EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Scientific and Technical Aerospace Reports

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Pressure Induced Phase Transformations  Volume II

Download or read book Pressure Induced Phase Transformations Volume II written by Daniel Errandonea and published by Mdpi AG. This book was released on 2023-08-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of phase transitions in materials under high pressure and high temperature is a very active research field. In the last few decades, many important discoveries have been made thanks to the development of experimental techniques and computer simulation methods. Many of these achievements affect various research fields ranging from solid-state physics, chemistry, and materials science to geophysics. They not only involve deepening knowledge on solid-solid phase transitions, but also a better understanding of melting under compression. These modern discoveries, as well as the impact of pressure on structural, chemical, and physical properties, are central to the current Special Issue. Amongst other topics, it places particular emphasis on phase transitions and their effects on different physical properties.

Book Compounds and Alloys Under High Pressure

Download or read book Compounds and Alloys Under High Pressure written by E. Yu Tonkov and published by CRC Press. This book was released on 1998-10-23 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book to classify and systematize the available data on the behavior of binary alloys under high pressure. Despite the fact that there is a strong correlation between temperature-composition (T-C) phase diagrams at normal pressure and three- dimensional temperature-composition-pressure (T-C-P) diagrams, many material scientists seldom refer to the (T-C-P) diagrams, just as many high pressure researchers often ignore the data obtained at normal pressure. This book aims to bridge the gap between data obtained at high pressure and that obtained at normal pressure. The most recent research covers not only elements and stoichiometric compounds, but also binary, ternary, and multicomponent alloys, and so this book covers an extended range of substances. The properties of 890 binary systems and a further 1153 pseudobinary and ternary systems are summarized, and accompanied by an extensive bibliography. The data includes information on the solubility of components in solid solutions, melting, and first- and second-order phase transformations in alloys and stoichiometric compounds.

Book Phase Transitions in Solids Under High Pressure

Download or read book Phase Transitions in Solids Under High Pressure written by Vladimir Davydovich Blank and published by CRC Press. This book was released on 2013-10-25 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of high-pressure techniques has become popular for studying the nature of substances and phenomena occurring in them, especially as a means of obtaining new materials (synthesis under high pressure) and processing known materials (hydroextrusion). A product of many years of research by the authors and their colleagues, Phase Transitions in Solids under High Pressure discusses the relationships of phase transformations in solids under high pressure, the mechanism of these transformations, crystal geometry, the effect of deformation, the conditions of formation, and preservation of the high-pressure phases under normal pressure. The book begins with an introduction that describes the relationship of the thermodynamics of phase transformations and the kinetics of the transformations. This is followed by a chapter explaining the equipment and mostly original procedures for investigating phase transformation in solids under high hydrostatic and quasi-hydrostatic pressures. The book covers phase transformations under high pressure in a wide temperature range in the elements carbon, silicon, germanium, titanium, zirconium, iron, gallium, and cerium as well as in titanium- and iron-based alloys and AIBVII, AIIBVI, and AIIIBV compounds. In addition, the book examines the kinetics of phase transformations in iron-based alloys in isobaric–isothermal conditions. The authors present results for phase transformations in deformation under high pressure, describe several non-trivial effects associated with phase transformations under high pressure, and analyze the kinetics and hysteresis of high-temperature and low-temperature phase transformations. They conclude by describing the role of investigations under high pressure for determining general relationships governing phase transformations in solids.

Book Phase Transformations of Elements Under High Pressure

Download or read book Phase Transformations of Elements Under High Pressure written by E. Yu Tonkov and published by CRC Press. This book was released on 2018-10-08 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: As laboratories replace heavy hydraulic presses and bulky high-pressure chambers with miniature diamond anvils, traditional heaters with laser heating, and continue to improve methods of shock compression, there has been considerable new data obtained from the high-pressure, high-temperature modification of pure elements. The dense metallic modification of elements shows the potential for achieving superconductivity akin to theoretical predictions. Phase Transformations of Elements Under High Pressure contains the latest theoretical and experimental information on nearly 100 elements, including first-and second-phase transitions, melting lines, crystal structures of stable and metastable phases, stability of polymorphic modifications, and other useful properties and data. It emphasizes features such as changes in the liquid state, amorphization, and metallization, and provides temperature-pressure diagrams for every element. The book also describes the transitions of polymeric forms of fullerene, crystal modifications of elements stable under high pressures, and provides data that confirms their superconducting and magnetic properties. This handbook will be a lasting reference for scientists in a broad range of disciplines, including solid-state physics, chemistry, crystallography, mineralogy, and materials science.

Book Compounds and Alloys Under High Pressure

Download or read book Compounds and Alloys Under High Pressure written by E.Yu Tonkov and published by Taylor & Francis. This book was released on 2022 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book to classify and systematize the available data on the behavior of binary alloys under high pressure. Despite the fact that there is a strong correlation between temperature-composition (T-C) phase diagrams at normal pressure and three- dimensional temperature-composition-pressure (T-C-P) diagrams, many material scientists seldom refer to the (T-C-P) diagrams, just as many high pressure researchers often ignore the data obtained at normal pressure. This book aims to bridge the gap between data obtained at high pressure and that obtained at normal pressure. The most recent research covers not only elements and stoichiometric compounds, but also binary, ternary, and multicomponent alloys, and so this book covers an extended range of substances. The properties of 890 binary systems and a further 1153 pseudobinary and ternary systems are summarized, and accompanied by an extensive bibliography. The data includes information on the solubility of components in solid solutions, melting, and first- and second-order phase transformations in alloys and stoichiometric compounds.

