Download or read book Experimental Determination of Sealing Pressure of a Press in place Gasket written by and published by . This book was released on 2020 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Press-in-Place (PIP) gasket is a static face seal with self-retaining feature, which is used for the mating surfaces of engine components to maintain the reliability of the closed system under various operating conditions. Its design allows it to provide enough contact pressure to seal the internal fluid as well as prevent mechanical failures. Insufficient sealing pressure will lead to fluid leakage, consequently resulting in engine failures. A test fixture was designed to simulate the clamp load and internal pressure condition on a gasketed bolted joint. Tekscan equipment was used to capture the overall and local pressure distribution of the PIP gasket under various loading conditions. Then, the test results were compared with simulated results from computer models. Through the comparisons, it was found that sealing pressure of test data and CAE data are close in all internal pressure cases when the bolt load is 500N. Compared to 20 psi & 40 psi, better correlation to CAE results was observed at 0 psi pressure condition. Besides, CAE results closely match with test results for NMC condition for all load cases. Moveover, the cross-sectional pressure distribution obtained by experimental tests and CAE models correlated very well at different locations.

Download or read book Instruments and Experimental Techniques written by and published by . This book was released on 1959 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Tribology Design written by Mark Hadfield and published by WIT Press. This book was released on 2010 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Tribology and Design Conference explores the role of technology and design in the broader sense. It brings together colleagues from different disciplines interested in problems of surface interaction and design. The applications covered range from geomechanics to nano problems and from sustainability issues to advanced materials. It has never been so important for the designer to consider product and system durability in relation to reliability and sustainability issues. The topics for discussion also cover studies of tribology in nature and how the resulting lessons can be applied by the designers. Another important theme is the application of tribology in biomechanics, a field in which surface mechanics in general is of fundamental importance. This book contains the papers presented at the Third International Conference, arranged into the following subject areas: Design Tools; Test Methods; Surface Engineering; Tribology under Extreme Conditions; Surface Measurements & Lubrication.

Download or read book Materials and Contact Characterisation VIII written by C.A. Brebbia and published by WIT Press. This book was released on 2017-09-20 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Material and contact characterisation is a rapidly advancing field that requires the application of a combination of numerical and experimental methods. Including papers from the International Conference on Computational Methods and Experiments in Material and Contact Characterisation this volume presents the latest research in the field.

Download or read book Pressure Distributions Around Two dimensional Labyrinth Seal Chambers written by Eva A. Czajkowski and published by . This book was released on 1985 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Gaskets and Gasketed Joints written by John Bickford and published by CRC Press. This book was released on 2014-07-17 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together decades of research findings into a single, coherent source, this practical guide discusses industrial, automotive, and chemical gasket types and materials from selection, installation, and testing to applications and problem-solving and prevention methods. The coverage includes, but is not limited to, the complex mechanical and l

Download or read book Characterization and Application of Magneto sensitive Soft Materials written by Zhili Zhang and published by Frontiers Media SA. This book was released on 2023-09-29 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magneto-sensitive soft materials are new synthetic functional materials that is normally composed of ferromagnetic or ferrimagnetic particles (size in a range from several nanometers to hundreds of micrometers), carriers (including water, organic solvent, liquids, gels, polymer and foams), surfactants and necessary additives. Being different from “hard” solid materials, “soft” means magneto-sensitive materials exist in the form of colloidal liquids, gels, and elastomers, such as magnetic fluids (MF), also called ferrofluids, magnetic liquids, magnetorheological fluids (MRF), magnetorheological gels (MRG), magnetorheological elastomers (MRE) and magnetorheological foams (MRFoam), so as to possess fluidity and magnetism simultaneously and can be easily deformed by applying external magnetic field force.

Download or read book Gas Thermohydrodynamic Lubrication and Seals written by Bai Shaoxian and published by Academic Press. This book was released on 2019-07-10 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas Thermohydrodynamic Lubrication and Seals provides contemporary theory and methods for thermo-hydrodynamic lubrication analysis in the design of gas bearings and seals. The title includes information on gas state equations and gas property, derivation of gas thermohydrodynamic lubrication equations, the theory of isothermal gas lubrication, thermal gas lubrication of rigid surfaces, gas thermoelastic hydrodynamic lubrication of face seals, vapor-condensed gas lubrication of face seals, experimental methods, and the design of gas face seals. Readers will find state-of-the-art, practical knowledge based on fifty years of research and application. - Describes thermohydrodynamic lubrication analysis for the design of gas bearings and seals - Considers the increased operational speed, pressure and temperature of mechanical equipment in relation to gas bearings and seals - Describes multi-field coupled gas lubrication theory and analytical methods - Provides a model and detailed data on the lubricating properties of typical gas bearings and seals - Gives comprehensive coverage of the field based on a half-century of research and application

Download or read book Hydromechanical and Thermohydromechanical Behaviour of Deep Argillaceous Rock Theory and Experiments written by N. Hoteit and published by CRC Press. This book was released on 2002-01-01 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: These papers address state-of-the-art knowledge of thermo-hydro-mechanical behaviours of deep argillaceous rocks. They introduce achievements in laboratory test methods for determining the coupling parameters of deep argillaceous rocks, amongst other things.

Download or read book Experimental Determination of Dynamic Force Coefficients of a Pocket Damper Seal at Higher Frequencies written by Ashish Sharma and published by . This book was released on 2001 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Journal of Basic Engineering written by and published by . This book was released on 1965 with total page 1184 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Tribology and Design II written by Mark Hadfield and published by WIT Press. This book was released on 2012 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today it is more important than ever for designers to consider product and system durability in relation to reliability and sustainability issues. Containing papers presented at the Fourth International Conference on Tribology and Design, Tribology and Design II brings together work by colleagues from different disciplines interested in problems of surface interaction and design. The topics covered include; Design tools; Test methods; Surface engineering; Tribology under extreme conditions; Surface measurements; Advances in lubrication; Wear mechanics; Plasticizers and slip additives; Tribology in biomechanics; Nano-tribology and design; Tribology in space applications; Reliability and life-oriented design; Advanced materials.

Download or read book Proceedings of the Fifth International Technical Symposium on Deepwater Oil and Gas Engineering written by Baojiang Sun and published by Springer Nature. This book was released on with total page 665 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sealing of Boreholes and Underground Excavations in Rock written by K. Fuenkajorn and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sealing of boreholes and underground excavations has not received much engineering attention until fairly recently. The growing awareness of and sensitivity to environmental concerns of the technical community as well as of the public at large has resulted in an increasing recognition of the fact that these geological penetrations may have an environmental impact. The issue of possible contamination resulting from migration along boreholes, adits, shafts or tunnels unquestionably has been raised most forcefully with in the context of nuclear waste disposal. Several nuclear waste disposal programs, notably the Civilian and the Defence programs of the US De partment of Energy, the US Nuclear Regulatory Commission and the Canadian and Swedish radioactive waste disposal programs have conducted major research efforts aimed at developing adequate seal designs for penet rations in host rock formations for high-level nuclear waste repositories. While a considerable data base has been gathered over the last two decades or so with regard to the performance of seals, most of the information is presented in research reports and widely scattered papers in journals and proceedings of conferences. Hence, the materials are not readily accessible to potential users such as designers, contractors or regulators who are not familiar with nuclear waste disposal programs.

Download or read book Proceedings of the Third International Conference on Fluid Sealing Cambridge England 1967 written by BHRA (Association) and published by . This book was released on 1967 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Search of Excellence ANTEC 91 written by Society of Plastic Engineers and published by CRC Press. This book was released on 1991-05-01 with total page 2914 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Selected Annotated Bibliography of Studies Relevant to the Isolation of Nuclear Wastes written by and published by . This book was released on 1980 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: