Download or read book A Finite Element Head Injury Model Theory development and results written by T. A. Shugar and published by . This book was released on 1977 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Finite Element Model of the Human Head for Simulation of Bone conducted Sound written by You Chang and published by Linköping University Electronic Press. This book was released on 2018-04-03 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bone conduction is usually understood as the hearing sensation based on the vibrations of the skull bone and surrounding tissues. The fact that vibration of the skull bones can result in a sound percept has been known for a long time. However, it is difficult to give a general definition of BC sound. Normally, BC sound is described as the sound energy transmitted through the body (comprising the solid and fluid parts) then the outer, middle and inner ear are involved and finally produce a perception of sound. Even if BC sound perception has been studied for more than a century, the whole pattern of BC sound transmission is still not complete. There are limitations for experimental investigation of BC sound, such as the complexity of experimental manipulations and individual differences between subjects resulting in difficult to interpret outcomes. One way to overcome some of those issues is the use of a simulation model for BC sound. However, until now, the published models are unable to provide a holistic response of BC sound in the human. Therefore, the primary aim of this thesis is to develop a finite element model that could simulate BC sound transmission in the human. Based on cryosectional images of a female, the LiUHead was developed as a FE model of the human head with the structure and material properties of real human. Most the structures and tissues which could contribute to the BC transmission were included in the LiUHead. The simulation results of the LiUHead agreed with experimental data obtained in both cadaver heads and live humans. After the development and validation of the LiUHead, the model was used to investigate BC sound. Since BC sound is transmitted in and between the tissues, the power transmission of BC sound was investigated in the LiUHead in the frequency domain. When the stimulation was applied on the surface of the skull at the mastoid position, the results of the simulations show that, as the name suggest, the skull bone dominants the BC sound transmission. The soft tissues and cartilages are as the second most important media of the BC sound while the skull interior is the least important for the BC transmission. Moreover, according to the power flux in the skull, the BC vibrations are mainly concentrated at the skull base. Other important transmission pathways are located at the occipital bone at the posterior side of the head, but the power transmitted over the face, forehead and vertex is minor. There is power interaction between the skull bone and skull interior near the stimulation position but the transmission of sound power through the brain seem to be minimal. Since the power or energy is difficult to measure in an experimental setting, this investigation gave unique knowledge about BC sound transmission in the head and the interaction between the tissues. As a common application for BC sound, bone-conduction devices are used to stimulate the hearing and is a method for hearing loss rehabilitation. Nowadays many different kinds of BCDs are available. However, most studies failed to compare the different types of BCDs in the same conditions as well as between several BCDs as it is not possible to compare several BCDs within the same subject due to the implantation required for several BCDs. The model gives a unique opportunity to evaluate various BCDs in the same head. Eight different BCDs, including four kinds of skin-drive BCDs, three kinds of direct-drive BCDs, and one in-the-mouth device, were applied to the LiUHead and the simulation results were evaluated. The results proved that the direct-drive BCDs and the in-the-mouth device gave similar vibration responses at the cochlea. At low frequencies, the skin-drive BCDs had similar or even better cochlear responses than the direct-drive BCDs. However, the direct-drive BCDs gave stable responses at mid-frequencies and gave higher responses than the skin-drive BCDs at high frequencies. These results are beneficial evaluating and for designing and improving current BCDs. The ultimate goal of this thesis is to provide a computational model for BC sound that can be used for evaluation of BC sound transmission. This was accomplished by the LiUHead that gave results comparable to experimental data and enabled investigations that cannot easily be conducted in experiments.
Download or read book The Mechanobiology and Mechanophysiology of Military Related Injuries written by Amit Gefen and published by Springer. This book was released on 2016-03-31 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a state-of-the-art update, as well as perspectives on future directions of research and clinical applications in the implementation of biomechanical and biophysical experimental, theoretical and computational models which are relevant to military medicine. Such experimental and modeling efforts are helpful, on the one hand, in understanding the aetiology, pathophysiology and dynamics of injury development and on the other hand in guiding the development of better equipment and protective gear or devices that should ultimately reduce the prevalence and incidence of injuries or lessen their hazardous effects. The book is useful for military-oriented biomedical engineers and medical physicists, as well as for military physiologists and other medical specialists who are interested in the science and technology implemented in modern investigations of military related injuries.
Download or read book The 15th International Conference on Biomedical Engineering written by James Goh and published by Springer Science & Business Media. This book was released on 2013-11-18 with total page 998 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the processing of the 15th ICMBE held from 4th to 7th December 2013, Singapore. Biomedical engineering is applied in most aspects of our healthcare ecosystem. From electronic health records to diagnostic tools to therapeutic, rehabilitative and regenerative treatments, the work of biomedical engineers is evident. Biomedical engineers work at the intersection of engineering, life sciences and healthcare. The engineers would use principles from applied science including mechanical, electrical, chemical and computer engineering together with physical sciences including physics, chemistry and mathematics to apply them to biology and medicine. Applying such concepts to the human body is very much the same concepts that go into building and programming a machine. The goal is to better understand, replace or fix a target system to ultimately improve the quality of healthcare. With this understanding, the conference proceedings offer a single platform for individuals and organizations working in the biomedical engineering related field to gather and network with each other in so doing create the catalyst for future development of biomedical engineering in Asia.
Download or read book Issues in Biomedical Engineering Research and Application 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 1453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Biomedical Engineering Research and Application: 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Biomedical Engineering Research and Application. The editors have built Issues in Biomedical Engineering Research and Application: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Biomedical Engineering Research and Application in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Biomedical Engineering Research and Application: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book HRIS Abstracts written by and published by . This book was released on 1990 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Anthropometry written by Victor R. Preedy and published by Springer Science & Business Media. This book was released on 2012-02-02 with total page 3039 pages. Available in PDF, EPUB and Kindle. Book excerpt: Anthropometry is the physical measurement of linear growth and body composition. In this handbook all facets and features of anthropometry are described. Each chapter includes applications to other areas of health and disease.
Download or read book The Biomechanics of Impact Injury written by Albert I. King and published by Springer. This book was released on 2017-07-21 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text acquaints the reader on the biomechanics of injury to the human body caused by impact and the use of computer models to simulate impact events. It provides a basic understanding of the biomechanics of the injuries resulting from the impact to the head, neck, chest, abdomen, spine, pelvis and the lower extremities, including the foot and ankle. Other topics include side impact, car-pedestrian impact, effectiveness of automotive restraint systems and sports-related injuries. Featuring problems and PowerPoint slides for lectures, the volume is ideal for students in graduate programs in biomechanics, as well as practicing engineers, and researchers in the life sciences concerned with orthopedics.
Download or read book Brain and Human Body Modeling written by Sergey Makarov and published by Springer Nature. This book was released on 2019-08-27 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book describes modern applications of computational human modeling with specific emphasis in the areas of neurology and neuroelectromagnetics, depression and cancer treatments, radio-frequency studies and wireless communications. Special consideration is also given to the use of human modeling to the computational assessment of relevant regulatory and safety requirements. Readers working on applications that may expose human subjects to electromagnetic radiation will benefit from this book’s coverage of the latest developments in computational modelling and human phantom development to assess a given technology’s safety and efficacy in a timely manner. Describes construction and application of computational human models including anatomically detailed and subject specific models; Explains new practices in computational human modeling for neuroelectromagnetics, electromagnetic safety, and exposure evaluations; Includes a survey of modern applications for which computational human models are critical; Describes cellular-level interactions between the human body and electromagnetic fields.
Download or read book Finite Element Analysis for Biomedical Engineering Applications written by Z. Yang and published by CRC Press. This book was released on 2019-03-14 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finite element analysis has been widely applied to study biomedical problems. This book aims to simulate some common medical problems using finite element advanced technologies, which establish a base for medical researchers to conduct further investigations. This book consists of four main parts: (1) bone, (2) soft tissues, (3) joints, and (4) implants. Each part starts with the structure and function of the biology and then follows the corresponding finite element advanced features, such as anisotropic nonlinear material, multidimensional interpolation, XFEM, fiber enhancement, UserHyper, porous media, wear, and crack growth fatigue analysis. The final section presents some specific biomedical problems, such as abdominal aortic aneurysm, intervertebral disc, head impact, knee contact, and SMA cardiovascular stent. All modeling files are attached in the appendixes of the book. This book will be helpful to graduate students and researchers in the biomedical field who engage in simulations of biomedical problems. The book also provides all readers with a better understanding of current advanced finite element technologies. Details finite element modeling of bone, soft tissues, joints, and implants Presents advanced finite element technologies, such as fiber enhancement, porous media, wear, and crack growth fatigue analysis Discusses specific biomedical problems, such as abdominal aortic aneurysm, intervertebral disc, head impact, knee contact, and SMA cardiovascular stent Explains principles for modeling biology Provides various descriptive modeling files
Download or read book IUTAM Symposium on Impact Biomechanics From Fundamental Insights to Applications written by M. D. Gilchrist and published by Springer Science & Business Media. This book was released on 2005-10-13 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Substantialfundamental workhas been undertaken inthe different aspects of impact biomechanics over the past three decades. Much of this has been motivated and undertaken bythe automotive industry intheirefforts to improve transport safety. More recently, however, it has become app- ent that themultidisciplinary synergies which are realisedby interactions between engineers, scientists and clinical practitioners will ultimately lead to a greater understanding of the complex interacting phenomena withinthe human bodyafter it has sustained an impact. In turn, this greater depth of knowledge will provide more fundamentalinsights into the analysis, d- gnosis, treatment and prevention ofimpact injuries across a broader sp- trum of accident environments. Thescienti?c focus of this IUTAM symposium istoaddress those t- ics that are centrally important to the biomechanics ofimpact. These can be groupedinto those that are concerned with the different causes of - cidents (e. g., transport, occupational and sports injuries), themechanics - volvedinaccident analysis (e. g., accident investigation, computational m- elling techniques), the different types of resulting traumatic injuries (incl- ing musculoskeletal, organ, spinal and head injuries), methods of asse- ing the extent of injury (e. g., injury assessment, injury criteria, constitutive laws for human tissue), and providing protection during an impact (e. g., injury prevention, energy absorption materials, and safety devices).
Download or read book Report International Technical Conference on Experimental Safety Vehicles written by and published by . This book was released on 1974 with total page 1046 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of Rehabilitation Research Development written by and published by . This book was released on 1997 with total page 962 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Review of Automotive Engineering JSAE written by and published by 社団法人自動車技術会(JSAE). This book was released on with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Subject Bibliography from Highway Safety Literature written by United States. National Highway Traffic Safety Administration and published by . This book was released on 1979 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technical Reports of the National Highway Traffic Safety Administration a Bibliography 1978 written by L. Flynn (comp) and published by . This book was released on 1979 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Technical Conference on Experimental Safety Vehicles Eleventh Proceedings written by and published by . This book was released on 1988 with total page 946 pages. Available in PDF, EPUB and Kindle. Book excerpt:
