Download or read book Fabrication of SiC magnesium Alloy Composite Via Friction Stir Processing written by Ahmad Z. Naser and published by . This book was released on 2016 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: "One of the most interesting improvements in the history of materials is composites manufacturing. Because of their ability to improve different mechanical properties of some metals, nanoparticles have been given much attention in the composites community. After the successful use and popularity of Friction Stir Welding (FSW) in many applications worldwide, its latest modification into Friction Stir Processing (FSP) has recently been given a considerable amount of attention. FSP can be considered today as one of the most successful alternatives for fabricating metal matrix composite. In this investigation, a Silicon Carbide (SiC)/magnesium alloy composite was fabricated using FSP. Different combinations of tool rotational and translational speeds (RS and TS) were used throughout the study. The effect of such combination on the thermal profile, micro-hardness, and microstructure was studied and compared. Furthermore, a Response-Surface Methodology was used to develop a model to predict the micro-hardness for FSPed specimens using different combinations of process parameters. FSP of Mg AZ 31B as well as Mg/SiC composite was successfully accomplished using different combinations of tool rotational and translational speeds. Micro-hardness results showed excellent agreement with both the thermal and microstructural analysis. Micro-hardness results of the Mg/SiC composite showed a significant amount of improvement. The developed micro-hardness model was very accurate in predicting the micro-hardness values."--Abstract.
Download or read book Composite Fabrication on Age Hardened Alloy using Friction Stir Processing written by Namrata Gangil and published by CRC Press. This book was released on 2020-12-13 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This up-to-date reference text discusses the fabrication technique for strengthening of high specific strength alloys including age-hardened aluminum alloys for several industrial applications. The text presents an exhaustive overview of the materials used in the aircraft construction in general and age-hardened aluminum alloys in particular. The text discusses important concepts including surface composite fabrication using friction stir processing (FSP), FSP tools, effect of reinforcement particles, and conditions that affect strengthening during surface composite fabrication on age-hardened aluminum alloys. The text will facilitate the readers to control parameters and avoid conditions that lead to a net negative impact on the resulting composites and select the one that lead to a net gain. It will enable the readers, researchers, and professionals to plan and practice composite fabrication via FSP with a benefit of net strengthening. The understanding of specific strength of materials used in applications including aerial vehicles and manufacturing is important. The proposed text highlights importance of age-hardened alloy as one of the materials used for diverse applications. It discusses strengthening strategies of existing age-hardened aluminum alloys through composite fabrication via a solid-state FSP route. The text will help students and professionals working in the field of manufacturing, materials science, and aerospace engineering. The text discusses an important aspect of strengthening age-hardened alloy using solid-state friction stir processing for diverse applications in industries including manufacturing and aviation. It will serve as an ideal reference for graduate students, academic researchers, and professionals in the field of mechanical engineering, aerospace engineering, and materials science. It will also be helpful to the professionals working in the aviation and manufacturing industries.
Download or read book Metal Matrix Composites by Friction Stir Processing written by Ranjit Bauri and published by Butterworth-Heinemann. This book was released on 2017-08-10 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Matrix Composites by Friction Stir Processing discusses the capabilities of utilizing friction stir processing (FSP) as a tool to manufacture new materials, such as composites. FSP is considered a tool for grain refinement. However, this work illustrates how FSP has a wider capability due to the material flow and mixing the process offers. This book highlights such aspects by demonstrating the ability of the process to incorporate a second phase and make metal matrix composites (MMCs). The book covers the current research on processing MMCs by FSP, and presents a novel approach of making ductile MMCs by FSP using metal particle reinforcements. Demonstrates how friction stir processing can be used to make metal matrix composites Includes a review of different approaches of making metal matrix composites by friction stir processing Demonstrates the utility of friction stir processing in making new types of non-equilibrium ductile composites Provides a comparison of properties of friction stir processed composites to those of conventional metal matrix composites
Download or read book Recent Advances in Mechanical Engineering written by Mohammad Muzammil and published by Springer Nature. This book was released on 2020-12-28 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected peer-reviewed papers presented at the International Conference on Innovative Technologies in Mechanical Engineering (ITME) 2019. The book discusses a wide range of topics in mechanical engineering such as mechanical systems, materials engineering, micro-machining, renewable energy, systems engineering, thermal engineering, additive manufacturing, automotive technologies, rapid prototyping, computer aided design and manufacturing. This book, in addition to assisting students and researchers working in various areas of mechanical engineering, can also be useful to researchers and professionals working in various allied and interdisciplinary fields.
