Download or read book Fabrication and Characterization of Novel Transparent Laminated Glass composite Panels for Dynamic Load Mitigation written by Hua Zhu and published by . This book was released on 2014 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bomb threats and attacks are common in many parts of the world today. One of the significant effects of a blast is damage to the glass windows in nearby buildings. The debris produced from the damaged windows, especially the sharp glass fragments produced, can lead to severe injuries and even casualties. One way to mitigate the damage is to use blast-resistant laminated glass, which is conventionally made of one or more polyvinyl butyral (PVB) interlayer sandwiched between two or more glass sheets, for windows. Although the PVB interlayer is widely used in the world, it still has some disadvantages, such as low strength to weight ratio which results in large thickness and increased weight of the laminated glass. The low strength to weight ratio problem can be solved by replacing the PVB interlayer with a transparent glass fiber-reinforced polymer composite interlayer, because glass fiber-reinforced composites have high strength to weight ratio and potentially higher fracture toughness. By using the glass fiber-reinforced composite interlayer, the thickness and weight of the laminated glass can be potentially reduced. A laminated glass panel utilizing a newly developed transparent glass fiber-reinforced composite interlayer has been fabricated in this study. The transparent composite interlayer was obtained by matching the refractive index of the polyester resin matrix with that of E-glass fibers. The light transmittance of the fabricated laminated glass is above 60% over the light wavelength range of 482 nm to 700 nm with the highest transmittance is 84.4% when the light wavelength is 577 nm. The composite interlayer's mechanical properties under both quasi-static and dynamic loading conditions have been characterized. In addition, the fabricated glass panels were tested under various blast loading conditions. The panels perform well under U.S. General Services Administration (GSA) specified C, D and E blast loading levels. In this research, the dynamic response, in terms of the midpoint deflection, of the fabricated laminated glass under blast loading has been analytically investigated using model-based method and finite element method. Failure analysis of the laminated glass was performed using the stress analysis approach.
Download or read book Advanced Composite Materials for Aerospace Engineering written by Sohel Rana and published by Woodhead Publishing. This book was released on 2016-04-26 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Composite Materials for Aerospace Engineering: Processing, Properties and Applications predominately focuses on the use of advanced composite materials in aerospace engineering. It discusses both the basic and advanced requirements of these materials for various applications in the aerospace sector, and includes discussions on all the main types of commercial composites that are reviewed and compared to those of metals. Various aspects, including the type of fibre, matrix, structure, properties, modeling, and testing are considered, as well as mechanical and structural behavior, along with recent developments. There are several new types of composite materials that have huge potential for various applications in the aerospace sector, including nanocomposites, multiscale and auxetic composites, and self-sensing and self-healing composites, each of which is discussed in detail. The book's main strength is its coverage of all aspects of the topics, including materials, design, processing, properties, modeling and applications for both existing commercial composites and those currently under research or development. Valuable case studies provide relevant examples of various product designs to enhance learning. - Contains contributions from leading experts in the field - Provides a comprehensive resource on the use of advanced composite materials in the aerospace industry - Discusses both existing commercial composite materials and those currently under research or development
Download or read book Structural Use of Glass written by Matthias Haldimann and published by IABSE. This book was released on 2008 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book attempts to redress this issue by providing an overview of the recent developments in this field thereby providing a basis for the understanding of the structural performance and design of glass in buildings. Each chapter draws on the latest developments in practice and research and contains contributions from various international glass experts. The mix of general and specialist content ranging from rules of thumb to fracture mechanics and novel applications to post-breakage performance make this book useful to practitioners and researchers. Furthermore, the text is supplemented by tables of the major codes of practice and by an extensive list of references.
Download or read book Composites Industry Abstracts written by and published by . This book was released on 1996 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Defects and Damage in Composite Materials and Structures written by Rikard Benton Heslehurst and published by CRC Press. This book was released on 2014-04-21 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advantages of composite materials include a high specific strength and stiffness, formability, and a comparative resistance to fatigue cracking and corrosion. However, not forsaking these advantages, composite materials are prone to a wide range of defects and damage that can significantly reduce the residual strength and stiffness of a structure or result in unfavorable load paths. Emphasizing defect identification and restitution, Defects and Damage in Composite Materials and Structures explains how defects and damage in composite materials and structures impact composite component performance. Providing ready access to an extensive, descriptive list of defects and damage types, this must-have reference: Examines defect criticality in composite structures Recommends repair actions to restore structural integrity Discusses failure modes and mechanisms of composites due to defects Reviews NDI processes for finding and identifying defects in composite materials Relating defect detection methods to defect type, the author merges his experience in the field of in-service activities for composite airframe maintenance and repair with indispensable reports and articles on defects and damage in advanced composite materials from the last 50 years.
