Download or read book Structural Steel Design to Eurocode 3 and AISC Specifications written by Claudio Bernuzzi and published by John Wiley & Sons. This book was released on 2016-05-02 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Steel Design to Eurocode 3 and AISC Specifications deals with the theory and practical applications of structural steel design in Europe and the USA. The book covers appropriate theoretical and background information, followed by a more design‐oriented coverage focusing on European and United States specifications and practices, allowing the reader to directly compare the approaches and results of both codes. Chapters follow a general plan, covering: A general section covering the relevant topics for the chapter, based on classical theory and recent research developments A detailed section covering design and detailing to Eurocode 3 specification A detailed section covering design and detailing to AISC specifications Fully worked examples are using both codes are presented. With construction companies working in increasingly international environments, engineers are more and more likely to encounter both codes. Written for design engineers and students of civil and structural engineering, this book will help both groups to become conversant with both code systems.
Download or read book Fatigue Design of Steel and Composite Structures written by Alain Nussbaumer and published by John Wiley & Sons. This book was released on 2012-01-09 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume addresses the specific subject of fatigue, a subject not familiar to many engineers, but still relevant for proper and good design of numerous steel structures. It explains all issues related to the subject: Basis of fatigue design, reliability and various verification formats, determination of stresses and stress ranges, fatigue strength, application range and limitations. It contains detailed examples of applications of the concepts, computation methods and verifications.
Download or read book Fatigue Design of Steel and Composite Structures written by ECCS - European Convention for Constructional Steelwork and published by John Wiley & Sons. This book was released on 2018-06-26 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume addresses the specific subject of fatigue, a subject not familiar to many engineers, but still relevant for proper and good design of numerous steel structures. It explains all issues related to the subject: Basis of fatigue design, reliability and various verification formats, determination of stresses and stress ranges, fatigue strength, application range and limitations. It contains detailed examples of applications of the concepts, computation methods and verifications.
Download or read book The Building Regulations written by M. J. Billington and published by John Wiley & Sons. This book was released on 2017-03-20 with total page 1358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since publication of the first edition in 1976, The Building Regulations: Explained and Illustrated has provided a detailed, authoritative, highly illustrated and accessible guide to the regulations that must be adhered to when constructing, altering or extending a building in England and Wales. This latest edition has been fully revised throughout. Much of the content has been completely rewritten to cover the substantial changes to the Regulations since publication of the 13th edition, to ensure it continues to provide the detailed guidance needed by all those concerned with building work, including architects, building control officers, Approved Inspectors, Competent Persons, building surveyors, engineers, contractors and students in the relevant disciplines.
Download or read book Metric Handbook written by Pamela Buxton and published by Taylor & Francis. This book was released on 2021-11-25 with total page 907 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Metric Handbook is the major handbook of planning and design data for architects and architecture students, with over 100,000 copies sold to successive generations of architects and designers. It remains the ideal starting point for any project and belongs in every design office. The seventh edition references the latest regulations and construction standards and includes new chapters on data centres and logistics facilities alongside basic design data for all the major building types. For each building type, the book gives the basic design requirements and all the principal dimensional data, and succinct guidance on how to use the information and what regulations the designer needs to be aware of. As well as buildings, the Metric Handbook deals with broader aspects of design such as materials, acoustics, and lighting, and general design data on human dimensions and space requirements. The Metric Handbook is the unique reference for solving everyday planning problems.
Download or read book Construction Materials Reference Book written by David Doran and published by Routledge. This book was released on 2013-07-24 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the definitive reference source for professionals involved in the conception, design and specification stages of a construction project. The theory and practical aspects of each material is covered, with an emphasis being placed on properties and appropriate use, enabling broader, deeper understanding of each material leading to greater confidence in their application. Containing fifty chapters written by subject specialists, Construction Materials Reference Book covers the wide range of materials that are encountered in the construction process, from traditional materials such as stone through masonry and steel to advanced plastics and composites. With increased significance being placed on broader environmental issues, issues of whole life cost and sustainability are covered, along with health and safety aspects of both use and installation.
Download or read book Steel Detailers Manual written by Alan Hayward and published by John Wiley & Sons. This book was released on 2011-05-06 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly illustrated manual provides practical guidance on structural steelwork detailing. It: · describes the common structural shapes in use and how they are joined to form members and complete structures · explains detailing practice and conventions · provides detailing data for standard sections, bolts and welds · emphasises the importance of tolerances in order to achieve proper site fit-up · discusses the important link between good detailing and construction costs Examples of structures include single and multi-storey buildings, towers and bridges. The detailing shown will be suitable in principle for fabrication and erection in many countries, and the sizes shown will act as a guide to preliminary design. The third edition has been revised to take account of the new Eurocodes on structural steel work, together with their National Annexes. The new edition also takes account of developments in 3-D modelling techniques and it includes more CAD standard library details.
Download or read book Materials for Architects and Builders written by Arthur Lyons and published by Routledge. This book was released on 2019-08-28 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Architects and Builders provides a clear and concise introduction to the broad range of materials used within the construction industry and covers the essential details of their manufacture, key physical properties, specification and uses. Understanding the basics of materials is a crucial part of undergraduate and diploma construction or architecture-related courses, and this established textbook helps the reader to do just that with the help of colour photographs and clear diagrams throughout. This new sixth edition has been completely revised and updated to include the latest developments in materials research, new images, appropriate technologies and relevant legislation. The ecological effects of building construction and lifetime use remain an important focus, and this new edition includes a wide range of energy-saving building components.
Download or read book Steel Designers Manual written by SCI (Steel Construction Institute) and published by John Wiley & Sons. This book was released on 2016-06-27 with total page 1410 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 2010 the then current European national standards for building and construction were replaced by the EN Eurocodes, a set of pan-European model building codes developed by the European Committee for Standardization. The Eurocodes are a series of 10 European Standards (EN 1990 – EN 1999) that provide a common approach for the design of buildings, other civil engineering works and construction products. The design standards embodied in these Eurocodes will be used for all European public works and are set to become the de-facto standard for the private sector in Europe, with probable adoption in many other countries. This classic manual on structural steelwork design was first published in 1955, since when it has sold many tens of thousands of copies worldwide. For the seventh edition of the Steel Designers' Manual all chapters have been comprehensively reviewed, revised to ensure they reflect current approaches and best practice, and brought in to compliance with EN 1993: Design of Steel Structures (the so-called Eurocode 3).
Download or read book Design of Steel Structures to Eurocodes written by Ioannis Vayas and published by Springer. This book was released on 2018-11-23 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook describes the rules for the design of steel and composite building structures according to Eurocodes, covering the structure as a whole, as well as the design of individual structural components and connections. It addresses the following topics: the basis of design in the Eurocodes framework; the loads applied to building structures; the load combinations for the various limit states of design and the main steel properties and steel fabrication methods; the models and methods of structural analysis in combination with the structural imperfections and the cross-section classification according to compactness; the cross-section resistances when subjected to axial and shear forces, bending or torsional moments and to combinations of the above; component design and more specifically the design of components sensitive to instability phenomena, such as flexural, torsional and lateral-torsional buckling (a section is devoted to composite beams); the design of connections and joints executed by bolting or welding, including beam to column connections in frame structures; and alternative configurations to be considered during the conceptual design phase for various types of single or multi-storey buildings, and the design of crane supporting beams. In addition, the fabrication and erection procedures, as well as the related quality requirements and the quality control methods are extensively discussed (including the procedures for bolting, welding and surface protection). The book is supplemented by more than fifty numerical examples that explain in detail the appropriate procedures to deal with each particular problem in the design of steel structures in accordance with Eurocodes. The book is an ideal learning resource for students of structural engineering, as well as a valuable reference for practicing engineers who perform designs on basis of Eurocodes.
Download or read book Design of Steel Structures written by ECCS - European Convention for Constructional Steelwork and published by John Wiley & Sons. This book was released on 2014-01-22 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the design concept of Eurocode 3 for steel structures in building construction, and their practical application. Following a discussion of the basis of design, including the limit state approach, the material standards and their use are detailed. The fundamentals of structural analysis and modeling are presented, followed by the design criteria and approaches for various types of structural members. The following chapters expand on the principles and applications of elastic and plastic design, each exemplified by the step-by-step design calculation of a braced steel-framed building and an industrial building, respectively. Besides providing the necessary theoretical concepts for a good understanding, this manual intends to be a supporting tool for the use of practicing engineers. In order of this purpose, throughout the book, numerous worked examples are provided, concerning the analysis of steel structures and the design of elements under several types of actions. These examples will provide for a smooth transition from earlier national codes to the Eurocode.
Download or read book Design of Cold formed Steel Structures written by ECCS - European Convention for Constructional Steelwork and published by John Wiley & Sons. This book was released on 2013-08-06 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is concerned with design of cold-formed steel structures in building based on the Eurocode 3 package, particularly on EN 1993-1-3. It contains the essentials of theoretical background and design rules for cold-formed steel sections and sheeting, members and connections for building applications. Elaborated examples and design applications - more than 200 pages - are included in the respective chapters in order to provide a better understanding to the reader.
Download or read book Stability and Ductility of Steel Structures 2019 written by František Wald and published by CRC Press. This book was released on 2019-08-30 with total page 1373 pages. Available in PDF, EPUB and Kindle. Book excerpt: For more than forty years the series of International Colloquia on Stability and Ductility of Steel Structures has been supported by the Structural Stability Research Council (SSRC). Its objective is to present the latest results in theoretical, numerical and experimental research in the area of stability and ductility of steel and steel-concrete composite structures. In Stability and Ductility of Steel Structures 2019, the focus is on new concepts and procedures concerning the analysis and design of steel structures and on the background, development and application of rules and recommendations either appearing in recently published Codes or Specifications and in emerging versions, all in anticipation of the new edition of Eurocodes. The series of International Colloquia on Stability and Ductility of Steel Structures started in Paris in 1972, the last five being held in: Timisoara, Romania (1999), Budapest, Hungary (2002), Lisbon, Portugal (2006), Rio de Janeiro, Brazil (2010) and Timisoara, Romania (2016). The 2019 edition of SDSS is organized by the Czech Technical University in Prague.