Download or read book Friction Stir Welding and Processing written by Sandeep Rathee and published by John Wiley & Sons. This book was released on 2024-03-25 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: A single source of information on the fundamental concepts and latest research applications of friction stir welding and processing Friction Stir Welding and Processing: Fundamentals to Advancements provides concise yet comprehensive coverage of the field of friction stir welding, with an eye toward future research directions and applications. Throughout the book, case studies provide real-world context and highlight applications for various engineering sectors. With contributions from an array of leaders in the field, Friction Stir Welding and Processing provides readers with a single source of information on all aspects of FSW and FSP. After explaining the fundamentals of friction stir welding (FSW) and its variants, the book discusses composite fabrication techniques using friction stir processing (FSP). Different types of friction techniques are covered, as is the equipment used. Detailed characterization of samples and composites are included. Additional topics discussed include the impact of FSW on the economics of production, methods for coupling FSW/FSP with additive manufacturing, composite fabrication, and process-property relationships. Master the basic concepts of friction stir welding and its variants Discover the role of FSW in developing hybrid manufacturing techniques Follow case studies that connect theoretical concepts to real-world experimental results Learn from contributions from an array of global thought leaders in the field This is a valuable compendium on the topic for engineers and designers who utilize welding and advanced manufacturing across industries, as well as graduate students and post-graduate researchers who are exploring new friction stir welding applications.
Download or read book Friction Stir Processing of Aluminium Alloy Using Multipass Technique written by Dr. Chandan Deep Singh and published by BookRix. This book was released on 2018-01-16 with total page 71 pages. Available in PDF, EPUB and Kindle. Book excerpt: FSP is manufacturing the Technique used to modify the microstructure metals. In this process a rotating tool is penetrated in the work piece and moved in the transverse direction.Further FSP technique is used for fabrication of surface composite on aluminium substrate and homogenization of powder metallurgy aluminium alloy, metal matrix composites, and the cast aluminium alloys. By this process material properties can be improved due to enhancement of grain structure. With this technique the material have shown good corrosion resistance, high strength and high fatigue resistance.
Download or read book Composite Fabrication on Age Hardened Alloy using Friction Stir Processing written by Namrata Gangil and published by CRC Press. This book was released on 2020-12-13 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: This up-to-date reference text discusses the fabrication technique for strengthening of high specific strength alloys including age-hardened aluminum alloys for several industrial applications. The text presents an exhaustive overview of the materials used in the aircraft construction in general and age-hardened aluminum alloys in particular. The text discusses important concepts including surface composite fabrication using friction stir processing (FSP), FSP tools, effect of reinforcement particles, and conditions that affect strengthening during surface composite fabrication on age-hardened aluminum alloys. The text will facilitate the readers to control parameters and avoid conditions that lead to a net negative impact on the resulting composites and select the one that lead to a net gain. It will enable the readers, researchers, and professionals to plan and practice composite fabrication via FSP with a benefit of net strengthening. The understanding of specific strength of materials used in applications including aerial vehicles and manufacturing is important. The proposed text highlights importance of age-hardened alloy as one of the materials used for diverse applications. It discusses strengthening strategies of existing age-hardened aluminum alloys through composite fabrication via a solid-state FSP route. The text will help students and professionals working in the field of manufacturing, materials science, and aerospace engineering. The text discusses an important aspect of strengthening age-hardened alloy using solid-state friction stir processing for diverse applications in industries including manufacturing and aviation. It will serve as an ideal reference for graduate students, academic researchers, and professionals in the field of mechanical engineering, aerospace engineering, and materials science. It will also be helpful to the professionals working in the aviation and manufacturing industries.
