Download or read book Evolution of Thin Film Morphology written by Matthew Pelliccione and published by Springer Science & Business Media. This book was released on 2008-01-29 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focus of this book is on modeling and simulations used in research on the morphological evolution during film growth. The authors emphasize the detailed mathematical formulation of the problem. The book will enable readers themselves to set up a computational program to investigate specific topics of interest in thin film deposition. It will benefit those working in any discipline that requires an understanding of thin film growth processes.
Download or read book Handbook of Deposition Technologies for Films and Coatings written by Peter M. Martin and published by William Andrew. This book was released on 2009-12-01 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 3e, edited by Peter M. Martin, PNNL 2005 Inventor of the Year, is an extensive update of the many improvements in deposition technologies, mechanisms, and applications. This long-awaited revision includes updated and new chapters on atomic layer deposition, cathodic arc deposition, sculpted thin films, polymer thin films and emerging technologies. Extensive material was added throughout the book, especially in the areas concerned with plasma-assisted vapor deposition processes and metallurgical coating applications.
Download or read book Materials Science of Thin Films written by Milton Ohring and published by Academic Press. This book was released on 2002 with total page 817 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book that can be considered a textbook on thin film science, complete with exercises at the end of each chapter. Ohring has contributed many highly regarded reference books to the AP list, including Reliability and Failure of Electronic Materials and the Engineering Science of Thin Films. The knowledge base is intended for science and engineering students in advanced undergraduate or first-year graduate level courses on thin films and scientists and engineers who are entering or require an overview of the field. Since 1992, when the book was first published, the field of thin films has expanded tremendously, especially with regard to technological applications. The second edition will bring the book up-to-date with regard to these advances. Most chapters have been greatly updated, and several new chapters have been added.
Download or read book Low Energy Ion Irradiation of Materials written by Bernd Rauschenbach and published by Springer Nature. This book was released on 2022-08-19 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to all aspects of low-energy ion–solid interaction from basic principles to advanced applications in materials science. It features a balanced and insightful approach to the fundamentals of the low-energy ion–solid surface interaction, focusing on relevant topics such as interaction potentials, kinetics of binary collisions, ion range, radiation damages, and sputtering. Additionally, the book incorporates key updates reflecting the latest relevant results of modern research on topics such as topography evolution and thin-film deposition under ion bombardment, ion beam figuring and smoothing, generation of nanostructures, and ion beam-controlled glancing angle deposition. Filling a gap of almost 20 years of relevant research activity, this book offers a wealth of information and up-to-date results for graduate students, academic researchers, and industrial scientists working in these areas.
Download or read book Evolution of Thin Film and Surface Structure and Morphology Volume 355 written by B. G. Demczyk and published by . This book was released on 1995-07-18 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners.
Download or read book Materials Science in Microelectronics I written by Eugene Machlin and published by Elsevier. This book was released on 2010-07-07 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin films play a key role in the material science of microelectronics, and the subject matter of thin-films divides naturally into two headings: processing / structure relationship, and structure / properties relationship.The first volume of Materials Science in Microelectronics focuses on the first relationship – that between processing and the structure of the thin-film. The state of the thin film's surface during the period that one monolayer exists - before being buried in the next layer – determines the ultimate structure of the thin film, and thus its properties. This volume takes into consideration the following potential influencing factors: crystal defects, void structure, grain structure, interface structure in epitaxial films, the structure of amorphous films, and reaction-induced structure.An ideal text or reference work for students and researchers in material science, who need to learn the basics of thin films.
Download or read book Correlation Between Microstructure and Surface Structure Evolution in Polycrystalline Films written by Adriana Eleni Lita and published by . This book was released on 2000 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CAS Proceedings written by and published by . This book was released on 1999 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structure and Evolution of Surfaces Volume 440 written by Robert C. Cammarata and published by . This book was released on 1997-11-13 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together an interdisciplinary group of surface physicists, chemists and materials scientists to present the most current advances in the area of surface science. Both scientific and technological issues are addressed. Topics include: surface and step structure; morphology, roughness and instabilities; kinetic processes; nucleation on surfaces and interfaces; mechanics of surfaces; self-assembled and Langmuir-Blodgett films; thin-film surfaces and growth; chemistry and modification of surfaces and metal-semiconductor interfaces.
Download or read book Nano Plating Microstructure Formation Theory of Plated Films and a Database of Plated Films written by Tohru Watanabe and published by Elsevier. This book was released on 2004-03-05 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern plating technology is highly advanced, and has developed to cover a wide range of applications. In addition to the traditional use for surface finishing, plating technology can now offer novel processes to fabricate high-performance films or fine microstructural bodies in the microelectronics industry. This rapid progress reflects the potential for the electroplating plating method to become one of today's leading-edge technologies. This book will introduce a concept of a Microstructure Control Theory for plated films, describe and discuss various experimental results that support the theory, and finally, present a collection of experimental data on 53 types of plated metal/alloy systems with a special emphasis on their microstructure.The unique feature of this database is that most of the plating baths are simple and contain no additives. In addition, amorphous materials were used as substrates to avoid the effects of substrate structure, and single-crystal substrates were chosen to study the epitaxial growth phenomenon.* Contains a comprehensive database for the microstructure of plated films* The book is very logically structured with a very detailed contents which makes finding information easy* The book gives a very good overview of the research and development in this field and each chapter is fully referenced
Download or read book Thin Film Materials written by L. B. Freund and published by Cambridge University Press. This book was released on 2004-01-08 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin film mechanical behavior and stress presents a technological challenge for materials scientists, physicists and engineers. This book provides a comprehensive coverage of the major issues and topics dealing with stress, defect formation, surface evolution and allied effects in thin film materials. Physical phenomena are examined from the continuum down to the sub-microscopic length scales, with the connections between the structure of the material and its behavior described. Theoretical concepts are underpinned by discussions on experimental methodology and observations. Fundamental scientific concepts are embedded through sample calculations, a broad range of case studies with practical applications, thorough referencing, and end of chapter problems. With solutions to problems available on-line, this book will be essential for graduate courses on thin films and the classic reference for researchers in the field.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1987 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Power Impulse Magnetron Sputtering written by Daniel Lundin and published by Elsevier. This book was released on 2019-08-30 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Power Impulse Magnetron Sputtering: Fundamentals, Technologies, Challenges and Applications is an in-depth introduction to HiPIMS that emphasizes how this novel sputtering technique differs from conventional magnetron processes in terms of both discharge physics and the resulting thin film characteristics. Ionization of sputtered atoms is discussed in detail for various target materials. In addition, the role of self-sputtering, secondary electron emission and the importance of controlling the process gas dynamics, both inert and reactive gases, are examined in detail with an aim to generate stable HiPIMS processes. Lastly, the book also looks at how to characterize the HiPIMS discharge, including essential diagnostic equipment. Experimental results and simulations based on industrially relevant material systems are used to illustrate mechanisms controlling nucleation kinetics, column formation and microstructure evolution.
Download or read book Copper Interconnect Technology written by Tapan Gupta and published by Springer Science & Business Media. This book was released on 2010-01-22 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since overall circuit performance has depended primarily on transistor properties, previous efforts to enhance circuit and system speed were focused on transistors as well. During the last decade, however, the parasitic resistance, capacitance, and inductance associated with interconnections began to influence circuit performance and will be the primary factors in the evolution of nanoscale ULSI technology. Because metallic conductivity and resistance to electromigration of bulk copper (Cu) are better than aluminum, use of copper and low-k materials is now prevalent in the international microelectronics industry. As the feature size of the Cu-lines forming interconnects is scaled, resistivity of the lines increases. At the same time electromigration and stress-induced voids due to increased current density become significant reliability issues. Although copper/low-k technology has become fairly mature, there is no single book available on the promise and challenges of these next-generation technologies. In this book, a leader in the field describes advanced laser systems with lower radiation wavelengths, photolithography materials, and mathematical modeling approaches to address the challenges of Cu-interconnect technology.
Download or read book Materials Surface Processing by Directed Energy Techniques written by Yves Pauleau and published by Elsevier. This book was released on 2006-04-25 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current status of the science and technology related to coatings, thin films and surface modifications produced by directed energy techniques is assessed in Materials Surface Processing by Directed Energy Techniques. The subject matter is divided into 20 chapters - each presented at a tutorial level – rich with fundamental science and experimental results. New trends and new results are also evoked to give an overview of future developments and applications. - Provides a broad overview on modern coating and thin film deposition techniques, and their applications - Presents and discusses various problems of physics and chemistry involved in the production, characterization and applications of coatings and thin films - Each chapter includes experimental results illustrating various models, mechanisms or theories
Download or read book Encyclopedia of Iron Steel and Their Alloys Online Version written by Rafael Colás and published by CRC Press. This book was released on 2016-01-06 with total page 3918 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of many important works featured in CRC Press’ Metals and Alloys Encyclopedia Collection, the Encyclopedia of Iron, Steel, and Their Alloys covers all the fundamental, theoretical, and application-related aspects of the metallurgical science, engineering, and technology of iron, steel, and their alloys. This Five-Volume Set addresses topics such as extractive metallurgy, powder metallurgy and processing, physical metallurgy, production engineering, corrosion engineering, thermal processing, metalworking, welding, iron- and steelmaking, heat treating, rolling, casting, hot and cold forming, surface finishing and coating, crystallography, metallography, computational metallurgy, metal-matrix composites, intermetallics, nano- and micro-structured metals and alloys, nano- and micro-alloying effects, special steels, and mining. A valuable reference for materials scientists and engineers, chemists, manufacturers, miners, researchers, and students, this must-have encyclopedia: Provides extensive coverage of properties and recommended practices Includes a wealth of helpful charts, nomograms, and figures Contains cross referencing for quick and easy search Each entry is written by a subject-matter expert and reviewed by an international panel of renowned researchers from academia, government, and industry. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]
