Download or read book Numerical Methods for Two phase Incompressible Flows written by Sven Gross and published by Springer Science & Business Media. This book was released on 2011-04-26 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first monograph providing an introduction to and an overview of numerical methods for the simulation of two-phase incompressible flows. The Navier-Stokes equations describing the fluid dynamics are examined in combination with models for mass and surfactant transport. The book pursues a comprehensive approach: important modeling issues are treated, appropriate weak formulations are derived, level set and finite element discretization techniques are analyzed, efficient iterative solvers are investigated, implementational aspects are considered and the results of numerical experiments are presented. The book is aimed at M Sc and PhD students and other researchers in the fields of Numerical Analysis and Computational Engineering Science interested in the numerical treatment of two-phase incompressible flows.
Download or read book Thermohydraulics of Two phase Systems for Industrial Design and Nuclear Engineering written by J. M. Delhaye and published by Hemisphere Pub. This book was released on 1981 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Two Phase Flow in Complex Systems written by Salomon Levy and published by John Wiley & Sons. This book was released on 1999-08-02 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mehrphasige Strömungen spielen in etlichen Industriezweigen, besonders der Luft- und Raumfahrt und der Energieerzeugung, eine zentrale Rolle. Derart komplexe Strömungsvorgänge sind extrem schwer vorauszuberechnen, zu analysieren und zu testen. Wertvolle Hilfestellungen, die für reale technische Situationen gedacht sind, gibt dieser Band, der auch Quelltexte einschlägiger Computerprogramme enthält. (07/99)
Download or read book Two Phase Flows in Chemical Engineering written by David Azbel and published by Cambridge University Press. This book was released on 1981-08-31 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: The behaviour of bubbles is a unifying theme of this book. From an explanation of the fundamentals of bubbles formation at a single orifice, Dr Azbel goes on to set up equations for bubble motion, bubble size, bubble-size distribution and pressure drop across a perforated plate.
Download or read book Computational Experimental Methods in Multiphase Complex Flow X written by S. Hernández and published by WIT Press. This book was released on 2019-07-23 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composed of papers presented at the 10th conference on Multiphase flow this book presents the latest research on the subject. The research included in this volume focuses on using synergies between experimental and computational techniques to gain a better understanding of all classes of multiphase and complex flow.
Download or read book Handbook of Single Phase Convective Heat Transfer written by Sadik Kakaç and published by Wiley-Interscience. This book was released on 1987-11-03 with total page 1268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very Good,No Highlights or Markup,all pages are intact.
Download or read book Transport Phenomena in Multiphase Systems written by Amir Faghri and published by Academic Press. This book was released on 2006 with total page 1072 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering students in a wide variety of engineering disciplines from mechanical and chemical to biomedical and materials engineering must master the principles of transport phenomena as an essential tool in analyzing and designing any system or systems wherein momentum, heat and mass are transferred. This textbook was developed to address that need, with a clear presentation of the fundamentals, ample problem sets to reinforce that knowledge, and tangible examples of how this knowledge is put to use in engineering design. Professional engineers, too, will find this book invaluable as reference for everything from heat exchanger design to chemical processing system design and more. * Develops an understanding of the thermal and physical behavior of multiphase systems with phase change, including microscale and porosity, for practical applications in heat transfer, bioengineering, materials science, nuclear engineering, environmental engineering, process engineering, biotechnology and nanotechnology * Brings all three forms of phase change, i.e., liquid vapor, solid liquid and solid vapor, into one volume and describes them from one perspective in the context of fundamental treatment * Presents the generalized integral and differential transport phenomena equations for multi-component multiphase systems in local instance as well as averaging formulations. The molecular approach is also discussed with the connection between microscopic and molecular approaches * Presents basic principles of analyzing transport phenomena in multiphase systems with emphasis on melting, solidification, sublimation, vapor deposition, condensation, evaporation, boiling and two-phase flow heat transfer at the micro and macro levels * Solid/liquid/vapor interfacial phenomena, including the concepts of surface tension, wetting phenomena, disjoining pressure, contact angle, thin films and capillary phenomena, including interfacial balances for mass, species, momentum, and energy for multi-component and multiphase interfaces are discussed * Ample examples and end-of-chapter problems, with Solutions Manual and PowerPoint presentation available to the instructors
