Download or read book Mechanics of Fibrous Materials and Applications written by Catalin Picu and published by Springer. This book was released on 2019-07-31 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book explores the state of the art in the mechanics of fibrous media, providing an overview of the theoretical, modelling and practical aspects of designing and working with these materials. It also describes the advanced methods needed to handle their specific features, including the mechanics of generalized continua, dedicated homogenization methods and computational techniques, and presents applications of fibrous media to diverse fields and over a broad spectrum of scales, ranging from aeronautics to biomechanics.

Download or read book Women in Science Materials written by Maria Chiara Bignozzi and published by Frontiers Media SA. This book was released on 2021-07-01 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Frontiers in Materials Editorial Office team are delighted to present the inaugural “Women in Science: Materials” article collection, showcasing the high-quality work of women in science across the breadth of materials science and engineering. All researchers featured within this collection were individually nominated by the Topic Editors in recognition of their status as leading academics who have great potential to influence the future directions of their respective fields. The work presented here highlights the diversity of research performed across the entire breadth of the materials science and engineering field and presents advances in theory, experimentation, and methodology with applications for solving compelling problems. This Editorial features the corresponding author(s) of each paper published within this important collection, ordered by section alphabetically, highlighting them as the great researchers of the future. The Frontiers in Materials Editorial Office team would like to thank each researcher who contributed their work to this collection. We would also like to personally thank the Topic Editors for their exemplary leadership of this article collection; their strong support and passion for this important, community-driven collection has ensured its success and global impact. Emily Young Journal Development Manager

Download or read book Bending Behavior of Thermoplastic Composite Sheets written by Steffen Ropers and published by Springer. This book was released on 2017-03-07 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within the scope of this work, Steffen Ropers evaluates the viscoelastic and temperature-dependent nature of the bending behavior of thermoplastic composite sheets in order to further enhance the predictability of the draping simulation. This simulation is a useful tool for the development of robust large scale processes for continuously fiber-reinforced polymers (CFRP). The bending behavior thereby largely influences the size and position of wrinkles, which are one of the most common processing defects for continuously fiber-reinforced parts. Thus, a better understanding of the bending behavior of thermoplastic composite sheets as well as an appropriate testing method along with corresponding material models contribute to a wide-spread application of CFRPs in large scale production.

Download or read book Advances in Composites Manufacturing and Process Design written by Philippe Boisse and published by Woodhead Publishing. This book was released on 2015-07-29 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manufacturing processes of composite materials are numerous and often complex. Continuous research into the subject area has made it hugely relevant with new advances enriching our understanding and helping us overcome design and manufacturing challenges. Advances in Composites Manufacturing and Process Design provides comprehensive coverage of all processing techniques in the field with a strong emphasis on recent advances, modeling and simulation of the design process. Part One reviews the advances in composite manufacturing processes and includes detailed coverage of braiding, knitting, weaving, fibre placement, draping, machining and drilling, and 3D composite processes. There are also highly informative chapters on thermoplastic and ceramic composite manufacturing processes, and repairing composites. The mechanical behaviour of reinforcements and the numerical simulation of composite manufacturing processes are examined in Part Two. Chapters examine the properties and behaviour of textile reinforcements and resins. The final chapters of the book investigate finite element analysis of composite forming, numerical simulation of flow processes, pultrusion processes and modeling of chemical vapour infiltration processes. - Outlines the advances in the different methods of composite manufacturing processes - Provides extensive information on the thermo-mechanical behavior of reinforcements and composite prepregs - Reviews numerical simulations of forming and flow processes, as well as pultrusion processes and modeling chemical vapor infiltration

Download or read book Process simulation of wet compression moulding for continuous fibre reinforced polymers written by Poppe, Christian Timo and published by KIT Scientific Publishing. This book was released on 2022-07-18 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interdisciplinary development approaches for system-efficient lightweight design unite a comprehensive understanding of materials, processes and methods. This applies particularly to continuous fibre-reinforced plastics (CoFRPs), which offer high weight-specific material properties and enable load path-optimised designs. This thesis is dedicated to understanding and modelling Wet Compression Moulding (WCM) to facilitate large-volume production of CoFRP structural components.

