Download or read book Fabrication and Electrochemical Characterization of Individually addressable Submicron Band Electrode Arrays written by Milind P. Nagale and published by . This book was released on 1998 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Microfabricated Tools for Electrochemical Imaging and Sensing written by Todd Johnathan Anderson and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This dissertation covers the development of microfabricated bipolar ultramicroelectrode arrays consisting of many thousands of individually addressable electrodes to enable high resolution electrochemical imaging. Two different devices are presented and discussed prior to characterization in several proof-of-concept experiments, after which one of the array designs is utilized in the creation of a high-throughput electrocatalyst screening platform. Additionally, a micromachining procedure for the fabrication of glass-supported solid-state nanopore substrates is introduced. Chapter 1 opens with an introduction to various electrochemical imaging techniques and examines bipolar coupling to an optical reporter reaction as a method for simultaneously reading the current through very dense electrode arrays. The advantages of such a scheme are further explored from the perspective of efficient electrocatalytic screening before the chapter concludes with a discussion of possible solutions to the issues associated with high frequency biomolecule detection via resistive pulse sensing in solid-state nanopores. Chapter 2 then presents a submicron bipolar microelectrode array design which utilizes interfering laser beams to generate the requisite periodic electrode patterns. The shortcomings of this design are addressed in Chapter 3 with the fabrication of an updated device which is used to image several dynamic electrochemical systems via an alternate imaging scheme. This updated device is further utilized in Chapter 4 as a platform for highly parallelized screening of compositionally varied electrocatalyst samples. Chapter 5 then closes this dissertation with the introduction of a novel microfabrication method for freestanding SiNx membranes on glass chips as a means of eliminating the capacitive noise effects associated with semiconductor/insulator interfaces in high bandwidth solid-state nanopore measurements.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 1998 with total page 878 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fabrication and Characterization of Two Types of Micro electrode Arrays written by Neal Sleszynski and published by . This book was released on 1988 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fabrication and Characterization of Three dimensional Half cell Electrode Arrays written by George Baure (Jr.) and published by . This book was released on 2004 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book American Doctoral Dissertations written by and published by . This book was released on 1997 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Extended Abstracts written by Electrochemical Society and published by . This book was released on 1995 with total page 1712 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Semiconductor Material and Device Characterization written by Dieter K. Schroder and published by John Wiley & Sons. This book was released on 2015-06-29 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Third Edition updates a landmark text with the latest findings The Third Edition of the internationally lauded Semiconductor Material and Device Characterization brings the text fully up-to-date with the latest developments in the field and includes new pedagogical tools to assist readers. Not only does the Third Edition set forth all the latest measurement techniques, but it also examines new interpretations and new applications of existing techniques. Semiconductor Material and Device Characterization remains the sole text dedicated to characterization techniques for measuring semiconductor materials and devices. Coverage includes the full range of electrical and optical characterization methods, including the more specialized chemical and physical techniques. Readers familiar with the previous two editions will discover a thoroughly revised and updated Third Edition, including: Updated and revised figures and examples reflecting the most current data and information 260 new references offering access to the latest research and discussions in specialized topics New problems and review questions at the end of each chapter to test readers' understanding of the material In addition, readers will find fully updated and revised sections in each chapter. Plus, two new chapters have been added: Charge-Based and Probe Characterization introduces charge-based measurement and Kelvin probes. This chapter also examines probe-based measurements, including scanning capacitance, scanning Kelvin force, scanning spreading resistance, and ballistic electron emission microscopy. Reliability and Failure Analysis examines failure times and distribution functions, and discusses electromigration, hot carriers, gate oxide integrity, negative bias temperature instability, stress-induced leakage current, and electrostatic discharge. Written by an internationally recognized authority in the field, Semiconductor Material and Device Characterization remains essential reading for graduate students as well as for professionals working in the field of semiconductor devices and materials. An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department.