Download or read book Bioinspired Structures and Design written by Wole Soboyejo and published by Cambridge University Press. This book was released on 2020-09-17 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master simple to advanced biomaterials and structures with this essential text. Featuring topics ranging from bionanoengineered materials to bio-inspired structures for spacecraft and bio-inspired robots, and covering issues such as motility, sensing, control and morphology, this highly illustrated text walks the reader through key scientific and practical engineering principles, discussing properties, applications and design. Presenting case studies for the design of materials and structures at the nano, micro, meso and macro-scales, and written by some of the leading experts on the subject, this is the ideal introduction to this emerging field for students in engineering and science as well as researchers.
Download or read book Composite Materials written by Kamal K. Kar and published by Springer. This book was released on 2016-10-14 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials are used as substitutions of metals/traditional materials in aerospace, automotive, civil, mechanical and other industries. The present book collects the current knowledge and recent developments in the characterization and application of composite materials. To this purpose the volume describes the outstanding properties of this class of advanced material which recommend it for various industrial applications.
Download or read book Index to Theses with Abstracts Accepted for Higher Degrees by the Universities of Great Britain and Ireland and the Council for National Academic Awards written by and published by . This book was released on 1995 with total page 1138 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theses on any subject submitted by the academic libraries in the UK and Ireland.
Download or read book Biofiber Reinforcements in Composite Materials written by Omar Faruk and published by Elsevier. This book was released on 2014-09-25 with total page 775 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural fiber-reinforced composites have the potential to replace synthetic composites, leading to less expensive, stronger and more environmentally-friendly materials. This book provides a detailed review on how a broad range of biofibers can be used as reinforcements in composites and assesses their overall performance. The book is divided into five major parts according to the origins of the different biofibers. Part I contains chapters on bast fibers, Part II; leaf fibers, Part III; seed fibers, Part IV; grass, reed and cane fibers, and finally Part V covers wood, cellulosic and other fibers including cellulosic nanofibers. Each chapter reviews a specific type of biofiber providing detailed information on the sources of each fiber, their cultivation, how to process and prepare them, and how to integrate them into composite materials. The chapters outline current and potential applications for each fiber and discuss their main strengths and weaknesses. - The book is divided into five major parts according to the origins of the different biofibers - bast, leaf, seed; grass, reed and cane fibers, and finally wood, cellulosic and other fibers including cellulosic nanofibers. - This book provides a detailed review on how a broad range of biofibers can be used as reinforcements in composites and assesses their overall performance - The chapters outline current and potential applications for each fiber and discuss their main strengths and weaknesses
Download or read book Glare written by Ad Vlot and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Glare is the name given to a new material for aircraft structures developed at Delft University in the Netherlands. It consists of thin aluminium layers bonded together by adhesive containing embedded fibres and is very resistant to fatigue. This book gives the inside story of how the development of Glare took place. It took more than two decades from the first tests in Delft to the major breakthrough following the decision of Airbus to apply the material on the A380 super-jumbo. This success was achieved by a small group of people inspired by professor Boud Vogelesang, people who kept believing in the material and fought against all obstacles during the years. This book tells the story of the ups and downs and the final success of their efforts.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1997 with total page 940 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Impact Behaviour of Fibre Reinforced Composite Materials and Structures written by S. R. Reid and published by Elsevier. This book was released on 2000-10-12 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study covers impact response, damage tolerance and failure of fibre-reinforced composite materials and structures. Materials development, analysis and prediction of structural behaviour and cost-effective design all have a bearing on the impact response of composites and this book brings together for the first time the most comprehensive and up-to-date research work from leading international experts. - State of the art analysis of impact response, damage tolerance and failure of FRC materials - Distinguished contributors provide expert analysis of the most recent materials and structures - Valuable tool for R&D engineers, materials scientists and designers
Download or read book Photomechanics written by Pramod K. Rastogi and published by Springer Science & Business Media. This book was released on 2003-07-01 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting the use of photonics techniques for measurement in mechanics, this book provides a state-of-the-art review of this active and rapidly growing field. It serves as an invaluable resource for readers to explore the current status and includes a wealth of information on the essential principles and methods. It provides a substantial background in a concise and simple way to enable physicists and engineers to assess, analyze and implement experimental systems needed to solve their specific measurement problems.
