Download or read book Explosive Loading of Engineering Structures written by P.S. Bulson and published by CRC Press. This book was released on 1997-07-24 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the development of research into the explosive loading of structures, mainly since the beginning of the twentieth century. Major contributions in the fields of measurement, analysis and prediction are discussed. Dynamic loading from conventional high explosives is examined, as well as the effects of liquid propellant, dust, gas, v
Download or read book Explosive Loading of Engineering Structures written by P. S. Bulson and published by . This book was released on 1997 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Against Blast written by S. Syngellakis and published by WIT Press. This book was released on 2013 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Terrorist attacks and other destructive incidents caused by explosives have, in recent years, prompted considerable research and development into the protection of structures against blast loads. For this objective to be achieved, experiments have been performed and theoretical studies carried out to improve our assessments of the intensity as well as the space-time distribution of the resulting blast pressure on the one hand and the consequences of an explosion to the exposed environment on the other.This book aims to enhance awareness on and understanding of these topical issues through a collection of relevant, Transactions of the Wessex Institute of Technology articles written by experts in the field. The book starts with an overview of key physics-based algorithms for blast and fragment environment characterisation, structural response analyses and structural assessments with reference to a terrorist attack in an urban environment and the management of its inherent uncertainties.A subsequent group of articles is concerned with the accurate definition of blast pressure, which is an essential prerequisite to the reliable assessment of the consequences of an explosion. Other papers are concerned with alternative methods for the determination of blast pressure, based on experimental measurements or neural networks. A final group of articles reports investigations on predicting the response of specific structural entities and their contents.The book concludes with studies on the effectiveness of steel-reinforced polymer in improving the performance of reinforced concrete columns and the failure mechanisms of seamless steel pipes used in nuclear industry.
Download or read book Blast and Ballistic Loading of Structures written by John Hetherington and published by CRC Press. This book was released on 2014-04-21 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together, in a concise format, the key elements of the loads produced from explosive sources, and how they interact with structures. Explosive sources include gas, high explosives, dust and nuclear materials.It presents quantitative information and design methods in a useable form without recourse to extensive mathematical ana
Download or read book Blast Effects on Buildings written by David Cormie and published by Thomas Telford Publishing. This book was released on 2009 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflects developments in the field of blast engineering since the early 1990s. Combining coverage of the design standards, codes and materials with an appreciation of the needs and demands of the designer, this book provides the engineer with a comprehensive source of reference for the main elements of blast engineering design in modern practice.
Download or read book Blast Effects on Buildings written by Geoffrey Mays and published by Thomas Telford. This book was released on 1995 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide is aimed at all engineers and architects involved in building design, focusing on the importance of constructing buildings which minimise damage to people and property in the event of an explosion.
Download or read book Explosion Resistant Buildings written by M. Y. H. Bangash and published by Springer Science & Business Media. This book was released on 2005-12-16 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: This excellent book highlights all aspects of the analysis and design of buildings subject to impact, explosion and fire. It is a definitive reference book and contains 10 chapters from a wide international prospective. Three-dimensional finite element and discrete element techniques are included. They are applied to buildings such as the World Trade Center (WTC Twin Towers) and the Federal Building in Oklahoma on the basis of the designers drawings, data and other information. Many small case studies are also included. The book has a comprehensive bibliography and a large appendix providing background analysis and computer subroutines of recently developed programs.
Download or read book Explosive Shocks in Air written by Gilbert F. Kinney and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: A purpose of science is to organize diversified factual knowledge into a coherent body of information, and to present this from the simplest possible viewpoint. This is a formidable task where our knowledge is incomplete, as it is with explosions. Here one runs the risk of oversimplification, naivete, and incom pleteness. Nevertheless a purpose of this work is to present as simply as possible a general description of the basic nature of explosions. This treatise should be of interest to all who are working with explosives such as used in construction or in demolition work, in mining operations, or in military applications. It should also be of interest to those concemed with disasters such as explosions or earthquakes, to those involved in civil defense precautions, and to those concemed with defense against terrorists. That is, this material should be of interest to all who wish to utilize, or to avoid, the effects of explosions as weil as to those whose interest is primarily scientific in nature.
Download or read book Advances in Frontier Research on Engineering Structures Volume 1 written by Yang Yang and published by CRC Press. This book was released on 2023-02-08 with total page 747 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Frontier Research on Engineering Structures focuses on the research of advanced structures and anti-seismic design in civil engineering. The proceedings present the most cutting-edge research directions and achievements related to civil and structural engineering. Topics covered in the proceedings include: · Engineering Structure and Seismic Resistance · Structural Mechanics Analysis · Components and Materials · Structural Seismic Design · 3D Printing Concrete · Other Related Topics The works of this proceedings will promote development of civil and structural engineering, resource sharing, flexibility and high efficiency. Thereby, promote scientific information interchange between scholars from the top universities, research centers and high-tech enterprises working all around the world.
Download or read book Response of Structures Under Extreme Loading written by Venkatesh K.R. Kodur and published by DEStech Publications, Inc. This book was released on 2015-07-01 with total page 1014 pages. Available in PDF, EPUB and Kindle. Book excerpt: Original research on performance of materials under a wide variety of blasts, impacts, severe loading and fireCritical information for protecting buildings and civil infrastructure against human attack, deterioration and natural disastersTest and design data for new types of concrete, steel and FRP materials This technical book is devoted to the empirical and theoretical analysis of how structures and the materials constituting them perform under the extreme conditions of explosions, fire, and impact. Each of the 119 fully refereed presentations is published here for the first time and was selected because of its original contribution to the science and engineering of how materials, bridges, buildings, tunnels and their components, such as beams and pre-stressed parts, respond to potentially destructive forces. Emphasis is placed on translating empirical data to design recommendations for strengthening structures, including strategies for fire and earthquake protection as well as blast mitigation. Technical details are provided on the development and behavior of new resistant materials, including reinforcements, especially for concrete, steel and their composites.