Download or read book Nanoporous Gold written by Arne Wittstock and published by Royal Society of Chemistry. This book was released on 2012-03-28 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-surface-area materials have recently attracted significant interest due to potential applications in various fields such as electrochemistry and catalysis, gas-phase catalysis, optics, sensors and actuators, energy harvesting and storage. In contrast to classical materials the properties of high-surface-area materials are no longer determined by their bulk, but by their nanoscale architecture. Nanoporous gold (np-Au) represents the fascinating class of mesoporous metals that have been intensively investigated in recent years. The current interest and the increasing number of scientific publications show that np-Au by itself is an outstanding nano-material that justifies a book devoted to all aspects of its properties and applications. The resulting publication is a discussion of this unique nano-material and is an accessible and comprehensive introduction to the field. The book provides a broad, multi-disciplinary platform to learn more about the properties of nanoporous gold from an inter-disciplinary perspective. It starts with an introduction and overview of state-of-the-art applications and techniques characterizing this material and its applications. It then covers the progress in research within the last years. The chapters are in-depth overviews written by the world's leading scientists in the particular field. Each chapter covers one technique or application so that the reader can easily target their favoured topic and will get the latest and state-of-the-art information in the field.
Download or read book Electric Field Analysis written by Sivaji Chakravorti and published by CRC Press. This book was released on 2017-12-19 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric Field Analysis is both a student-friendly textbook and a valuable tool for engineers and physicists engaged in the design work of high-voltage insulation systems. The text begins by introducing the physical and mathematical fundamentals of electric fields, presenting problems from power and dielectric engineering to show how the theories are put into practice. The book then describes various techniques for electric field analysis and their significance in the validation of numerically computed results, as well as: Discusses finite difference, finite element, charge simulation, and surface charge simulation methods for the numerical computation of electric fields Provides case studies for electric field distribution in a cable termination, around a post insulator, in a condenser bushing, and around a gas-insulated substation (GIS) spacer Explores numerical field calculation for electric field optimization, demonstrating contour correction and examining the application of artificial neural networks Explains how high-voltage field optimization studies are carried out to meet the desired engineering needs Electric Field Analysis is accompanied by an easy-to-use yet comprehensive software for electric field computation. The software, along with a wealth of supporting content, is available for download with qualifying course adoption.
Download or read book Next Generation Nanoelectrochemistry written by Royal Society of Chemistry and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Faraday Discussions volume addresses the challenges in both fundamental and applied nanoelectrochemistry, where new concepts and new knowledge play key roles.
Download or read book Handbook of Industrial Crystallization written by Allan Myerson and published by Butterworth-Heinemann. This book was released on 2002-01-08 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crystallization is an important separation and purification process used in industries ranging from bulk commodity chemicals to specialty chemicals and pharmaceuticals. In recent years, a number of environmental applications have also come to rely on crystallization in waste treatment and recycling processes.The authors provide an introduction to the field of newcomers and a reference to those involved in the various aspects of industrial crystallization. It is a complete volume covering all aspects of industrial crystallization, including material related to both fundamentals and applications. This new edition presents detailed material on crystallization of biomolecules, precipitation, impurity-crystal interactions, solubility, and design.Provides an ideal introduction for industrial crystallization newcomers Serves as a worthwhile reference to anyone involved in the fieldCovers all aspects of industrial crystallization in a single, complete volume
Download or read book Nanofabrication written by Ampere A. Tseng and published by World Scientific. This book was released on 2008 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many of the devices and systems used in modern industry are becoming progressively smaller and have reached the nanoscale domain. Nanofabrication aims at building nanoscale structures, which can act as components, devices, or systems, in large quantities at potentially low cost. Nanofabrication is vital to all nanotechnology fields, especially for the realization of nanotechnology that involves the traditional areas across engineering and science. This is the first book solely dedicated to the manufacturing technology in nanoscale structures, devices, and systems and is designed to satisfy the growing demands of researchers, professionals, and graduate students. Both conventional and non-conventional fabrication technologies are introduced with emphasis on multidisciplinary principles, methodologies, and practical applications. While conventional technologies consider the emerging techniques developed for next generation lithography, non-conventional techniques include scanning probe microscopy lithography, self-assembly, and imprint lithography, as well as techniques specifically developed for making carbon tubes and molecular circuits and devices. Sample Chapter(s). Chapter 1: Atom, Molecule, and Nanocluster Manipulations for Nanostructure Fabrication Using Scanning Probe Microscopy (3,320 KB). Contents: Atomic Force Microscope Lithography (N Kawasegi et al.); Nanowire Assembly and Integration (Z Gu & D H Gracias); Extreme Ultraviolet Lithography (H Kinoshita); Electron Projection Lithography (T Miura et al.); Electron Beam Direct Writing (K Yamazaki); Electron Beam Induced Deposition (K Mitsuishi); Focused Ion Beams and Interaction with Solids (T Ishitani et al.); Nanofabrication of Nanoelectromechanical Systems (NEMS): Emerging Techniques (K L Ekinci & J Brugger); and other papers. Readership: Researchers, professionals, and graduate students in the fields of nanoengineering and nanoscience.
