Download or read book Experimental Investigation of Bulk Flame Quenching in a Direct injection Spark Ignition Engine written by Tyson E. Strand and published by . This book was released on 2001 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Investigation of Flame front Equivalence Ratio During Stratified Engine Combustion written by David A. Rothamer and published by . This book was released on 2002 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Automotive Spark Ignited Direct Injection Gasoline Engines written by F. Zhao and published by Elsevier. This book was released on 2000-02-08 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: The process of fuel injection, spray atomization and vaporization, charge cooling, mixture preparation and the control of in-cylinder air motion are all being actively researched and this work is reviewed in detail and analyzed. The new technologies such as high-pressure, common-rail, gasoline injection systems and swirl-atomizing gasoline fuel injections are discussed in detail, as these technologies, along with computer control capabilities, have enabled the current new examination of an old objective; the direct-injection, stratified-charge (DISC), gasoline engine. The prior work on DISC engines that is relevant to current GDI engine development is also reviewed and discussed. The fuel economy and emission data for actual engine configurations have been obtained and assembled for all of the available GDI literature, and are reviewed and discussed in detail. The types of GDI engines are arranged in four classifications of decreasing complexity, and the advantages and disadvantages of each class are noted and explained. Emphasis is placed upon consensus trends and conclusions that are evident when taken as a whole; thus the GDI researcher is informed regarding the degree to which engine volumetric efficiency and compression ratio can be increased under optimized conditions, and as to the extent to which unburned hydrocarbon (UBHC), NOx and particulate emissions can be minimized for specific combustion strategies. The critical area of GDI fuel injector deposits and the associated effect on spray geometry and engine performance degradation are reviewed, and important system guidelines for minimizing deposition rates and deposit effects are presented. The capabilities and limitations of emission control techniques and after treatment hardware are reviewed in depth, and a compilation and discussion of areas of consensus on attaining European, Japanese and North American emission standards presented. All known research, prototype and production GDI engines worldwide are reviewed as to performance, emissions and fuel economy advantages, and for areas requiring further development. The engine schematics, control diagrams and specifications are compiled, and the emission control strategies are illustrated and discussed. The influence of lean-NOx catalysts on the development of late-injection, stratified-charge GDI engines is reviewed, and the relative merits of lean-burn, homogeneous, direct-injection engines as an option requiring less control complexity are analyzed.
Download or read book Fuel Film Temperature and Thickness Measurements on the Piston Crown of a Direct injection Spark ignition Engine written by Soochan Park and published by . This book was released on 2003 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Characterization of Operating Parameters Authority on the Flow field Mixedness of a DISI Engine written by Matthew A. Wiles and published by . This book was released on 2003 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Emission Control and Fuel Economy written by John H Johnson and published by SAE International. This book was released on 2005-06-27 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emission and fuel economy regulations and standards are compelling manufacturers to build ultra-low emission vehicles. As a result, engineers must develop spark-ignition engines with integrated emission control systems that use reformulated low-sulfur fuel. Emission Control and Fuel Economy for Port and Direct Injected SI Engines is a collection of SAE technical papers that covers the fundamentals of gasoline direct injection (DI) engine emissions and fuel economy, design variable effects on HC emissions, and advanced emission control technology and modeling approaches. All papers contained in this book were selected by an accomplished expert as the best in the field; reprinted in their entirety, they present a pathway to integrated emission control systems that meet 2004-2009 EPA standards for light-duty vehicles.
Download or read book Combustion and Mass Transfer written by D Brian Spalding and published by Elsevier. This book was released on 2013-10-22 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion and Mass Transfer: A Textbook with Multiple-Choice Exercises for Engineering Students is a 20-chapter lecture text that covers various aspects of combustion and mass transfer. Each of the 20 chapters is provided with a set partly analytical and multiple-choice tutorial exercises, designed to assist the student to understand the material of the lectures. The opening chapters deal with the importance of combustion and mass transfer processes. The succeeding chapters survey the concepts and principles of droplet vaporization, droplet combustion, liquid-propellant rocket, and laminar and turbulent jet. These topics are followed by discussions of laminar and turbulent diffusion flame, kinetically-influenced phenomena, chemical kinetics, and spontaneous ignition. The remaining chapters consider the basic concepts of stirred reactor, flame stabilization, laminar flame propagation, spark ignition, and coal-particle combustion. This book is intended for undergraduate mechanical engineering students.
Download or read book Proceedings of the Spring Technical Conference of the ASME Internal Combustion Engine Division written by American Society of Mechanical Engineers. Internal Combustion Engine Division. Spring Technical Conference and published by . This book was released on 2000 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Spray Mixing in Engines written by Daniel M. Probst and published by . This book was released on 2001 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1980 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Combustion Processes written by Sara McAllister and published by Springer Science & Business Media. This book was released on 2011-05-10 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Combustion Processes is designed as a textbook for an upper-division undergraduate and graduate level combustion course in mechanical engineering. The authors focus on the fundamental theory of combustion and provide a simplified discussion of basic combustion parameters and processes such as thermodynamics, chemical kinetics, ignition, diffusion and pre-mixed flames. The text includes exploration of applications, example exercises, suggested homework problems and videos of laboratory demonstrations
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1984 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Annual Index abstracts of SAE Technical Papers written by and published by . This book was released on 2007 with total page 1218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cumulative Index of The SAE Papers written by Society of Automotive Engineers and published by . This book was released on 1965 with total page 1646 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modelling Diesel Combustion written by P. A. Lakshminarayanan and published by Springer Science & Business Media. This book was released on 2010-03-03 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phenomenology of Diesel Combustion and Modeling Diesel is the most efficient combustion engine today and it plays an important role in transport of goods and passengers on land and on high seas. The emissions must be controlled as stipulated by the society without sacrificing the legendary fuel economy of the diesel engines. These important drivers caused innovations in diesel engineering like re-entrant combustion chambers in the piston, lower swirl support and high pressure injection, in turn reducing the ignition delay and hence the nitric oxides. The limits on emissions are being continually reduced. The- fore, the required accuracy of the models to predict the emissions and efficiency of the engines is high. The phenomenological combustion models based on physical and chemical description of the processes in the engine are practical to describe diesel engine combustion and to carry out parametric studies. This is because the injection process, which can be relatively well predicted, has the dominant effect on mixture formation and subsequent course of combustion. The need for improving these models by incorporating new developments in engine designs is explained in Chapter 2. With “model based control programs” used in the Electronic Control Units of the engines, phenomenological models are assuming more importance now because the detailed CFD based models are too slow to be handled by the Electronic Control Units. Experimental work is necessary to develop the basic understanding of the pr- esses.
Download or read book Automotive Engine Alternatives written by Robert L. Evans and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of the International Symposium on Alternative and Advanced Automotive Engines, held in Vancouver, B.C., on August 11 and 12, 1986. The symposium was sponsored by EXPO 86 and The University of British Columbia, and was part of the specialized periods program of EXPO 86, the 1986 world's fair held in Vancouver. Some 80 attendees were drawn from 11 countries, representing the academic, auto motive and large engine communities. The purpose of the symposium was to provide a critical review of the major alternatives to the internal combustion engine. The scope of the symposium was limited to consideration of combustion engines, so that electric power, for example, was not considered. This was not a reflec tion on the possible contribution which electric propulsion may make in the future, but rather an attempt to focus the proceedings more sharply than if all possible propulsion systems had been considered. In this way all of the contributors were able to participate in the sometimes lively discussion sessions following the presentation of each paper.
Download or read book SAE Transactions written by Society of Automotive Engineers and published by . This book was released on 1967 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vols. for include index which has title: SAE transactions and literature developed.
