Download or read book Fabrication and Analysis of Multifunctional Carbon Nanotube Electrical Conductors written by Andrew Robert Bucossi and published by . This book was released on 2018 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Carbon nanotube (CNT) bulk conductors have been proposed as an alternative material to metals for power and data transmission applications due to their light weight, flexure tolerance, and chemical stability. However, current fabrication technologies prevent bulk CNT wires from matching the electrical properties of individual CNTs, providing opportunity for researchers to improve CNT wire fabrication. In this work, CNT conductors have been advanced using high-purity laser-vaporized single wall carbon nanotubes (SWCNTs). Acid dispersion and extrusion of SWCNTs into a coagulant bath was used to fabricate wires and systematic modification of the process has determined that coagulation dynamics govern the resulting wire properties. Extrusion of highly aligned and dense, acid-doped SWCNT wires yielded wires with record-setting electrical conductivities of 5.1 MS/m. An extrusion apparatus has been designed and built to scale up the fabrication process and has reduced variability in wire conductivity from 30% to 6% for samples 10’s of meters long. The high-current behavior of extruded SWCNT wires and commercially available CNT yarns has been investigated in a variety of ambient conditions. Comparison of electrical testing scenarios has determined that voltage-controlled testing is the proper method of characterizing CNT wires at high currents. Maximum current densities of 420 MA/m2 for extruded SWCNT wires were reached in helium, 10x greater than that reached in helium by commercial CNT yarns and exceeding fuse-law behavior for aluminum wires of equivalent diameter. Further work to enhance CNT electrical conductivity was conducted using IBr chemical doping. Electrical enhancement of commercial CNT sheets and dopant adsorption were correlated and determined to be solvent dependent. A mechanism is proposed where low-dipole moment solvent systems favor the IBr-CNT interaction over the IBr-solvent and the solvent-CNT interactions. The optimal IBr doping conditions from the work were applied to commercial CNT yarns leading to an improvement in conductivity of 13.4x to a value of 1.4 MS/m. High voltage testing in air shows a 36% increase in maximum current, compared to as-received commercial CNT yarns. This dissertation research demonstrates the importance of SWCNT purity and selection of coagulation conditions to promote high-density, aligned SWCNT wires. Delivery of chemical dopants with high electrochemical potential through solvents which favor dopant-CNT interactions enhances electrical conductivity and maximum current density, achieving CNT wires capable of competing with metal conductors for electrical transmission applications."--Abstract.
Download or read book Carbon Nanotube Reinforced Polymers written by Roham Rafiee and published by Elsevier. This book was released on 2017-10-06 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotube-Reinforced Polymers: From Nanoscale to Macroscale addresses the advances in nanotechnology that have led to the development of a new class of composite materials known as CNT-reinforced polymers. The low density and high aspect ratio, together with their exceptional mechanical, electrical and thermal properties, render carbon nanotubes as a good reinforcing agent for composites. In addition, these simulation and modeling techniques play a significant role in characterizing their properties and understanding their mechanical behavior, and are thus discussed and demonstrated in this comprehensive book that presents the state-of-the-art research in the field of modeling, characterization and processing. The book separates the theoretical studies on the mechanical properties of CNTs and their composites into atomistic modeling and continuum mechanics-based approaches, including both analytical and numerical ones, along with multi-scale modeling techniques. Different efforts have been done in this field to address the mechanical behavior of isolated CNTs and their composites by numerous researchers, signaling that this area of study is ongoing. - Explains modeling approaches to carbon nanotubes, together with their application, strengths and limitations - Outlines the properties of different carbon nanotube-based composites, exploring how they are used in the mechanical and structural components - Analyzes the behavior of carbon nanotube-based composites in different conditions
Download or read book Carbon Nanotubes written by Mohamed Berber and published by BoD – Books on Demand. This book was released on 2016-07-20 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows the recent advances of the applications of carbon nanotubes (CNTs), in particular, the polymer functionalized carbon nanotubes. It also includes a comprehensive description of carbon nanotubes' preparation, properties, and characterization. Therefore, we have attempted to provide detailed information about the polymer-carbon nanotube composites. With regard to the unique structure and properties of carbon nanotubes, a series of important findings have been reported. The unique properties of carbon nanotubes, including thermal, mechanical, and electrical properties, after polymer functionalization have been documented in detail. This book comprises 18 chapters. The chapters include different applications of polymer functionalization CNTs, e.g. photovoltaic, biomedical, drug delivery, gene delivery, stem cell therapy, thermal therapy, biological detection and imaging, electroanalytical, energy, supercapacitor, and gas sensor applications.
