Download or read book Behaviour of Granular Materials written by Bernard Cambou and published by Springer. This book was released on 2014-05-04 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a complete and comprehensive analysis of the behaviour of granular materials including the description of experimental results, the different ways to define the global behaviour from local phenomena at the particle scale, the various modellings which can be used for a D.E.M. analysis to solve practical problems and finally the analysis of strain localisation. The concepts developed in this book are applicable to many kinds of granular materials considered in civil, mechanical or chemical engineering.
Download or read book Particulate Discrete Element Modelling written by Catherine O'Sullivan and published by CRC Press. This book was released on 2011-04-06 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first single work on DEM providing the information to get started with this powerful numerical modelling approach. Provides the basic details of the numerical method and the approaches used to interpret the results of DEM simulations. It will be of use to professionals, researchers and higher level students, with a theoretical overview of DEM as well as practical guidance.Selected Contents: 1.Introduction 2.Use of DEM in Geomechanics 3.Calculation of Contact Forces 4.Particle Motion 5.Particle Types 6.Boundary Conditions 7.Initial Geometry and Specimen Generation 8.Time Integration and Discrete Element Modelling 9.DEM Interpretation: A Continuum Perspective 10.Postprocessing: Graphical Interpretation of DEM Simulations 11.Basic Statisti
Download or read book Proceedings of the 7th International Conference on Discrete Element Methods written by Xikui Li and published by Springer. This book was released on 2016-12-01 with total page 1414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest advances in Discrete Element Methods (DEM) and technology. It is the proceeding of 7th International Conference on DEM which was held at Dalian University of Technology on August 1 - 4, 2016. The subject of this book are the DEM and related computational techniques such as DDA, FEM/DEM, molecular dynamics, SPH, Meshless methods, etc., which are the main computational methods for modeling discontinua. In comparison to continua which have been already studied for a long time, the research of discontinua is relatively new, but increases dramatically in recent years and has already become an important field. This book will benefit researchers and scientists from the academic fields of physics, engineering and applied mathematics, as well as from industry and national laboratories who are interested in the DEM.
Download or read book Proceedings of GeoShanghai 2018 International Conference Fundamentals of Soil Behaviours written by Annan Zhou and published by Springer. This book was released on 2018-05-10 with total page 1026 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the second volume of the proceedings of the 4th GeoShanghai International Conference that was held on May 27 - 30, 2018. The book, entitled “Fundamentals of Soil Behaviours”, presents the recent advances and technology in the understanding and modelling of fundamentals of soil’s behaviours. The subject of this book covers a wide range of topics related to soil behaviours in geotechnical engineering, geoenvironmental engineering and transportation engineering. The state-of-the-art theories, methodologies and findings in the related topics are included. This book may benefit researchers and scientists from the academic fields of soil and rock mechanics, geotechnical engineering, geoenvironmental engineering, transportation engineering, geology, mining and energy, as well as practical engineers from industry. Each of the papers included in this book received at least two positive peer reviews. The editors would like to express their sincerest appreciation to all of the anonymous reviewers all over the world, for their diligent work.
Download or read book Mechanics of Granular Materials An Introduction written by K. Iwashita and published by CRC Press. This book was released on 2020-08-13 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook compiles reports written by about 35 internationally recognized authorities, and covers a range of interests for geotechnical engineers. Topics include: fundamentals for mechanics of granular materials; continuum theory of granular materials; and discrete element approaches.
Download or read book Granular and Complex Materials written by Tomaso Aste and published by World Scientific. This book was released on 2007 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: The science of complex materials continues to engage researchers from a vast range of disciplines, including physics, mathematics, computational science, and virtually all domains of engineering.This volume presents a unique multidisciplinary panorama of the current research in complex materials. The contributions explore an array of problems reflecting recent developments in four main areas: characterization and modeling of disordered packings, micromechanics and continuum theory; discrete element method; statistical mechanics. The common theme is the quest to unravel the connection between the microscopic and macroscopic properties of complex materials.
Download or read book Geomechanics from Micro to Macro written by Kenichi Soga and published by CRC Press. This book was released on 2014-08-26 with total page 1668 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geomechanics from Micro to Macro contains 268 papers presented at the International Symposium on Geomechanics from Micro and Macro (IS-Cambridge, UK, 1-3 September 2014). The symposium created a forum for the dissemination of new advances in the micro-macro relations of geomaterial behaviour and its modelling. The papers on experimental investigati
Download or read book The Automated Design of Materials Far From Equilibrium written by Marc Z. Miskin and published by Springer. This book was released on 2015-11-13 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis conceptualizes and implements a new framework for designing materials that are far from equilibrium. Starting with state-of-the-art optimization engines, it describes an automated system that makes use of simulations and 3D printing to find the material that best performs a user-specified goal. Identifying which microscopic features produce a desired macroscopic behavior is a problem at the forefront of materials science. This task is materials design, and within it, new goals and challenges have emerged from tailoring the response of materials far from equilibrium. These materials hold promising properties such as robustness, high strength, and self-healing. Yet without a general theory to predict how these properties emerge, designing and controlling them presents a complex and important problem. As proof of concept, the thesis shows how to design the behavior of granular materials, i.e., collections of athermal, macroscopic identical objects, by identifying the particle shapes that form the stiffest, softest, densest, loosest, most dissipative and strain-stiffening aggregates. More generally, the thesis shows how these results serve as prototypes for problems at the heart of materials design, and advocates the perspective that machines are the key to turning complex material forms into new material functions.
Download or read book Advances in X ray Tomography for Geomaterials written by Jacques Desrues and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together a total of 48 contributions (including 5 keynote papers) which were presented at the 2nd International Workshop on the Application of X-ray CT for Geomaterials (GeoX 2006) held in Aussois, France, on 4-7 October, 2006. The contributions cover a wide range of topics, from fundamental characterization of material behavior to applications in geotechnical and geoenvironmental engineering. Recent advances of X-ray technology, hardware and software are also discussed. As such, this will be valuable reading for anyone interested in the application of X-ray CT to geomaterials from both fundamental and applied perspectives.
Download or read book Correlations of Soil and Rock Properties in Geotechnical Engineering written by Jay Ameratunga and published by Springer. This book was released on 2015-12-11 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a one-stop reference to the empirical correlations used extensively in geotechnical engineering. Empirical correlations play a key role in geotechnical engineering designs and analysis. Laboratory and in situ testing of soils can add significant cost to a civil engineering project. By using appropriate empirical correlations, it is possible to derive many design parameters, thus limiting our reliance on these soil tests. The authors have decades of experience in geotechnical engineering, as professional engineers or researchers. The objective of this book is to present a critical evaluation of a wide range of empirical correlations reported in the literature, along with typical values of soil parameters, in the light of their experience and knowledge. This book will be a one-stop-shop for the practising professionals, geotechnical researchers and academics looking for specific correlations for estimating certain geotechnical parameters. The empirical correlations in the forms of equations and charts and typical values are collated from extensive literature review, and from the authors' database.
Download or read book Microgravity Research in Support of Technologies for the Human Exploration and Development of Space and Planetary Bodies written by National Research Council and published by National Academies Press. This book was released on 2000-08-03 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: The frontier represented by the near solar system confronts humanity with intriguing challenges and opportunities. With the inception of the Human Exploration and Development of Space (HEDS) enterprise in 1995, NASA has acknowledged the opportunities and has accepted the very significant challenges. Microgravity Research in Support of Technologies for the Human Exploration and Development of Space and Planetary Bodies was commissioned by NASA to assist it in coordinating the scientific information relevant to anticipating, identifying, and solving the technical problems that must be addressed throughout the HEDS program over the coming decades. This report assesses scientific and related technological issues facing NASA's Human Exploration and Development of Space endeavor, looking specifically at mission enabling and enhancing technologies which, for development, require an improved understanding of fluid and material behavior in a reduced gravity environment.