Download or read book Aggregation of Therapeutic Proteins written by Wei Wang and published by John Wiley & Sons. This book was released on 2010-12-28 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives pharmaceutical scientists an up-to-date resource on protein aggregation and its consequences, and available methods to control or slow down the aggregation process. While significant progress has been made in the past decade, the current understanding of protein aggregation and its consequences is still immature. Prevention or even moderate inhibition of protein aggregation has been mostly experimental. The knowledge in this book can greatly help pharmaceutical scientists in the development of therapeutic proteins, and also instigate further scientific investigations in this area. This book fills such a need by providing an overview on the causes, consequences, characterization, and control of the aggregation of therapeutic proteins.
Download or read book Lithium Batteries written by Gholam-Abbas Nazri and published by Springer Science & Business Media. This book was released on 2009-01-14 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lithium Batteries: Science and Technology is an up-to-date and comprehensive compendium on advanced power sources and energy related topics. Each chapter is a detailed and thorough treatment of its subject. The volume includes several tutorials and contributes to an understanding of the many fields that impact the development of lithium batteries. Recent advances on various components are included and numerous examples of innovation are presented. Extensive references are given at the end of each chapter. All contributors are internationally recognized experts in their respective specialty. The fundamental knowledge necessary for designing new battery materials with desired physical and chemical properties including structural, electronic and reactivity are discussed. The molecular engineering of battery materials is treated by the most advanced theoretical and experimental methods.
Download or read book Cochlear and Brainstem Implants written by Aage R. Møller and published by Karger Medical and Scientific Publishers. This book was released on 2006-01-01 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today cochlear implants are the most successful of all prostheses of the nervous system. They are used in individuals who are deaf or suffer from a severe hearing deficiency caused by loss of cochlear hair cells. Auditory brainstem implants provide stimulation of the cochlear nucleus and are used in patients with an auditory nerve dysfunction, a deformed cochlea which does not allow cochlear implantation, or traumatic auditory nerve injury. In this volume different aspects of cochlear implantation such as the role of neural plasticity, the interaction with the development of the auditory system, and the optimal time of implantation in children (sensitive periods) are discussed in detail. Further, the processors and the algorithms used in modern cochlear implants are described The second part is devoted to auditory brainstem implants. It describes surgical techniques, methods for intraoperative testing as well as speech processing. It also deals with electrical stimulation of neural tissue and the neurophysiologic basis for cochlear and brainstem implants. The publication provides the latest scientific and clinical knowledge on cochlear and brainstem implants and is highly recommended to audiologists, otolaryngologists and also neurosurgeons.
Download or read book Electrophoretic Deposition of Nanomaterials written by James H. Dickerson and published by Springer Science & Business Media. This book was released on 2011-09-18 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of contemporary basic research, emerging technology, and commercial and industrial applications associated with the electrophoretic deposition of nanomaterials. This presentation of the subject includes an historical survey, the underlying theory of electrophoresis, dielectrophoresis, and the colloidal deposition of materials. This is followed by an assessment of the experimental equipment and procedures for electrophoretic and dielectrophoretic aggregation, manipulation, and deposition of nanoparticles, nanotubes, and other nanomaterials. Additional chapters explore the specific science and technology of electrophoretic film formation, using widely studied and application-driven nanomaterials, such as carbon nanotubes, luminescent nanocrystals, and nano-ceramics. The concluding chapters explore industrial applications and procedures associated with electrophoretic deposition of nanomaterials.