Download or read book Fabrication and Electrical Characterization of Transistors Made from Carbon Nanotubes and Graphene written by Daniel Andrew Nezich and published by . This book was released on 2010 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes and graphene are low-dimensional allotropes of carbon which exhibit novel mechanical and electrical properties. The methods for producing these materials and fabricating electronic devices from them are still under development. This thesis uses the fabrication and electronic analysis of field-effect transistors made from carbon nanotubes and graphene to gain insights into the growth process of these materials, to understand complications of the fabrication process, and to assess the quality of the materials through their electronic properties. The numbers of semoconducting and metallic nanotubes produced by growth using two different catalysts are counted by the process of electrical cutting. Various highcurrent phenomena are observed and explained through use of multi-nanotube and charge leakage models. The high-current annealing method discovered for nanotubes is found to also be useful for improving the quality of graphene devices. The graphene used for device fabrication is produced by thermal chemical vapor deposition on thin film nickel. The large area and weak adhesion of this material leads to the alteration of device designs and fabrication procedures, including substrate exposure and high-temperature annealing. A new nanofluidic device is introduced to study the enhanced lateral wet etching rate of materials in contact with graphene. Two sets of graphene field-effect transistors are analyzed, a first for this type of material. Improved material quality results in improved electrical mobility. Two independent models are derived which relate the thickness of a graphene film to its gate-voltage dependent behaviour, and are justified by experiment. Temperature dependence, quantum capacitance, and multiterminal measurements are discussed.
Download or read book Carbon Nanotube Polymer Composites written by Dimitrios Tasis and published by Royal Society of Chemistry. This book was released on 2015-11-09 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemically-modified carbon nanotubes (CNTs) exhibit a wide range of physical and chemical properties which makes them an attractive starting material for the preparation of super-strong and highly-conductive fibres and films. Much information is available across the primary literature, making it difficult to obtain an overall picture of the state-of-the-art. This volume brings together some of the leading researchers in the field from across the globe to present the potential these materials have, not only in developing and characterising novel materials but also the devices which can be fabricated from them. Topics featured in the book include Raman characterisation, industrial polymer materials, actuators and sensors and polymer reinforcement, with chapters prepared by highly-cited authors from across the globe. A valuable handbook for any academic or industrial laboratory, this book will appeal to newcomers to the field and established researchers alike.
Download or read book Carbon Nanotubes written by Jose Mauricio Marulanda and published by BoD – Books on Demand. This book was released on 2011-08-01 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes (CNTs), discovered in 1991, have been a subject of intensive research for a wide range of applications. In the past decades, although carbon nanotubes have undergone massive research, considering the success of silicon, it has, nonetheless, been difficult to appreciate the potential influence of carbon nanotubes in current technology. The main objective of this book is therefore to give a wide variety of possible applications of carbon nanotubes in many industries related to electron device technology. This should allow the user to better appreciate the potential of these innovating nanometer sized materials. Readers of this book should have a good background on electron devices and semiconductor device physics as this book presents excellent results on possible device applications of carbon nanotubes. This book begins with an analysis on fabrication techniques, followed by a study on current models, and it presents a significant amount of work on different devices and applications available to current technology.
Download or read book Printed Flexible Sensors written by Anindya Nag and published by Springer. This book was released on 2019-03-11 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent advances in the design, fabrication and implementation of flexible printed sensors. It explores a range of materials for developing the electrode and substrate parts of the sensors, on the basis of their electrical and mechanical characteristics. The sensors were processed using laser cutting and 3D printing techniques, and the sensors developed were employed in a number of healthcare, environmental and industrial applications, including: monitoring of physiological movements, respiration, salinity and nitrate measurement, and tactile sensing. The type of sensor selected for each application depended on its dimensions, robustness and sensitivity. The sensors fabricated were also embedded in an IoT-based system, allowing them to be integrated into real-time applications.
Download or read book Nanotechnology in Civil Infrastructure written by Kasthurirangan Gopalakrishnan and published by Springer Science & Business Media. This book was released on 2011-03-31 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology in Civil Infrastructure is a state-of-the art reference source describing the latest developments in nano-engineering and nano-modification of construction materials to improve the bulk properties, development of sustainable, intelligent, and smart concrete materials through the integration of nanotechnology based self-sensing and self-powered materials and cyber infrastructure technologies, review of nanotechnology applications in pavement engineering, development of novel, cost-effective, high-performance and long-lasting concrete products and processes through nanotechnology-based innovative processing of cement and cement paste, and advanced nanoscience modeling, visualization, and measurement systems for characterizing and testing civil infrastructure materials at the nano-scale. Researchers, practitioners, undergraduate and graduate students engaged in nanotechnology related research will find this book very useful.
