Download or read book Evaluation of Test Methods to Predict Moisture Damage in Asphalt Concrete written by Bradley J. Bruce and published by . This book was released on 1990 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The actual moisture susceptibility of 10 bituminous mixtures placed in the field was compared to the moisture susceptibility that was predicted during the laboratory evaluation of the same mix design. Laboratory mixtures were evaluated using the modified Lottman procedure and the Root-Tunnicliff procedure, in addition to routine moisture susceptibility testing which includes immersion compression testing. After two years, cores were taken from the field projects. The condition of the cores and their present susceptibility to moisture damage were determined by performing modified Lottman and Root-Tunnicliff testing. A feature of the evaluation process was the use of the ACMODAS program to predict the remaining service life of the plant mix cores.
Download or read book Moisture Damage in Asphalt Concrete written by Russell G. Hicks and published by Transportation Research Board. This book was released on 1991 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This synthesis will be of interest to pavement designers, construction engineers, maintenance engineers, and others interested in avoiding or limiting moisture damage in asphalt concrete. Information is provided on physical and chemical explanations for moisture damage in asphalt concrete, along with a discussion of current practices and test methods for determining or reducing the susceptibility of various asphalt concrete components and mixtures to such damage. Moisture damage in asphalt concrete is a nationwide problem which often necessitates premature replacement of highway pavement surfaces. This report of the Transportation Research Board describes the underlying physical and chemical phenomena responsible for such damage. Current test methods used to determine the susceptibility of asphalt concretes, or their constituents, to moisture damage are described and evaluated. Additionally, current practices for minimizing the potential for moisture damage are examined.
Download or read book Field Evaluation and Correlation of Laboratory Test Method for Predicting Moisture induced Damage to Asphalt Concrete written by Robert P. Lottman and published by . This book was released on 1982 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evaluation of Procedures Used to Predict Moisture Damage in Asphalt Mixtures written by Kevin D. Stuart and published by . This book was released on 1986 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: Procedures for evaluating the moisture susceptibility of asphalt mixtures were compared by performing them on mixtures having a known history of susceptibility. Data included the retained ratios, visual stripping, mechanical values (tensile strength, stability, etc.), saturation, and swell. The most promising procedures appeared to be the NCHRP 246 and NCHRP 274.
Download or read book Predicting Moisture Induced Damage to Asphalt Concrete Design Mixes written by Bradley J. Bruce and published by . This book was released on 1978 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many asphalt, aggregate, mineral filler and chemical additive combinations were tested for the correlation of the 'E' Modulus Test with visual assessment of the condition of the asphalt aggregate specimen and the results of other tests methods including Marshall Method, Resilient Modulus, Immersion Compression and Maximum Tensile Stress. Specimens used in conventional tests were treated in the manner prescribed by the method. Specimens for 'E' Modulus, Resilient Modulus and Maximum Tensile Stress were tested both before and after subjecting them to severe artificial conditions that were conceived as comparable to several years of natural exposure to the elements. 'E' Modulus was judged to be too inconsistent with other variables to be used as an acceptable criteria. The data suggests that Maximum Tensile Stress and Resilient Modulus tests would be valid tools for the evaluation of asphalt aggregate susceptibility to moisture damage. Immersion Compression data could be interpreted to provide information about stripping resistance and could serve to aid in the fabrication of mixes with reduced moisture susceptibility. The Marshall Method Testing provided inconsistent indications of moisture susceptibility using either flow or stability values.
Download or read book Hot mix Asphalt Mixtures written by and published by . This book was released on 1999 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Test Method to Determine Aggregate asphalt Adhesion Properties and Potential Moisture Damage written by Andrew Hanz and published by . This book was released on 2007 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Improved Conditioning and Testing Procedures for HMA Moisture Susceptibility written by Mansour Solaimanian and published by Transportation Research Board. This book was released on 2007 with total page 79 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explores whether combining the environmental conditioning system with the simple performance test would provide a superior procedure for determining the moisture susceptibility of hot-mix asphalt (HMA).
Download or read book Evaluation of Procedures Used to Predict Moisture Damage in Asphalt Mixtures written by K. D. Stuart and published by . This book was released on 1986 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Procedures for evaluating the moisture susceptibility of asphalt mixtures were compared by performing them on mixtures having a known history of susceptibility. Data included the retained ratios, visual stripping, mechanical values (tensile strength, stability, etc.), saturation, and swell. The most promising procedures appeared to be the NCHRP 246 and NCHRP 274.