Download or read book Design of Joints in Steel Structures written by ECCS - European Convention for Constructional Steelwork and published by John Wiley & Sons. This book was released on 2017-06-19 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the basic concepts and the design rules included in Eurocode 3 "Design of steel structures" Part 1-8 "Design of joints". Joints in composite construction are also addressed through references to Eurocode 4 "Design of composite steel and concrete structures" Part 1-1 "General rules and rules for buildings". Moreover, the relevant UK National Annexes are also taken into account. Attention has to be duly paid to the joints when designing a steel or composite structure, in terms of the global safety of the construction, and also in terms of the overall cost, including fabrication, transportation and erection. Therefore, in this book, the design of the joints themselves is widely detailed, and aspects of selection of joint configuration and integration of the joints into the analysis and the design process of the whole construction are also fully covered. Connections using mechanical fasteners, welded connections, simple joints, moment-resisting joints and lattice girder joints are considered. Various joint configurations are treated, including beam-to-column, beam-to-beam, column bases, and beam and column splice configurations, under different loading situations (axial forces, shear forces, bending moments and their combinations). The book also briefly summarises the available knowledge relating to the application of the Eurocode rules to joints under fire, fatigue, earthquake, etc., and also to joints in a structure subjected to exceptional loadings, where the risk of progressive collapse has to be mitigated. Finally, there are some worked examples, plus references to already published examples and to design tools, which will provide practical help to practitioners.
Download or read book Building Regulations in Brief written by Ray Tricker and published by Routledge. This book was released on 2014-04-16 with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt: This eighth edition of the most popular and trusted guide to the building regulations is the most comprehensive revision yet. It reflects all the latest amendments to Building Regulations, Planning Permission and the Approved Documents A,B,C, H, K, P, Regulation 7 incorporating all amendments up to December 2013 (including the changes to Leaflets L1A and L2A regarding the conservation of heat and energy in new buildings which came into effect April 2014). This new edition also contains details of the new national planning guidance system and initiatives to speed up the planning process such as the new on line planning application process. It contains an updated list of fees for planning consents and provides guidance on the changes to permitted development rights in Agricultural, Business and Residential buildings which came into force on 1 October 2013. Giving practical information throughout on how to work with (and within) the regulations, this book enables compliance in the simplest and most cost-effective manner possible. The no-nonsense approach of Building Regulations in Brief cuts through the confusion and explains the meaning of the regulations; consequently it has become a favourite for anyone involved in the building industry as well as those planning to have work carried out in their home.
Download or read book Design of Joints in Steel and Composite Structures written by ECCS - European Convention for Constructional Steelwork and published by John Wiley & Sons. This book was released on 2016-06-22 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the basic concepts and the design rules included in Eurocode 3 Design of steel structures: Part 1-8 Design of joints Joints in composite construction are also addressed through references to Eurocode 4 Design of composite steel and concrete structures Part 1-1: General rules and rules for buildings. Attention has to be duly paid to the joints when designing a steel or composite structure, in terms of the global safety of the construction, and also in terms of the overall cost, including fabrication, transportation and erection. Therefore, in this book, the design of the joints themselves is widely detailed, and aspects of selection of joint configuration and integration of the joints into the analysis and the design process of the whole construction are also fully covered. Connections using mechanical fasteners, welded connections, simple joints, moment-resisting joints and lattice girder joints are considered. Various joint configurations are treated, including beam-to-column, beam-to-beam, column bases, and beam and column splice configurations, under different loading situations (axial forces, shear forces, bending moments and their combinations). The book also briefly summarises the available knowledge relating to the application of the Eurocode rules to joints under fire, fatigue, earthquake, etc., and also to joints in a structure subjected to exceptional loadings, where the risk of progressive collapse has to be mitigated. Finally, there are some worked examples, plus references to already published examples and to design tools, which will provide practical help to practitioners.
Download or read book Design and Analysis of Connections in Steel Structures written by Alfredo Boracchini and published by John Wiley & Sons. This book was released on 2018-07-10 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dieses Buch führt in alle Aspekte der sicheren Berechnung, Bemessung und Konstruktion von wirtschaftlichen modernen Verbindungen im Stahlbau ein. Die Hintergrunderläuterungen sind nicht an eine spezifische Norm gekoppelt, sondern es werden unterschiedliche Normen und Methoden verglichen, die in der Praxis zur Anwendung kommen, wie z. B. Eurocode, AISC, DIN, BS. Anhand einer Reihe von Beispielen werden Problemlösungen detailliert beschrieben und illustriert. Damit erhält der Leser alle notwendigen Werkzeuge an die Hand, um auch komplexe Probleme bei der Konstruktion von Verbindungen zu lösen. Das Buch ist für Berufseinsteiger, für erfahrene Praktiker sowie auch für Stahlbaufachleute eine Arbeitshilfe, denn es werden einfache und komplexe Beanspruchungen an Verbindungen abgebildet. Weniger ausführlich werden Erdbebenauslegung, Schweißnähte, die Wechselwirkung mit anderen Materialien (Beton, Holz) und kalt geformte Verbindungen behandelt.
