Download or read book Exploring Fiber reinforced Polymer Concrete for Accelerated Bridge Construction Applications written by Carolyn Donohoe and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of prefabricated superstructure elements in bridge construction reduces on-site construction time, improves work-zone safety, and can reduce overall project costs. For prefabricated elements to be used efficiently for accelerated bridge construction (ABC), the precast components, such as deck panels or decked-bulb tees, must be connected quickly on-site, ideally using as little additional material as possible. The use of fiber-reinforced polymer concrete (FRPC) was explored as a closure pour material for bridges to connect adjacent precast superstructure elements. Polymer concretes have been used successfully as a non-structural overlay material in transportation systems for many decades. With the addition of fibers, FRPC displays levels of two critical characteristics, bond and tension strength, that are comparable to other alternatives, such as ultra-high performance concrete (UHPC). While UHPC may still provide the best solution in many instances, FRPC has the advantage of requiring shorter closure windows (approximately 4 hours versus 72 hours for UHPC) due to the very rapid strength gain of the polymer, which could be ideal for overnight construction or rehabilitation projects. The bond and mechanical properties of FRPC were determined at several temperatures, spanning the range of typical service conditions in western Washington State. Tests were completed measuring the compressive, flexural, and bond strength of FRPC. Then, a central composite rotatable experimental design was utilized to explore the impact of splice length, side cover, bar size, and temperature on bar stress in non-contact splice specimens. The test setup was similar to that completed by the Federal Highway Administration (FHWA) with UHPC. The results of the testing program indicate that FRPC exhibits significant variation in mechanical properties with temperature, roughly -0.6 %/°F; the development of early compressive, flexure, and bond strengths were very similar, reaching roughly 70% of their 7-day values in 4 hours; and peak bar stresses in non-contact lap splices embedded in FRPC were comparable to UHPC for the embedded lengths tested. Based on the testing results, example joint configurations for connecting precast superstructure elements were developed, enabling the comparison of FRPC with alternative closure pour materials for future ABC projects.
Download or read book Application of Fiber Reinforced Polymer Composites to the Highway Infrastructure written by Dennis R. Mertz and published by Transportation Research Board. This book was released on 2003 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rising awareness of and increased attention to sexual harassment has resulted in momentum to implement sexual harassment prevention efforts in higher education institutions. Work on preventing sexual harassment is an area that has recently garnered a lot of attention, especially around education and programs that go beyond the standard anti-sexual harassment trainings often used to comply with legal requirements. On April 20-21, 2021, the National Academies of Sciences, Engineering, and Medicine hosted the workshop Developing Evaluation Metrics for Sexual Harassment Prevention Efforts. The workshop explored approaches and strategies for evaluating and measuring the effectiveness of sexual harassment interventions being implemented at higher education institutions and research and training sites, in order to assist institutions in transforming promising ideas into evidence-based best practices. Workshop participants also addressed methods, metrics, and measures that could be used to evaluate sexual harassment prevention efforts that lead to change in the organizational climate and culture and/or a change in behavior among community members. This publication summarizes the presentations and discussion of the workshop.
Download or read book Accelerated Bridge Construction written by Mohiuddin Ali Khan and published by Elsevier. This book was released on 2014-08-12 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt: The traveling public has no patience for prolonged, high cost construction projects. This puts highway construction contractors under intense pressure to minimize traffic disruptions and construction cost. Actively promoted by the Federal Highway Administration, there are hundreds of accelerated bridge construction (ABC) construction programs in the United States, Europe and Japan. Accelerated Bridge Construction: Best Practices and Techniques provides a wide range of construction techniques, processes and technologies designed to maximize bridge construction or reconstruction operations while minimizing project delays and community disruption. Describes design methods for accelerated bridge substructure construction; reducing foundation construction time and methods by using pile bents Explains applications to steel bridges, temporary bridges in place of detours using quick erection and demolition Covers design-build systems' boon to ABC; development of software; use of fiber reinforced polymer (FRP) Includes applications to glulam and sawn lumber bridges, precast concrete bridges, precast joints details; use of lightweight aggregate concrete, aluminum and high-performance steel
Download or read book Use of Fibre Reinforced Polymers in Bridge Construction written by Thomas Keller and published by Iabse. This book was released on 2003 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reviews the progress made worldwide in the use of fibre reinforced polymers as structural components in bridges until the end of the year 2000. Due to their advantageous material properties such as high specific strength, a large tolerance for frost and de-icing salts and, furthermore, short installation times with minimum traffic interference, fibre reinforced polymers have matured to become valuable alternative building materials for bridge structures. Today, fibre reinforced polymers are manufactured industrially to semi-finished products and complete structural components, which can be easily and quickly installed or erected on site.
Download or read book Developments in fiber reinforced polymer FRP composites for civil engineering written by Y. Kitane and published by Elsevier Inc. Chapters. This book was released on 2013-05-15 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: This chapter first reviews current structural applications of fiber-reinforced polymer (FRP) composites in bridge structures, and describes advantages of FRP in bridge applications. This chapter then introduces the design of a hybrid FRP-concrete bridge superstructure, which has been developed at The University at Buffalo for the past ten years, and discusses structural performance of the superstructure based on extensive experimental and analytical studies.
Download or read book Developments in fiber reinforced polymer FRP composites for civil engineering written by N. Uddin and published by Elsevier Inc. Chapters. This book was released on 2013-05-15 with total page 43 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: The primary objective of this chapter is first to introduce and demonstrate the application of thermoplastic (woven glass reinforced polypropylene) in the design of modular fiber-reinforced bridge decks, and next the development of jackets for confining concrete columns against compression and impact loading. The design concept and manufacturing processes of the thermoplastic bridge deck composite structural system are presented by recognizing the structural demands required to support highway traffic. Then the results of the small-scale static cylinder tests and the impact tests of concrete columns are presented, demonstrating that thermoplastic reinforcement jackets act to restrain the lateral expansion of the concrete that accompanies the onset of crushing, maintaining the integrity of the core concrete, and enabling much higher compression strains (compared to CFRP composite wraps) to be sustained by the compression zone before failure occurs.
Download or read book Fiber Reinforced Polymer FRP Composites for Infrastructure Applications written by Ravi Jain and published by Springer Science & Business Media. This book was released on 2012-01-02 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines current issues of fiber reinforced polymer (FRP) composites in civil infrastructure. The contents of this book are divided into two parts. The first part engages topics related to durability and service life of FRP composites and how they contribute to sustainability. The second part highlights implementation and applications of the FRP composites with an emphasis on bridge structures. An introductory chapter provides an overview of FRP composites and its role in a sustainable built environment highlighting the issues of durability and service life followed by a current review of sustainability in infrastructure design.
Download or read book Advanced fibre reinforced polymer FRP composites for structural applications written by L.C. Hollaway and published by Elsevier Inc. Chapters. This book was released on 2013-09-30 with total page 51 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chapters 16 and discuss the development of the advanced polymer composite material applications in bridge engineering. They demonstrate the innovative types of components and structures which have been developed from FRP composite materials and the most advantageous way to employ composites in bridge engineering. Given the importance of bridge infrastructure, the discussion of this topic has been split over two chapters. This chapter focuses on the type of FRP composite materials used in bridge engineering, their in-service properties and their applications in bridge enclosures and the rehabilitation of reinforced and prestressed concrete bridge beams and columns. covers rehabilitation of metallic bridge structures, all FRP composite bridges and bridges built with hybrid systems.
Download or read book Recommended Guide Specification for the Design of Externally Bonded FRP Systems for Repair and Strengthening of Concrete Bridge Elements written by Abdul-Hamid Zureick and published by Transportation Research Board. This book was released on 2009 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Report 655: Recommended Guide Specification for the Design of Externally Bonded FRP Systems for Repair and Strengthening of Concrete Bridge Elements examines a recommended guide specification for the design of externally bonded Fiber-Reinforced Polymer (FRP) systems for the repair and strengthening of concrete bridge elements. The report addresses the design requirements for members subjected to different loading conditions including flexure, shear and torsion, and combined axial force and flexure. The recommended guide specification is supplemented by design examples to illustrate its use for different FRP strengthening applications.
Download or read book ADVANTAGES AND DISADVANTAGES OF FIBER REINFORCED CONCRETE written by S.R.R. TEJA. PRATHIPATI and published by . This book was released on 2024 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reinforced Concrete Design with FRP Composites written by Hota V.S. GangaRao and published by CRC Press. This book was released on 2006-11-20 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the use of composites has increased in many industrial, commercial, medical, and defense applications, there is a lack of technical literature that examines composites in conjunction with concrete construction. Fulfilling the need for a comprehensive, explicit guide, Reinforced Concrete Design with FRP Composites presents specific informat
Download or read book Available Accelerated Bridge Construction Options for Short Span Bridges written by Armin Mehrabi and published by Cambridge Scholars Publishing. This book was released on 2024-03-18 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: By employing prefabricated bridge elements and systems, Accelerated Bridge Construction reduces on-site construction time and traffic disruptions, and enhances long-term performance. ABC is particularly advantageous for short-span bridges that are well-suited to standardized prefabrication. In such cases, the entire superstructure and substructure can often be constructed using prefabricated deck elements, modular decks, or systems that span the full bridge width. The construction methods can range from traditional crane installations to Self-Propelled Modular Transport units or slide-in techniques for moving the entire superstructures. This book introduces the concept of ABC and examines its application in the context of short-span bridge construction. It categorizes and details short-span bridges based on various criteria and evaluates the performance of the existing bridges. Decision-making processes regarding the adoption of ABC, choice of elements, systems, and construction methods are also discussed. Additionally, the book covers the inspection of short-span bridges and includes a design example.
Download or read book Strengthening of Concrete Structures Using Fiber Reinforced Polymers FRP written by Hwai-Chung Wu and published by Woodhead Publishing. This book was released on 2017-02-21 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Strengthening of Concrete Structures Using Fiber Reinforced Polymers (FRP): Design, Construction and Practical Applications presents a best practice guide on the structural design and strengthening of bridge structures using advanced Fiber Reinforced Polymer (FRP) composites. The book briefly covers the basic concepts of FRP materials and composite mechanics, while focusing on practical design and construction issues, including inspection and quality control, paying special attention to the differences in various design codes (US, Japan, and Europe) and recommendations. At present, several design guides from the US, Japan, and Europe are available. These guidelines are often inconsistent and do not cover all necessary design and inspection issues to the same degree of detail. This book provides a critical review and comparison of these guidelines, and then puts forward best practice recommendations, filling a significant gap in the literature, and serving as an important resource for engineers, architects, academics, and students interested in FRP materials and their structural applications. Written from a practitioner's point-of-view, it is a valuable design book for structural engineers all over the world. Includes a large quantity of design examples and structural software to facilitate learning and help readers perform routine design Provides recommendations for best practices in design and construction for the strengthening of bridge structures using advanced fiber-reinforced polymer (FRP) composites Presents comprehensive guidelines on design, inspection, and quality control, including laboratory and field testing information
Download or read book Use of Fibre Reinforced Polymers in Bridge Construction written by and published by . This book was released on 2001 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Application of Accelerated Bridge Construction Connections in Moderate to High Seismic Regions written by and published by Transportation Research Board. This book was released on 2011 with total page 65 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB’s National Cooperative Highway Research Program (NCHRP) Report 698: Application of Accelerated Bridge Construction Connections in Moderate-to-High Seismic Regions evaluates the performance of connection details for bridge members in accelerated bridge construction in medium-to-high seismic regions and offers suggestions for further research.
Download or read book Advanced fibre reinforced polymer FRP composites for structural applications written by M.F.M. Fahmy and published by Elsevier Inc. Chapters. This book was released on 2013-09-30 with total page 39 pages. Available in PDF, EPUB and Kindle. Book excerpt: To ensure better performance for a range of existing reinforced concrete structures in seismic regions with substandard structural details, seismic retrofit is an economical solution. Hence, this chapter presents some of the available results in which fiber-reinforced polymer (FRP) composites can be used for damage-controllable structures. For example, the performance of existing reinforced concrete structures whose components are vulnerable to shear failure, flexural-compression failure, joint reinforcement bond failure, or longitudinal reinforcement lap splice failure and retrofitted with FRPs is described. Novel concepts of modern constructions with controllability and recoverability using FRP composites are addressed.
Download or read book Bonded Repair and Retrofit of Concrete Structures Using FRP Composites written by Amir Mirmiran and published by Transportation Research Board. This book was released on 2004 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: The global response to COVID-19 has demonstrated the importance of vigilance and preparedness for infectious diseases, particularly influenza. There is a need for more effective influenza vaccines and modern manufacturing technologies that are adaptable and scalable to meet demand during a pandemic. The rapid development of COVID-19 vaccines has demonstrated what is possible with extensive data sharing, researchers who have the necessary resources and novel technologies to conduct and apply their research, rolling review by regulators, and public-private partnerships. As demonstrated throughout the response to COVID-19, the process of research and development of novel vaccines can be significantly optimized when stakeholders are provided with the resources and technologies needed to support their response. Vaccine Research and Development to Advance Pandemic and Seasonal Influenza Preparedness and Response focuses on how to leverage the knowledge gained from the COVID-19 pandemic to optimize vaccine research and development (R&D) to support the prevention and control of seasonal and pandemic influenza. The committee's findings address four dimensions of vaccine R&D: (1) basic and translational science, (2) clinical science, (3) manufacturing science, and (4) regulatory science.