Download or read book Evaluation of Moisture Damage Within Asphalt Concrete Mixes written by Brij D. Shah and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Pavements are a major part of the infrastructure in the United States. Moisture damage of these pavements is a significant problem. To predict and prevent this kind of moisture damage a great deal of research has been performed on this issue in past. This study validates an analytical approach based on surface energy aimed at assessing moisture damage. Two types of bitumen and three aggregates are evaluated in the study. The two types of bitumen represent very different chemical extremes and the three aggregates (a limestone, siliceous gravel, and granite) represent a considerable range in mineralogy. Moisture damage was monitered as a change in dynamic modulus with load cycles. The analysis demonstrates the need to consider mixture compliance as well as bond energy in order to predict moisture damage. Mixtures with the two types of bitumen and each aggregate with and without hydrated lime were evaluated. The hydrated lime substantially improved the resistance of the mixture to moisture damage.
Download or read book Evaluation and Prevention of Water Damage to Asphalt Pavement Materials written by Byron E. Ruth and published by ASTM International. This book was released on 1985 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evaluation of Moisture Damage in Asphalt Mixtures by Tunnicliff and Root Procedure NCHRP 274 written by and published by . This book was released on 1990 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Water Sensitivity of Asphalt aggregate Mixes written by Ronald L. Terrel and published by National Research Council. This book was released on 1994 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: The research presented in this report was conducted to identify the important factors influencing the water sensitivity of asphalt paving mixtures, and to develop a test method to evaluate water sensitivity of asphalt concrete mixtures for mix design. The test method was to be performance related. A review of current procedures revealed that no single method was suitable for evaluation and related to field performance. Based on a hypothesis that air voids in the mixture may be the major source and cause of water damage, a test system was developed to evaluate the major factors that influence water sensitivity. The Environmental Conditioning System (ECS) was used to develop a test procedure that includes specimen preparation; measurement of permeability using air, water, or both; vacuum wetting; cycling at various temperatures; and continuous repeated loading while monitoring resilient modulus after each conditioning cycle.
Download or read book Comparative Evaluation of Moisture Susceptibility Test Methods for Routine Usage in Asphalt Mixture Design written by Christopher J. DeCarlo and published by . This book was released on 2020 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: Asphalt materials experience substantial amounts of environmental damage throughout their lives as surface layers in pavements. One of the most prominent forms of environmental damage, moisture-induced damage, is caused by the weakening of internal bonds of the material because of the presence of moisture in the voids of asphalt mixtures and is a common problem for asphalt pavements in wet climates. Moisture-induced damage is typically accounted for during asphalt mixture design by conducting performance tests to ensure the material is not susceptible to severe damage from moisture, although many of these methods have seen mixed amounts of success historically. The main objective of this study is to evaluate the ability of multiple asphalt mixture moisture susceptibility tests to identify good and poor performing mixtures with respect to moisture-induced damage to replace current mix design testing requirements. Ten plant-produced hot mix asphalt materials with established good and poor field moisture performance were subjected to various moisture susceptibility test methods. The results from these procedures are assessed to determine which procedure is most effective and practical as a moisture susceptibility test for routine usage during asphalt mixture design for transportation agencies. Results from this study suggest that performance tests with stiffness-based measurements, such as dynamic modulus paired with moisture conditioning and the saturated aging tensile stiffness procedure, show better correlation to field performance than traditional test methods such as AASHTO T-283, Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage, and that the Hamburg wheel tracker test is the most effective and practical test method to reliably identify mixtures prone to experiencing moisture-induced damage.
Download or read book Investigation of Conditions for Moisture Damage in Asphalt Concrete and Appropriate Laboratory Test Methods written by Qing Lü and published by . This book was released on 2005 with total page 900 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evaluation of Hot Mix Asphalt Moisture Sensitivity Using the Nottingham Asphalt Test Equipment written by Sunghwan Kim and published by . This book was released on 2005 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: Even though moisture sensitivity of Hot Mix Asphalt (HMA) mixtures has been recognized as a major form of distress in asphalt concrete pavements since the advent of asphalt paving technology, the mechanism of this problem has not been clearly identified until now. However, it has been agreed that it can be characterized by the loss of adhesive bond between the asphalt binder and the aggregate or by a softening of the cohesive bonds within the asphalt binder, both of which are due to the action of loading under traffic in the presence of moisture. The evaluation of Hot Mix Asphalt moisture sensitivity has been divided into two categories: visual inspection test and mechanical test. However, most of them have been developed in pre-Superpave mix design. This research was conducted to develop a new test protocol which can overcome the problems of the current procedures and to evaluate the possibility of using the Nottingham Asphalt Tester (NAT) in the resulting procedure.
Download or read book Methods to Predict and Control Moisture Damage in Asphalt Concrete written by Robert P. Lottman and published by . This book was released on 1988 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