Download or read book Design and Manufacture of Structural Composites written by Lee Harper and published by Woodhead Publishing. This book was released on 2022-11-30 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Manufacture of Structural Composites provides an overview of the main manufacturing challenges encountered when processing fibre-reinforced composite materials. Composites are unique in that the material is created at the same time as the structure, forming a very close link between the constituents, the manufacturing process and the resulting mechanical performance. This book takes an in-depth look at material choices and the intermediate steps required to convert different fibre and matrix combinations into finished products. It provides an insight into recent developments for each of the manufacturing processes covered, addressing design, cost, rate and mechanical performance. Topics covered include an introduction to composite materials, material preforming and conversion, moulding, digital design and sustainability, which addresses waste reduction, disassembly and fibre recovery. This book has been developed primarily as a teaching resource with contributions from leading experts in the field. The content has evolved from courses given by the authors to mechanical engineering and materials science students, at both undergraduate and postgraduate levels. It also draws upon experience gained during research projects and from leading industry experts. It therefore provides non-specialists with a valuable introduction to composite manufacturing techniques, helping to determine the most suitable manufacturing routes and to understand the challenges associated with the production of high-performance composite components. - Provides an overview of the most common manufacturing routes for fibre reinforced composites, including the influence of the manufacturing route on mechanical properties, production volume and component cost - Discusses recent advances in composite manufacturing, including the use of automation, process simulation, digital factories, and solutions to improve sustainability - Looks at where the composites sector is heading and discusses some of the challenges faced by end-users looking to scale up production and increase the uptake of fibre-reinforced composites for structural applications

Download or read book Non Crimp Fabric Composites written by Stepan V Lomov and published by Elsevier. This book was released on 2011-04-19 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-crimp fabric (NCF) composites are reinforced with mats of straight (non-crimped) fibres, giving them such advantages as strength, ease of handling and low manufacturing costs. Non-crimp fabric composites provides a comprehensive review of the use of NCF composites, their manufacture and applications in engineering.Part one covers the manufacture of non-crimp fabrics, including also topics such as structural stitching and automated defect analysis. Part two goes on to discuss the manufacture of non-crimp fabric composites, with chapters covering such topics as deformability and permeability of NCF. Part three focuses on the properties of NCF composites, with chapters on stiffness and strength, damage progression and fatigue. Finally, part four covers the applications of NCF composites, including chapters on the aerospace and automotive industries as well as wind turbines and helicopter applications. The book concludes with a discussion of cost analysis of NCF composites in engineering applications.With its distinguished editor and international team of expert contributors, Non-crimp fabric composites is an essential reference for composite manufacturers and structural and mechanical engineers in industries using NCF composites, as well as academics with a research interest in the field. - Provides a comprehensive review of the use of NCF composites, their manufacture and applications in engineering - Reviews the manufacture of non-crimp fabrics, including also topics such as structural stitching and automated defect analysis - Examines the properties of NCF composites considering stiffness and strength, damage progression and fatigue

Download or read book Advances in Production Research written by Robert Schmitt and published by Springer. This book was released on 2018-11-19 with total page 791 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this volume present recent and highly relevant topics in the fields of production research as 3D printing, additive manufacturing processes, agile product development, change dynamics in companies, configurable material systems, data analysis in process optimization, future technologies with high potential in value creation, global production, learning production systems, production of the future, organization of assemblies, resource efficiency in production, robotics in assembly, and technology trends in machine tools. Researchers and practitioners in the field of mechanical engineering and production technology will benefit from this content.

Download or read book Composites Forming Technologies written by A C Long and published by Elsevier. This book was released on 2014-01-23 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composites are versatile engineered materials composed of two or more constituent materials which, when combined, lead to improved properties over the individual components whilst remaining separate on a macroscopic level. Due to their versatility, composite materials are used in a variety of areas ranging from healthcare and civil engineering to spacecraft technology. Composites forming technologies reviews the wealth of research in forming high-quality composite materials.The book begins with a concise explanation of the forming mechanisms and characterisation for composites, as well as covering modelling and analysis of forming techniques. Further chapters discuss the testing and simulation of composite materials forming. The book also considers forming technologies for various composite material forms including thermoset and thermoplastic prepreg, moulding compounds and composite/metal laminates.With its distinguished editor and array of international contributors, Composites forming technologies is an essential reference for engineers, researchers and academics involved with the production and use of composite materials. - Reviews the wealth of research in forming high-quality composite materials - Includes a concise explanation of the forming mechanisms and charaterisation for composites - Considers forming technologies for various composite material forms