Download or read book Particulate Two phase Flow written by M. C. Roco and published by Butterworth-Heinemann. This book was released on 1993 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of 28 contributions on basic phenomena and advanced methods of investigation for particulate two-phase flow. Written by leading scientists in the field, this book covers new measurement methods, experimental results on particulate two-phase flow microstructure at low and large Reynolds numbers, micromechanical, probabilistic, and numerical simulations, as well as production of ultrafine particles via aerosols and colloids for materials with controlled microstructure. Each chapter is focused on the qualitative progress made in the field in the last several years and has an extensive review section and original results. This unique volume assembles information previously found only in journals and specialized publications. It is an invaluable reference for researchers and engineers from academia and industry.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Liquid Metal Magnetohydrodynamics written by J.J. Lielpeteris and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid metal MHO is within the scope of two series of international conferences. One is the International Congress on "MHD Power Generation", held every four years, which includes technical and economical aspects as well as scientific questions. The other if the Beer-Sheva Seminar on "MHO Flows and Turbulence", held every three years in Israel. In addition to these well established meetings, an IUTAM Symposium was previously organized in Cambridge (UK) in 1982 on "Metallurgical Applications of MHD" by the late Arthur Shercliff. It was focussed on a very specific subject developing radiply from the middle of the 1970's. The magnetic field was generally AC, including frequencies high enough for the skin-depth to be much smaller than the typical length scale of the liquide pool. And the development of new technologies, or the improvement of existing ones, was the main justification of most of the researches presented and discussed. Only two participants from Eastern countries attended this Symposium. By the middle of the 1980's we felt that on this very same topic ideas had reached much more maturity than in 1982. We also realized that a line of research on MHD flows related to fusion reactors (tokamaks) was developing significantly, with particular emphasis on flows at large interaction parameter.
Download or read book An Overview of Heat Transfer Phenomena written by Salim Newaz Kazi and published by IntechOpen. This book was released on 2012-10-31 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the wake of energy crisis due to rapid growth of industries, urbanization, transportation, and human habit, the efficient transfer of heat could play a vital role in energy saving. Industries, household requirements, offices, transportation are all dependent on heat exchanging equipment. Considering these, the present book has incorporated different sections related to general aspects of heat transfer phenomena, convective heat transfer mode, boiling and condensation, heat transfer to two phase flow and heat transfer augmentation by different means.
Download or read book Computational Experimental Methods in Multiphase Complex Flow IX written by P. Vorobieff and published by WIT Press. This book was released on 2017-10-11 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 9th book from this successful conference series, on Computational & Experimental Methods in Multiphase & Complex Flow, presents the latest research in one of the most challenging, yet most universally applicable areas of technology. Multiphase flows are found in all areas of technology and the range of related problems of interest is vast, including astrophysics, biology, geophysics, atmospheric process, and many areas of engineering. Recently multiphase fluid dynamics have generated a great deal of attention, leading to many notable advances in experimental, analytical and numerical studies. It is perhaps, however, work on numerical solutions which is the most noticeable owing to the continuing improvements in computer software tools. Progress in numerical methods has permitted the solution of many practical problems, helping to improve our understanding of the physics involved. The presented papers illustrate the close interaction between numerical modellers and researchers working to gradually resolve the many outstanding issues in our understanding of multiphase flow. They cover such topics as: Multiphase flow simulation; Bubble and drop dynamics; Interface behaviour; Experimental measurements; Energy applications; Compressible flows; Flow in porous media; Turbulent flow; Image processing; Heat transfer; Atomization; Hydromagnetics; Plasma; Fluidised beds; Cavitation; Multiphase chemical reactions.
Download or read book Advances in Fluid and Thermal Engineering written by Basant Singh Sikarwar and published by Springer Nature. This book was released on 2021-04-21 with total page 891 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the select proceedings of the International Conference on Future Learning Aspects of Mechanical Engineering (FLAME 2020). This volume focuses on current research in fluid and thermal engineering and covers topics such as heat transfer enhancement and heat transfer equipment, heat transfer in nuclear applications, microscale and nanoscale transport, multiphase transport and phase change, multi-mode heat transfer, numerical methods in fluid mechanics and heat transfer, refrigeration and air conditioning, thermodynamics, space heat transfer, transport phenomena in porous media, turbulent transport, theoretical and experimental fluid dynamics, flow measurement techniques and instrumentation, computational fluid dynamics, fluid machinery, turbo machinery and fluid power. Given the scope of its contents, this book will be interesting for students, researchers as well as industry professionals.
