Download or read book Experimental and Theoretical Results for Buckling of Eccentrically Stiffened Cylinders written by Michael F. Card and published by . This book was released on 1966 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theoretical and Experimental Results on the Post buckling of Ring stiffened Cylinders written by S. S. Seleim and published by . This book was released on 1985 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Buckling of Stiffened Cylinders in Axial Compression and Bending written by James P. Peterson and published by . This book was released on 1969 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: Buckling data review for stiffened cylinder failures during axial compression and bending.
Download or read book Buckling Experiments Experimental Methods in Buckling of Thin Walled Structures Volume 2 written by Josef Singer and published by John Wiley & Sons. This book was released on 2002-08-12 with total page 1140 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Edited by Josef Singer, the world's foremost authority on structural buckling. * Time-saving and cost-effective design data for all structural, mechanical, and aerospace engineering researchers.
Download or read book Preliminary Results of Compression Tests on Cylinders with Eccentric Longitudinal Stiffeners written by Michael F. Card and published by . This book was released on 1964 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Critical Stress of Ring stiffened Cylinders in Torsion written by Manuel Stein and published by . This book was released on 1949 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: A nondimensional chart is presented for the theoretical critical stress in torsion of simply supported cylinders stiffened by identical, equally spaced, torsionally weak rings. The results are obtained by solving the equation of equilibrium by means of the Galerkin method. Comparison of the theoretical results wit hthe experimental results indicates that ring-stiffened cylinders buckle on the average, at a buckling stress about 15 percent below the theoretical buckling stress presented.
Download or read book NASA Technical Note written by and published by . This book was released on 1969 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Buckling of Eccentrically Stiffened Orthotropic Cylinders written by David L. Block and published by . This book was released on 1965 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: A small-deflection theory for buckling of stiffened orthotropic cylinders which includes eccentricity (one-sided) effects in the stiffeners is derived from energy principles. Buckling solutions corresponding to classical simple- support boundary conditions are obtained for both orthotropic and isotropic stiffened cylinders subjected to any combination of axial and circumferential loading. Comparable solutions for stiffened flat plates are also given. Sample calculations of predicted compressive buckling loads obtained from the solutions are compared with existing solutions for ring-stiffened corrugated cylinders, ring-and-stringer-stiffened cylinders, and longitudinally (stringer) stiffened cylinders. The calculations demonstrate that eccentricity effects are large even with very large diameter cylinders of practical proportions and should be accounted for in any buckling analysis.
Download or read book General Instability of Orthotropically Stiffened Cylinders written by C. Lakshmikantham and published by . This book was released on 1965 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: As part of a general program to determine the applicability of linear orthotropic theory to the design of cylindrical shells under various loading conditions, a theoretical and experimental investigation was performed on the general instability of orthotropic cylinders under bending and combined axial compression and bending loading. Based on a simple approximation for the asymmetric buckling pattern, theoretical results suitable for design use were obtained for the buckling of orthotropic cylinders for both bending and combined loading conditions. It was shown that the buckling stress for orthotropic cylinders under bending or axial compression loading are equal which agrees with previous results for isotropic cylinders. Theoretical results were evaluated by means of a series of careful experiments performed on orthotropically stiffened cylinders designed to fail in the elastic general instability mode. For both bending loading and the combined axial and bending loading condition, experimental results were in good agreement with the theory.
Download or read book Plastic Buckling of Axially Compressed Eccentrically Stiffened Cylinders written by Robert M. Jones and published by . This book was released on 1967 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1972 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computerized buckling analysis of shells written by D. Bushnell and published by Springer Science & Business Media. This book was released on 1985-09-30 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report describes the work performed by Lockheed Palo Alto Research Labora tory, Palo Alto, California 94304. The work was sponsored by Air Force Office of Scientific Research, Bolling AFB, Washington, D. C. under Grant F49620-77-C-0l22 and by the Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Wright-Patterson AFB, Ohio under Contract F3361S-76-C-31OS. The work was completed under Task 2307Nl, "Basic Research in Behavior of Metallic and Composite Components of Airframe Structures". The work was admini stered by Lt. Col. J. D. Morgan (AFOSR) and Dr. N. S. Khot (AFWAL/FIBRA). The contract work was performed between October 1977 and December 1980. The technical report was released by the Author in December 1981. Preface Many structures are assembled from parts which are thin. For example, a stiffened plate or cylindrical panel is composed of a sheet the thickness of which is small com pared to its length, breadth, and stiffener- spacing, and stiffeners the thickness of which is small compared to their _ heights and lengths. These assembled structures, loaded in compression, can buckle overall, that is sheet and stiffeners can collapse together in a general instability mode; the sheet can buckle locally between stiffeners; the stiffeners can cripple; and a variety of complex buckling interactions can occur involving local and overall deformations of both sheet and stiffeners. More complex, built-up structures can buckle in more complex and subtle ways.
Download or read book Computerized Buckling Analysis of Shells written by David Bushnell and published by . This book was released on 1981 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bending and Compression Tests of Pressurized Ring stiffened Cylinders written by Marvin B. Dow and published by . This book was released on 1960 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Scientific and Technical Reports written by United States. National Aeronautics and Space Administration Scientific and Technical Information Division and published by . This book was released on 1967 with total page 2300 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Experimental and Theorical Results for Buckling of Eccentrically Stiffended Cylinders written by Michael F. Card and published by . This book was released on 1966 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monthly Catalog of United States Government Publications written by United States. Superintendent of Documents and published by . This book was released on 1966 with total page 1464 pages. Available in PDF, EPUB and Kindle. Book excerpt:
