Download or read book Reactor Dosimetry written by David W. Vehar and published by ASTM International. This book was released on 2008 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The latest edition of this popular ASTM series provides an extensive overview of the latest advances in reactor dosimetry. As operating nuclear power reactors have aged and continue to operate on extended operating licenses, new pressure vessel surveillance techniques have been required. Eastern European pressurized water reactors, especially those of the VVER-440 type, continue to have greater concerns about steel embrittlement, because of higher neutron radiation exposures than most Western European and US reactors. Accordingly, broader dosimetry studies are being made on the VVER reactors through retrospective dosimetry, ex-vessel dosimetry, and careful re-analysis of previously reported data."--Publisher's website.
Download or read book Experimental and Calculation Investigations of the Space Energy Neutron and Photon Distribution in the Vicinity of Reactor Pressure Vessel and Surveillance Specimen Box of New Type in the WWER 1000 Mock Up written by B. Ošmera and published by . This book was released on 2006 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: The radiation field parameters in the vicinity of new type of WWER-1000 surveillance specimens boxes and in RPV simulator have been investigated in the WWER-1000 Mock-up in the reactor LR-0. The neutron and photon spectra have been measured with stilbene cylindrical crystals in the energy range approximately from 0.5 MeV to 10 MeV. The experimental values of integral neutron field parameters (attenuations of integral neutron flux densities between different points of mock-up as well as the spectral indices, i.e., ratios of integral neutron flux densities with different thresholds) were obtained also. The mock-up (LR-0 reactor) power monitoring during measurements was carried out with two fission chambers, one fixed, one moveable axially, so that four orders in power were covered. The experimental data (spectra, attenuation factors, and spectral indices) have been compared with the calculation results. The sensitivity to parameters of calculation model and method was evaluated also.
Download or read book Radiological Characterization of Shut Down Nuclear Reactors for Decommissioning Purposes written by International Atomic Energy Agency and published by . This book was released on 1998 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report describes and assesses radiological characterization as a precursor to decommissioning. It shows the influence of the radioactive inventory on the planning and strategies of decommissioning and also presents an extensive overview of characterization results on various reactors which have been or are being decommissioned.
Download or read book Determination of Absorbed Dose in Reactors written by and published by . This book was released on 1971 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Decommissioning Techniques for Research Reactors written by International Atomic Energy Agency and published by . This book was released on 1994 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first report published by the IAEA which provides guidance on the preparation and implementation of the decommissioning of different types of research reactor. Different construction and operational features of research reactors have a major impact on the decommissioning techniques required. This report offers information on the conclusions drawn from a number of completed projects and identifies their similarities and differences. It is complemented by a computerized research reactor databank. Staff requirements, decommissioning costs waste activity are presented graphically according to reactor thermal power and integrated energy.
Download or read book Sources Effects and Risks of Ionizing Radiation United Nations Scientific Committee on the Effects of Atomic Radiation UNSCEAR 2016 Report written by United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR) and published by United Nations. This book was released on 2017-04-25 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report assesses the levels and effects of exposure to ionizing radiation. Scientific findings underpin radiation risk evaluation and international protection standards. This report comprises a report with two underpinning scientific annexes. The first annex recapitulates and clarifies the philosophy of science as well as the scientific knowledge for attributing observed health effects in individuals and populations to radiation exposure, and distinguishes between that and inferring risk to individuals and populations from an exposure. The second annex reviews the latest thinking and approaches to quantifying the uncertainties in assessments of risk from radiation exposure, and illustrates these approaches with application to examples that are highly pertinent to radiation protection.
Download or read book Fundamentals of Radiation Materials Science written by GARY S. WAS and published by Springer. This book was released on 2016-07-08 with total page 1014 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revised second edition of this established text offers readers a significantly expanded introduction to the effects of radiation on metals and alloys. It describes the various processes that occur when energetic particles strike a solid, inducing changes to the physical and mechanical properties of the material. Specifically it covers particle interaction with the metals and alloys used in nuclear reactor cores and hence subject to intense radiation fields. It describes the basics of particle-atom interaction for a range of particle types, the amount and spatial extent of the resulting radiation damage, the physical effects of irradiation and the changes in mechanical behavior of irradiated metals and alloys. Updated throughout, some major enhancements for the new edition include improved treatment of low- and intermediate-energy elastic collisions and stopping power, expanded sections on molecular dynamics and kinetic Monte Carlo methodologies describing collision cascade evolution, new treatment of the multi-frequency model of diffusion, numerous examples of RIS in austenitic and ferritic-martensitic alloys, expanded treatment of in-cascade defect clustering, cluster evolution, and cluster mobility, new discussion of void behavior near grain boundaries, a new section on ion beam assisted deposition, and reorganization of hardening, creep and fracture of irradiated materials (Chaps 12-14) to provide a smoother and more integrated transition between the topics. The book also contains two new chapters. Chapter 15 focuses on the fundamentals of corrosion and stress corrosion cracking, covering forms of corrosion, corrosion thermodynamics, corrosion kinetics, polarization theory, passivity, crevice corrosion, and stress corrosion cracking. Chapter 16 extends this treatment and considers the effects of irradiation on corrosion and environmentally assisted corrosion, including the effects of irradiation on water chemistry and the mechanisms of irradiation-induced stress corrosion cracking. The book maintains the previous style, concepts are developed systematically and quantitatively, supported by worked examples, references for further reading and end-of-chapter problem sets. Aimed primarily at students of materials sciences and nuclear engineering, the book will also provide a valuable resource for academic and industrial research professionals. Reviews of the first edition: "...nomenclature, problems and separate bibliography at the end of each chapter allow to the reader to reach a straightforward understanding of the subject, part by part. ... this book is very pleasant to read, well documented and can be seen as a very good introduction to the effects of irradiation on matter, or as a good references compilation for experimented readers." - Pauly Nicolas, Physicalia Magazine, Vol. 30 (1), 2008 “The text provides enough fundamental material to explain the science and theory behind radiation effects in solids, but is also written at a high enough level to be useful for professional scientists. Its organization suits a graduate level materials or nuclear science course... the text was written by a noted expert and active researcher in the field of radiation effects in metals, the selection and organization of the material is excellent... may well become a necessary reference for graduate students and researchers in radiation materials science.” - L.M. Dougherty, 07/11/2008, JOM, the Member Journal of The Minerals, Metals and Materials Society.
Download or read book The New Nuclear Forensics written by Vitaly Fedchenko and published by Oxford University Press. This book was released on 2015 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear material changes its form and properties as it moves through the nuclear fuel cycle, from one facility to another. Each step of the fuel cycle or each use of the material will inevitably leave its mark. The science of determining the history of a sample of nuclear material through the study of these characteristics is known as nuclear forensics. While nuclear forensic analysis has normally been associated with investigations and prosecutions in the contextof trafficking of nuclear materials or nuclear terrorism, it had wider applications in in national security contexts, such as nuclear non-proliferation, disarmament, and arms control. The New Nuclear Forensics is the first book to give a definitive guide to this broader definition of nuclear forensic analysis. This book describes the various methods used in nuclear forensics, giving first a broad introduction to the process followed by details of relevant measurement techniques and procedures. In each case, the advantages and limitations are outlined. To put these methods in context, the book also recounts the history of the discipline anddescribes the diverse contemporary applications of nuclear forensics.
Download or read book 14 MeV Neutrons written by Vladivoj Valkovic and published by CRC Press. This book was released on 2015-08-25 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the often difficult and time-consuming effort of performing experiments with fast (14 MeV) neutrons, these neutrons can offer special insight into nucleus and other materials because of the absence of charge. 14 MeV Neutrons: Physics and Applications explores fast neutrons in basic science and applications to problems in medicine, the envir
Download or read book Zirconium in the Nuclear Industry Tenth International Symposium written by A. M. Garde and published by ASTM International. This book was released on 1994 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Methods for the Minimization of Radioactive Waste from Decontamination and Decommissioning of Nuclear Facilities written by International Atomic Energy Agency and published by . This book was released on 2001 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simple text and photographs introduce the life of George Washington Carver.
Download or read book Challenges for Coolants in Fast Neutron Spectrum Systems written by International Atomic Energy Agency and published by . This book was released on 2020-07-30 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication evaluates the different coolant options considered for nuclear applications with a fast neutron spectrum (i.e. fusion, fission and accelerators), compiles the latest information in the field and identifies research needs.
Download or read book Neutron Physics written by Paul Reuss and published by . This book was released on 2008 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally just an offshoot of nuclear physics, neutron physics soon became a branch of physics in its own right. It deals with the movement of neutrons in nuclear reactors and all the nuclear reactions they trigger there, particularly the fission of heavy nuclei which starts a chain reaction to produce energy. Neutron Physics covers the whole range of knowledge of this complex science, discussing the basics of neutron physics and some principles of neutron physics calculations. Because neutron physics is the essential part of reactor physics, it is the main subject taught to students of Nuclear Engineering. This book takes an instructional approach for that purpose. Neutron Physics is also intended for all physicists and engineers involved in development or operational aspects of nuclear power.
Download or read book Calculation of the Neutron Source Distribution in the VENUS PWR Mockup Experiment written by and published by . This book was released on 1984 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The VENUS PWR Mockup Experiment is an important component of the Nuclear Regulatory Commission's program goal of benchmarking reactor pressure vessel (RPV) fluence calculations in order to determine the accuracy to which RPV fluence can be computed. Of particular concern in this experiment is the accuracy of the source calculation near the core-baffle interface, which is the important region for contributing to RPV fluence. Results indicate that the calculated neutron source distribution within the VENUS core agrees with the experimental measured values with an average error of less than 3%, except at the baffle corner, where the error is about 6%. Better agreement with the measured fission distribution was obtained with a detailed space-dependent cross-section weighting procedure for thermal cross sections near the core-baffle interface region. The maximum error introduced into the predicted RPV fluence due to source errors should be on the order of 5%.
Download or read book Calculation of the Neutron Source Distribution in the Venus PWR Engineering Mock up and Comparison with Experimental Measurements written by and published by . This book was released on 1984 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The VENUS experiment is sponsored by the USNRC in conjunction with CEN/SCK in Mol, Belgium. The VENUS configuration consists of a central water hole, surrounded by a 2.888 cm thick inner sheet baffle. The inner core zone in the immediate vicinity of the inner baffle contains 752 3.3% 235U, zircalloy fuel cells, with 48 pyrex rods interspersed among them. The outer core zone contains 1800 4.0% 235U, steel clad fuel cells. The core itself is surrounded by a 2.858 cm thick outer steel baffle, a water reflector, a 4.972 cm thick steel core barrel, a water gap, a neutron pad, and the pressure vessel. The primary aim of this study is to calculate the VENUS neutron source distribution, as part of the USNRC's overall program goal of benchmarking RPV fluence calculations. Of particular concern is the accuracy of the source calculation near the core-baffle interface, which is the important region for contributing to RPV fluence. The accuracy of the calculations is evaluated by comparison with gamma scan measurements performed by CEN/SCK.