Download or read book Graphene Carbon Nanotubes and Nanostructures written by James E. Morris and published by CRC Press. This book was released on 2017-07-28 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene, Carbon Nanotubes, and Nanostructures: Techniques and Applications offers a comprehensive review of groundbreaking research in nanofabrication technology and explores myriad applications that this technology has enabled. The book examines the historical evolution and emerging trends of nanofabrication and supplies an analytical understanding of some of the most important underlying nanofabrication technologies, with an emphasis on graphene, carbon nanotubes (CNTs), and nanowires. Featuring contributions by experts from academia and industry around the world, this book presents cutting-edge nanofabrication research in a wide range of areas. Topics include: CNT electrodynamics and signal propagation models Electronic structure calculations of a graphene–hexagonal boron nitride interface to aid the understanding of experimental devices based on these heterostructures How a laser field would modify the electronic structure and transport response of graphene, to generate bandgaps The fabrication of transparent CNT electrodes for organic light-emitting diodes Direct graphene growth on dielectric substrates, and potential applications in electronic and spintronic devices CNTs as a promising candidate for next-generation interconnect conductors CMOS–CNT integration approaches, including the promising localized heating CNT synthesis method CNTs in electrochemical and optical biosensors The synthesis of diamondoids by pulsed laser ablation plasmas generated in supercritical fluids, and possible applications The use of DNA nanostructures in lithography CMOS-compatible silicon nanowire biosensors The use of titanium oxide-B nanowires to detect explosive vapors The properties of protective layers on silver nanoparticles for ink-jet printing Nanostructured thin-film production using microreactors A one-stop reference for professionals, researchers, and graduate students working in nanofabrication, this book will also be useful for investors who want an overview of the current nanofabrication landscape.
Download or read book Organized Networks of Carbon Nanotubes written by K.R.V. Subramanian and published by CRC Press. This book was released on 2020-03-17 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, meshes and networks formed out of multiwalled carbon nanotubes are investigated and analyzed, including their use in niche applications such as electro-optic devices, advanced mechanical, thermal and electrical property enhancement, and gene editing. Different properties of multi-walled carbon nanotubes, including random network formation, ordering the meshes and networks by mechanical agitation and application of an external field, using crystallization and cross-linking induced phase separation in homopolymers-CNT composites are discussed with theoretical analysis. The book is aimed at researchers and graduate students in Electrical Engineering; Materials Science and Engineering; Chemical Engineering and Nanotechnology, Electronic circuit design, manufacturing, and characterization.
Download or read book Aligned Carbon Nanotubes written by Zhifeng Ren and published by Springer Science & Business Media. This book was released on 2012-09-05 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a survey of the physics and fabrication of carbon nanotubes and their applications in optics, electronics, chemistry and biotechnology. It focuses on the structural characterization of various carbon nanotubes, fabrication of vertically or parallel aligned carbon nanotubes on substrates or in composites, physical properties for their alignment, and applications of aligned carbon nanotubes in field emission, optical antennas, light transmission, solar cells, chemical devices, bio-devices, and many others. Major fabrication methods are illustrated in detail, particularly the most widely used PECVD growth technique on which various device integration schemes are based, followed by applications such as electrical interconnects, nanodiodes, optical antennas, and nanocoax solar cells, whereas current limitations and challenges are also be discussed to lay the foundation for future developments.
Download or read book Semiconductor Gas Sensors written by Raivo Jaaniso and published by Woodhead Publishing. This book was released on 2019-09-24 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor Gas Sensors, Second Edition, summarizes recent research on basic principles, new materials and emerging technologies in this essential field. Chapters cover the foundation of the underlying principles and sensing mechanisms of gas sensors, include expanded content on gas sensing characteristics, such as response, sensitivity and cross-sensitivity, present an overview of the nanomaterials utilized for gas sensing, and review the latest applications for semiconductor gas sensors, including environmental monitoring, indoor monitoring, medical applications, CMOS integration and chemical warfare agents. This second edition has been completely updated, thus ensuring it reflects current literature and the latest materials systems and applications. - Includes an overview of key applications, with new chapters on indoor monitoring and medical applications - Reviews developments in gas sensors and sensing methods, including an expanded section on gas sensor theory - Discusses the use of nanomaterials in gas sensing, with new chapters on single-layer graphene sensors, graphene oxide sensors, printed sensors, and much more
Download or read book Electronic Properties of Carbon Nanotubes written by Leroy Sidney and published by . This book was released on 2016-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes (CNTs) are tubular cylinders of carbon atoms that have extraordinary mechanical, electrical, thermal, optical and chemical properties. CNTs typically have diameters ranging from 1 nanometer (nm) up to 50 nma nanometer is one thousand millionth of a meter. Typical CNT lengths are several micronsseveral thousand nanometers long; by contrast, Nanocomp's produced fibers are measured in millimetersthousands of times longer than all other commercially produced CNTs. They take the form of cylindrical carbon molecules and have novel properties that make them potentially useful in a wide variety of applications in nanotechnology, electronics, optics and other fields of materials science. They exhibit extraordinary strength and unique electrical properties, and are efficient conductors of heat. In the powdery format offered by all CNT producers (but for NTI), applications are limited to the properties possible by this form factore.g. additive active ingredients in semiconductors, liquid crystal displays (LCDs), sensors, and other uses in which these powders add some level of functional performance. Due to its fiber length and its form factors, NTI delivers strength and conductivity unlike any other commercial CNT producer, and so can address a much broader array of applications for which its material rivals copper and aluminum in conductivity, and steel, aluminum, carbon fibers and glass composites where strength and lightweight matter. Carbon nanotubes have been a subject of exhaustive research for a wide range of applications. The purpose of this book entitled Properties of Carbon Nanotubes is to give in-depth understanding of the physics and electronic structure of carbon nanotubes. This book discusses fabrication techniques followed by an analysis on the physical properties of carbon nanotubes, including density of states and electronic structures. Eventually, the book follows a significant amount of work in the industry applications of carbon nanotubes.
Download or read book Carbon Nanotube Synthesis Device Fabrication and Circuit Design for Digital Logic Applications written by Albert Lin and published by Stanford University. This book was released on 2010 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotube Field Effect Transistor (CNFET) technology has received a lot of attention in the past few years as a promising extension to silicon-CMOS for future digital logic integrated circuits. While recent research has advanced CNFET technology past many important milestones, robust and scalable solutions must be developed to realize the full potential of CNFETs. Thus, this thesis aims to develop a suite of techniques, spanning from material synthesis to circuit solutions, compatible with very-large-scale integration (VLSI). Specifically, to enable the real-world engineering of carbon nanotube integrated circuits, this thesis presents (1) wafer-scale aligned CNT growth, (2) wafer-scale CNT Transfer, (3) wafer-scale device and circuit fabrication techniques, and (4) ACCNT, a VLSI-compatible circuit design solution to surmounting the problem of metallic CNTs. These techniques culminated in the successful demonstration of CNT transistors, inverters, and NAND logic gates on a wafer scale. Furthermore, this thesis sheds light on important design considerations for the demonstration of a simple CNT "computer" and suggests a few critical directions for future work in the field of carbon nanotube technology. In contributing the above, this thesis hopes to propel carbon nanotube technology forward towards the vision of robust, large-scale integrated circuits using high-density carbon nanotubes.
Download or read book Carbon Nanotubes for Interconnects written by Aida Todri-Sanial and published by Springer. This book was released on 2016-07-09 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a single-source reference on the use of carbon nanotubes (CNTs) as interconnect material for horizontal, on-chip and 3D interconnects. The authors demonstrate the uses of bundles of CNTs, as innovative conducting material to fabricate interconnect through-silicon vias (TSVs), in order to improve the performance, reliability and integration of 3D integrated circuits (ICs). This book will be first to provide a coherent overview of exploiting carbon nanotubes for 3D interconnects covering aspects from processing, modeling, simulation, characterization and applications. Coverage also includes a thorough presentation of the application of CNTs as horizontal on-chip interconnects which can potentially revolutionize the nanoelectronics industry. This book is a must-read for anyone interested in the state-of-the-art on exploiting carbon nanotubes for interconnects for both 2D and 3D integrated circuits.
Download or read book Optimization and Applications written by Yury Evtushenko and published by Springer. This book was released on 2019-01-09 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 9th International Conference on Optimization and Applications, OPTIMA 2018, held in Petrovac, Montenegro, in October 2018.The 35 revised full papers and the one short paper presented were carefully reviewed and selected from 103 submissions. The papers are organized in topical sections on mathematical programming; combinatorial and discrete optimization; optimal control; optimization in economy, finance and social sciences; applications.
Download or read book Carbon Nanotubes as Conductive Filler in Segregated Polymer Composites Electrical Properties written by Yevgen Mamunya and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