Download or read book Handbook for Blast Resistant Design of Buildings written by Donald O. Dusenberry and published by John Wiley & Sons. This book was released on 2010-01-26 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unique single reference supports functional and cost-efficient designs of blast resistant buildings Now there's a single reference to which architects, designers, and engineers can turn for guidance on all the key elements of the design of blast resistant buildings that satisfy the new ASCE Standard for Blast Protection of Buildings as well as other ASCE, ACI, and AISC codes. The Handbook for Blast Resistant Design of Buildings features contributions from some of the most knowledgeable and experienced consultants and researchers in blast resistant design. This handbook is organized into four parts: Part 1, Design Considerations, sets forth basic principles, examining general considerations in the design process; risk analysis and reduction; criteria for acceptable performance; materials performance under the extraordinary blast environment; and performance verification for technologies and solution methodologies. Part 2, Blast Phenomena and Loading, describes the explosion environment, loading functions needed for blast response analysis, and fragmentation and associated methods for effects analysis. Part 3, System Analysis and Design, explains the analysis and design considerations for structural, building envelope, component space, site perimeter, and building system designs. Part 4, Blast Resistant Detailing, addresses the use of concrete, steel, and masonry in new designs as well as retrofitting existing structures. As the demand for blast resistant buildings continues to grow, readers can turn to the Handbook for Blast Resistant Design of Buildings, a unique single source of information, to support competent, functional, and cost-efficient designs.
Download or read book Advances in Protective Structures Research written by Hong Hao and published by CRC Press. This book was released on 2012-08-17 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Association of Protective Structures (IAPS) was launched on 1 October 2010 in Manchester, UK during the first International Conference of Protective Structures. The primary purpose of IAPS is to bring researchers and engineers working in the area of protective structures together, and to promote research and development work for b
Download or read book Maritime Technology and Engineering 5 Volume 1 written by Carlos Guedes Soares and published by CRC Press. This book was released on 2021-07-08 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt: This set of two volumes comprises the collection of the papers presented at the 5th International Conference on Maritime Technology and Engineering (MARTECH 2020) that was held in Lisbon, Portugal, from 16 to 19 November 2020. The Conference has evolved from the series of biennial national conferences in Portugal, which have become an international event, and which reflect the internationalization of the maritime sector and its activities. MARTECH 2020 is the fifth of this new series of biennial conferences. The set comprises 180 contributions that were reviewed by an International Scientific Committee. Volume 1 is dedicated to maritime transportation, ports and maritime traffic, as well as maritime safety and reliability. It further comprises sections dedicated to ship design, cruise ship design, and to the structural aspects of ship design, such as ultimate strength and composites, subsea structures as pipelines, and to ship building and ship repair.
Download or read book Loading Structures UM Press written by Hassanali Mosalman Yazdi and published by The University of Malaya Press. This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Loading structures is one of the most significant stages in structural design procedures. Consideration of various loads which may be subjected to a structure during its lifetime is very important. Hence, it needs a special consideration for training students and designers. Students learn very briefly about the loading and distribution of loads in different courses. However, this subject is so important and it needs special attention to make students familiar with the loading rules as well as usage of their related building codes in one book or in one subject. Regarding the necessity of understanding this subject for the students and designers, I decided to write this book to introduce the basics and principles in considering different loads and their distribution methods on the structural elements. Thereby, this book is prepared in 6 chapters including Dead and live load and their distribution, Wind load, Seismic load, Soil load, Hydrostatic load and Crane load. One of the noticeable parts of this book is chapter two which focuses on the wind load based on the Malaysian standard code.
Download or read book Blast Protection of Buildings written by American Society of Civil Engineers and published by . This book was released on 2023-03-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Standard ASCE/SEI 59-22 provides minimum requirements for planning, design, construction, and assessment of new and existing buildings subject to the effects of accidental or malicious explosions.
Download or read book Structures to Resist the Effects of Accidental Explosions written by and published by . This book was released on 1991 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Explosion Hazards and Evaluation written by W.E. Baker and published by Elsevier. This book was released on 2012-12-02 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explosion Hazards and Evaluation presents the principles and applications of explosion hazards evaluation. The text is organized into nine chapters. Chapters 1 and 2 discuss the energy release processes which generate accidental explosions, and the resulting development of pressure and shock waves in a surrounding atmosphere. The manner in which the "free-field" waves are modified in interacting with structures or other objects in their paths is discussed in Chapter 3. Structural response to blast loading and non-penetrating impact is covered in two chapters, with Chapter 4 including simplified analysis methods and Chapter 5 including numerical methods. Chapter 6 includes a rather comprehensive treatment of generation of fragments and missiles in explosions, and the flight and effects of impact of these objects. Chapter 7 considers thermal radiation of large chemical explosions. Explosions may or may not cause damage or casualty, and various damage criteria have been developed for structures, vehicles, and people. These criteria are presented in Chapter 8. General procedures for both the postmortem evaluation of accidental explosions and for design for blast and impact resistance are reviewed in Chapter 9. Engineers, scientists, and plant safety personnel will find the book very useful.