Download or read book Hybrid Natural Fiber Composites written by Anish Khan and published by Woodhead Publishing. This book was released on 2021-01-21 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research on natural fiber composites is an emerging area in the field of polymer science with tremendous growth potential for commercialization. Hybrid Natural Fiber Composites: Material Formulations, Processing, Characterization, Properties, and Engineering Applications provides updated information on all the important classes of natural fibers and their composites that can be used for a broad range of engineering applications. Leading researchers from industry, academia, government, and private research institutions from across the globe have contributed to this highly application-oriented book. The chapters showcase cutting-edge research discussing the current status, key trends, future directions, and opportunities. Focusing on the current state of the art, the authors aim to demonstrate the future potential of these materials in a broad range of demanding engineering applications. This book will act as a one-stop reference resource for academic and industrial researchers working in R&D departments involved in designing composite materials for semi structural engineering applications. - Presents comprehensive information on the properties of hybrid natural fiber composites that demonstrate their ability to improve the hydrophobic nature of natural fiber composites - Reviews recent developments in the research and development of hybrid natural fiber composites in various engineering applications - Focuses on modern technologies and illustrates how hybrid natural fiber composites can be used as alternatives in structural components subjected to severe conditions
Download or read book Manufacturing of Polymer Composites written by B. Tomas Astrom and published by Routledge. This book was released on 2018-04-27 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: The potential application areas for polymer composites are vast. While techniques and methodologies for composites design are relatively well established, the knowledge and understanding of post-design issues lag far behind. This leads to designs and eventually composites with disappointing properties and unnecessarily high cost, thus impeding a wider industrial acceptance of polymer composites. Manufacturing of Polymer Composites completely covers pre- and post-design issues. While the book enables students to become fully comfortable with composites as a possible materials choice, it also provides sufficient knowledge about manufacturing-related issues to permit them to avoid common pitfalls and unmanufacturable designs. The book is a fully comprehensive text covering all commercially significant materials and manufacturing techniques while at the same time discussing areas of research and development that are nearing commercial reality.
Download or read book Advances in Lightweight Materials and Structures written by A. Praveen Kumar and published by Springer Nature. This book was released on 2020-10-13 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Advanced Lightweight Materials and Structures (ICALMS) 2020, and discusses the triad of processing, structure, and various properties of lightweight materials. It provides a well-balanced insight into materials science and mechanics of both synthetic and natural composites. The book includes topics such as nano composites for lightweight structures, impact and failure of structures, biomechanics and biomedical engineering, nanotechnology and micro-engineering, tool design and manufacture for producing lightweight components, joining techniques for lightweight structures for similar and dissimilar materials, design for manufacturing, reliability and safety, robotics, automation and control, fatigue and fracture mechanics, and friction stir welding in lightweight sandwich structures. The book also discusses latest research in composite materials and their applications in the field of aerospace, construction, wind energy, automotive, electronics and so on. Given the range of topics covered, this book can be a useful resource for beginners, researchers and professionals interested in the wide ranging applications of lightweight structures.
Download or read book Energy Absorption of Structures and Materials written by G Lu and published by Elsevier. This book was released on 2003-10-31 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important study focuses on the way in which structures and materials can be best designed to absorb kinetic energy in a controllable and predictable manner. Understanding of energy absorption of structures and materials is important in calculating the damage to structures caused by accidental collision, assessing the residual strength of structures after initial damage and in designing packaging to protect its contents in the event of impact. Whilst a great deal of recent research has taken place into the energy absorption behaviour of structures and materials and significant progress has been made, this knowledge is diffuse and widely scattered. This book offers a synthesis of the most recent developments and forms a detailed and comprehensive view of the area. It is an essential reference for all engineers concerned with materials engineering in relation to the theory of plasticity, structural mechanics and impact dynamics. - Important new study of energy absorption of engineering structures and materials - Shows how they can be designed to withstand sudden loading in a safe, controllable and predictable way - Illuminating case studies back up the theoretical analysis
