Download or read book Fabrication Characterization and Application of High Temperature Superconducting Mercury Based Cuprate Thin Films written by and published by . This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major experimental achievements obtained during the project period are summarized in the following session. Existing problems and possible solutions are also discussed. Details associated to each specific subject can be found in 5 US patent disclosures (2 awarded. 1 transferred to industry. and 2 pending) and 37 papers (31 published/accepted and 6 submitted) and among them 35 are referred journal articles and 2 are conference proceedings). Objectives were: Fabrication of Epitaxial Hg-based HTS thin films; Characterization of physical properties of the film; Application in microelectronics.

Download or read book The Fabrication and the Characterization of Hg based Cuprate Superconducting Thin Films written by Sang-Ho Yun and published by . This book was released on 1996 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Manufacture of High Temperature Superconducting Tapes and Films written by Kurt A. Richardson and published by Universal-Publishers. This book was released on 1999-11 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: The phenomena of superconductivity has enormous industrial potential, but the penetration of superconductor-based products has, thus far, been slow. An indisputable fact is that there are prizes, and profits, for the teams that solve the critical problems in understanding and processing these complex materials. The continuous processing of superconducting tapes and wires is a necessary stage that will open up the industrial market to the designers of a diverse range of time and energy saving devices, particularly in ultra-fast computing and lossless power transmission. The aim of the research reported herein was to investigate the fabrication of superconducting tapes and films via two different processes, namely: the established PIT technique, and a less well known electrochemical route. The PIT research yielded partially textured (a characteristic not found in previously reported thallium-based PIT tapes) and high purity tapes with promising transport properties. The main subject of this work is the electrodeposition of superconducting films with particular emphasis on the optimisation of the deposition process, as opposed to the optimisation of the post-deposition heat treatment. This is not a well researched area. Therefore the research herein deals with the mechanisms of the deposition process in order to achieve a high standard of reproducibility in producing a variety of superconductor precursor films. The heat-treatment of the as-deposited films was determined, and results are presented concerning the characteristics of the resulting superconducting films. An attempt was made to fabricate, for the first time via electrodeposition, (Tl, Pb)-1223 films. Superconductivity was successfully observed in both Bismuth- and Thallium-based films. Extensive further work is required, but the impact upon society from superconducting devices draws ever nearer.

Download or read book Preparation and Characterization of High Temperature Superconducting Thin Films microform written by Steven K. (Steven Kelly) Dew and published by National Library of Canada. This book was released on 1989 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fabrication of High temperature Superconducting Thin Films on Various Substrates for Electronic Applications written by Kaiyuan Chen and published by . This book was released on 1997 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Study of the Fabrication and Characterisation of High Temperature Superconductor YBa2Cu3O7 Thin Films written by Aihua Li and published by . This book was released on 2006 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fabrication Characterization and Properties of Nd2 x Cex CuO4 y Superconducting Thin Films and Heterostructures written by Sining Mao and published by . This book was released on 1995 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fabrication and Characterization of Superconducting PLD MgB2 Thin Films written by Yue Zhao and published by . This book was released on 2005 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2566 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Superconducting Materials written by David A. Cardwell and published by CRC Press. This book was released on 2003 with total page 1120 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the advent of High Temperature Superconductivity and the increasing reliability of fabrication techniques, superconductor technology has moved firmly into the mainstream of academic and industrial research. There is currently no single source of practical information giving guidance on which technique to use for any particular category of superconductor. An increasing number of materials scientists and electrical engineers require easy access to practical information, sensible advice and guidance on 'best-practice' and reliable, proven fabrication and characterisation techniques.The Handbook will be the definitive collection of material describing techniques for the fabrication and analysis of superconducting materials. In addition to the descriptions of techniques, authoritative discussions written by leading researchers will give guidance on the most appropriate technique for a particular situation.Characterisation and measurement techniques will form an important part of the Handbook, providing researchers with a standard reference for experimental techniques. The tutorial style description of these techniques makes the Handbook particularly suitable for use by graduate students.The Handbook will be supported by a comprehensive web site which will be updated with new data as it emerges.The Handbook has six main sections: -- Fundamentals of Superconductivity - characteristic properties, elementary theory, critical current of type II superconductors-- Processing - bulk materials, wires and tapes, thick and think films, contact techniques-- Characterisation Techniques - structure/microstructure, measurement and interpretation of electromagnetic properties,measurement of physics properties-- Materials - characteristic properties of low and high Tc materials-- Applications - high current applications, trapped flux devices, high frequency devices, josephson junction devic

Download or read book Hg based High Tc Superconductors written by and published by Nova Publishers. This book was released on 1997 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Non contact Characterization of High Temperature Superconducting Thin Films written by Rajarao Jammy and published by . This book was released on 1993 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High temperature Superconductor Thin Films and Devices written by David Kun Chin and published by . This book was released on 1990 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fabrication of High Temperature Superconducting Thin Films for Radiation Detection written by Hung-hua Li and published by . This book was released on 1991 with total page 91 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Processing and Characterization of High Temperature Superconductor Thin Films Deposited by Electron Beam Co evaporation written by Jeong-Uk Huh and published by . This book was released on 2006 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Superconductivity written by David A. Cardwell and published by CRC Press. This book was released on 2022-07-05 with total page 1088 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first of three volumes of the extensively revised and updated second edition of the Handbook of Superconductivity. The past twenty years have seen rapid progress in superconducting materials, which exhibit one of the most remarkable physical states of matter ever to be discovered. Superconductivity brings quantum mechanics to the scale of the everyday world where a single, coherent quantum state may extend over a distance of metres, or even kilometres, depending on the size of a coil or length of superconducting wire. Viable applications of superconductors rely fundamentally on an understanding of this intriguing phenomena and the availability of a range of materials with bespoke properties to meet practical needs. This first volume covers the fundamentals of superconductivity and the various classes of superconducting materials, which sets the context and background for Volumes 2 and 3. Key Features: Covers the depth and breadth of the field Includes contributions from leading academics and industry professionals across the world Provides hands-on guidance to the manufacturing and processing technologies A comprehensive reference, this handbook is suitable for both graduate students and practitioners in experimental physics, materials science and multiple engineering disciplines, including electronic and electrical, chemical, mechanical, metallurgy and others.

Download or read book High Temperature Superconductors Materials Properties and Applications written by Rainer Wesche and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: The discovery by J. G. Bednorz and K. A. Mtllier in 1986 that the superconducting state can exist in oxides at temperatures above 30 K stimulated research in the field of superconductivity and opened up a new field of research. Within a few years a large number of cuprate superconductors with transition temperatures well above the boiling point of liquid nitrogen have been found. The possibility of using liquid nitrogen as coolant re-stimulated interest in power applications of supercon ductivity. In this book an overview of the known high-Te superconductors and their physical properties is presented. Aspects related to conductor fabrication and high-current applications are emphasised. The material should be suitable for use in graduate level courses on superconductivity. Researchers in the field may profit from the large number of tables and references describing its status at the end of 1997. An introduction to high-To superconductivity must be based on the fundamental physical principles of normal-state electrical conductivity and the well-known characteristics of conventional superconductors. In Chapter 2 this background is provided. Crystal structures, anisotropic properties and general trends of the critical temperatures of the cuprate superconductors are described in Chapters 3 and 4. The processing of superconductor powders addressed in Chapter 5 affects considerably the current-carrying capacity of high-T. wires. In Chapter 6 several fabrication techniques for superconducting wires are described. In addition, the factors limiting the transport critical currents ofhigh-Te wires are discussed.