratory procedures, in accordance with regulatory and control requirements cited in Quality Assurance Program Plan for Radionuclide Airborne Emissions Monitoring (especially Appendix G) (WHC 1995a), Effluent Monitoring Quality Assurance Project Plan for Radionuclide Airborne Emissions Data (WHC 1995b), Near-Facility Environmental Monitoring Quality Assurance Project Plan (WMNW 1997), and Hanford Analytical Services Quality Assurance Requirements Documents (DOE 1996). Should changes to this document be necessary, WSCF or the Waste Management Federal Services, Inc. (WMH) Air and Water Services (AWS) Organization may amend it at any time with a jointly approved internal memo.

Download or read book Statement of Work SOW for Services Provided by the Waste Sampling and Characterization Facility for the Effluent and Environmental Monitoring Program During Calendar Year 1998 written by and published by . This book was released on 1998 with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document defines the services the Waste Sampling and Characterization Facility (WSCF) shall provide the Effluent and Environmental Monitoring Program (EEM) throughout the calendar year for analysis. The purpose of the EEM Program is to monitor liquid and gaseous effluents, and the environment immediately around the facilities which may contain radioactive and hazardous materials. Monitoring data are collected, evaluated, and reported to determine their degree of compliance with applicable federal and state regulations and permits.

Download or read book Waste Sampling and Characterization Facility WSCF written by and published by . This book was released on 1994 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Statement of Work for Services Provided by the Waste Sampling and Characterization Facility for Effluent Monitoring During Calendar Year 1996 written by and published by . This book was released on 1996 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Facility Effluent Monitoring Plan Determinations for the 400 Area Facilities written by Joe M. Nickels and published by . This book was released on 1991 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Facility Effluent Monitoring Plan Determinations for the 300 Area Facilities written by Joe M. Nickels and published by . This book was released on 1991 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 200 Area Treated Effluent Disposal Facility TEDF Effluent Sampling and Analysis Plan written by and published by . This book was released on 2000 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Sampling and Analysis Plan (SAP) has been developed to comply with effluent monitoring requirements at the 200 Area Treated Effluent Disposal Facility (TEDF), as stated in Washington State Waste Discharge Permit No. ST 4502 (Ecology 2000). This permit, issued by the Washington State Department of Ecology (Ecology) under the authority of Chapter 90.48 Revised Code of Washington (RCW) and Washington Administrative Code (WAC) Chapter 173-216, is an April 2000 renewal of the original permit issued on April 1995.

Download or read book Facility Effluent Monitoring Plan Determinations for the Operations Support Services Facilities 100 200 300 400 and 1100 Areas written by Joe M. Nickels and published by . This book was released on 1991 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Facility Effluent Monitoring Plan for the 222 S Laboratory written by Alfred Vern Robinson and published by . This book was released on 1991 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Facility Effluent Monitoring Plan for the B Plant written by J. E. Lesser and published by . This book was released on 1994 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Unit Dose Calculation Methods and Summary of Facility Effluent Monitoring Plan Determinations written by Joe M. Nickels and published by . This book was released on 1991 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Radioactive Waste Management written by and published by . This book was released on 1995-08 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 200 Area TEDF Effluent Sampling and Analysis Plan written by and published by . This book was released on 1995 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: This sampling analysis sets forth the effluent sampling requirements, analytical methods, statistical analyses, and reporting requirements to satisfy the State Waste Discharge Permit No. ST4502 for the Treated Effluent Disposal Facility. These requirements are listed below: Determine the variability in the effluent of all constituents for which enforcement limits, early warning values and monitoring requirements; demonstrate compliance with the permit; and verify that BAT/AKART (Best Available Technology/All know and Reasonable Treatment) source, treatment, and technology controls are being met.