Download or read book Composite Sheet Forming written by D. Bhattacharyya and published by Elsevier. This book was released on 1997-06-18 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sheet forming is the most common process used in metal forming and is therefore constantly being adapted or modified to suit the needs of forming composite sheets. Due to the increasing availability of various types of fibre reinforced polymeric sheets, especially with thermoplastic matrices, the scope of use of such materials is rapidly expanding in the automobile, building, sports and other manufacturing industries beyond the traditional areas of aerospace and aircraft applications. This book contains twelve chapters and attempts to cover different aspects of sheet forming including both thermoplastic and thermosetting materials. In view of the expanded role of fibre reinforced composite sheets in the industry, the book also describes some non-traditional applications, processes and analytical techniques involving such materials.The first chapter is a brief introduction to the principles of sheet metal forming. The next two chapters introduce the various forms of materials, manufacturing techniques and the fundamentals of computer simulation. Chapter 4 describes the different aspects of thermoforming of continuous fibre reinforced thermoplastics and the following chapter studies the shear and frictional behaviour of composite sheets during forming. Chapter 6 explores the possibility of applying the grid strain analysis method in continuous fibre reinforced polymeric sheets. The next two chapters address fundamental concepts and recent developments in finite element modelling and rheology. Chapter 9 introduces the theory of bending of thermoplastic composite sheets and shows a novel way of determining both longitudinal and transverse viscosities through vee-bend tests. A significant expansion in the usage of composite materials is taking place in biomedical areas. Chapter 10 discusses the thermoforming of knitted fabric reinforced thermoplastics for load bearing and anisotropic bio-implants. The final chapter introduces roll forming, a commonly used rapid manufacturing process for sheet metals, and discusses the possibility of applying it economically for continuous reinforced thermoplastic sheets.

Download or read book Composite Reinforcements for Optimum Performance written by Philippe Boisse and published by Woodhead Publishing. This book was released on 2020-11-04 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite Reinforcements for Optimum Performance, Second Edition, has been brought fully up to date with the latest developments in the field. It reviews the materials, properties and modelling techniques used in composite production and highlights their uses in optimizing performance. Part I covers materials for reinforcements in composites, including chapters on fibers, carbon nanotubes and ceramics as reinforcement materials. In Part II, different types of structures for reinforcements are discussed, with chapters covering woven and braided reinforcements, three-dimensional fibre structures and two methods of modelling the geometry of textile reinforcements: WiseTex and TexGen. Part III focuses on the properties of composite reinforcements, with chapters on topics such as in-plane shear properties, transverse compression, bending and permeability properties. Finally, Part IV covers the characterization and modelling of reinforcements in composites, with chapters focusing on microscopic and mesoscopic approaches, X-ray tomography analysis and modelling reinforcement forming processes. With its distinguished editor and international team of contributors, Composite Reinforcements for Optimum Performance, Second Edition, is an essential reference for designers and engineers working in the composite and composite reinforcement manufacturing industry, as well as all those with an academic research interest in the subject. Discusses the characterization and modeling of reinforcements in composites, focusing on such topics as microscopic and mesoscopic approaches, X-ray tomography analysis, and modeling reinforcement forming processes Provides comprehensive coverage of the types and properties of reinforcement in composites, along with their production and performance optimization Includes sections on NCF (non-crimp fabrics), natural fiber reinforcements, tufting composite reinforcements, sustainability, multiscale modeling, knitted reinforcements, and more

Download or read book Polypropylene Handbook written by József Karger-Kocsis and published by Springer. This book was released on 2019-03-18 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book extensively reviews Polypropylene (PP), the second most widely produced thermoplastic material, having been produced for over 60 years. Its synthesis, processing and application are still accompanied by vigorous R&D developments because the properties of PP are at the borderline between those of commodity and engineering thermoplastics. Readers are introduced to various tacticities and polymorphs of PP, and their effects on structural properties. Further, the book addresses the control of optical properties using nucleants, provides strategies for overcoming the limited cold/impact resistance of PP, examines in detail the effects of recycling, and presents guidelines for the property modification of PPs through foaming, filling and reinforcing with respect to target applications. Special attention is paid to descriptions and models of properties as a function of morphological variables. Last but not least, the book suggests potential practical applications of PP-based systems, especially in the packaging, appliances, building/construction, textile and automotive sectors. Each chapter, written by internationally respected scientists, reflects the current state-of-art in the respective field and offers a vital source of information for students, researchers and engineers interested in the morphology, properties, testing and modeling of PP and PP-based systems. The content is indispensable to the appropriate application of PPs and related composites.

Download or read book Advanced Structural Textile Composites Forming written by Peng Wang and published by Elsevier. This book was released on 2024-08-27 with total page 667 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Structural Textile Composites Forming: Characterization, Modeling, and Simulation comprehensively describes the influence of fiber/fabric architectures and properties on composites forming, along with their deformability and structural optimization, covering the latest advances in the composites forming field. Part one reviews textile reinforcement architectures and discusses the forming behaviors of important 2D and 3D fabrics. Part two discusses numerical models to conduct simulation analysis of different structural composites forming at mesoscopic and macroscopic scales, in particular, 3D preforms with through-the-thickness yarns. Part three looks at the latest developments in the relationship between forming and other steps in composite manufacturing, such as resin injection, and automated fiber placement (AFP) and the effects on certain mechanical properties, such as structural damage and impact resistance. The book will be an essential reference for academic researchers, industrial engineers and materials scientists working with the manufacture and design of fiber-reinforced composite materials. - Describes the influence of the fiber/fabric architectures and properties on composites forming, along with their deformability and structural optimization - Provides numerical modeling and simulation of different fiber-reinforced composites forming at mesoscopic and macroscopic scales, in particular, reinforcements with discontinue fibers, and 3D preforms with through-the-thickness yarns - Discusses cutting edge topics such as resin injection, and automated fiber placement (AFP) and the effects of forming results on mechanical properties such as structural damage and impact resistances

Download or read book Textile Based Advanced Materials written by Thomas Bechtold and published by MDPI. This book was released on 2021-03-17 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in the science and technology of textiles are not only limited to apparel and fashion. Certainly, there are research efforts aimed at improving the construction and processing of textiles for clothing—such as studies on cleaner production to reduce environmental impact, increasing the utilization of fibers and process chemicals from renewable resources, and on the recycling of materials from post-consumer waste apparel back into the manufacturing of new clothing articles. In addition, technological concepts developed for the creation of clothing over the centuries are now being investigated for use in a diverse array of fields—such as in the manufacture of engineering composites, personal protective equipment, and medicine. Further, developments in other fields—such as electronics, nanotechnology, and information and communication technologies—are being investigated for their incorporation into apparel and clothing to create “smart textiles”. The aim of this Special Issue is to put together a collection of scientific reports on such efforts to highlight the range of scientific and technological issues that are being targeted and the ingenuity of the methodologies employed to find answers. It is hoped that readers of this issue will come away with an appreciation of the research being conducted in this area, and perhaps gain inspiration for their own scientific endeavors.

Download or read book Impact Behaviour of Fibre Reinforced Composite Materials and Structures written by S. R. Reid and published by Elsevier. This book was released on 2000-10-12 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study covers impact response, damage tolerance and failure of fibre-reinforced composite materials and structures. Materials development, analysis and prediction of structural behaviour and cost-effective design all have a bearing on the impact response of composites and this book brings together for the first time the most comprehensive and up-to-date research work from leading international experts. - State of the art analysis of impact response, damage tolerance and failure of FRC materials - Distinguished contributors provide expert analysis of the most recent materials and structures - Valuable tool for R&D engineers, materials scientists and designers

Download or read book Heat Transfer in Polymer Composite Materials written by Nicolas Boyard and published by John Wiley & Sons. This book was released on 2016-03-28 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses general information, good practices and examples about thermo-physical properties, thermo-kinetic and thermo-mechanical couplings, instrumentation in thermal science, thermal optimization and infrared radiation.

Download or read book Manufacturing Techniques for Polymer Matrix Composites PMCs written by Suresh G Advani and published by Elsevier. This book was released on 2012-07-18 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer matrix composites are used extensively across a wide range of industries, making the design and development of effective manufacturing processes of great importance. Manufacturing techniques for polymer matrix composites (PMCs) provides an authoritative review of the different technologies employed in the manufacture of this class of composite.Following an introduction to composites and manufacturing processes, part one reviews the manufacturing of short fiber and nanoparticle based polymer matrix composites, with injection and compression molding examined in depth. Thermoplastic processing is the focus of part two. Sheet forming, fabric thermostamping, filament winding and continuous fiber reinforced profiles are investigated. Part three reviews thermoset processing. A survey of resin transfer molding follows, including vacuum-assisted and compression resin transfer molding. The pultrusion process is then considered, before the book concludes with an investigation into autoclave and out-of-autoclave curing processes in polymer matrix composites.With its distinguished editors and international team of expert contributors, Manufacturing techniques for polymer matrix composites (PMCs) is an essential guide for engineers and scientists working in the field of polymer matrix composites. - Provides an authoritative review of the different technologies employed in the manufacture of polymer matrix composites - Reviews the manufacturing of short fiber and nanoparticle-based polymer matrix composites, with injection and compression molding examined in depth - Examines thermoplastic processing, sheet forming, fabric thermostamping, filament winding and continuous fiber reinforced profiles