Download or read book Encyclopedia Of Two phase Heat Transfer And Flow Iv Modeling Methodologies Boiling Of Co2 And Micro two phase Cooling A 4 volume Set written by John R Thome and published by World Scientific Publishing. This book was released on 2018-05-15 with total page 1353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Set IV is a new addition to the previous Sets I, II and III. It contains 23 invited chapters from international specialists on the topics of numerical modeling of pulsating heat pipes and of slug flows with evaporation; lattice Boltzmann modeling of pool boiling; fundamentals of boiling in microchannels and microfin tubes, CO2 and nanofluids; testing and modeling of micro-two-phase cooling systems for electronics; and various special topics (flow separation in microfluidics, two-phase sensors, wetting of anisotropic surfaces, ultra-compact heat exchangers, etc.). The invited authors are leading university researchers and well-known engineers from leading corporate research laboratories (ABB, IBM, Nokia Bell Labs). Numerous 'must read' chapters are also included here for the two-phase community. Set IV constitutes a 'must have' engineering and research reference together with previous Sets I, II and III for thermal engineering researchers and practitioners.
Download or read book Proceedings of the International Field Exploration and Development Conference 2022 written by Jia'en Lin and published by Springer Nature. This book was released on 2023-08-05 with total page 7600 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on reservoir surveillance and management, reservoir evaluation and dynamic description, reservoir production stimulation and EOR, ultra-tight reservoir, unconventional oil and gas resources technology, oil and gas well production testing, and geomechanics. This book is a compilation of selected papers from the 12th International Field Exploration and Development Conference (IFEDC 2022). The conference not only provides a platform to exchanges experience, but also promotes the development of scientific research in oil & gas exploration and production. The main audience for the work includes reservoir engineer, geological engineer, enterprise managers, senior engineers as well as professional students.
Download or read book Advanced Manufacturing Processes written by Volodymyr Tonkonogyi and published by Springer Nature. This book was released on 2020-03-27 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a timely yet comprehensive snapshot of innovative research and developments in the area of manufacturing. It covers a wide range of manufacturing processes, such as cutting, coatings, and grinding, highlighting the advantages provided by the use of new materials and composites, as well as new methods and technologies. It discusses topics in energy generation and pollution prevention. It shows how computational methods and mathematical models have been applied to solve a number of issues in both theoretical and applied research. Based on selected papers presented at the Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2019), held in Odessa, Ukraine on September 10-13, 2019, this book offers a timely overview and extensive information on trends and technologies in the area of manufacturing, mechanical and materials engineering. It is also intended to facilitate communication and collaboration between different groups working on similar topics, and to offer a bridge between academic and industrial researchers.
Download or read book Upscaling of Single and Two Phase Flow in Reservoir Engineering written by Hans Bruining and published by CRC Press. This book was released on 2021-11-14 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes fundamental upscaling aspects of single-phase/two-phase porous media flow for application in petroleum and environmental engineering. Many standard texts have been written about this subject. What distinguishes this work from other available books is that it covers fundamental issues that are frequently ignored but are relevant for developing new directions to extend the traditional approach, but with an eye on application. Our dependence on fossil energy is 80–90% and is only slowly decreasing. Of the estimated 37 (~40) Gton/year, anthropogenic emissions of about 13 Gton/year of carbon dioxide remain in the atmosphere. An Exergy Return on Exergy Invested analysis shows how to obtain an unbiased quantification of the exergy budget and the carbon footprint. Thus, the intended audience of the book learns to quantify his method of optimization of recovery efficiencies supported by spreadsheet calculations. As to single-phase-one component fluid transport, it is shown how to deal with inertia, anisotropy, heterogeneity and slip. Upscaling requires numerical methods. The main application of transient flow is to find the reasons for reservoir impairment. The analysis benefits from solving the porous media flow equations using (numerical) Laplace transforms. The multiphase flow requires the definition of capillary pressure and relative permeabilities. When capillary forces dominate, we have dispersed (Buckley-Leverett flow). When gravity forces dominate, we obtain segregated flow (interface models). Miscible flow is described by a convection-dispersion equation. We give a simple proof that the dispersion coefficient can be approximated by Gelhar's relation, i.e., the product of the interstitial velocity, the variance of the logarithm of the permeability field and a correlation length. The book will appeal mostly to students and researchers of porous media flow in connection with environmental engineering and petroleum engineering.
