Download or read book Application of Bamboo in Building Envelope written by Zujian Huang and published by Springer. This book was released on 2019-05-14 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive overview of the use of bamboo in building industry. It systematically demonstrates bamboo’s utility in terms of its properties, describing the material properties of typical industrial bamboo products, and discussing their performance evaluation and optimization as building components and in the creation of building envelopes. The book also includes examples of the high-value utilization of bamboo forest resources. Further, it examines how building performance may be affected by conditions such as climate. Including insights from material science, construction design, building physics and building climatology, the book also provides data obtained from technology and market status investigation, laboratory test and the computer simulation.This book appeals to scientists and professionals, as it introduces and tests various bamboo products, demonstrating the advantages and disadvantages for each one. The book is also a valuable resource for civil engineers and students interested in this unique plant material and its application in the building industry.
Download or read book Mechanical Properties of Bamboo written by Jules J.A. Janssen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book I have collected many reports on the properties of bamboo. Since I started bamboo research in 1974, I have collected many publications on bamboo. However, in contacts with other researchers I became aware of the fact that several of these publications were unknown to them. Consequently their activities in research or in bamboo projects had to start at a lower level than if they had known some of these publications. Therefore, I discussed the need for a book like this with several colleagues, and I decided to start writing. In this book I present data on properties, as published by resear chers. Certainly it is not complete; e.g. the proceedings of the bamboo workshop in Cochin in November 1988 are not included; they arrived just too late to be taken into account. On the other hand, in writing this preface I realize I have forgotten my own thesis. I do apologize to any colleague whose relevant report is not taken into account as well. I like to express my feelings of respect to the board of my faculty: they allowed me to spend so much time on this book, and they gave a considerable financial support for the printing costs.
Download or read book Modern Bamboo Structures written by Yan Xiao and published by CRC Press. This book was released on 2008-09-01 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bamboo materials are well available in the world. Bamboo has much shorter maturity than trees, thus can be harvested with shorter cycles of plantation. Despite the fact that human society has a long history of using bamboo, there is still a lack of modern and industrialized application of bamboo materials in construction. Promoting the application
Download or read book An Adventure in Applied Science written by Robert Flint Chandler and published by Int. Rice Res. Inst.. This book was released on 1992 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Composites Industry Abstracts written by and published by . This book was released on 1996 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industrial Utilization on Bamboo written by Qisheng Zhang and published by . This book was released on 2002 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: With reference to China.
Download or read book Functionally Graded Materials in the 21st Century written by Kiyoshi Ichikawa and published by Springer Science & Business Media. This book was released on 2001 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: "In a Functionally Graded Material (FGM), which is a kind of advanced composite materials, the composition and structure change gradually over volume, resulting in corresponding changes in the properties of the material. By appyling the possibilities inherent in the concept of FGM, it is anticipated that materials will be improved and new functions for them will be also created. A comprehensive description of status of the art and perspectives, modeling and simulation, processing and system, characterization of properties as well as applications of FGMs is covered in this book."--Jacket.
Download or read book Advances in Lightweight Materials and Structures written by A. Praveen Kumar and published by Springer Nature. This book was released on 2020-10-13 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Advanced Lightweight Materials and Structures (ICALMS) 2020, and discusses the triad of processing, structure, and various properties of lightweight materials. It provides a well-balanced insight into materials science and mechanics of both synthetic and natural composites. The book includes topics such as nano composites for lightweight structures, impact and failure of structures, biomechanics and biomedical engineering, nanotechnology and micro-engineering, tool design and manufacture for producing lightweight components, joining techniques for lightweight structures for similar and dissimilar materials, design for manufacturing, reliability and safety, robotics, automation and control, fatigue and fracture mechanics, and friction stir welding in lightweight sandwich structures. The book also discusses latest research in composite materials and their applications in the field of aerospace, construction, wind energy, automotive, electronics and so on. Given the range of topics covered, this book can be a useful resource for beginners, researchers and professionals interested in the wide ranging applications of lightweight structures.
Download or read book Modern Engineered Bamboo Structures written by Y Xiao and published by CRC Press. This book was released on 2019-09-25 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fast-growing and local to some of the poorest communities in the tropics and subtropics, bamboo holds huge potential for climate change mitigation, innovative construction and job creation, but the material is rarely used for more than simple construction and household use. Modern Engineered Bamboo Structures collects the papers presented at the third International Conference on Modern Bamboo Structures (ICBS2018, Beijing, China, 25-27 June 2018). The overarching theme of the book is ‘Enhancing Cooperation for Green Development through Bamboo’s Contribution to the Sustainable Development Goals’. The contributions focus on how to realize bamboo’s huge potential in a number of areas: sustainable commodity production, disaster-resilient construction, poverty alleviation, climate change mitigation and adaptation, land restoration and biodiversity protection. Modern Engineered Bamboo Structures recognizes bamboo’s various benefits, and aims at ministers, policymakers and representatives from research institutes, development organizations, NGOs or UN bodies and the private sector.
Download or read book The Anatomy of Bamboo Culms written by Walter Liese and published by BRILL. This book was released on 1998 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given its unrivalled position in terms of diversity, distribution and uses, coupled with the vital role it plays in the rural economies of several countries around the world, bamboo has emerged in recent years as potentially the most important non-wood forest resource to replace wood in construction and other uses. Concomitantly, the interest being shown in this invaluable natural resource since the 1980s has resulted in the accumulation of a considerable body of information through research on various aspects of bamboos, including the anatomy of the bamboo culm. There is, however, no comprehensive publication available on the anatomy of bamboo culm, with the available literature being fragmented, scattered and inadequate. This landmark monograph by renowned wood biologist, forestry expert and bamboo specialist, Professor Walter Liese, whose innovative work on the study of anatomical structure using advanced microscopy and other techniques has won him wide international acclaim, fulfils the need for a comprehensive overview of current knowledge on this subject. It is the first attempt to synthesize information from studies on this subject, many of which have been contributed by Professor Liese, spread over the past four decades. By identifying gaps in the current anatomical knowledge base of bamboo culm, it is expected to stimulate further research and to act as a prime mover for knowledge generation in the key areas of bamboo anatomy, growth and taxonomy.
Download or read book Handbook of Bioenergy Crops written by N. El Bassam and published by Earthscan. This book was released on 2010 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: This completely revised second edition includes new information on biomass in relation to climate change, new coverage of vital issues including the "food versus fuel" debate, and essential new information on "second generation" fuels and advances in conversion techniques. The book begins with a guide to biomass accumulation, harvesting, transportation and storage, as well as conversion technologies for biofuels. This is followed by an examination of the environmental impact and economic and social dimensions, including prospects for renewable energy. The book then goes on to cover all the main potential energy crops.
Download or read book Agricultural Biomass Based Potential Materials written by Khalid Rehman Hakeem and published by Springer. This book was released on 2015-04-01 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Agricultural biomass is abundant worldwide and it can be considered as alternative source of renewable and sustainable materials which can be used as potential materials for different applications. Despite this enormous production of agricultural biomass, only a small fraction of the total biomass is utilized for different applications. Industry must be prepared to take advantage of the situation and utilize the available biomass in the best possible manner. Agricultural biomass such as natural fibres has been successfully investigated as a great potential to be used as a renewable and sustainable materials for the production of composite materials. Natural fibres offer excellent specific properties and have potential as outstanding reinforcing fillers in the matrix and can be used as an alternative material for biocomposites, hybrid composites, pulp, and paper industries. Natural fibre based polymer composites made of jute, oil palm, flex, hemp, kenaf have a low market cost, attractive with respect to global sustainability and find increasing commercial use in different applications. Agricultural biomass based composites find applications in a number of fields viz., automotive industry and construction industry. Future research on agricultural biomass-natural fibre based composites should not only be limited to its automotive applications but can be explored for its application in aircraft components, construction industry, rural housing and biomedical applications. In this book we will cover the chemical, physical, thermal, electrical, and biodegradability properties of agricultural biomass based composite materials and its different potential applications. The main goal of this volume is to familiarize researchers, scientists and engineers with the unique research opportunities and potentials of agricultural biomass based materials. Up-to-date information on alternative biomass utilization Academic and industry leaders discuss unique properties of biomass based composite materials Direct application of agricultural biomass materials as sustainable and renewable alternatives
Download or read book The Book of Bamboo written by David Farrelly and published by . This book was released on 1984 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bamboo’s amazing versatility, strength, and beauty have given it a larger role in human culture than any other plant. Both sustainable and plentiful, it has been used for millennia to make objects ranging from clothing and housing to more exotic luxuries like phonograph needles and children’s toys, to name but a few. This acclaimed sourcebook--part history, part illustrated catalog, part cultivation guide--details the myriad uses of bamboo, along with an immense bounty of information and lore on how to grow, maintain, and harvest this extraordinary plant; how to use it in craft and construction projects, including floors, fences, papers, and play equipment; and bamboo’s place in the literary, visual, and musical arts. An encyclopedic roster of more than 1,200 bamboo species is a book in itself, as is author David Farrelly’s A-to-Z catalog of artifacts made from bamboo: acupuncture needles, blowguns, bridges, kites, ships, violins, windmills, and a thousand other things. Strong, flexible, and beautiful in both its natural and finished states, bamboo is an abundant resource that could beneficially replace many less sustainable materials currently in use, and continue to transform our culture in the process.
Download or read book Principles and Practices of Rice Production written by Surajit K. De Datta and published by Int. Rice Res. Inst.. This book was released on 1981 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Agrindex written by and published by . This book was released on 1995 with total page 1280 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Trends in Manufacturing and Materials Towards Industry 4 0 written by Muhammed Nafis Osman Zahid and published by Springer Nature. This book was released on 2021-03-22 with total page 1025 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents part of the proceedings of the Manufacturing and Materials track of the iM3F 2020 conference held in Malaysia. This collection of articles deliberates on the key challenges and trends related to manufacturing as well as materials engineering and technology in setting the stage for the world in embracing the fourth industrial revolution. It presents recent findings with regards to manufacturing and materials that are pertinent towards the realizations and ultimately the embodiment of Industry 4.0, with contributions from both industry and academia.
Download or read book Biopulping written by and published by . This book was released on 1993 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