Download or read book Mechanical Behaviour of Materials written by Dominique François and published by Springer Science & Business Media. This book was released on 2012-03-06 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in technology are demanding ever-increasing mastery over the materials being used: the challenge is to gain a better understanding of their behaviour, and more particularly of the relations between their microstructure and their macroscopic properties. This work, of which this is the first volume, aims to provide the means by which this challenge may be met. Starting from the mechanics of deformation, it develops the laws governing macroscopic behaviour – expressed as the constitutive equations – always taking account of the physical phenomena which underlie rheological behaviour. The most recent developments are presented, in particular those concerning heterogeneous materials such as metallic alloys, polymers and composites. Each chapter is devoted to one of the major classes of material behaviour. As the subtitles indicate, Volume 1 deals with micro- and macroscopic constitutive behaviour and Volume 2 with damage and fracture mechanics. A third volume will be devoted to exercises and their full solutions complementing the content of these two first volumes. Most of the chapters end with a set of exercises, to many of which either the full solution or hints on how to obtain this are given; each volume is profusely illustrated with explanatory diagrams and with electron-microscope photographs. This book, now in its second edition, has been rigorously re-written, updated and modernised for a new generation. The authors improved the existing material, in particular in modifying the organisation, and added new up-to-date content. Understanding the subject matter requires a good knowledge of solid mechanics and materials science; the main elements of these fields are given in a set of annexes at the end of the first volume. The authors also thought it interesting for the readers to give as footnotes some information about the many scientists whose names are attached to theories and formulae and whose memories must be celebrated. Whilst the present book, as well as Volume 2, is addressed primarily to graduate students, part of it can be used in undergraduate courses; and it is hoped that practising engineers and scientists will find the information it conveys useful. It is the authors’ hope also that English-speaking readers will want to learn about the aspects of French culture, and more particularly of the French school of micromechanics of materials, which this treatment undoubtedly displays.
Download or read book Geotechnical Modelling written by David Muir Wood and published by CRC Press. This book was released on 2017-12-21 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling forms an implicit part of all engineering design but many engineers engage in modelling without consciously considering the nature, validity and consequences of the supporting assumptions. Derived from courses given to postgraduate and final year undergraduate MEng students, this book presents some of the models that form a part of the typical undergraduate geotechnical curriculum and describes some of the aspects of soil behaviour which contribute to the challenge of geotechnical modelling. Assuming a familiarity with basic soil mechanics and traditional methods of geotechnical design, this book is a valuable tool for students of geotechnical and structural and civil engineering as well as also being useful to practising engineers involved in the specification of numerical or physical geotechnical modelling.
Download or read book Mechanical Behavior of Materials written by William F. Hosford and published by Cambridge University Press. This book was released on 2010 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a textbook on the mechanical behavior of materials for mechanical and materials engineering. It emphasizes quantitative problem solving. This new edition includes treatment of the effects of texture on properties and microstructure in Chapter 7, a new chapter (12) on discontinuous and inhomogeneous deformation, and treatment of foams in Chapter 21.
Download or read book Physico mechanical properties and treatment technology of hazardous geomaterials written by Bing Bai and published by Frontiers Media SA. This book was released on 2023-04-14 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Unbound Granular Materials written by A. Gomes Correia and published by . This book was released on 1999 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Granular Dynamics Contact Mechanics and Particle System Simulations written by Colin Thornton and published by Springer. This book was released on 2015-09-03 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to the Discrete Element Method (DEM) technique, a discontinuum modelling approach that takes into account the fact that granular materials are composed of discrete particles which interact with each other at the microscale level. This numerical simulation technique can be used both for dispersed systems in which the particle-particle interactions are collisional and compact systems of particles with multiple enduring contacts. The book provides an extensive and detailed explanation of the theoretical background of DEM. Contact mechanics theories for elastic, elastic-plastic, adhesive elastic and adhesive elastic-plastic particle-particle interactions are presented. Other contact force models are also discussed, including corrections to some of these models as described in the literature, and important areas of further research are identified. A key issue in DEM simulations is whether or not a code can reliably simulate the simplest of systems, namely the single particle oblique impact with a wall. This is discussed using the output obtained from the contact force models described earlier, which are compared for elastic and inelastic collisions. In addition, further insight is provided for the impact of adhesive particles. The author then moves on to provide the results of selected DEM applications to agglomerate impacts, fluidised beds and quasi-static deformation, demonstrating that the DEM technique can be used (i) to mimic experiments, (ii) explore parameter sweeps, including limiting values, or (iii) identify new, previously unknown, phenomena at the microscale. In the DEM applications the emphasis is on discovering new information that enhances our rational understanding of particle systems, which may be more significant than developing a new continuum model that encompasses all microstructural aspects, which would most likely prove too complicated for practical implementation. The book will be of interest to academic and industrial researchers working in particle technology/process engineering and geomechanics, both experimentalists and theoreticians.