Book Pressure Induced Phase Transitions in AB2X4 Chalcogenide Compounds

Download or read book Pressure Induced Phase Transitions in AB2X4 Chalcogenide Compounds written by Francisco Javier Manjon and published by Springer. This book was released on 2016-08-23 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on pressure-induced phase transitions in AB2X4 chalcogenide compounds deals with one important AmBnXp material. The interest in these materials is caused by their properties. The results are discussed for three main groups of structural families: cubic-spinel structures, defective tetragonal structures, and other structures like layered and wurtzite-type modifications. A systematic analysis of the behavior of cubic (spinel), tetragonal (defect chalcopyrites and stannites) and other crystal modifications of AB2X4 compounds under hydrostatic pressure is performed. The behavior of AIIAl2S4, AIIGa2S4, AIIAl2Se4 and AIIGa2Se4 compounds with defective tetragonal structures, compounds with layered and wurtzite structures under hydrostatic pressure and the pressure dependence of the band gap, lattice parameters, interatomic distances, vibrational modes and pressure-induced phase transitions is discussed. Many of these compounds, except oxide spinels, undergo a pressure-induced phase transition towards the rocksalt-type structure. The phase transition is preceded by disorder in the cation sublattice. The dependence of the transition pressure to the rocksalt-type structure as a function of the compound ionicity and the size criterion is analyzed. At high pressures, all ordered-vacancy compounds are found to exhibit a band anticrossing between several conduction bands that leads to a strong decrease of its pressure coefficient and consequently to a strong non-linear pressure dependence of the direct bandgap energy. Theoretical studies of phase transitions in several ordered-vacancy compounds reveal that the existence of ordered vacancies alter the cation-anion bond distances and their compressibilities. The book is written for students, Ph D. students and specialists in materials science, phase transitions and new materials.

Book Phase Transformations

Download or read book Phase Transformations written by Srikumar Banerjee and published by Elsevier. This book was released on 2010-05-31 with total page 837 pages. Available in PDF, EPUB and Kindle. Book excerpt: The terms phase transitions and phase transformations are often used in an interchangeable manner in the metallurgical literature. In Phase Transformations, transformations driven by pressure changes, radiation and deformation and those occurring in nanoscale multilayers are brought to the fore. Order-disorder transformations, many of which constitute very good examples of continuous transformations, are dealt with in a comprehensive manner. Almost all types of phase transformations and reactions that are commonly encountered in inorganic materials are covered and the underlying thermodynamic, kinetic and crystallographic aspects elucidated. Shows readers the advancements in the field - due to enhanced computing power and superior experimental capability Drawing upon the background and the research experience of the authors, bringing together a wealth of experience Written essentially from a physical metallurgists view point

Book Comprehensive Dissertation Index

Download or read book Comprehensive Dissertation Index written by and published by . This book was released on 1989 with total page 1116 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Statics and Dynamics of Alloy Phase Transformations

Download or read book Statics and Dynamics of Alloy Phase Transformations written by Patrice E.A. Turchi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of phase transformations in substitutional alloys, including order disorder phenomena and structural transformations, plays a crucial role in understanding the physical and mechanical properties of materials, and in designing alloys with desired technologically important characteristics. Indeed, most of the physical properties, including equilibrium properties, transport, magnetic, vibrational as well as mechanical properties of alloys are often controlled by and are highly sensitive to the existence of ordered compounds and to the occurrence of structural transformations. Correspondingly, the alloy designer facing the task of processing new high-performance materials with properties that meet specific industrial applications must answer the following question: What is the crystalline structure and the atomic configuration that an alloy may exhibit at given temperature and concentration? Usually the answer is sought in the phase-diagram of a relevant system that is often determined experimentally and does not provide insight to the underlying mechanisms driving phase stability. Because of the rather tedious and highly risky nature of developing new materials through conventional metallurgical techniques, a great deal of effort has been expended in devising methods for understanding the mechanisms contrOlling phase transformations at the microscopic level. These efforts have been bolstered through the development of fully ab initio, accurate theoretical models, coupled with the advent of new experimental methods and of powerful supercomputer capabilities.

Book Nuclear Science Abstracts

Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1976 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Dissertation Abstracts International

Download or read book Dissertation Abstracts International written by and published by . This book was released on 1978 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Energy Research Abstracts

Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Proceedings of the 13th World Conference on Titanium

Download or read book Proceedings of the 13th World Conference on Titanium written by Vasisht Venkatesh and published by John Wiley & Sons. This book was released on 2016-04-26 with total page 4024 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the Proceedings of the 13th World Conference on Titanium.

Book Pressure Induced Phase Transformations

Download or read book Pressure Induced Phase Transformations written by Daniel Errandonea and published by . This book was released on 2020-09-04 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue of Crystals entitled Pressure-Induced Phase Transformations. It includes selected articles on the behavior of matter under high-pressure and high-temperature conditions, describing and discussing contemporary achievements, which were selected based on their relevance and scientific quality.

Book Metals Abstracts

Download or read book Metals Abstracts written by and published by . This book was released on 1992 with total page 1516 pages. Available in PDF, EPUB and Kindle. Book excerpt: