Download or read book ExHFT 8 written by and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Thermochemical Heat Storage System for Households written by Armand Fopah Lele and published by Springer. This book was released on 2016-07-09 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book offers a comprehensive report on the design and optimization of a thermochemical heat storage system for use in buildings. It combines theoretical and experimental work, with a special emphasis on model-based methods. It describes the numerical modeling of the heat exchanger, which allows recovery of about two thirds of the waste heat from both solar and thermal energy. The book also provides readers with a snapshot of current research on thermochemical storage systems, and an in-depth review of the most important concepts and methods in thermal management modeling. It represents a valuable resource for students, engineers and researchers interested in thermal energy storage processes, as well as for those dealing with modeling and 3D simulations in the field of energy and process engineering.
Download or read book Radiation Sensors with 3D Electrodes written by Cinzia Da Vià and published by CRC Press. This book was released on 2019-01-17 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading names in this field, this book introduces the technical properties, design and fabrication details, measurement results, and applications of three-dimensional silicon radiation sensors. Such devices are currently used in the ATLAS experiment at the European Centre for Particle Physics (CERN) for particle tracking in high energy physics. These sensors are the radiation hardest devices ever fabricated and have applications in ground-breaking research in neutron detection, medical dosimetry and space technologies and more. Chapters explore the essential features of silicon particle detectors, interactions of radiation with matter, radiation damage effects, and micro-fabrication, in addition to a providing historical overview of the field. This book will be a key reference for students and researchers working with sensor technologies. Features: The first book dedicated to this unique and growing subject area, which is also widely applicable in high-energy physics, medical physics, space science and beyond Authored by Sherwood Parker, the inventor of the concept of 3D detectors; Cinzia Da Vià, who has brought 3DSi technology to application; and Gian-Franco Dalla Betta, a leading figure in the design and fabrication technology of these devices Explains to non-experts the essential features of silicon particle detectors, interactions of radiation with matter, radiation damage effects, and micro-fabrication
Download or read book Numerical Modelling and Experimental Testing of Heat Exchangers written by Dawid Taler and published by Springer. This book was released on 2018-05-17 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents new methods of numerical modelling of tube heat exchangers, which can be used to perform design and operation calculations of exchangers characterized by a complex flow system. It also proposes new heat transfer correlations for laminar, transition and turbulent flows. A large part of the book is devoted to experimental testing of heat exchangers, and methods for assessing the indirect measurement uncertainty are presented. Further, it describes a new method for parallel determination of the Nusselt number correlations on both sides of the tube walls based on the nonlinear least squares method and presents the application of computational fluid dynamic (CFD) modeling to determine the air-side Nusselt number correlations. Lastly, it develops a control system based on the mathematical model of the car radiator and compares this with the digital proportional-integral-derivative (PID) controller. The book is intended for students, academics and researchers, as well as for designers and manufacturers of heat exchangers.
Download or read book Direct and Large Eddy Simulation X written by Dimokratis G.E. Grigoriadis and published by Springer. This book was released on 2017-10-06 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses nearly all aspects of the state of the art in LES & DNS of turbulent flows, ranging from flows in biological systems and the environment to external aerodynamics, domestic and centralized energy production, combustion, propulsion as well as applications of industrial interest. Following the advances in increased computational power and efficiency, several contributions are devoted to LES & DNS of challenging applications, mainly in the area of turbomachinery, including flame modeling, combustion processes and aeroacoustics. The book includes work presented at the tenth Workshop on 'Direct and Large-Eddy Simulation' (DLES-10), which was hosted in Cyprus by the University of Cyprus, from May 27 to 29, 2015. The goal of the workshop was to establish a state of the art in DNS, LES and related techniques for the computation and modeling of turbulent and transitional flows. The book is of interest to scientists and engineers, both in the early stages of their career and at a more senior level.
Download or read book Sustainable Food Systems from Agriculture to Industry written by Charis M. Galanakis and published by Academic Press. This book was released on 2018-01-02 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Food Systems from Agriculture to Industry: Improving Production and Processing addresses the principle that food supply needs of the present must be met without compromising the ability of future generations to meet their needs. Responding to sustainability goals requires maximum utilization of all raw materials produced and integration of activities throughout all production-to-consumption stages. This book covers production stage activities to reduce postharvest losses and increase use of by-products streams (waste), food manufacturing and beyond, presenting insights to ensure energy, water and other resources are used efficiently and environmental impacts are minimized. The book presents the latest research and advancements in efficient, cost-effective, and environmentally friendly food production and ways they can be implemented within the food industry. Filling the knowledge gap between understanding and applying these advancements, this team of expert authors from around the globe offer both academic and industry perspectives and a real-world view of the challenges and potential solutions that exist for feeding the world in the future. The book will guide industry professionals and researchers in ways to improve the efficiency and sustainability of food systems. Addresses why food waste recovery improves sustainability of food systems, how these issues can be adapted by the food industry, and the role of policy making in ensuring sustainable food production Describes in detail the latest understanding of food processing, food production and waste reduction issues Includes emerging topics, such as sustainable organic food production and computer aided process engineering Analyzes the potential and sustainability of already commercialized processes and products
Download or read book Encyclopedia Of Two phase Heat Transfer And Flow Iii Macro And Micro Flow Boiling And Numerical Modeling Fundamentals A 4 volume Set written by Thome John R and published by World Scientific. This book was released on 2018-03-13 with total page 1460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Set III of this encyclopedia is a new addition to the previous Sets I and II. It contains 26 invited chapters from international specialists on the topics of numerical modeling of two-phase flows and evaporation, fundamentals of evaporation and condensation in microchannels and macrochannels, development and testing of micro two-phase cooling systems for electronics, and various special topics (surface wetting effects, microfin tubes, two-phase flow vibration across tube bundles). The chapters are written both by renowned university researchers and by well-known engineers from leading corporate research laboratories. Numerous 'must read' chapters cover the fundamentals of research and engineering practice on boiling, condensation and two-phase flows, two-phase heat transfer equipment, electronics cooling systems, case studies and so forth. Set III constitutes a 'must have' reference together with Sets I and II for thermal engineering researchers and practitioners.
Download or read book Electronics Cooling written by S. M. Sohel Murshed and published by BoD – Books on Demand. This book was released on 2016-06-15 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring contributions from the renowned researchers and academicians in the field, this book covers key conventional and emerging cooling techniques and coolants for electronics cooling. It includes following thematic topics: - Cooling approaches and coolants - Boiling and phase change-based technologies - Heat pipes-based cooling - Microchannels cooling systems - Heat loop cooling technology - Nanofluids as coolants - Theoretical development for the junction temperature of package chips. This book is intended to be a reference source and guide to researchers, engineers, postgraduate students, and academicians in the fields of thermal management and cooling technologies as well as for people in the electronics and semiconductors industries.
Download or read book Handbook of Clean Energy Systems 6 Volume Set written by Jinyue Yan and published by John Wiley & Sons. This book was released on 2015-06-22 with total page 4038 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Clean Energy Systems brings together an international team of experts to present a comprehensive overview of the latest research, developments and practical applications throughout all areas of clean energy systems. Consolidating information which is currently scattered across a wide variety of literature sources, the handbook covers a broad range of topics in this interdisciplinary research field including both fossil and renewable energy systems. The development of intelligent energy systems for efficient energy processes and mitigation technologies for the reduction of environmental pollutants is explored in depth, and environmental, social and economic impacts are also addressed. Topics covered include: Volume 1 - Renewable Energy: Biomass resources and biofuel production; Bioenergy Utilization; Solar Energy; Wind Energy; Geothermal Energy; Tidal Energy. Volume 2 - Clean Energy Conversion Technologies: Steam/Vapor Power Generation; Gas Turbines Power Generation; Reciprocating Engines; Fuel Cells; Cogeneration and Polygeneration. Volume 3 - Mitigation Technologies: Carbon Capture; Negative Emissions System; Carbon Transportation; Carbon Storage; Emission Mitigation Technologies; Efficiency Improvements and Waste Management; Waste to Energy. Volume 4 - Intelligent Energy Systems: Future Electricity Markets; Diagnostic and Control of Energy Systems; New Electric Transmission Systems; Smart Grid and Modern Electrical Systems; Energy Efficiency of Municipal Energy Systems; Energy Efficiency of Industrial Energy Systems; Consumer Behaviors; Load Control and Management; Electric Car and Hybrid Car; Energy Efficiency Improvement. Volume 5 - Energy Storage: Thermal Energy Storage; Chemical Storage; Mechanical Storage; Electrochemical Storage; Integrated Storage Systems. Volume 6 - Sustainability of Energy Systems: Sustainability Indicators, Evaluation Criteria, and Reporting; Regulation and Policy; Finance and Investment; Emission Trading; Modeling and Analysis of Energy Systems; Energy vs. Development; Low Carbon Economy; Energy Efficiencies and Emission Reduction. Key features: Comprising over 3,500 pages in 6 volumes, HCES presents a comprehensive overview of the latest research, developments and practical applications throughout all areas of clean energy systems, consolidating a wealth of information which is currently scattered across a wide variety of literature sources. In addition to renewable energy systems, HCES also covers processes for the efficient and clean conversion of traditional fuels such as coal, oil and gas, energy storage systems, mitigation technologies for the reduction of environmental pollutants, and the development of intelligent energy systems. Environmental, social and economic impacts of energy systems are also addressed in depth. Published in full colour throughout. Fully indexed with cross referencing within and between all six volumes. Edited by leading researchers from academia and industry who are internationally renowned and active in their respective fields. Published in print and online. The online version is a single publication (i.e. no updates), available for one-time purchase or through annual subscription.
Download or read book Advances in Heat Transfer Augmentation Techniques in Single Phase Flows written by Varun Goel and published by CRC Press. This book was released on 2024-01-26 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Augmentation of heat transfer is important in energy conservation and developing sustainable energy systems. This book provides the science necessary to understand the basics of heat transfer augmentation in single-phase engineering systems. It considers theory and practice including computational and experimental procedures, evaluation techniques for performance, and new trends. Several applications of augmentation methods like surface modification, introduction of vortex flow and impinging jets, opportunities of ultrasound and magnetic fields, pulsatile flows, heat exchangers, and nanofluids are provided. Details of basic phenomena and mechanisms are highlighted. Key features: Provides the fundamental science needed to understand and further develop heat transfer augmentation for future energy systems Give examples of how ultrasound and magnetic fields, vortex flow, impinging jets, surface modification and nanofluids can augment heat transfer Considers basic issues of computational and experimental methods for analysis, design, and evaluation of efficient and sustainable heat transfer It is an ideal reference text for graduate students and academic researchers working in the fields of mechanical, aerospace, industrial, manufacturing, and chemical engineering.
Download or read book 8th AIAA ASME Joint Thermophysics and Heat Transfer Conference written by and published by . This book was released on 2002 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Transfer Enhancement in Chemical Processes written by Lili Sun and published by Elsevier. This book was released on 2024-08-30 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Transfer Enhancement in Chemical Processes combines process technologies with heat exchange equipment to study heat transfer enhancement. The book provides guidance for the progress of process technologies and the application of enhanced heat transfer equipment. It analyzes the basic principles of heat transfer and summarizes the theories and methods of heat transfer enhancement, while also focusing on three representative processes in petrochemical industry, including oil refining, aromatics, and ethylene production. The book summarizes in a systematical way the practical application of heat transfer enhancement in the petrochemical industry, from the equipment components, the processes, and the whole plant. Puts theory into practice, providing guidance for the application of scientific research achievements Integrates process technologies with process intensification, providing guidance for process flow enhancement Combines process with equipment, introducing heat transfer enhancement technologies suitable for different processes Covers the oil refining unit, aromatics unit, the ethylene plant and its downstream units
Download or read book Multiphase Flow Dynamics 1 written by Nikolay Ivanov Kolev and published by Springer. This book was released on 2015-04-20 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: In its fifth extended edition the successful monograph package “Multiphase Flow Dynamics” contains theory, methods and practical experience for describing complex transient multi-phase processes in arbitrary geometrical configurations, providing a systematic presentation of the theory and practice of numerical multi-phase fluid dynamics. In the present first volume the local volume and time averaging is used to derive a complete set of conservation equations for three fluids each of them having multi components as constituents. Large parts of the book are devoted on the design of successful numerical methods for solving the obtained system of partial differential equations. Finally the analysis is repeated for boundary fitted curvilinear coordinate systems designing methods applicable for interconnected multi-blocks. This fifth edition includes various updates, extensions, improvements and corrections, as well as a completely new chapter containing the basic physics describing the multi-phase flow in turbines, compressors, pumps and other rotating hydraulic machines.
Download or read book Multiphase Flow Dynamics 3 written by Nikolay Ivanov Kolev and published by Springer Science & Business Media. This book was released on 2011-09-25 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multi-phase flows are part of our natural environment such as tornadoes, typhoons, air and water pollution and volcanic activities as well as part of industrial technology such as power plants, combustion engines, propulsion systems, or chemical and biological industry. The industrial use of multi-phase systems requires analytical and numerical strategies for predicting their behavior. .In its fourth extended edition the successful monograph package “Multiphase Flow Daynmics” contains theory, methods and practical experience for describing complex transient multi-phase processes in arbitrary geometrical configurations, providing a systematic presentation of the theory and practice of numerical multi-phase fluid dynamics. In the present third volume methods for describing of the thermal interactions in multiphase dynamics are provided. In addition a large number of valuable experiments is collected and predicted using the methods introduced in this monograph. In this way the accuracy of the methods is revealed to the reader. This fourth edition includes various updates, extensions, improvements and corrections. "The literature in the field of multiphase flows is numerous. Therefore, it is very important to have a comprehensive and systematic overview including useful numerical methods. The volumes have the character of a handbook and accomplish this function excellently. The models are described in detail and a great number of comprehensive examples and some cases useful for testing numerical solutions are included. These two volumes are very useful for scientists and practicing engineers in the fields of technical thermodynamics, chemical engineering, fluid mechanics, and for mathematicians with interest in technical problems. Besides, they can give a good overview of the dynamically developing, complex field of knowledge to students. This monograph is highly recommended,” BERND PLATZER, ZAAM In the present third volume methods for describing of the thermal interactions in multiphase dynamics are provided. In addition a large number of valuable experiments is collected and predicted using the methods introduced in this monograph. In this way the accuracy of the methods is revealed to the reader. This fourth edition includes various updates, extensions, improvements and corrections. "The literature in the field of multiphase flows is numerous. Therefore, it is very important to have a comprehensive and systematic overview including useful numerical methods. The volumes have the character of a handbook and accomplish this function excellently. The models are described in detail and a great number of comprehensive examples and some cases useful for testing numerical solutions are included. These two volumes are very useful for scientists and practicing engineers in the fields of technical thermodynamics, chemical engineering, fluid mechanics, and for mathematicians with interest in technical problems. Besides, they can give a good overview of the dynamically developing, complex field of knowledge to students. This monograph is highly recommended,” BERND PLATZER, ZAAM
Download or read book Multiphase Flow Dynamics 2 written by Nikolay Ivanov Kolev and published by Springer Science & Business Media. This book was released on 2005 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multi-phase flows are part of our natural environment such as tornadoes, typhoons, air and water pollution and volcanic activities as well as part of industrial technology such as power plants, combustion engines, propulsion systems, or chemical and biological industry. The industrial use of multi-phase systems requires analytical and numerical strategies for predicting their behavior. In its third extended edition this book contains theory, methods and practical experience for describing complex transient multi-phase processes in arbitrary geometrical configurations. This book provides a systematic presentation of the theory and practice of numerical multi-phase fluid dynamics. In the present second volume the mechanical and thermal interactions in multiphase dynamics are provided. This third edition includes various updates, extensions, improvements and corrections.
Download or read book Terotechnology written by Radek, N. and published by Materials Research Forum LLC. This book was released on 2018-08-25 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume presents advances in materials research and technology in the area of terotechnology, i.e. the technology of installation, maintenance, replacement and removal of plant machinery and equipment, reliability analysis, technical diagnostics, tribology and technical safety. Specific topics include Cavitation Erosion, Simulation of Particle Erosion, Mechanically-assisted Laser Forming, Laser Machining of Tool Steels, Titanium Carbonitride Coatings, Causes of Cracks in Thermit Welds, Diamond-Like Coatings on Titanium, Reinforcement of Concrete, Fatigue Strength of Construction Elements, Modeling of Mining Support Structures, Surface Treatments of Sintered Stainless Steel, Thermal Welding, Joints of Nickel-Based Superalloys, Robotic Laser Cleaning of Materials, Tribological Properties of Laser-processed ESD Coatings, Laser-modified WC-Cu Electro-Spark Coatings, anti-Graffiti Coating Systems.
Download or read book Advances in Heat Transfer written by Young I. Cho and published by Academic Press. This book was released on 2011-11-23 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Heat Transfer fills the information gap between regularly scheduled journals and university-level textbooks by providing in-depth review articles over a broader scope than in journals or texts. The articles, which serve as a broad review for experts in the field, will also be of great interest to non-specialists who need to keep up-to-date with the results of the latest research. This serial is essential reading for all mechanical, chemical and industrial engineers working in the field of heat transfer, graduate schools or industry. Provides an overview of review articles on topics of current interest Bridges the gap between academic researchers and practitioners in industry A long-running and prestigious series