Download or read book Fabrication of Surface Metal Matrix Composites Using Friction Stir Processing written by Saman Sahraeinejad and published by . This book was released on 2014 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction stir processing has been employed to produce metal matrix composites by incorporating reinforcement particles in an Al 5059 matrix. Various particles with sizes from 130 nm to 4.3 um, and different process parameters, were examined to obtain a uniform distribution of particles within the processed region. Mechanical properties (i.e. tensile and microhardness) of the Al 5059 matrix metal matrix composites reinforced with Al2O3, SiC, and B4C were tested and compared. Tensile tests demonstrated increases in yield strength by 20, 32, and 38 percent compared to the matrix alloy for composites containing Al2O3, SiC, and B4C, respectively. The average microhardness value within the stir zone increased from 85 HV in the base material to a maximum of 170 HV in the B4C-reinforced composite. Particle refinement during friction stir processing was more pronounced with micron-sized particles, and virtually insignificant for nano-sized particles. Nano-scale particles seem to be more efficient in increasing the hardness when a similar fraction is used compared to micro-sized particles.
Download or read book Advances in Friction Stir Welding and Processing written by M.-K. Besharati-Givi and published by Elsevier. This book was released on 2014-12-08 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction-stir welding (FSW) is a solid-state joining process primarily used on aluminum, and is also widely used for joining dissimilar metals such as aluminum, magnesium, copper and ferrous alloys. Recently, a friction-stir processing (FSP) technique based on FSW has been used for microstructural modifications, the homogenized and refined microstructure along with the reduced porosity resulting in improved mechanical properties. Advances in friction-stir welding and processing deals with the processes involved in different metals and polymers, including their microstructural and mechanical properties, wear and corrosion behavior, heat flow, and simulation. The book is structured into ten chapters, covering applications of the technology; tool and welding design; material and heat flow; microstructural evolution; mechanical properties; corrosion behavior and wear properties. Later chapters cover mechanical alloying and FSP as a welding and casting repair technique; optimization and simulation of artificial neural networks; and FSW and FSP of polymers. Provides studies of the microstructural, mechanical, corrosion and wear properties of friction-stir welded and processed materials Considers heat generation, heat flow and material flow Covers simulation of FSW/FSP and use of artificial neural network in FSW/FSP
Download or read book Utilizing Friction Stir Techniques for Composite Hybridization written by Sagar, Prem and published by IGI Global. This book was released on 2024-07-24 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the captivating landscape of advanced manufacturing, the utilization of friction stir techniques for composite hybridization has ignited a paradigm shift, opening up a plethora of possibilities at the intersection of innovation and application. This transformative approach not only enhances the structural integrity and performance of materials but also paves the way for more sustainable and efficient production processes. As researchers continue to refine these methods, the potential for groundbreaking advancements in material science and engineering remains boundless. Utilizing Friction Stir Techniques for Composite Hybridization explores the realm of advanced materials science and manufacturing. It provides a detailed examination of how friction stir processes can be strategically applied to composite materials for achieving unparalleled advancements in performance, durability, and functionality. Covering topics such as corrosion, fatigue behavior, and sustainability, this book is a vital resource for professionals, researchers, educators, academicians, and postgraduate students.
Download or read book Metal Matrix Composites written by Karl U. Kainer and published by John Wiley & Sons. This book was released on 2006-08-21 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the properties of MMCs can be directly designed "into" the material, they can fulfill all the demands set by design engineers. This book surveys the latest results and development possibilities for MMCs as engineering and functional materials, making it of utmost value to all materials scientists and engineers seeking in-depth background information on the potentials these materials have to offer in research, development and design engineering.
Download or read book Surface Engineering by Friction Assisted Processes written by B. Ratna Sunil and published by CRC Press. This book was released on 2019-10-08 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is a comprehensive resource that compiles extensive descriptions of friction stir processing, fabrication of surface metal matrix composites, and friction surfacing into one volume. The book is separated into four sections, beginning with a discussion of surface tailoring of metals by friction stir processing. This first section delves into the basics of friction stir processing (FSP), incorporating illustrations to explain the supporting mechanisms of this process. This section culminates with the introduction of potential applications of FSP in the manufacturing industry and obstacles that may arise when implemented. The following two sections explore and discuss surface metal matrix composites by friction stir processing and surface engineering by friction surfacing. They provide a thorough explanation of the material systems involved in the respective processes and discuss in detail the mechanisms behind each. The book, which closes with a comprehensive discussion of recent developments in friction-assisted processes and their functionality, offers a unique compilation of information on these increasingly prominent developments in the field of surface engineering. This volume organizes the information in a manner that is both easily accessible and comprehensible, utilizing visuals such as figures, tables, and photographs to enhance readers’ understanding. Key features: • Explores a multitude of topics within the field of surface engineering at length • Summarizes and explores the mechanical foundation of friction stir processing, fabrication of surface metal matrix composites, and friction surfacing • Incorporates figures and tables to aid in illustrating the concepts discussed • Offers potential applications and discusses future benefits of specific elements pertaining to surface engineering
Download or read book Casting and Solidification of Light Alloys written by Alexander Vorozhtsov and published by MDPI. This book was released on 2020-12-15 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Investigation of the effect of casting and crystallization on the structure and properties of the resulting light alloys and, in particular, research connected with detailed analysis of the microstructure of light alloys obtained using various external influences of ultrasonic, vibration, magnetic, and mechanical processing on the casting and crystallization are discussed. Research on the study of introduction of additives (modifiers, reinforcers, including nanosized ones, etc.) into the melt during the crystallization process, the technological properties of casting (fluidity, segregation, shrinkage, etc.), the structure and physicomechanical properties of light alloys are also included.
Download or read book Composite and Composite Coatings written by Mohamed Thariq Hameed Sultan and published by CRC Press. This book was released on 2022-02-10 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applications of composite materials and composite coatings have been increasing in the field of automobile and aerospace industries due to the versatility in their properties. Present book comprehensively reviews the composite materials and coatings with a focus on the mechanical and tribology applications. It covers type of fibres (natural and synthetic), reinforcements and their selection, matrix, and technologies used to produce composite materials. Various sections cover basics and associated failures of composites, strengthening mechanisms and background theories, composite manufacturing technologies, mechanical and tribology properties of past and currently used composites. Features:- Covers different types of fibers, reinforcements, matrix, and technologies used to produce composite materials. Details the tribology behavior of different novel composite coatings fabricated using different coating techniques. Reviews research on wear behavior of composite materials and coatings. Discusses reinforcement behavior with respect to the different processing routes. Illustrates rule of mixtures, failures, theories behind the strengthening mechanism. This book aims at professionals, graduate students and researchers in mechanical engineering, design engineering, composite materials, composite coatings, tribology, automobile, and aircraft.
Download or read book Recycling of Plastics Metals and Their Composites written by R.A. Ilyas and published by CRC Press. This book was released on 2021-12-28 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: Having a solid understanding of materials recycling is of high importance, especially due to the growing use of composites in many industries and increasingly strict legislation and concerns about the disposal of composites in landfills or by incineration. Recycling of Plastics, Metals, and Their Composites provides a comprehensive review of the recycling of waste polymers and metal composites. It provides the latest advances and covers the fundamentals of recycled polymers and metal composites, such as preparation, morphology, and physical, mechanical, thermal, and flame-retardancy properties. FEATURES Offers a state-of-the-art review of the recycling of polymer composites and metal composites for sustainability Describes a life-cycle analysis to help readers understand the true potential value and market for these recycled materials Details potential applications of recycled polymer and metal composites Includes the performance of natural fiber–reinforced recycled thermoplastic polymer composites under aging conditions and the recycling of multi-material plastics Covers recycling technologies, opportunities, and challenges for polymer-matrix composites This book targets technical professionals in the metal and polymer industries as well as researchers, scientists, and advanced students. It is also of interest to decision makers at material suppliers, recycled metal and polymer product manufacturers, and governmental agencies working with recycled metal and polymer composites.
Download or read book Advances in Materials Processing and Manufacturing Applications written by Amar Patnaik and published by Springer Nature. This book was released on 2021-06-22 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers from the International Conference on Advances in Materials Processing and Manufacturing Applications (iCADMA 2020), held on November 5–6, 2020, at Malaviya National Institute of Technology, Jaipur, India. iCADMA 2020 proceedings is divided into four topical tracks – Advanced Materials, Materials Manufacturing and Processing, Engineering Optimization and Sustainable Development, and Tribology for Industrial Application.
Download or read book Advances in Manufacturing for Aerospace Alloys written by Selim Gürgen and published by Springer Nature. This book was released on with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: