Download or read book Experimental and Theoretical Studies of Hf Ta and Ta2 Reacting with Methane written by Laura Grace Parke and published by . This book was released on 2009 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Experimental and Theoretical Studies of Activation of Methane and Hydrogen by Third Row Transition Metal Ions Rhenium Iridium and Gold written by Fengxia Li and published by . This book was released on 2007 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Direct Hydroxylation of Methane written by Kazunari Yoshizawa and published by Springer Nature. This book was released on 2020-10-29 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on theoretical and computational studies by the editor’s group on the direct hydroxylation of methane, which is one of the most challenging subjects in catalyst chemistry. These studies of more than 20 years include gas-phase reactions by transition-metal oxide ions, enzymatic reactions by two types of methane monooxygenase (soluble and particulate MMO), catalytic reactions by metal-exchanged zeolites, and methane C–H activation by metal oxide surfaces. Catalyst chemistry has been mostly empirical and based on enormous experimental efforts. The subject of the title has been tackled using the orbital interaction and computations based on extended Hückel, DFT, and band structure calculations. The strength of the theoretical studies is in the synergy between theory and experiment. Therefore, the group has close contacts with experimentalists in physical chemistry, catalyst chemistry, bioinorganic chemistry, inorganic chemistry, and surface chemistry. This resulting book will be useful for the theoretical analysis and design of catalysts.
Download or read book Experimental and Theoretical Studies Toward a Characterization of Conceivable Intermediates Involved in the Gas phase Oxidation of Methane by Bare FeO written by Helmut Schwarz and published by . This book was released on 1992 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Atomic Layer Deposition for Semiconductors written by Cheol Seong Hwang and published by Springer Science & Business Media. This book was released on 2013-10-18 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering thorough coverage of atomic layer deposition (ALD), this book moves from basic chemistry of ALD and modeling of processes to examine ALD in memory, logic devices and machines. Reviews history, operating principles and ALD processes for each device.
Download or read book Transition Metal Dinitrogen Complexes written by Yoshiaki Nishibayashi and published by John Wiley & Sons. This book was released on 2019-05-06 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive book that explores nitrogen fixation by using transition metal-dinitrogen complexes Nitrogen fixation is one of the most prominent fields of research in chemistry. This book puts the focus on the development of catalytic ammonia formation from nitrogen gas under ambient reaction conditions that has been recently repowered by some research groups. With contributions from noted experts in the field, Transition Metal-Dinitrogen Complexes offers an important guide and comprehensive resource to the most recent research and developments on the topic of nitrogen fixation by using transition metal-dinitrogen. The book is filled with the information needed to understand the synthesis of transition metal-dinitrogen complexes and their reactivity. This important book: -Offers a resource for understanding nitrogen fixation chemistry that is essential for explosives, pharmaceuticals, dyes, and all forms of life -Includes the information needed for anyone interested in the field of nitrogen fixation by using transition metal-dinitrogen complexes -Contains state-of-the-art research on synthesis of transition metal-dinitrogen complexes and their reactivity in nitrogen fixation -Incorporates contributions from well-known specialists and experts with an editor who is an innovator in the field of dinitrogen chemistry Written for chemists and scientists with an interest in nitrogen fixation, Transition Metal-Dinitrogen Complexes is a must-have resource to the burgeoning field of nitrogen fixation by using transition metal-dinitrogen complexes.
Download or read book Clusters and Nanomaterials written by Y. Kawazoe and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthesizing specific clusters as a component of useful nanostructures or controlling them as an assembly of nanocomposites is the ultimate aim. In order to understand how to synthesize individual clusters or to investigate its properties, a variety of first-principles and empirical calculations and related computer simulations have been performed alongside numerous experiments.
Download or read book Alternative Catalytic Materials written by Justin S J Hargreaves and published by Royal Society of Chemistry. This book was released on 2018-07-11 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many important industrial chemical processes rely heavily on catalysis and so researchers are always on the lookout for alternative catalytic materials that may improve existing processes or lead to new ones. Families of alternative catalytic materials currently being investigated include the carbides, nitrides and phosphides as well as amorphous boron catalysts. The addition of carbon, nitrogen or phosphorous to transition metals and the creation of boron-transition metal alloys leads to catalytic materials that have interesting properties, with applications in a range of different reactions, including electrocatalysis. This book provides a comprehensive account of the preparation, characterisation and application of these catalytic materials. It is an important reference for researchers and industrialists working in heterogeneous catalysis and materials chemistry.
Download or read book Differential Scanning Calorimetry written by G.W.H. Höhne and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Differential Scanning Calorimetry (DSC) is a well established measuring method which is used on a large scale in different areas of research, development, and quality inspection and testing. Over a large temperature range, thermal effects can be quickly identified and the relevant temperature and the characteristic caloric values determined using substance quantities in the mg range. Measurement values obtained by DSC allow heat capacity, heat of transition, kinetic data, purity and glass transition to be determined. DSC curves serve to identify substances, to set up phase diagrams and to determine degrees of crystallinity. This book provides, for the first time, an overall description of the most impor tant applications of Differential Scanning Calorimetry. Prerequisites for reliable measurement results, optimum evaluation of the measurement curves and esti mation of the uncertainties of measurement are, however, the knowledge of the theoretical bases of DSC, a precise calibration of the calorimeter and the correct analysis of the measurement curve. The largest part of this book deals with these basic aspects: The theory of DSC is discussed for both heat flux and power compensated instruments; temperature calibration and caloric calibration are described on the basis of thermodynamic principles. Desmearing of the measurement curve in different ways is presented as a method for evaluating the curves of fast transitions.
Download or read book Science and Technology of High Pressure written by Murli H. Manghnani and published by Universities Press. This book was released on 2000 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: These books presents a wide spectrum of research and development activities in the field of High Pressure Science and Technology. These book provide comprehensive and interdisciplinary descriptions of recent research accomplishments in the biological, chemical, Earth, materrals, physical, physiological and related sciences.
Download or read book Tungsten written by Erik Lassner and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Why does someone write a book about Tungsten? There are several reasons and precedents for this, the most important of which is that the last book on tungsten was written more than 20 years ago, in 1977, by St. W H. Yih and Ch T. Wang. During the intervening period there have been many new scientific and technological developments and innova tions, so it was not only our opinion but the view of many other members of the "tungsten family" that it was time to start writing a new book about tungsten. Preparations of the new book began in 1994. further impetus to the project was provided by the realization that in spite of this new knowledge having been presented at seminars or published in the technical press, a general acknowledgement of it by the majority of technicians and scientists is still far from being realized. It is our hope that this book will significantly contribute to a broader acceptance of recent scientific and technological innovations. An important prerequisite for such a project is the availability of a recently retired, experienced person willing to devote his time and talents to the tedious part of the exercise.
Download or read book Introduction to Industrial Polypropylene written by Dennis B. Malpass and published by John Wiley & Sons. This book was released on 2012-07-02 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introductory text is an important resource for new engineers, chemists, students, and chemical industry personnel to understand the technical aspects of polypropylene which is the 2nd largest synthetics polymer in manufactured output. The book considers the following topics: What are the principal types of polypropylene and how do they differ? What catalysts are used to produce polypropylene and how do they function? What is the role of cocatalysts and how have they evolved over the years? How are industrial polypropylene catalysts tested and the resultant polymer evaluated? What processes are used in the manufacture of polypropylene? What are the biopolymer alternatives to polypropylene? What companies are the major industrial manufacturers of polypropylene? What is the environmental fate of polypropylene?
Download or read book Ultra High Temperature Materials II written by Igor L. Shabalin and published by Springer. This book was released on 2019-04-24 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: This exhaustive work in three volumes and over 1300 pages provides a thorough treatment of ultra-high temperature materials with melting points over 2500 °C. The first volume focuses on Carbon and Refractory Metals, whilst the second and third are dedicated solely to Refractory compounds and the third to Refractory Alloys and Composites respectively. Topics included are physical (crystallographic, thermodynamic, thermo physical, electrical, optical, physico-mechanical, nuclear) and chemical (solid-state diffusion, interaction with chemical elements and compounds, interaction with gases, vapours and aqueous solutions) properties of the individual physico-chemical phases of carbon (graphite/graphene), refractory metals (W, Re, Os, Ta, Mo, Nb, Ir) and compounds (oxides, nitrides, carbides, borides, silicides) with melting points in this range. It will be of interest to researchers, engineers, postgraduate, graduate and undergraduate students alike. The reader is provided with the full qualitative and quantitative assessment for the materials, which could be applied in various engineering devices and environmental conditions at ultra-high temperatures, on the basis of the latest updates in the field of physics, chemistry, materials science and engineering.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1996 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Good Agricultural Practices for Greenhouse Vegetable Crops written by and published by Food & Agriculture Organization of the UN (FAO). This book was released on 2013 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication capitalizes on the experience of scientists from the North Africa and Near East countries, in collaboration with experts from around the world, specialized in the different aspects of greenhouse crop production. It provides a comprehensive description and assessment of the greenhouse production practices in use in Mediterranean climate areas that have helped diversify vegetable production and increase productivity. The publication is also meant to be used as a reference and tool for trainers and growers as well as other actors in the greenhouse vegetables value chain in this region.
Download or read book Publications of the National Bureau of Standards 1966 1967 written by United States. National Bureau of Standards and published by . This book was released on 1969 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Intercalated Layered Materials written by F.A. Lévy and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials with layered structures remain an extensively investigated subject in current physics and chemistry. Most of the promising technological applications however deal with intercalation compounds of layered materials. Graphite intercalation compounds have now been known for a long time. Intercalation in transition metal dichalcogenides, on the other hand, has been investigated only recently. The amount of information on intercalated layered materials has increased far beyond the original concept for this volume in the series Physics and Chemistry of Materials with Layered Structures. The large size of this volume also indicates how important this field of research will be, not only in basic science, but also in industrial and energy applications. In this volume, two classes of materials are included, generally investigated by different scientists. Graphite intercalates and intercalates of other inorganic com pounds actually constitute separate classes of materials. However, the similarity between the intercalation techniques and some intercalation processes does not justify this separation, and accounts for the inclusion of both classes in this volume. The first part of the volume deals with intercalation processes and intercalates of transition metal dichalcogenides. Several chapters include connected topics necessary to give a good introduction or comprehensive review of these types of materials. Organic as well as inorganic intercalation compounds are treated. The second part includes contributions concerning graphite intercalates. It should be noted that graphite intercalation compounds have already been mentioned in Volumes I and V.
